The Synergistic Effect of Pemirolast Potassium on Carrier Management and Strain Release for High-Performance Inverted Perovskite Solar Cells

The quality of the perovskite absorption layer is critical for the high efficiency and long-term stability of perovskite solar cells (PSCs). The inhomogeneity due to local lattice mismatch causes severe residual strain in low-quality perovskite films, which greatly limits the availability of high-performance PSCs. In this study, a multi-active-site potassium salt, pemirolast potassium (PP), is added to perovskite films to improve carrier dynamics and release residual stress. X-ray photoelectron spectroscopy (XPS) and Fourier-transform infrared spectroscopy (FTIR) measurements suggest that the proposed multifunctional additive bonds with uncoordinated Pb²⁺ through the carbonyl group/tetrazole N and passivated I atom defects. Moreover, the residual stress release is effective from the surface to the entire perovskite layer, and carrier extraction/transport is promoted in PP-modified perovskite films. As a result, a champion power conversion efficiency (PCE) of 23.06% with an ultra-high fill factor (FF) of 84.36% is achieved in the PP-modified device, which ranks among the best in formamidinium-cesium (FACs) PSCs. In addition, the PP-modified device exhibits excellent thermal stability due to the inhibited phase separation. This work provides a reliable way to improve the efficiency and stability of PSCs by releasing residual stress in perovskite films through additive engineering.     

3D Polydentate Complexing Agents for Passivating Defects and Modulating Crystallinity for High-Performance Perovskite Solar Cells

The grain boundaries (GBs)/surface defects within perovskite film directly impede the further improvement of photoelectric conversion efficiency (PCE) and stability of planar perovskite solar cells (PSCs). Herein, 3D phytic acid (PA) and phytic acid dipotassium (PAD) with polydentate are explored to synchronously passivate the defects of perovskite absorber directly in multiple spatial directions. The strong electron-donating groups ( H₂PO₄) in the PA molecule afford six anchor sites to bind firmly with uncoordinated Pb²⁺ at the GBs/surface and modulate perovskite crystallization, thus enhancing the quality of perovskite film. Particularly, PAD containing an additional (K→PO) push–pull structure promotes the dominant coordination of phosphate group (PO) with Pb²⁺ and passivates halide anion defects due to the complexation of potassium ions (K⁺) with iodide ions (I^-). Consequently, the PAD-complexed PSCs deliver a champion PCE of 23.18%, which is remarkably higher than that of the control device (19.94%). Meanwhile, PAD-complexed PSCs exhibit superior moisture and thermal stability, remaining 79% of their initial PCE after 1000 h under continuous illumination, while the control device remain only 48% of their PCE after 1000 h. This work provides important insights into designing multifunctional 3D passivators for the purpose of simultaneously enhancing the efficiency and stability of devices.     

Spidermen Strategy for Stable 24% Efficiency Perovskite Solar Cells

The interface energetics-modification plays an important role in improving the power conversion efficiency (PCE) among the perovskite solar cells (PSCs). Considering the low carrier mobility caused by defects in PSCs, a double-layer modification engineering strategy is adopted to introduce the “spiderman” NOBF₄ (nitrosonium tetrafluoroborate) between tin dioxide (SnO₂ and perovskite layers. NO⁺, as the interfacial bonding layer, can passivate the oxygen vacancy in SnO₂, while BF₄⁻ can optimize the defects in the bulk of perovskite. This conclusion is confirmed by theoretical calculation and transmission electron microscopy (TEM). The synergistic effect of NO⁺ and BF₄⁻ distinctly heightens the carrier extraction efficiency, and the PCE of PSCs is 24.04% with a fill factor (FF) of 82.98% and long-term stability. This study underlines the effectiveness of multifunctional additives in improving interface contact and enhancing PCE of PSCs.     

Co-Evaporated MAPbI3 with Graded Fermi Levels Enables Highly Performing,Scalable, and Flexible p-i-n Perovskite Solar Cells

Recent progress of vapor-deposited perovskite solar cells (PSCs) has proved the feasibility of this deposition method in achieving promising photovoltaic devices. For the first time, it is probed the versatility of the co-evaporation process in creating perovskite layers customizable for different device architectures. A gradient of composition is created within the perovskite films by tuning the background chamber pressure during the growth process. This method leads to co-evaporated MAPbI₃ film with graded Fermi levels across the thickness. Here it is proved that this growth process is beneficial for p-i-n PSCs as it can guarantee a favorable energy alignment at the charge selective interfaces. Co-evaporated p-i-n PSCs, with different hole transporting layers, consistently achieve power conversion efficiency (PCE) over 20% with a champion value of 20.6%, one of the highest reported to date. The scaled-up p-i-n PSCs, with active areas of 1 and 1.96 cm², achieved the record PCEs of 19.1% and 17.2%, respectively, while the flexible PSCs reached a PCE of 19.3%. Unencapsulated PSCs demonstrate remarkable long-term stability, retaining ≈90% of their initial PCE when stored in ambient for 1000 h. These PSCs also preserve over 80% of their initial PCE after 500 h of thermal aging at 85 °C.     

Undercoordinated Pb2+ defects passivation via tetramethoxysilane-modified for efficient and stable perovskite solar cells

Organic-inorganic hybrid perovskite solar cells (PSCs) have developed rapidly in recent years, and the instability limits its commercialization. Non-radiative recombination caused by defects and water stability affect the device stability. Here we introduce an organic silane additive, tetramethoxysilane (TMOS), which can reduce the non-radiative recombination and prevent the water erosion. The methoxy group in TMOS can combine with Pb²⁺ of perovskite to passivate undercoordinated Pb²⁺ defects and reduce non-radiative recombination. Under a certain humidity, the hydrolyzed product SiO₂ can occupy the grain boundary sites to prevent the erosion of water molecules, slow down the degradation of perovskite, and improve the crystal phase stability of perovskite. The PCE of the device increases from 17.13% to 20.12%. After 400 h at 50% relative humidity (RH), the PSC with 2% TMOS can maintain the efficiency of 90%, while the efficiency of the control group quickly dropped to only 70% of the initial.     

Efficient and Ambient‐Air‐Stable Solar Cell with Highly Oriented 2D@3D Perovskites

3D organic–inorganic lead halide perovskites have shown great potential in efficient photovoltaic devices. However, the low stability of the 3D perovskite layer and random arrangement of the perovskite crystals hinder its commercialization road. Herein, a highly oriented 2D@3D ((AVA)₂PbI₄@MAPbI₃) perovskite structure combining the advantages of both 2D and 3D perovskite is fabricated through an in situ route. The highest power conversion efficiency (PCE) of 18.0% is observed from a 2D@3D perovskite solar cell (PSC), and it also shows significantly enhanced device stability under both inert (90% of initial PCE for 32 d) and ambient conditions (72% of initial PCE for 20 d) without encapsulation. The high efficiency of 18.0% and nearly twofold improvement of device stability in ambient compared with pure 3D PSCs confirm that such 2D@3D perovskite structure is an effective strategy for high performance and increasing stability and thus will enable the timely commercialization of PSCs.     

Side-Chain Functionalized Polymer Hole-Transporting Materials with Defect Passivation Effect for Highly Efficient Inverted Quasi-2D Perovskite Solar Cells

Compared with inverted 3D perovskite solar cell (PSCs), inverted quasi-2D PSCs have advantages in device stability, but the device efficiency is still lagging behind. Constructing polymer hole-transporting materials (HTMs) with passivation functions to improve the buried interface and crystallization properties of perovskite films is one of the effective strategies to improve the performance of inverted quasi-2D PSCs. Herein, two novel side-chain functionalized polymer HTMs containing methylthio-based passivation groups are designed, named PVCz-SMeTPA and PVCz-SMeDAD, for inverted quasi-2D PSCs. Benefited from the non-conjugated flexible backbone bearing functionalized side-chain groups, the polymer HTMs exhibit excellent film-forming properties, well-matched energy levels and improved charge mobility, which facilitates the charge extraction and transport between HTM and quasi-2D perovskite layer. More importantly, by introducing methylthio units, the polymer HTMs can enhance the contact and interactions with quasi-2D perovskite, and further passivating the buried interface defects and assisting the deposition of high-quality perovskite. Due to the suppressed interfacial non-radiative recombination, the inverted quasi-2D PSCs using PVCz-SMeTPA and PVCz-SMeDAD achieve impressive power conversion efficiency (PCE) of 21.41% and 20.63% with open-circuit voltage of 1.23 and 1.22 V, respectively. Furthermore, the PVCz-SMeTPA based inverted quasi-2D PSCs also exhibits negligible hysteresis and considerably improved thermal and long-term stability.     

Solvent engineering of the electron transport layer using 1,8-diiodooctane for improving the performance of perovskite solar cells

In this work, the power conversion efficiency (PCE) of perovskite solar cells (PSCs) was improved by 14.8% (from 11.09% to 12.73%) by using 1,8-diiodooctane (DIO) as a solvent additive during the deposition of phenyl-C61-butyric acid methyl ester (PCBM) layers. The primary reasons for the PCE improvement are the simultaneous increases in the short-circuit current density, fill factor, and open-circuit voltage. The incorporation of DIO improves the morphology of the electron transport layer (PCBM), which plays an important role in charge dissociation, transportation, and collection. Our results indicate that engineering the morphology of the electron transport layer is a simple and effective method for developing high-performance PSCs.     

High efficient and stable Tin-based perovskite solar cells via short-chain ligand modification

Sn-based perovskite material has been selected as a strong contender for perovskite solar cells (PSCs) application compared with Pb-based perovskite, due to its more suitable bandgap and excellent optoelectronic characteristics. However, the poor quality of Sn-based perovskite film and the oxidation of Sn²⁺ still lead to the unsatisfactory efficiency and instability of PSCs. In our work, a type of ligand “Trifluoroethylamine iodide (3FEAI)” was developed to achieve the crystallization regulation of FASnI₃ perovskite films, which could effectively improve the film quality while restricting the film defects. Moreover, it is found that the short-chain 3FEAI exhibited the better assistance of charge transport effect compared with the conventional ligand PEAI, which further contributed to the efficiency of PSCs. At last, with the introduction of 3FEAI, the prepared device shows the considerable efficiency (9.34%) and long-term stability (~10% PCE loss after 500 h of aging).     

Tailoring Multifunctional Self-Assembled Hole Transporting Molecules for Highly Efficient and Stable Inverted Perovskite Solar Cells

The self-assembled hole transporting molecules (SAHTMs) bearing anchoring groups have been established as the hole transporting layers (HTLs) for highly efficient p–i–n perovskite solar cells (PSCs), yet their stability and engineering at the molecular level remain challenging. A topological design of highly anisotropic aligned SAHTM-based HTLs for operationally stable PSCs that exhibit exceptional solar-to-electric power conversion efficiencies (PCEs) is demonstrated. The judiciously designed multifunctional self-assembled molecules comprise the donor–acceptor subunit for hole transporting and the phosphonic acid group for anchoring, realizing face-on π-stacking parallel to the transparent conductive oxide substrate. The high affinity of SAHTMs to the multi-crystalline perovskite thin film benefits passivating the perovskite buried interface, strengthening interfacial contact while facilitating interfacial hole transfer. Consequently, highly efficient p–i–n PSC devices are obtained with a champion PCE of 23.24% and outstanding operational stability toward various environmental factors including long-term full sunlight soaking at evaluated temperatures. Perovskite solar modules with a champion efficiency approaching 20% are also fabricated for an active device area above 17 cm².     

Bonding Strength Regulates Anchoring-Based Self-Assembly Monolayers for Efficient and Stable Perovskite Solar Cells

Anchoring-based self-assembly (ASA) has emerged as a material-saving and highly scalable strategy to fabricate charge-transporting monolayers for perovskite solar cells (PSCs). However, the interfacial hole-extraction and electron-blocking performances are highly dependent on the compactness of the ASA monolayers, which has been largely ignored though it is very crucial to the efficiency and stability of PSCs. Here, strategically designed hole-transporting molecules with different anchoring groups are incorporated to investigate the effect of bonding strength on monolayer quality and correlate these with the performance of p-i-n structured PSCs. It is unraveled that the anchoring groups with a stronger bonding strength are advantageous for improving the assembly rate, density, and compactness of ASA monolayer, thus enhancing charge collection and suppressing interfacial recombination. The prototypical PSCs based on optimal ASA monolayer achieve a high power conversion efficiency (PCE) of 21.43% (0.09 cm²). More encouragingly, when enlarging the device area by tenfold, a comparable PCE of 20.09% (1.0 cm²) can be obtained, suggesting that the ASA strategy is practically useful for scaling-up. The robust anchoring of the ASA monolayer also enhances devices stability, retaining 90% of initial PCE after three months. This study provides important insights into the ASA charge-transporting monolayers for efficient and stable PSCs.     

Concurrent Top and Buried Surface Optimization for Flexible Perovskite Solar Cells with High Efficiency and Stability

Although much progress is made toward enhancing the efficiency of perovskite solar cells (PSCs), their operational reliability, particularly their mechanical stability, which is a crucial factor for flexible PSCs (f-PCSs), has not attracted sufficient attention. The defects in the perovskite layer, especially on the top and the buried surface of the perovskite layer, can induce perovskite fracture, highly limiting the performance of f-PSCs. Herein, a novel multifunctional organic salt, metformin hydrochloride, which can passivate cationic and anionic defects, is incorporated on both the top and buried surfaces of perovskite layer to suppress defects. As a result, a power conversion efficiency (PCE) of 24.40% for rigid PSCs and a PCE of 22.04% for f-PSCs are achieved. Simultaneously, the device can retain 90% and 80% of the initial efficiency after 1000 h of light illumination and 10 000 bending cycles, respectively, showing excellent operational stability. This study may provide a global way to design a passivation strategy and fabricate flexible perovskite solar cells with high efficiency and stability.     

Fused-ring electron acceptor as an efficient interfacial material for planar and flexible perovskite solar cells

Perovskite solar cell (PSC) has attracted great attention due to its high power conversion efficiency (PCE), low cost and solution processability. The well-designed interface and the modification of electron transport layer (ETL) are critical to the PCE and long-term stability of PSCs. In this article, a fused-ring electron acceptor is employed as the interfacial material between TiO₂ and the perovskite in rigid and flexible PSCs. The modification improves the surface of TiO₂, which decreases the defects of ETL surface. Moreover, the modified surface has lower hydrophilicity, and thus is beneficial to the growth of perovskite with large grain size and high quality. As a result, the interfacial charge transfer is promoted and the interfacial charge recombination can be suppressed. The highest PCE of 19.61% is achieved for the rigid PSCs after the introduction of ITIC, and the hysteresis effect is significantly reduced. Flexible PSC with ITIC obtains a PCE of 14.87%, and the device stability is greatly improved. This study provides an efficient candidate as the interfacial modifier for PSCs, which is compatible with low-temperature solution process and has a great practical potential for the commercialization of PSCs.     

Conjugated Polymer–Assisted Grain Boundary Passivation for Efficient Inverted Planar Perovskite Solar Cells

Grain boundaries in lead halide perovskite films lead to increased recombination losses and decreased device stability under illumination due to defect‐mediated ion migration. The effect of a conjugated polymer additive, poly(bithiophene imide) (PBTI), is investigated in the antisolvent treatment step in the perovskite film deposition by comprehensive characterization of perovskite film properties and the performance of inverted planar perovskite solar cells (PSCs). PBTI is found to be incorporated within grain boundaries, which results in an improvement in perovskite film crystallinity and reduced defects. The successful defect passivation by PBTI yields reduces recombination losses and consequently increases power conversion efficiency (PCE). In addition, it gives rise to improved photoluminescence stability and improved PSC stability under illumination which can be attributed to reduced ion migration. The optimal devices exhibit a PCE of 20.67% compared to 18.89% of control devices without PBTI, while they retain over 70% of the initial efficiency after 600 h under 1 sun illumination compared to 56% for the control devices.     

Porphyrinic Metal–Organic Framework Quantum Dots for Stable n–i–p Perovskite Solar Cells

As the power-conversion efficiency (PCE) of organic–inorganic lead halide perovskite solar cells (PSCs) is approaching the theoretical maximum, the most crucial issue concerns long-term ambient stability. Here, the application of PCN-224 quantum dots (QDs) is reported, a typical Zr-based porphyrinic metal–organic framework (MOF), to enhance the ambient stability of PSCs. PCN-224 QDs with abundant Lewis-base groups (e.g., CO, C−N, CN) contribute to high-quality perovskite films with enlarged grain size and reduced defect density by interaction with under-coordinated Pb²⁺. Meanwhile, PCN-224 QDs enable the well-matched energy level at the perovskite/hole transport layer (HTL) interface, thereby facilitating hole extraction and transport. More importantly, PCN-224 QDs-treated HTL can capture Li⁺ from bis(trifluoromethanesulfonyl)imide additive, leading to the reduced aggregation and less direct contact with moisture for hygroscopic Li-TFSI. Moreover, PCN-224 QDs mitigated Li⁺ ion migration into the perovskite layer, thus avoiding the formation of deleterious defects. The resultant devices yield a champion PCE of 22.51%, along with substantially improved durability, including humidity, thermal and light soaking stabilities. The findings provide a new approach toward efficient and stable PSCs by applying MOF QDs.     

Dithieno[3,2‐b:2′,3′‐d]pyrrol‐Cored Hole Transport Material Enabling Over 21% Efficiency Dopant‐Free Perovskite Solar Cells

Dopant‐free hole transport materials (HTMs) are essential for commercialization of perovskite solar cells (PSCs). However, power conversion efficiencies (PCEs) of the state‐of‐the‐art PSCs with small molecule dopant‐free HTMs are below 20%. Herein, a simple dithieno[3,2‐b:2′,3′‐d]pyrrol‐cored small molecule, DTP‐C6Th, is reported as a promising dopant‐free HTM. Compared with commonly used spiro‐OMeTAD, DTP‐C6Th exhibits a similar energy level, a better hole mobility of 4.18 × 10^?4 cm² V^?1 s^?1, and more efficient hole extraction, enabling efficient and stable PSCs with a dopant‐free HTM. With the addition of an ultrathin poly(methyl methacrylate) passivation layer and properly tuning the composition of the perovskite absorber layer, a champion PCE of 21.04% is achieved, which is the highest value for small molecule dopant‐free HTM based PSCs to date. Additionally, PSCs using the DTP‐C6Th HTM exhibit significantly improved long‐term stability compared with the conventional cells with the metal additive doped spiro‐OMeTAD HTM. Therefore, this work provides a new candidate and effective device engineering strategy for achieving high PCEs with dopant‐free HTMs.     

Printing-Induced Alignment Network Design of Polymer Matrix for Stretchable Perovskite Solar Cells with Over 20% Efficiency

Polymer matrix is felicitously applied into the active layer and transporting layer of perovskite solar cells (PSCs) to enable a stretchable function. However, the chaotic deposition of polymer chains is the main cause for the inferior photoelectric performance. When the stretchable PSCs are in a working state, the stress cannot be removed effectively due to the random polymer chain deposition. The stress accumulation will cause irreversible damage to the stretchable PSCs. Herein, the structural bionics and patterned-meniscus coating technology are combined to print the polymer chain-oriented deposition in the stretchable PSCs. Based on this approach, the conducting polymer electrode is printed with both significant mechanical stability and conductivity. More importantly, the oriented polyurethane with self-healing property can enhance the crystal quality of perovskite films and repair perovskite cracks caused by stress destruction. Thus, the corresponding stretchable PSCs achieve a stabilized power conversion efficiency (PCE) of 20.04% (1.0 cm²) and 16.47% (9 cm²) with minor efficiency discrepancy. Notably, the stretchable PSCs can maintain 86% of the primitive PCE after 1000 cycles of bending with a stretch ratio of 30%. This directional growth of polymer chain strategy provides guidance for printing prominent-performance stretchable PSCs.     

Stabilizing Bottom Side of Perovskite via Preburying Cesium Formate toward Efficient and Stable Solar Cells

The fragile bottom side of perovskite films is demonstrated to be harmful to the efficiency and stability of perovskite solar cells (PSCs) because the carrier extraction and recombination can be significantly influenced by the easily formed strain, voids, and defects on the bottom side. Nevertheless, the bottom side of perovskite films is usually overlooked because it remains a challenge to directly characterize and modify the bottom side. Herein, a facile and effective strategy is reported to stabilize the bottom side via preburying cesium formate (CsFo) into the SnO₂ electron transport layer (ETL). It is found that the synergistic effect of cesium cation (Cs⁺) and formate anion (HCOO⁻) causes strain relaxation, void elimination, and defects’ reduction, which further facilitate the charge extraction. Consequently, the champion power conversion efficiency (PCE) of formamidinium (FA)-based PSCs is increased from 23.34% to 24.50%. Meanwhile, the ultraviolet (UV), thermal, and operational stability are also enhanced. Finally, formamidinium–cesium (FACs)-based PSCs are investigated to confirm the effectiveness of this preburied CsFo strategy, and the optimal device exhibits a champion PCE of 25.03% and a remarkably high fill factor (FF) of 85.65%.     

A Polymer Defect Passivator for Efficient Hole-Conductor-Free Printable Mesoscopic Perovskite Solar Cells

Due to the low cost and excellent potential for mass production, printable mesoscopic perovskite solar cells (p-MPSCs) have drawn a lot of attention among other device structures. However, the low open-circuit voltage (V_OC) of such devices restricts their power conversion efficiency (PCE). This limitation is brought by the high defect density at perovskite grain boundaries in the mesoporous scaffold, which results in severe nonradiative recombination and is detrimental to the V_OC. To improve the perovskite crystallization process, passivate the perovskite defects, and enhance the PCE, additive engineering is an effective way. Herein, a polymeric Lewis base polysuccinimide (PSI) is added to the perovskite precursor solution as an additive. It improves the perovskite crystallinity and its carbonyl groups strongly coordinate with Pb²⁺, which can effectively passivate defects. Additionally, compared with its monomer, succinimide (SI), PSI serves as a better defect passivator because the long-chained macromolecule can be firmly anchored on those defect sites and form a stronger interaction with perovskite grains. As a result, the champion device has a PCE of 18.84%, and the V_OC rises from 973 to 1030 mV. This study offers a new strategy for fabricating efficient p-MPSCs.     

Dual Effects of Slow Recrystallization and Defects Passivation Achieve Efficient Tin-Based Perovskite Solar Cells with Good Stability Up to One Year

Tin-based perovskite solar cells (TPSCs) have become a star candidate in lead-free perovskite cells due to their excellent optoelectronic properties and low toxicity. However, there are a lot of problems such as uncontrollable crystallizationprocess, easy oxidation of Sn²⁺ and high defect density have not been completely resolved in TPSCs. Here, the thiourea (TU) and amidine thiourea (ASU) are added into the perovskite precursor to regulate the microstructure, inhibit the oxidation of Sn²⁺ and promote charge transfer. The characterization results demonstrate that the TU additive can not only improve the micrograph, crystallinity and antioxidant, but also significantly induce recrystallization and passivate trap states. Thus, the TPSCs with TU (TU-modified TPSCs) show a significantly higher power conversion efficienc (PCE) and better stability than those of the TPSCs with ASU (ASU-modified PSCs) and reference TPSCs. After stored in N₂ atmosphere for 8 months, the unencapsulated TU-modified PSCs achieve a champion PCE of 10.9% with an open-circuit voltage of 0.79 V. Furthermore, the unsealed TU-modified PSCs can maintain 115% of its initial efficiency after stored in N₂ atmosphere for one year. This is the longest lifetime of unencapsulated pure TPSCs in N₂ atmosphere.