Fluorescent chemosensor based on the conjugated polymer incorporating 2,2′‐bipyridyl moiety for transition metal ions

A fluorescent conjugated polymer was synthesized by the polymerization of 1,4‐dibromo‐2,3‐bisbutoxynaphthalene ( M‐2 ) with 5,5′‐divinyl‐2,2′‐bipyridine ( M‐3 ) via Heck reaction. The conjugated polymer shows strong blue–green fluorescence because of the extended π‐electronic structure between the repeating unit 2,3‐bisbutoxynaphthyl group and the conjugated linker 2,2′‐bipyridyl (bpy = 2,2′‐bipyridine) moiety via vinylene bridge. The responsive properties of the conjugated polymer on transition metal ions were investigated by fluorescent and UV–vis spectra. The results show that Cu²⁺ and Ni²⁺ can form nonradiative metal‐to‐ligand charge‐transfer complexes with the polymer, whereas, Zn²⁺ and Cd²⁺ do not produce the pronounced differences from the polymer fluorescence and UV–vis spectra. The fluorescent quenching can probably be attributed to the intramolecular photoinduced electron transfer (PET) or photoinduced charge transfer (PCT). The results can also suggest that 2,2′‐bipyridyl moiety in the main chain backbone of the conjugated polymer can act as the recognition site of a special fluorescent chemosensor for sensitive detection of transition metal ions. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Study of the synthesis of chitosan derivatives containing benzo‐21‐crown‐7 and their adsorption properties for metal ions

Three new chitosan crown ethers, N‐Schiff base‐type chitosan crown ethers (I, III), and N‐secondary amino type chitosan crown ether (II) were prepared. N‐Schiff base‐type chitosan crown ethers (I, III) were synthesized by the reaction of 4′‐formylbenzo‐21‐crown‐7 with chitosan or crosslinked chitosan. N‐Secondary amino type chitosan‐crown ether (II) was prepared through the reaction of N‐Schiff base type chitosan crown ether (I) with sodium brohydride. Their structures were characterized by elemental analysis, infrared spectra analysis, X‐ray diffraction analysis, and solid‐state ¹³C NMR analysis. In the infrared spectra, characteristic peaks of C?N stretch vibration appeared at 1636 cm^?1 for I and 1652 cm^?1 for II; characteristic peaks of N? H stretch vibration appeared at 1570 cm^?1 in II. The X‐ray diffraction analysis showed that the peaks at 2θ = 10° and 28° disappeared in chitosan derivatives I and III, respectively; the peak at 2θ = 10° disappeared and the peak at 2θ = 28° decreased in chitosan‐crown ether II; and the peak at 2θ = 20° decreased in all chitosan derivatives. In the solid‐state ¹³C NMR, characteristic aromatic carbon appeared at 129 ppm in all chitosan derivatives, and the characteristic peaks of carbon in C?N groups appeared at 151 ppm in chitosan crown ethers I and III. The adsorption and selectivity properties of I, II, and III for Pd²⁺, Au³⁺, Pt⁴⁺, Ag⁺, Cu²⁺, and Hg²⁺ were studied. Experimental results showed these adsorbents not only had good adsorption capacities for noble metal ions Pd²⁺, Au³⁺, Pt⁴⁺, and Ag⁺, but also high selectivity for the adsorption of Pd²⁺ with the coexistence of Cu²⁺ and Hg²⁺. Chitosan‐crown ether II only adsorbs Hg²⁺ and does not adsorbs Cu²⁺ in an aqueous system containing Pd²⁺, Cu²⁺, and Hg²⁺. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 1886–1891, 2002     

A highly selective ratiometric fluorescent sensor for Hg2+ based on 1,8‐naphthalimide

A sulfur probe based on 1,8‐naphthalimide was designed and synthesised, and its sensing behaviour towards a mercury ion was investigated by fluorescence spectroscopy. The probe showed higher selective recognition towards Hg²⁺ than towards other metal ions in methanol solution. Compared with 4‐amino‐substituted naphthalimide derivatives, the probe exhibited different fluorescent characteristics for sensing Hg²⁺. The novel, reaction‐based probe is recommended for selective recognition of Hg²⁺ with significant fluorescence change.     

Synthesis and adsorption properties,toward some heavy metal ions,of a new polystyrene‐based terpyridine polymer

A novel polymeric ligand having 2,2′:6′,2″‐terpyridine as pendant group was prepared through a Williamson type etherification approach for the reaction between 4′‐hydroxy‐2,2′: 6′,2″‐terpyridine and the commercially available 4‐chloromethyl polystyrene. The chelating properties of the new polymer toward the divalent metal ions (Cu²⁺, Zn²⁺, Ni²⁺, and Pb²⁺) in aqueous solutions was studied by a batch equilibration technique as a function of contact time, pH, mass of resin, and concentration of metal ions. The amount of metal‐ion uptake of the polymer was determined by using atomic absorption spectrometry. Results of the study revealed that the resin exhibited higher capacities and a more pronounced adsorption toward Pb²⁺ and that the metal‐ion uptake follows the order: Pb²⁺ > Cu²⁺ > Zn²⁺ > Ni²⁺. The adsorption and binding capacity of the resin toward the various metal ions investigated are discussed. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis and photophysical behavior of a water‐soluble coumarin‐bearing polymer for proton and Ni2+ ion sensing

BACKGROUND: In recent years, many fluorescent chemosensors with various macromolecular structures have been prepared for the detection of protons or metal cations in the environment. Most of this research is focused on polymer sensors with fluorescent recognition sites in the main chain. In this case, the fluorescent recognition sites are covalently bonded to the polymer chain, and thus the polymer shows photophysical properties as a chemosensor for protons and metal ions. RESULTS: An acrylic monomer bearing coumarin moieties, 7‐hydroxy‐4‐methyl‐8‐(4′‐acryloylpiperazin‐1′‐yl)methylcoumarin, was synthesized. This was then copolymerized with N‐vinylpyrrolidone to obtain a blue fluorescent material. The fluorescent copolymer has good solubility in aqueous solution. Its main photophysical properties were determined in relation to its use as a sensor for protons and metal cations. It is an efficient ‘off‐on’ switcher for pH between 3.02 and 12.08. Additionally, the polymer sensor is selective to Ni²⁺ ions, with the increase in the fluorescence intensity depending on Ni²⁺ ion concentrations in the range 0.33 × 10^?5–7.67 × 10^?5 mol L^?1. CONCLUSION: The results suggest that this copolymer may offer potential as a reusable polymer sensor for protons and Ni²⁺ ions in aqueous solution. Copyright © 2009 Society of Chemical Industry     

Fluorene‐based conjugated polymer with tethered thymines: click postpolymerization synthesis and optical response to mercury(II)

A kind of fluorene‐based conjugated polymer with tethered thymine (T) groups {poly[(9,9‐dioctyl)‐2,7‐fluorene‐{9,9‐dioctyl‐4–1,2,3‐triazol‐[5‐(hydroxymethyl)tetrahydrofuran‐2‐yl]‐5‐methylpyrimidine‐2,4(1H,3H)‐dione}‐2,7‐fluorene]‐co‐[(9,9‐dioctyl)‐2,7‐fluorene‐4,7‐bis(5‐thiophen‐2‐yl)benzo‐2,1,3‐thiadiazole] ( P‐3 )} was successfully synthesized by a Cu(I)‐catalyzed click reaction between the acetylene‐substituted polymer precursor {poly[(9,9‐dioctyl)‐2,7‐fluorene‐(9,9‐dioctyl‐4‐phenylacetylene fluorene)]‐co‐[(9,9‐dioctyl)‐2,7‐fluorene‐4,7‐bis(5‐thiophen‐2‐yl)benzo‐2,1,3‐thiadiazole]} and 3′‐azido‐3′‐deoxythymidine. The chemical structures of the intermediates and target polymer were verified by Fourier transform infrared spectroscopy and ¹H‐NMR analyses. The specific binding with Hg²⁺ of P‐3 was corroborated by ultraviolet–visible spectroscopy and photoluminescence analyses against other metal ions. The results show that P‐3 possessed selectivity and sensitivity toward Hg²⁺. Around 77% of photoluminescence intensity of P‐3 was quenched when the concentration of Hg²⁺ reached 7.7 × 10^?4 M and with a detection limit in the range of about 4.8 μM. A comparison experiment suggested that a synergic effect of the tethered T and S atoms interrelated with Hg²⁺ existed in P‐3 . Most of the fluorescence intensity of P‐3 was recovered upon the addition of iodide anions to the P‐3 /Hg²⁺ complex; this suggested that P‐3 could be used as a potential reversible optical Hg²⁺ probe. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Polymer-based fluorescence sensor incorporating triazole moieties for Hg detection via click reaction

The polymer could be obtained by the polymerization of 1,4-dibutoxy-2,5-diethynylbenzene (M-1) with 1,4-diazidobenzene (M-2)via click reaction. The polymer show blue fluorescence. The responsive optical properties of the polymer on various transition metal ions were investigated by fluorescence spectra. Compared with other cations, such as Co²⁺, Ni²⁺, Ag⁺, Cd²⁺, Cu²⁺ and Zn²⁺, Hg²⁺ can exhibit the most pronounced fluorescence response of the polymer Hg²⁺ can exhibit the most pronounced fluorescence response of the polymer due to triazole moiety in the polymer main chain as the metal binding ligand. The results indicate this kind of conjugated polymer with triazole moiety synthesized by click reaction can be used as a selective fluorescence sensor for Hg²⁺ detection.     

Detection of heavy metal ions using a water‐soluble conjugated polymer based on thiophene and meso‐2,3‐dimercaptosuccinic acid

This work reports the synthesis of a new water‐soluble conjugated polymer, which interacts specifically with heavy metal ions such as lead and mercury. In order to produce such a material, the fluorescent properties of polythiophene, which constitutes the polymer backbone, were combined with the chelating capacity of meso‐2,3‐dimercaptosuccinic acid, which forms the side‐chain of the conjugated polymer. Thus, the new polymer acts as chemical complexing agent, the fluorescence of which is quenched in the presence of heavy metal ions. A possible explanation of the mechanism of such a variation is also discussed. The system presented is envisaged to be used as a sensor for heavy metal ions that appear as pollutants in the environment .     

An Efficient Lanthanide‐Dependent DNAzyme Cleaving 2′–5′‐Linked RNA

RNA can form two types of linkage. In addition to the predominant 3′–5′ linkage, 2′–5′‐linked RNA is also important in biology, medicine, and prebiotic studies. Here, in vitro selection was used to isolate a DNAzyme that specifically cleaves 2′–5′ RNA by using Ce³⁺ as the metal cofactor, but leaves the 3′–5′ counterpart intact. This Ce5 DNAzyme requires trivalent light lanthanide ions and shows a rate of 0.16 min^?1 in the presence of 10 μm Ce³⁺; the activity decreases with heavier lanthanide ions. This is the fastest DNAzyme reported for this reaction, and it might enable applications in chemical biology. As a proof‐of‐concept, using this DNAzyme, the reactions between phosphorothioate‐modified RNA and strongly thiophilic metals (Hg²⁺ and Tl³⁺) were studied as a function of pH.     

Molecularly imprinted fluorescent polymers as chemosensors for the detection of mercury ions in aqueous media

This article describes the investigation of molecularly imprinted fluorescent polymer membranes as sensing receptors for Hg²⁺ detection by an optical approach. The polymers were synthesized with 4‐vinylpyridine as a functional monomer and Hg²⁺ as a template; 9‐vinylcarbazole was used as both a complex‐forming agent and a fluorescence probe. The free‐radical polymerization was performed within a semicylindrical Teflon mold and was initiated by 2,2′‐azobisisobutyronitrile at 60°C. The template, ion‐bonded to pyridine and carbazole groups in the polymer membrane, was removed by acid treatment. Attenuated total reflectance–Fourier transform infrared (FTIR) spectroscopic measurements and scanning electron microscopy images were used to compare the chemistry and surface morphology, respectively, of both imprinted and nonimprinted polymer materials. The final polymer membranes with semicylindrical shapes were used directly to determine Hg²⁺ concentration in aqueous solutions by the monitoring of the fluorescence intensity of the carbazole groups quenched upon complex formation with metal ions. The values of the Hg²⁺ binding ratio for the imprinted and nonimprinted polymeric membranes were compared, and the results indicate the superior sensitivity and selectivity of the imprinted membranes. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis,characterization, and Pb2+ ion sensing application of hexa‐armed dansyl end‐capped poly(ε‐caprolactone) star polymer with phosphazene core

Novel hexa‐armed dansyl end‐capped poly(ε‐caprolactone) (PCL) star polymer with phosphazene core ( P2 ) was prepared via ring opening polymerization (ROP) and esterification reactions. P2 showed dual fluorescence emission when excited at 328 nm in acetonitrile : water (6 : 4) due to twisted intramolecular charge transfer (TICT) between dimethylamino and naphthalene units in the dansyl moiety. TICT emission band (A band) in the emission spectra red‐shifted with increasing solvent polarity. P2 responded to the addition of Pb²⁺, Hg²⁺, Co²⁺, Cd²⁺, Mn²⁺, and Zn²⁺ metal ions by decreasing TICT emission band with slight bathochromic shifts. The highest quenching efficiency was observed for Pb²⁺ ion with Stern–Volmer constant of 324.74M^?1. The Stern–Volmer plot for Pb²⁺ was rather linear with the increasing concentration of the quencher, indicating a dynamic (collisional) quenching mechanism. Stern–Volmer constants for Hg²⁺, Co²⁺, Cd²⁺, Mn²⁺, and Zn²⁺ ions were found to be 212.33, 189.21, 36.24, 20.84, and 20.69, respectively. Besides, the highest quenching efficiency (94.24%) was attained in the presence of Pb²⁺, suggesting that P2 could be employed as a potential Pb²⁺ chemical probe. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42380.     

Poly(2‐acrylamido glycolic acid‐co‐2‐acrylamido‐2‐methyl‐1‐propane sulfonic acid): Synthesis,characterization, and retention properties for environmentally impacting metal ions

Poly(2‐acrylamido glycolic acid‐co‐2‐acrylamido‐2‐methyl‐1‐propane sulfonic acid) [P(AGA‐co‐APSA)] was synthesized by radical polymerization in an aqueous solution. The water‐soluble polymer, containing secondary amide, hydroxyl, carboxylic, and sulfonic acid groups, was investigated, in view of their metal‐ion‐binding properties, as a polychelatogen with the liquid‐phase polymer‐based retention technique under different experimental conditions. The investigated metal ions were Ag⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Pb²⁺, and Cr³⁺, and these were studied at pHs 3, 5, and 7. P(AGA‐co‐APSA) showed efficient retention of all metal ions at the pHs studied, with a minimum of 60% for Co(II) at pH 3 and a maximum close to 100% at pH 7 for all metal ions. The maximum retention capacity (n metal ion/n polymer) ranged from 0.22 for Cd²⁺ to 0.34 for Ag⁺. The antibacterial activity of Ag⁺, Cu²⁺, Zn²⁺, and Cd²⁺ polymer–metal complexes was studied, and P(AGA‐co‐APSA)–Cd²⁺ presented selective antibacterial activity for Staphylococcus aureus with a minimum inhibitory concentration of 2 μg/mL. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

A highly selective and sensitive fluorescence chemosensor based on optically active polybinaphthyls for Hg

The chiral polymer was synthesized by the polymerization of 4,7-diethynylbenzo[2,1,3]-thiadiazole (M-1) with (R)-6,6′-dibutyl-3,3′-diiodo-2,2′-bis(diethylaminoethoxy)-1,1′-binaphthyl (R-M-1) via Pd-catalyzed Sonogashira reaction. The chiral polymer has orange fluorescence due to the extended π-electronic structure between binaphthyl unit and benzo[2,1,3]thiadiazole (BT) group via ethynyl bridge. The responsive optical properties of the polymer on various metal ions were investigated by fluorescence spectra. The fluorescence of the chiral polymer can produce the pronounced enhancement as high as 1.8-fold upon addition of 1:2 molar ratio of Hg²⁺. Compared with other cations, such as K⁺, Mg²⁺, Pb²⁺, Co²⁺, Ni²⁺, Ag⁺, Cd²⁺, Cu²⁺, Zn²⁺, Mn²⁺ and Fe³⁺, Hg²⁺ can produce the pronounced fluorescence response of the polymer. The result indicates this kind of chiral polybinaphthyls incorporating diethylamino and benzo[2,1,3]thiadiazole (BT) moieties as receptors exhibits highly sensitive and selective behavior for Hg²⁺ detection.     

基于冠醚的离子识别响应型智能材料研究新进展

金属离子对生物体的生命活动起着核心的作用,而一些重金属离子(如Pb²⁺、Hg²⁺)在很低浓度时就对生物具有极强的毒性;因此,研究具有金属离子识别特性的智能材料具有重要的理论价值和实用意义。冠醚具有选择性地络合金属离子的能力,研究者们将冠醚的离子识别特性与聚(N-异丙基丙烯酰胺)的相变行为特性相结合制备了一系列离子识别响应型智能材料。综述了近年来基于18-冠-6和15-冠-5两种冠醚分子的离子识别响应型智能材料的研究新进展。目前,基于冠醚的离子识别响应型智能材料仍多处于基础研究阶段,还需要进一步系统深入研究和开发完善。     

Synthesis and characterization of novel polyaspartimides derived from 2,2′‐dimethyl‐4,4′‐bis(4‐maleimidophenoxy)biphenyl and various diamines

A novel bismaleimide, 2,2′‐dimethyl‐4,4′‐bis(4‐maleimidophenoxy)biphenyl, containing noncoplanar 2,2′‐dimethylbiphenylene and flexible ether units in the polymer backbone was synthesized from 2,2′‐dimethyl‐4,4′‐bis(4‐aminophenoxy)biphenyl with maleic anhydride. The bismaleimide was reacted with 11 diamines using m‐cresol as a solvent and glacial acetic acid as a catalyst to produce novel polyaspartimides. Polymers were identified by elemental analysis and infrared spectroscopy, and characterized by solubility test, X‐ray diffraction, and thermal analysis (differential scanning calorimetry and thermogravimetric analysis). The inherent viscosities of the polymers varied from 0.22 to 0.48 dL g⁻¹ in concentration of 1.0 g dL⁻¹ of N,N‐dimethylformamide. All polymers are soluble in N‐methyl‐2‐pyrrolidone, N,N‐dimethylacetamide, N,N‐dimethylformamide, dimethylsulfoxide, pyridine, m‐cresol, and tetrahydrofuran. The polymers, except PASI‐4, had moderate glass transition temperature in the range of 188°–226°C and good thermo‐oxidative stability, losing 10% mass in the range of 375°–426°C in air and 357°–415°C in nitrogen. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 279–286, 1999     

Physicochemical investigation of radiation‐grafted poly(acrylic acid)‐graft‐poly(tetrafluoroethylene–ethylene) copolymer membranes and their use in metal recovery from aqueous solution

ET‐g‐PAAc membranes were obtained by radiation grafting of acrylic acid onto poly(tetrafluoroethylene–ethylene) copolymer films using a mutual technique. The ion selectivity of the grafted membranes was determined toward K⁺, Ag⁺, Hg²⁺, Co²⁺, and Cu²⁺ in a mixed aqueous solution. The ion‐exchange capacity of the grafted membranes was measured by back titration and atomic absorption spectroscopy. The Hg²⁺ ion content of the membrane was more than that of either the K⁺ or Ag⁺ ions. The presence of metal ions in the membranes was studied by infrared and energy‐dispersive spectroscopy measurements. Scanning electron microscopy of the grafted and metal‐treated grafted membranes showed modification of the morphology of the surface due to the adsorption of K⁺ and Ag⁺ ions. No change was observed for the surface of the membrane that was treated with Hg²⁺ ions. The thermal stability of different membranes was improved more with Ag⁺ and Hg²⁺ ions than with K⁺ ions. It was found that the modified grafted membranes possessed good hydrophilicity, which may make them promising candidates for practical applications, such as for cation‐exchange membranes in the recovery of metals from an aqueous solution. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2692–2698, 2002     

A highly selective and sensitive benzothiazole‐based ‘turn‐on’ fluorescent sensor for Hg2+ ion

A simple benzothiazole‐based fluorescent probe (TDA) for the determination of Hg²⁺ ion in aqueous solutions was synthesised in one step and characterised by ¹H NMR, ¹³C NMR, APT, COSY, FTIR, and elemental analysis. TDA shows a significant fluorescence change upon the interaction of Hg²⁺ ion in DMF–water (v/v = 1/1), while only minor changes in fluorescence intensity are observed with 18 other metal ions. Fluorescence enhancement by a factor of 15 is achieved upon selective interaction with Hg²⁺ ion. The Hg²⁺ ion detection process is found to be pH dependent; therefore, TDA could be feasible within a pH range of 4.0–7.0.     

Synthesis and adsorption properties of macroporous cross‐linked polystyrene that contains an immobilizing 2,5‐dimercapto‐1,3,4‐thiodiazole with tetraethylene glycol spacers

A novel chelating resin macroporous cross‐linked polystyrene immobilizing 2,5‐dimercapto‐1,3,4‐thiodiazole via a hydrophilic tetraethylene glycol spacer (PS‐TEG‐BMT) is synthesized and the structure is characterized by means of Fourier transform infrared spectroscopy (FTIR), energy dispersive X‐ray microanalysis (EDX), and elementary analysis. Its adsorption capacity for several metal ions such as Hg²⁺, Ag⁺, Ni²⁺, Pb²⁺, Cd²⁺, Fe³⁺, Bi³⁺, Zn²⁺, and Cu²⁺ are investigated. The initial experimental result shows that this resin has higher adsorption selectivity for Hg²⁺ and Ni²⁺ than for the other metal ions and the introduction of hydrophilic TEG spacer is beneficial to increase adsorption capacities. The result also shows that the Langmuir model is better than the Freundlich model to describe the isothermal process of PS‐TEG‐BME resin for Hg²⁺. Five adsorption‐desorption cycles demonstrate that this resin are suitable for reuse without considerable change in adsorption capacity. POLYM. ENG. SCI., 45:1515–1521, 2005. © 2005 Society of Plastics Engineers     

Self‐assembly of ABA triblock copolymers based on functionalized polydimethylsiloxane and polymethyloxazoline

This study describes the responsive behavior of modified amphiphilic ABA triblock copolymers of polymethyloxazoline‐block‐poly(methylhydrosiloxane‐co‐dimethylsiloxane)‐block‐polymethyloxazoline (PMOX‐b‐P(MHS‐co‐DMS)‐b‐PMOX) when subjected to compression on the water surface or to ions in the water bulk phase. The hydrophobic middle block was functionalized with spacers bearing methyl 2‐hydroxybenzoate (Bz) or 18‐crown‐6 ether (Ce) groups. The behavior at the air–water interface was studied by measuring surface pressure versus mean molecular area (π–mmA) isotherms, and atomic force microscopy (AFM) was employed to investigate the morphology of Langmuir–Blodgett (LB) films after transfer to solid supports. Ion‐responsive self‐assembly was followed using light microscopy and can be understood on a molecular level by employing ¹H NMR spectroscopy. The π‐mmA isotherm of PMOX‐b‐P(MHS‐co‐DMS)‐b‐PMOX‐44Bz at the air–water interface had an extended pseudo‐plateau at a surface pressure of ca 22 mN m^?1 reflecting the coil to loop transformation of the hydrophobic middle block which was absent for the crown ether‐functionalized triblock copolymer. AFM images of LB films of PMOX‐b‐P(MHS‐co‐DMS)‐b‐PMOX‐44Bz showed dewetting effects of the polymer film after transfer to a silicon wafer. LB films of PMOX‐b‐P(MHS‐co‐DMS)‐b‐PMOX‐8Ce formed surface micelles having a size of ca 50–100 nm on the solid support. The ion sensitivities of the crown ether‐derivatized copolymers in solution were investigated by exposing polymeric vesicles to potassium, sodium and magnesium ions. Exposure to K⁺ and Na⁺ led to vesicle rupture and the formation of micro‐tubular structures, while Mg²⁺ had no effect on the vesicular structures as confirmed using light microscopy. Specific interactions between the crown ether‐derivatized polymer and ions were further elucidated from ¹H NMR experiments that indicated that K⁺ coordinated with the crown ether causing the dense packing to subside and leading to solubilization of the polymer in water. Copyright © 2010 Society of Chemical Industry     

Synthesis of Substituted 2,2′‐Bipyridines and 2,2′:6′,2′′‐Terpyridines by Cobalt‐Catalyzed Cycloaddition Reactions of Nitriles and α,ω‐Diynes with Exclusive Regioselectivity

A variety of substituted 2,2′‐bipyridines were synthesized by a 1,2‐bis(diphenylphosphino)ethane (dppe)/cobalt chloride hexahydrate (CoCl₂⋅6 H₂O)/zinc‐catalyzed [2+2+2] cycloaddition reaction of diynes and nitriles, with all reactions exhibiting exclusive regioselectivity. Thus, symmetrical and unsymmetrical 1,6‐diynes and 2‐cyanopyridine reacted in the presence of 5 mol % of dppe, 5 mol % of CoCl₂⋅6 H₂O and 10 mol % of zinc powder to provide the corresponding 2,2′‐bipyridines. Under identical reaction conditions, 1‐(2‐pyridyl)‐1,6‐diynes and nitriles reacted smoothly with exclusive regioselectivity to produce 2,2′‐bipyridines in good yield. 2,2′‐Bipyridines were also obtained by the double [2+2+2] cycloaddition reaction of 1,6,8,13‐tetraynes with nitriles. Similarly, 2,2′:6′,2′′‐terpyridines were synthesized from 1‐(2‐pyridyl)‐1,6‐diyne and 2‐cyanopyridine. The regiochemistry observed can be explained by considering the electronic nature of cobaltacyclopentadiene intermediates and nitriles. A survey of the exclusive regiochemical trend gives reasonable credence to the synthetic potential of the present method.