Synthesis and characterization of organo‐soluble poly(ether ether ketone)s and poly(ether ether ketone ketone)s containing pendant pentadecyl chains

Poly(ether ether ketone)s and poly(ether ether ketone ketone)s containing pendant pentadecyl chains were synthesized by polycondensation of each of the two bisphenol monomers viz, 1,1,1‐[bis(4‐hydroxyphenyl)‐4′‐pentadecylphenyl]ethane and 1,1‐bis(4‐hydroxyphenyl)‐3‐pentadecyl cyclohexane with activated aromatic dihalides namely, 4,4′‐difluorobenzophenone, and 1,3‐bis(4‐fluorobenzoyl)benzene in a solvent mixture of N,N‐dimethylacetamide and toluene, in the presence of anhydrous potassium carbonate. Polymers were isolated as white fibrous materials with inherent viscosities and number average molecular weights in the range 0.70–1.27 dL g^?1 and 76,620–1,36,720, respectively. Poly(ether ether ketone)s and poly(ether ether ketone ketone)s were found to be soluble at room temperature in organic solvents such as chloroform, dichloromethane, tetrahydrofuran, and pyridine and could be cast into tough, transparent, and flexible films from their solutions in chloroform. Wide angle X‐ray diffraction patterns exhibited a broad halo at around 2θ = ～ 19° indicating that the polymers containing pentadecyl chains were amorphous in nature. In the small‐angle region, diffuse reflections of a typically layered structures resulting from the packing of pentadecyl side chains were observed. The temperature at 10% weight loss, obtained from TG curves, for poly(ether ether ketone)s and poly(ether ether ketone ketone)s were in the range 416–459°C, indicating their good thermal stability. A substantial drop in glass transition temperatures (68–78°C) was observed for poly(ether ether ketone)s and poly(ether ether ketone ketone)s due to “internal plasticization” effect of flexible pendant pentadecyl chains. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Aromatic polyesters containing pendent 4-(phenylsulfonyl)phenyl groups: synthesis and characterization

A new bisphenol, 1,1-bis-[(4-hydroxyphenyl)-1-(4-phenylsulfonyl)phenyl)]ethane (DPSBP) was synthesized starting from diphenylsulfide and was characterized by spectroscopic methods. DPSBP was polycondensed with isophthalic acid chloride (IPC), terephthalic acid chloride (TPC) and a mixture of IPC and TPC (50:50 mol%) by phase-transfer catalysed interfacial polymerization method to obtain aromatic polyesters containing pendent 4-(phenylsulfonyl)phenyl groups. A series of copolyesters was also obtained by polycondensation of varying molar proportions of DPSBP and bisphenol-A (BPA) with TPC. (Co)polyesters exhibited inherent viscosities in the range 0.56–1.57 dLg^?1 and number average molecular weights (Mn) were in the range 28,650–80,230 g/mol. Polyesters dissolved readily in common organic solvents such as dichloromethane, chloroform, tetrahydrofuran and aprotic polar solvents such as N-methylpyrrolidone, and N,N-dimethylacetamide. Tough, transparent and flexible films of polyesters could be cast from their chloroform solutions. X-Ray diffraction studies indicated amorphous nature of aromatic polyesters. Polyesters showed T_g values in the range 223–257 °C while T₁₀ values were in the range of 469–484 °C indicating their excellent thermal stability.     

Synthesis and properties of poly(arylene ether)s based on 3‐pentadecyl 4,4'‐biphenol

A new biphenol, 3‐pentadecyl 4,4′‐biphenol, was synthesized starting from 3‐pentadecylphenol and was polycondensed with 4,4′‐difluorobenzophenone, 1,3‐bis(4‐fluorobenzoyl)benzene and bis(4‐fluorophenyl)sulfone to obtain poly(arylene ether)s with biphenylene linkages in the backbone and pendent pentadecyl chains. Inherent viscosities and number‐average molecular weights (M_n) of the poly(arylene ether)s were in the range 0.50 ? 0.81 dL g^?1 and 2.2 × 10⁴ ? 8.3 × 10⁴, respectively. Detailed NMR spectroscopic studies of the poly(arylene ether)s indicated the presence of constitutional isomerism which existed because of the non‐symmetrical structure of 3‐pentadecyl 4,4′‐biphenol. The poly(arylene ether)s readily dissolved in common organic solvents such as dichloromethane, chloroform and tetrahydrofuran and could be cast into tough, transparent and flexible films from their chloroform solutions. The poly(arylene ether)s exhibited T_g values in the range 35–60 °C which are lower than that of reference poly(arylene ether)s without pentadecyl chains. The 10% decomposition temperatures (T₁₀) of the poly(arylene ether)s were in the range 410–455 °C indicating their good thermal stability. A gas permeation study of poly(ether sulfone) containing pendent pentadecyl chains revealed a moderate increase in permeability for helium, hydrogen and oxygen. However, there was a large increase in permeability for carbon dioxide which could be attributed to the internal plasticization effect of pendent pentadecyl chains. © 2016 Society of Chemical Industry     

Biodegradable polymers based on renewable resources. III. copolyesters composed of 1,4:3,6‐dianhydro‐D‐glucitol, 1,1‐bis(5‐carboxy‐2‐furyl)ethane and aliphatic dicarboxylic acid units

Various copolyesters were synthesized by bulk polycondensation of the respective combinations of 1,4;3,6‐dianhydro‐D ‐glucitol (1) as the diol component and 1,1‐bis[5‐(methoxycarbonyl)‐2‐furyl]ethane (3b) and seven dimethyl dialkanoates with methylene chain lengths of 4, 5, 6, 7, 8, 10, and 12 (4a–4g) as the dicarboxylic acid components. Most of the copolyesters were amorphous, while a copolyester composed of 1, 3b, and dodecanedioic acid (4g) (3b:4g = 25:75) units as well as homopolyesters derived from 1 and azelaic acid (4d), sebacic acid (4e), and dodecandioic acid (4g), respectively, were partially crystalline. All these homo‐ and copolyesters were soluble in chloroform, dichloromethane, pyridine, trifluoroacetic acid, and m‐cresol. The number‐average molecular weights of these polyesters were estimated to be in the range of 10,000–20,000 by SEC using chloroform as an eluent and standard polystyrene as a reference. The biodegradability of these copolyesters was assessed by enzymatic degradation using four different enzymes in a phosphate buffer solution at 37°C and by soil burial degradation tests in composted soil at 27°C. In general, biodegradability of the copolyesters decreased with increase in the difuran dicarboxylate 3b content. Copolyesters containing sebasic acid 4e units showed higher biodegradability. Soil burial degradation in the soil that was treated with antibiotics, together with electron microscopic observation, indicated that actinomycetes are mainly responsible for the degradation of the copolyesters containing 3b units in the present soil burial test. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 3342–3350, 1999     

New poly(1,3,4‐oxadiazole)s bearing pentadecyl side chains: Synthesis and characterization

The 4‐[4′‐(Hydrazinocarbonyl)phenoxy]‐2‐pentadecylbenzohydrazide was polycondensed with aromatic diacid chlorides viz., terephthalic acid chloride (TPC), isophthalic acid chloride (IPC), and a mixture of TPC : IPC (50 : 50 mol %) to obtain polyhydrazides which on subsequent cyclodehydration reaction in the presence of phosphoryl chloride yielded new poly(1,3,4‐oxadiazole)s bearing flexibilizing ether linkages and pentadecyl side chains. Inherent viscosities of polyhydrazides and poly(1,3,4‐oxadiazole)s were in the range 0.53–0.66 dL g^?1 and 0.49–0.53 dL g^?1, respectively, indicating formation of medium to reasonably high molecular weight polymers. The number average molecular weights (M_n) and polydispersities (M_w/M_n) of poly(1,3,4‐oxadiazole)s were in the range 14,660–21,370 and 2.2–2.5, respectively. Polyhydrazides and poly(1,3,4‐oxadiazole)s were soluble in polar aprotic solvents such as N,N‐dimethylacetamide, 1‐methyl‐2‐pyrrolidinone, and N,N‐dimethylformamide. Furthermore, poly(1,3,4‐oxadiazole)s were also found to be soluble in solvents such as chloroform, dichloromethane, tetrahydrofuran, pyridine, and m‐cresol. Transparent, flexible, and tough films of polyhydrazides and poly(1,3,4‐oxadiazole)s could be cast from N,N‐dimethylacetamide and chloroform solutions, respectively. Both polyhydrazides and poly(1,3,4‐oxadiazole)s were amorphous in nature and formation of layered structure was observed due to packing of pentadecyl chains. A decrease in glass transition temperature was observed both in polyhydrazides (143–166°C) and poly(1,3,4‐oxadiazole)s (90–102°C) which could be ascribed to “internal plasticization” effect of pentadecyl chains. The T₁₀ values, obtained from TG curves, for poly(1,3,4‐oxadiazole)s were in the range of 433–449°C indicating their good thermal stability. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci 124:1281–1289, 2012     

Organosoluble and light‐colored fluorinated polyimides derived from 5,5′‐bis[4‐(4‐amino‐2‐trifluoromethylphenoxy) phenyl]‐4,7‐methanohexahydroindan

A novel bis(ether amine) monomer, 5,5′‐bis[4‐(4‐amino‐2‐trifluoromethylphenoxy)phenyl]‐4,7‐methanohexahydroindan ( 2 ), was synthesized through the nucleophilic aromatic substitution reaction of 5,5′‐bis‐(4‐hydroxyphenyl)‐4,7‐methanohexahydroindan with 2‐chloro‐5‐nitrobenzotrifluoride to yield the intermediate dinitro compound, followed by catalytic reduction with hydrazine and Pd/C. A series of polyimides were synthesized from 2 and various aromatic dianhydrides using a standard two‐stage process with chemical or thermal imidization of poly(amic acid). All of these polymer films were soluble in amide‐type solvents above 10% w/v, had tensile strengths of 97–117 MPa, and the 10% weight loss temperature was above 464 °C with their residues exceeding 46% at 800 °C in nitrogen. Compared with the non‐fluorinated polyimides, the fluorinated series were observed to have lower dielectric constants (2.92–3.28 at 1 MHz) and lower moisture absorptions (0.15–0.43 wt%) as well as lower color intensity and better solubility. Copyright © 2006 Society of Chemical Industry     

Novel poly(amide‐hydrazide)s and copoly(amide‐hydrazide)s from bis‐(4‐aminobenzyl) hydrazide and aromatic diacid chlorides: Synthesis and characterization

A new aromatic diamine, viz., bis‐(4‐aminobenzyl) hydrazide (BABH), which contains preformed hydrazide and methylene linkage, was synthesized starting from α‐tolunitrile. The BABH and intermediates involved in its synthesis were characterized by spectroscopic methods. Novel poly(amide‐hydrazide)s were synthesized by low temperature solution polycondensation of BABH with isophthaloyl chloride (IPC) and terephthaloyl chloride (TPC). Furthermore, two series of copoly(amide‐hydrazide)s, based on different mol % of BABH and bis‐(4‐aminophenyl) ether (ODA) with IPC/TPC were also synthesized. Poly(amide‐hydrazide)s and copoly(amide‐hydrazide)s were characterized by inherent viscosity [η_inh], FTIR, solubility, X‐ray diffraction (XRD), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The polycondensation proceeded smoothly and afforded the polymers with inherent viscosities in the range of 0.18–0.93 dL/g in (NMP + 4% LiCl) at 30°C ± 0.1°C. These polymers dissolved in DMAc, NMP or DMSO containing LiCl. The solubility of copolymers was considerably improved in line with less crystalline nature due to random placement of constituent monomers during the copolymerization. XRD data indicated that poly(amide‐hydrazide)s from BABH alone and IPC/TPC had higher crystallinity than the corresponding copoly(amide‐hydrazide)s derived from a mixture of BABH and bis‐(4‐aminophenyl) ether (ODA). Polymers showed initial weight loss around 160°C which is attributed to the cyclodehydration leading to the formation of corresponding poly(amide‐oxadiazole)s. Copolyamide‐hydrazides showed T_max between 400 and 540°C which is essentially the decomposition of poly(amide‐oxadiazole)s. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis and characterization of readily soluble polyarylates derived from either 1,1‐bis(4‐hydroxyphenyl)‐1‐phenylethane or tetramethylbisphenol A and aromatic diacid chlorides

A series easily soluble polyarylates were synthesized from either 1,1‐bis(4‐hydroxyphenyl)‐1‐phenylethane or tetramethylbisphenol A with various aromatic diacid chlorides by the two‐phase interfacial polycondensation. These polyarylates have the inherent viscositiesin the range of 0.36–0.97 dL/g, and their number‐average and weight‐average molecular weights determined by gel permeation chromatography are 14,200–43,200 and 31,900–102,500, respectively. All these polyarylates are readily soluble in a wide range of organic solvents, thus these polymers can be convenient to process into heat resistance films by cast, spin‐ or dip‐coating. The polyarylates have the glass transition temperatures in the range of 165.0–201.6°C. The pendent phenyl‐containing polyarylates reveal excellent thermal stability, and their initial degradation temperatures are all above 480°C and char yields at 700°C are 37.97–40.53% in nitrogen atmosphere. However, the polymers prepared from tetramethylbisphenol A have a large decrease in thermal stability, and their initial degradation temperatures in nitrogen are only about 440°C. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis,characterization, and hydrolytic degradation of copolyesters of 3‐(4‐hydroxyphenyl) propionic acid and p‐hydroxybenzoic acid,vanilic acid,or syringic acid

A series of copolyesters were prepared by a direct polycondensation of 3‐(4‐hydroxyphenyl) propionic acid and p‐hydroxybenzoic acid (HBA), vanilic acid (VA), or syringic acid (SGA) of different composition in pyridine using diphenyl chlorophosphate and lithium bromide as condensing agents. The effects of methoxy substitution in the benzene ring and copolymer composition on the synthesis and thermal properties as well as hydrolytic degradation were examined. The methoxy substitution increased a glass transition temperature and a solubility, while it decreased a crystallinity and a thermal stability. The HBA series copolyesters showed a homogenous nematic phase, while the VA and SGA series copolyestes neither revealed an anisotropic melt nor formed a mobile melt below around 350°C. The hydrolytic degradation of melt‐pressed films was performed in a 5% sodium hydroxide aqueous solution at 40°C to test a biodegradability of the copolyesters. HBA‐50 and HBA‐30 exhibited the much higher degradation rate than HBA‐70, showing that the aliphatic ester linkage was more degradable than aromatic one. The degradation rates of VA‐50 and SGA‐50 were remarkably slower than that of HBA‐50 due to the steric hindrance of the methoxy group in the ortho position. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 78: 2474–2481, 2000     

First identification of biradicals during thermal [2π + 2π] cyclopolymerization of trifluorovinyl aromatic ethers

The thermal cyclopolymerization of three trifluorovinyl aromatic ether monomers 1,1,1‐tris (4‐trifluorovinyloxyphenyl)ethane (1), 4,4′‐bis(4‐trifluorovinyloxy)biphenyl (2) and 2,2‐bis(4‐trifluorovinyloxy‐ phenyl)‐1,1,1,3,3,3‐hexafluoropropane (3) were monitored in situ using time‐resolved electron paramagnetic resonance spectroscopy over a temperature range of 150–210 °C. The signals observed during the early stages of perfluorocyclobutyl polymer production suggest the formation of a triplet state corresponding to the proposed biradical intermediate with a strong dipole–dipole interaction. A doublet splitting shows the presence of hyperfine coupling due to fluorine. The characterization of radical species formed during the polymerization of monomer 1 using model compounds and polymerization kinetics of monomer 2 are also presented. Copyright © 2007 Society of Chemical Industry     

Synthesis and characterization of novel polyaspartimides derived from 2,2′‐dimethyl‐4,4′‐bis(4‐maleimidophenoxy)biphenyl and various diamines

A novel bismaleimide, 2,2′‐dimethyl‐4,4′‐bis(4‐maleimidophenoxy)biphenyl, containing noncoplanar 2,2′‐dimethylbiphenylene and flexible ether units in the polymer backbone was synthesized from 2,2′‐dimethyl‐4,4′‐bis(4‐aminophenoxy)biphenyl with maleic anhydride. The bismaleimide was reacted with 11 diamines using m‐cresol as a solvent and glacial acetic acid as a catalyst to produce novel polyaspartimides. Polymers were identified by elemental analysis and infrared spectroscopy, and characterized by solubility test, X‐ray diffraction, and thermal analysis (differential scanning calorimetry and thermogravimetric analysis). The inherent viscosities of the polymers varied from 0.22 to 0.48 dL g⁻¹ in concentration of 1.0 g dL⁻¹ of N,N‐dimethylformamide. All polymers are soluble in N‐methyl‐2‐pyrrolidone, N,N‐dimethylacetamide, N,N‐dimethylformamide, dimethylsulfoxide, pyridine, m‐cresol, and tetrahydrofuran. The polymers, except PASI‐4, had moderate glass transition temperature in the range of 188°–226°C and good thermo‐oxidative stability, losing 10% mass in the range of 375°–426°C in air and 357°–415°C in nitrogen. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 279–286, 1999     

Synthesis and characterization of aromatic polyesters and copolyesters from 4,4′‐(1‐hydroxyphenylidene)diphenol and 4,4′‐(9‐fluorenylidene)diphenol

Two isophthalic polyesters from 4,4′‐(1‐hydroxyphenylidene)diphenol (BAP/ISO) and 4,4′‐(9‐fluorenylidene)diphenol (BF/ISO), and three different copolyesters containing 75, 50, and 25 mol % of BAP/ISO were synthesized by interfacial polycondensation. This preparation method yielded polymers and copolymers that produced flexible and transparent films when they were cast from solution. Proton NMR spectrometry studies showed that the isophthalic copolyesters were obtained as random copolymers with differences in comonomer composition no larger than 2.5 mol % with respect to the expected compositions. Wide‐angle X‐ray diffraction measurements indicated that all the polyesters and copolyesters were amorphous. The copolyesters showed amorphous patterns with maxima that fell between those of the polyesters. It was also found that thermal properties such as glass‐transition temperature, onset of decomposition temperature, thermal stability, dynamic mechanical storage modulus, and maximum on the α‐transition of the damping factor tan δ of BF/ISO were higher than those of BAP/ISO. The values of these thermal properties in the copolyesters fell between those of the polyesters and were dependent on the amounts of BF/ISO and BAP/ISO present in the copolyester in a linear fashion. Therefore, the thermal properties of a given copolyester can be predicted directly from the comonomers' composition. Overall, it shows that the interfacial polycondensation method is suitable to obtain these copolyesters in a controlled manner and that their properties can be tailored to be between those of the homopolyesters. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2515–2522, 2002     

Synthesis and properties of fluorinated polyimides from 1,1‐bis(4‐amino‐3,5‐dimethylphenyl)‐1‐(3,4,5‐trifluorophenyl)‐2,2,2‐trifluoroethane and various aromatic dianhydrides

A novel aromatic diamine, 1,1‐bis(4‐amino‐3,5‐dimethylphenyl)‐1‐(3,4,5‐trifluorophenyl)‐2,2,2‐trifluoroethane, containing a pendant polyfluorinated phenyl group, a trifluoromethyl group, and methyl groups ortho‐substituted to the amino groups in the structure was synthesized and characterized. The diamine was polymerized with several aromatic dianhydrides, including 3,3′,4,4′‐biphenyltetracarboxylic dianhydride, 3,3′,4,4′‐benzophenonetetracarboxylic dianhydride, 4,4′‐oxydiphthalic anhydride, and 4,4′‐hexafluoroisopropylidene diphthalic anhydride, via a high‐temperature one‐step procedure to afford four polyimides (PIs) with inherent viscosities of 0.47–0.70 dL/g. The PIs exhibited excellent solubilities in a variety of organic solvents. They were soluble not only in polar aprotic solvents but in many common solvents, such as cyclopentanone, tetrahydrofuran, and even toluene at room temperature. The tough and flexible PI films cast from the PI solutions exhibited good thermal stabilities and acceptable tensile properties. The glass‐transition temperatures were in the range 312–365°C, and the 5% weight loss temperatures were all higher than 480°C in nitrogen. The films had tensile strengths in the range 76–99 MPa, tensile moduli of 2.2–2.8 GPa, and elongations at break of 5–8%. In addition, the PI films exhibited excellent transparency in the visible light region with cutoff wavelength as low as 302 nm and transmittance higher than 88% at the wavelength of 450 nm. The PI films showed low dielectric constants ranging from 2.50–2.68 and low moisture absorptions of less than 0.56%. The good combined properties of the PIs mainly resulted from the synergic effects of the different substituents. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Organosoluble,low‐dielectric‐constant fluorinated polyimides based on 9,9‐bis[4‐(4‐amino‐2‐trifluoromethyl‐ phenoxy)phenyl]xanthene

A new trifluoromethylated bis(ether amine) monomer, 9,9‐bis[4‐(4‐amino‐2‐trifluoromethylphenoxy)phenyl]xanthene (BATFPX), was prepared through the nucleophilic aromatic substitution reaction of 2‐chloro‐5‐nitrobenzotrifluoride and 9,9‐bis(4‐hydroxyphenyl)xanthene in the presence of potassium carbonate, followed by catalytic reduction with hydrazine and Pd/C in ethanol. A series of novel fluorinated polyimides were synthesized from BATFPX with various commercially available aromatic tetracarboxylic dianhydrides by one‐step polycondensation in m‐cresol. The resulting polyimides were readily soluble in many organic solvents such as N,N‐dimethylacetamide and tetrahydrofuran, and afforded transparent, flexible and strong films with low moisture absorption (0.28–0.51%), low dielectric constant (2.85–3.26 at 1 MHz) and good optical transparency with UV‐visible absorption cut‐off wavelengths at 352–410 nm. All the polyimides were amorphous and exhibited high thermal stability, with glass transition temperatures of 282–330 °C, 5% weight loss temperatures above 520 °C in nitrogen or air and char yields higher than 55% at 800 °C in nitrogen. Also, these polyimides had good mechanical properties with tensile strengths of 93–118 MPa, elongations at break of 9–16% and initial moduli of 2.07–2.58 GPa. Copyright © 2011 Society of Chemical Industry     

Linear polymers with sulfur in the main chain. II. Synthesis of polyesters by interfacial polycondensation of bis(4,4′‐hydroxyphenyl)sulfide with several aliphatic acid dichlorides and their properties

The synthesis and properties of sulfur‐containing polyesters derived from bis(4,4′‐hydroxyphenyl)sulfide (TDP) and various acid dichlorides (AC) have been studied to evaluate the effect of the incorporation of sulfur in the main chains of polyesters. Polyesters derived from TDP and AC (with methylene numbers of 2–10) were synthesized by interfacial polycondensation in a 1,1,2,2‐tetrachloroethane /water mixture using tetra‐n‐butyl ammonium bromide as a phase transfer catalyst. Through the use of gel permeation chromatography, it was determined that the polyesters thus obtained had high molecular weights. The thermal properties of the polyesters including the TDP moiety were evaluated by thermogravimetry/differential thermal analysis and by differential scanning calorimetry. The analyses indicated that the polyesters including the TDP moiety were crystalline polymers with relatively high heat resistance. These polyesters were found to show an odd–even effect with the glass transition temperature and the melting point based on the methylene numbers. The tensile strength and storage modulus decreased with the methylene numbers. It was further found that the polyesters evidenced excellent barrier properties towards oxygen gas having an odd–even effect. In particular, it was shown that the polyesters with methylene numbers of 3, 4, 6, and 8 of methylene units have lower oxygen permeability than poly(ethylene terephthalate) (PET).©2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1865–1872, 2004     

Synthesis and properties of novel organosoluble bismaleimides and polyaspartimides containing bis(4‐maleimido‐3, 5‐dimethyl phenyl) halo phenyl methane

A series of bismaleimides was synthesized from bis(4‐amino‐3, 5‐dimethylphenyl) (X) phenyl methane (X = 3′chloro, 3′‐bromo, 3′‐benzyloxy, 4′‐chloro, 4′‐fluoro) and maleic anhydride. The bismaleimides were subsequently polymerized with various diamines by Michael addition to yield novel polyaspartimides. All the polymers exhibited good solubility in organic solvents and the inherent viscosity of the polymers were in the range of 0.40–0.56 dL/g, which is good enough to fabricate composites and films. The temperature at which 10% weight loss occurred was in the range of 390–441°C. The polymers had high glass transition temperature in the range of 205–275°C and left about 31.95–84.20% char yield at 800°C indicating that they have good self‐extinguishing property. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Thermal and electrical properties of copoly(1,3,4‐oxadiazole‐ethers) containing fluorene groups

A series of aromatic copolyethers containing 1,3,4‐oxadiazole rings and fluorene groups was prepared by nucleophilic substitution polymerization technique of 9,9‐bis(4‐hydroxyphenyl)fluorene, 1 , or of different amounts of 1 and an aromatic bisphenol, such as 4,4′‐isopropylidenediphenol or phenolphthalein, with 2,5‐bis(p‐fluorophenyl)‐1,3,4‐oxadiazole. The polymers were easily soluble in polar solvents like N‐methylpyrrolidone, N,N‐dimethylacetamide, N,N‐dimethylformamide, and chloroform and can be cast from solutions into thin flexible films. They showed high thermal stability, with decomposition temperature being above 425°C. The polymers exhibited a glass‐transition temperature in the range of 195–295°C, with a reasonable interval between glass‐transition and decomposition temperature. Electrical insulating properties of some polymer films were evaluated on the basis of dielectric constant and dielectric loss and their variation with frequency and temperature. The values of the dielectric constant at 10 kHz and 20°C were in the range of 3.16–3.25. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Organosoluble and light‐colored fluorinated polyimides based on 2,2‐bis[4‐(4‐amino‐2‐trifluoromethylphenoxy)phenyl]propane and aromatic dianhydrides

A novel fluorinated diamine monomer, 2,2‐bis[4‐(4‐amino‐2‐trifluoromethylphenoxy)phenyl]propane (2), was prepared through the nucleophilic substitution reaction of 2‐chloro‐5‐nitrobenzotrifluoride with 2,2‐bis(4‐hydroxyphenyl)propane in the presence of potassium carbonate, followed by catalytic reduction with hydrazine and Pd/C. Polyimides were synthesized from diamine 2 and various aromatic dianhydrides 3a–f via thermal imidization. These polymers had inherent viscosities ranging from 0.73 to 1.29 dL/g. Polyimides 5a–f were soluble in amide polar solvents and even in less polar solvents. These films had tensile strengths of 87–100 MPa, elongations to break of 8–29%, and initial moduli of 1.7–2.2 GPa. The glass transition temperatures (T_g) of 5a–f were in the range of 222–271°C, and the 10% weight loss temperatures (T₁₀) of them were all above 493°C. Compared with polyimides 6 series based on 2,2‐bis[4‐(4‐aminophenoxy)phenyl]propane (BAPP) and polyimides 7 based on 2,2‐Bis[4‐(4‐aminophenoxy)phenyl]hexafluoropropane (6FBAPP), the 5 series showed better solubility and lower color intensity, dielectric constant, and lower moisture absorption. Their films had cutoff wavelengths between 363 and 404 nm, b* values ranging from 8 to 62, dielectric constants of 2.68–3.16 (1 MHz), and moisture absorptions in the range of 0.04–0.35 wt %. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 95: 922–935, 2005     

Synthesis and characterization of new cardo poly(ether imide)s derived from 9,9‐bis [4‐(4‐aminophenoxy)phenyl]xanthene

A series of new cardo poly(ether imide)s bearing flexible ether and bulky xanthene pendant groups was prepared from 9,9‐bis[4‐(4‐aminophenoxy)phenyl]xanthene with six commercially available aromatic tetracarboxylic dianhydrides in N,N‐dimethylacetamide (DMAc) via the poly(amic acid) precursors and subsequent thermal or chemical imidization. The intermediate poly(amic acid)s had inherent viscosities between 0.83 and 1.28 dL/g, could be cast from DMAc solutions and thermally converted into transparent, flexible, and tough poly(ether imide) films which were further characterized by X‐ray and mechanical analysis. All of the poly(ether imide)s were amorphous and their films exhibited tensile strengths of 89–108 MPa, elongations at break of 7–9%, and initial moduli of 2.12–2.65 GPa. Three poly(ether imide)s derived from 4,4′‐oxydiphthalic anhydride, 4,4′‐sulfonyldiphthalic anhydride, and 2,2‐bis(3,4‐dicarboxyphenyl))hexafluoropropane anhydride, respectively, exhibited excellent solubility in various solvents such as DMAc, N,N‐dimethylformamide, N‐methyl‐2‐pyrrolidinone, pyridine, and even in tetrahydrofuran at room temperature. The resulting poly(ether imide)s with glass transition temperatures between 286 and 335°C had initial decomposition temperatures above 500°C, 10% weight loss temperatures ranging from 551 to 575°C in nitrogen and 547 to 570°C in air, and char yields of 53–64% at 800°C in nitrogen. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis and properties of new aromatic copolyesters containing phosphorous cyclic bulky groups

A series of phosphorus‐containing copolyesters was prepared by polycondensation of 2‐(6‐oxido‐6H‐dibenz<c,e><1,2>oxaphosphorin‐6‐yl)‐1,4‐naphthalene diol, 1 , or of an equimolecular amount of 1 and different bisphenols 2 , such as 4,4′‐isopropylidenediphenol, 4,4′‐(hexafluoroisopropylidene)diphenol and 2,7‐dihydroxynaphthalene, with an aromatic diacid chloride containing two preformed ester groups 3 , namely, terephthaloyl‐bis‐(4‐oxybenzoyl‐chloride). The copolyesters exhibited good thermal stability having the temperature of 5% weight loss above 380°C and char yield at 700°C in the range of 20–31.2%. The glass transition temperature was in the range of 136–147°C. The polymers exhibited thermotropic liquid crystalline behavior, as was observed with polarized optical microscopy, differential scanning calorimetry, and X‐ray experiments. POLYM. ENG. SCI., 2010. © 2010 Society of Plastics Engineers