首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 31 毫秒
1.
In this study, nanosized clay particles were introduced into wood fiber/plastic composites (WPCs) to improve their mechanical properties and flame retardancy, which are especially important in various automotive and construction applications. A high degree of exfoliation for nanoclay in the wood fiber/high density polyethylene (HDPE) composites was successfully achieved with the aid of maleated HDPE (PE‐g‐MAn), through a melt blending masterbatch process. The structures and morphologies of the composites were determined using X‐ray diffraction (XRD) and transmission electron microscopy (TEM), respectively. This article presents the effects of clay content and degree of clay dispersion on the mechanical and physical properties and flame retardancy of wood fiber/HDPE composites that contained a small amount of clay, in the range of 3–5 wt %. We concluded that achieving a higher degree of dispersion for the nanosized clay particles is critical to enhance the mechanical properties and the flame retardancy of WPCs when small amounts of clay are used. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010  相似文献   

2.
In this study, the influence of coupling agent concentration (0 and 3 wt%), wood fiber content (50, 60, 70, and 80 wt%), and size (40–60, 80–100, and 160–180 mesh) on the mechanical properties of wood/high-density-polyethylene (HDPE) composites (WPCs) was investigated. WPC samples were prepared with poplar wood-flour, HDPE, and polyethylene maleic anhydride copolymer (MAPE) as coupling agent. It was found that the tensile properties and the flexural properties of the composites were improved by the addition of 3 wt% MAPE, and the improved interfacial adhesion was well confirmed by SEM micrographs. It was also observed that the best mechanical properties of wood/HDPE composites can be reached with larger particle size in the range studied, while too-small particle size was adverse for the mechanical properties of wood/HDPE composites. Moreover, the tensile modulus, tensile strength, and flexural strength of WPCs decreased with the increase in fiber content from 50 to 80 wt%; the flexural modulus of WPCs increased with the increase in fiber content from 50 to 70 wt% and then decreased as the fiber content reached 80 wt%. The variances in property performance are helpful for the end-user to choose an appropriate coupling agent (MAPE) concentration, wood fiber content, and particle size based on performance needs and cost considerations.  相似文献   

3.
Aluminum hydroxide, magnesium hydroxide, and 1,2‐bis(pentabromophenyl) ethane were incorporated into high‐density polyethylene (HDPE) and wood flour composites, and their mechanical properties, morphology, and fire‐retardancy performance were characterized. The addition of flame retardants slightly reduced the modulus of elasticity and modulus of rupture of composites. Morphology characterization showed reduced interfacial adhesion among wood flour, HDPE, and flame retardants in the composites compared with control composites (HDPE and wood flour composites without the addition of flame retardants). The flame retardancy of composites was improved with the addition of the flame retardants, magnesium hydroxide and 1,2‐bis(pentabromophenyl) ethane, especially 1,2‐bis(pentabromophenyl) ethane, with a significant decrease in the heat release rate and total heat release. Char residue composition and morphology, analyzed by attenuated total reflectance, Fourier‐transform infrared spectroscopy, and scanning electron microscopy, showed that the char layer was formed on the composite surface with the addition of flame retardants, which promoted the fire performance of composites. The composites with 10 wt% 1,2‐bis(pentabromophenyl) ethane had good fire performance with a continuous and compact char layer on the composite surface. J. VINYL ADDIT. TECHNOL., 24:3–12, 2018. © 2015 Society of Plastics Engineers  相似文献   

4.
This article discusses the methods of interface modification of composites based on raw wood flakes and high‐density polyethylene (HDPE) and the effects of these modifications on composite properties. An HDPE matrix was modified by a reaction with maleic anhydride (MA) in a twin‐screw extruder and then compounded with wood flakes to produce wood–polyethylene composites. Wood flakes were modified by a reaction with a silane coupling agent in an aqueous medium before being compounded with HDPE to produce silane‐modified WPCs. Differential scanning calorimetry and Fourier transform infrared spectroscopy data provide evidence for the existence of a polyethylene (PE)–silane‐grafted wood structure, which acts as a compatibilizer for wood flakes and PE. The results of MA‐modified composites indicate that some maleated HDPE is reacting with wood through esterification to form a compatibilizer for wood flakes and HDPE. Significant improvements in tensile strength, ductility, and Izod impact strength were obtained. Scanning electron micrographs provide evidence for strong interactions between the wood flakes and the matrix agent. The results indicate that 1–2 wt % MA modification on HDPE and 1–3 wt % silane treatment on wood flakes provide WPCs with the optimum properties. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2505–2521, 2002  相似文献   

5.
Wood/plastic composites (WPCs) can absorb moisture in a humid environment due to the hydrophilic nature of the wood in the composites, making products susceptible to microbial growth and loss of mechanical properties. Co‐extruding a poly(vinyl chloride) (PVC)‐rich cap layer on a WPC significantly reduces the moisture uptake rate, increases the flexural strength but, most importantly, decreases the flexural modulus compared to uncapped WPCs. A two‐level factorial design was used to develop regression models evaluating the statistical effects of material compositions and a processing condition on the flexural properties of co‐extruded rigid PVC/wood flour composites with the ultimate goal of producing co‐extruded composites with better flexural properties than uncapped WPCs. Material composition variables included wood flour content in the core layer and carbon nanotube (CNT) content in the cap layer of the co‐extruded composites, with the processing temperature profile for the core layer as the only processing condition variable. Fusion tests were carried out to understand the effects of the material compositions and processing condition on the flexural properties. Regression models indicated all main effects and two powerful interaction effects (processing temperature/wood flour content and wood flour content/CNT content interactions) as statistically significant. Factors leading to a fast fusion of the PVC/wood flour composites in the core layer, i.e. low wood flour content and high processing temperature, were effective material composition and processing condition parameters for improving the flexural properties of co‐extruded composites. Reinforcing the cap layer with CNTs also produced a significant improvement in the flexural properties of the co‐extruded composites, insensitive to the core layer composition and the processing temperature condition. Copyright © 2009 Society of Chemical Industry  相似文献   

6.
超细空心微珠填充聚氯乙烯复合材料的研究   总被引:2,自引:0,他引:2  
选用三种不同粒径(2μm、3.8μm和11μm)的空心微珠制备了聚氯乙烯/空心微珠(PVC/GB)复合材料。研究了GB的粒径、表面处理剂及其用量对复合材料力学性能、介电性能和阻燃性等的影响,并与PVC/超细CaCO3复合材料的性能进行了对比。结果表明,经硅烷偶联剂处理的GB与PVC基体之间存在良好的界面粘附作用;在体积分数0~11%范围内,粒径为3.8μm的GB能同时提高PVC复合材料的力学性能、介电性能和阻燃性能,且GB改性效果明显优于超细CaCO3填充体系。该复合材料能作为轻质、高强度和阻燃的电缆护套材料使用。  相似文献   

7.
Unique explanations are given to describe changes in the mixing torque and tensile and impact properties of poly(vinyl chloride) (PVC)/wood sawdust composites affected by various types and concentrations of silane coupling agents. Concentrations of 0.5–1.0 and 1.5 wt % coupling agent are recommended for the optimization of the tensile and impact properties of the composites, respectively. Changes in the tensile and impact properties of the composites with a low sawdust content were more sensitive to the addition of silane coupling agents than those with a high sawdust content. KBM603 was suitable for improving the tensile properties, whereas KBE603 is recommended for high impact resistance of the composites. The differences in the mechanical and thermal properties of the PVC/sawdust composites were dependent on the characteristics of the functional groups in the silane coupling agents used, such as hydrophilic level, number of functional groups, self‐condensation reaction, and effectiveness of the hydrolysis reaction. Silane coupling agents above 1.0 wt % resulted in an increase in polyene sequences in the PVC structure. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 213–221, 2005  相似文献   

8.
The effect of zinc borate (ZnB), borophosphate (BPO4), and organoclay were studied to improve the flame retardancy of polyamide‐6 composites containing organic phosphinates. The flame retardancy of polyamide‐6 composites was investigated using limiting oxygen index (LOI), Underwriters Laboratories (UL‐94) standard, thermogravimetric analysis, Fourier transform infrared spectroscopy, and mass loss calorimeter. The addition of 15 wt% aluminum phosphinate (AlPi) increased the LOI value from 22.5 to 29.5, and V0 rating was obtained from UL‐94 test. The addition of organoclay, ZnB, and borophosphate does not change the predominant gas phase mechanism of AlPi during LOI and UL‐94 tests. The addition of organoclay increased the condensed phase mechanism of AlPi physically by the protective effect of layered silicate, whereas the addition of ZnB increased the condensed phase mechanism of AlPi chemically by the formation of boron aluminum phosphate species deducted from mass loss calorimeter studies. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

9.
Wood‐plastic composites (WPCs) can absorb moisture in a humid environment owing to the hydrophilic nature of the wood, thereby making the products susceptible to microbial growth and loss of mechanical properties. In this study, rigid poly(vinyl chloride) (PVC)/wood‐flour composites (core layer) were coextruded with either unfilled rigid PVC (cap layer) or rigid PVC filled with a small amount (5–27.5%) of wood flour (composite cap layers) in order to decrease or delay the moisture uptake. The thickness of the cap layer and its composition in terms of wood flour content were the variables examined during coextrusion. Surface color, moisture absorption, and flexural properties of both coextruded and noncoextruded (control) composite samples were characterized. The experimental results indicated that both unfilled PVC and composite cap layers can be encapsulated over rigid PVC/wood‐flour composites in a coextrusion process. The moisture uptake rate was lower when a cap layer was applied in the composites, and the extent of the decrease was a strong function of the amount of wood flour in the cap layer but insensitive to cap layer thickness. Overall, coextruding PVC surface‐rich cap layers on WPCs significantly increased the flexural strength but decreased the flexural modulus as compared with those of control samples. The changes in bending properties were sensitive to both cap layer thickness and wood flour content. J. VINYL ADDIT. TECHNOL., 2008. © 2008 Society of Plastics Engineers  相似文献   

10.
The main purpose of this work was to study the formaldehyde emission from wood plastic composites (WPCs) containing polyvinyl chloride (PVC), wood flour, and sanding dust of medium density fiberboard (MDF). Wood floor was replaced with 10, 15, and 20% MDF sanding dust (as a wood‐based panel waste), and the composites were manufactured by the extrusion method. Formaldehyde emission from WPCs was measured using two different methods: the desiccator method according to ISO 12460 and the flask method according to EN717‐3. Moreover, the physical and mechanical properties of the WPC samples were determined. The results indicated that the use of MDF sanding dust in formulation of WPCs leads to higher formaldehyde emission. The composites with higher content of MDF sanding dust exhibited higher formaldehyde emission. Although the PVC composites containing MDF sanding dust release formaldehyde, the formaldehyde emission values were very low. Therefore, these composites can be considered to be green composites and there is no concern in their indoor applications. J. VINYL ADDIT. TECHNOL., 25:159–164, 2019. © 2018 Society of Plastics Engineers  相似文献   

11.
In this article, flame retardancy thermoplastic composites were developed by extrusion followed by injection molding using recycled Tetra Pak packaging material (TPP) waste and high‐density polyethylene (HDPE) with addition of ammonium polyphosphate (APP) and melamine (MEL) as intumescent flame retardants (FRs). The influences of intumescent FRs on the properties of composites were investigated. FRs loading positively affected flame retardancy, but deteriorated mechanical properties as the loading rate was more than 30 wt%. Considering the fire retardancy and tensile strength (TS), the content of FR should not be more than 30 wt%. When the ratio of APP/MEL was less than 3/1, both combustion behavior and TS of the composites were improved with the increased FR loading, which was supported and verified by the analysis of FTIR spectra and SEM images. The thermogravimetric analysis results indicated that the incorporation APP and/or APP and MEL into composites as FRs into composites promoted char formation and correspondingly improved the thermal stability. The synergistic effect of APP and MEL in the intumescent FR system further improved the flame retardancy of the composites. POLYM. COMPOS., 37:1797–1804, 2016. © 2014 Society of Plastics Engineers  相似文献   

12.
Mechanical, thermal, and morphological properties of injection molded wood‐plastic composites (WPCs) prepared from poplar wood flour (50 wt%), thermoplastics (high density polyethlyne or polypropylene) with coupling agent (3 wt%), and hexagonal boron nitride (h‐BN) (2, 4, or 6 wt%) nanopowder were investigated. The flexural and tensile properties of WPCs significantly improved with increasing content of the h‐BN. Unlike the tensile and flexural properties, the notched izod impact strength of WPCs decreased with increasing content of h‐BN but it was higher than that of WPCs without the h‐BN. The WPCs containing h‐BN were stiffer than those without h‐BN. The tensile elongation at break values of WPCs increased with the addition of h‐BN. The differential scanning calorimetry (DSC) analysis showed that the crystallinity, melting enthalpy, and crystallization enthalpy of the WPCs increased with increasing content of the h‐BN. The increase in the crystallization peak temperature of WPCs indicated that h‐BN was the efficient nucleating agent for the thermoplastic composites to increase the crystallization rate. POLYM. COMPOS., 35:194–200, 2014. © 2013 Society of Plastics Engineers  相似文献   

13.
Effective interfacial adhesion between wood fibers and plastics is crucial for both the processing and ultimate performance of wood–plastic composites. Coupling agents are added to wood–plastic composites to promote adhesion between the hydrophilic wood surface and hydrophobic polymer matrix, but to date no coupling agent has been reported for PVC/wood‐fiber composites that significantly improved their performance and was also cost‐effective. This article presents the results of a study using chitin and chitosan, two natural polymers, as novel coupling agents for PVC/wood‐flour composites. Addition of chitin and chitosan coupling agents to PVC/wood‐flour composites increased their flexural strength by ~20%, their flexural modulus by ~16%, and their storage modulus by ~33–74% compared to PVC/wood‐flour composite without the coupling agent. Significant improvement in composite performance was attained with 0.5 wt% of chitosan and when 6.67 wt% of chitin was used. J. VINYL ADDIT. TECHNOL., 11:160–165, 2005. © 2005 Society of Plastics Engineers  相似文献   

14.
对蒙脱土进行有机改性制得有机蒙脱土(OMMT),并制备了聚氯乙烯侑机蒙脱土/木粉(PVC/OMMT/WF)纳米复合材料。采用硅烷偶联剂对木粉表面进行改性,有效提高了聚氯乙烯/木粉(PVC/WF)复合材料的力学性能,其中加入1.5%(质量含量,下同)硅烷偶联剂可使复合材料的冲击强度和拉伸强度分别提高14.8%和18.5%。研究了OMMT的加入对木粉改性前后的PVC/WF复合材料力学性能、耐热性能及阻燃性能的影响,结果表明,木粉未经改性时,OMMT加入无助于PVC/OMMT/WF复合材料力学性能的提高;木粉用硅烷偶联剂改性后,添加少量的OMMT,可使PVC/OMMT/WF复合材料的冲击强度和拉伸强度明显提高。研究表明,添加OMMT可显著延迟复合材料的点燃时间,燃烧残余率也明显增加,OMMT是PVC/WF复合材料的高效阻燃剂。  相似文献   

15.
分别采用A1(OH)3、ZB以及Sb2O3等无机阻燃剂对PVC/木粉复合材料改性,研究不同的阻燃剂配方及阻燃剂含量对PVC/木粉复合材料阻燃性能和力学性能的影响。结果表明:随着A1(OH)3,ZB以及Sb2O3添加量的增加,PVC/木粉复合材料的氧指数(LOI)呈逐渐增大的趋势。Sb2O3阻燃效率最高,当添加量为9份时,氧指数达到35.2%;无机阻燃剂的加入普遍降低了PVC/木粉复合材料的冲击韧性,但对拉伸强度起到了一定的增强作用。  相似文献   

16.
《Polymer Composites》2017,38(12):2898-2906
Carbide slag, an industrial waste produced by calcium carbide hydrolysis to prepare C2H2 gas, was successfully used as inorganic filler in the production of polyvinyl chloride (PVC)‐wood composites. carbide slag had an average diameter of 8.1 μm which thermally decomposed at about 450°C, and its main component was Ca(OH)2. Incorporating carbide slag into PVC‐wood composites substantially decreased the flexural, tensile, and impact strength of the composites as a result of the poor interfacial adhesion between carbide slag and PVC matrix, which could be evidently observed from the scanning electron microscopy (SEM) study. To give carbide slag better use, silane coupling agent KH570 were chose to modify carbide slag. The results indicated that adding carbide slag modified by KH570 (MCS) into PVC‐wood composites could significantly improve its notched impact strength and flexural modulus. The thermogravimetric analysis (TGA) data showed that with the addition of MCS, composite had better thermal stability. It also turned out that with the addition of MCS, its smoke suppression property and flammability were enhanced effectively. To ensure sufficient properties of PVC‐wood composites, the optimal adding content of MCS was 20 phr and it leaded to remarkable performance (its flexural modulus was 3.4 GPa, notched impact strength was 3.87 KJ/m2, limiting oxygen index value was 41.5% and smoke density ranting was 55.1%), all of which endowed PVC‐wood composites better utilization. All the results indicated that the preparation of PVC‐wood composites with carbide slag could resolve environmental pollution, reuse carbide slag in different fields, and provide a new method for resource utilization of carbide slag. POLYM. COMPOS., 38:2898–2906, 2017. © 2015 Society of Plastics Engineers  相似文献   

17.
Full exfoliation of clay/high density polyethylene (HDPE) nanocomposites was successfully achieved with the aid of maleated HDPE (PE‐g‐MAn), by melt blending in a twin‐screw extruder employing a long residence time configuration. The morphology of the composites was determined using wide‐angle X‐ray diffraction and transmission electron microscopy. The effects of clay content and state of clay dispersion on the rheological, tensile properties, and flame retardancy of nanocomposites containing very small amounts of clay, in the range of 0.05–1.0 wt %, were investigated in this study. It was demonstrated that achieving a higher degree of exfoliation for nanosized clay particles is key to enhancing the rheological, mechanical, and flame retarding properties even when small amounts of clay (less than 1%) are used. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007  相似文献   

18.
Expandable graphite (EG) and ammonium polyphosphate (APP) were used to improve the flame retardancy of acrylonitrile–butadiene–styrene based wood–plastic composites (WPCs). A synergistic effect between EG and APP on the flame retardancy of the WPCs was proposed. The results show that the highest limited oxygen index (LOI) of 34.2% and a V‐0 rating were achieved when the ratio of EG to APP 12.5:7.5; this comprised 20 wt % of the total amount. However, LOI values of the samples with EG and APP alone were only 30.5 and 24.5%, respectively. Thermogravimetric analysis indicated that the flame retardants improved the amount of residue. The EG and EG/APP additives greatly decreased the peak heat release rate and suppressed smoke according to cone calorimetry testing. The scanning electron microscopy analysis indicated that the surface of the wormlike char was covered with a granular substance, which may have been the viscous phosphoric acid or poly(phosphoric acid) decomposed from APP. The flame‐retardant additives worsened the mechanical properties of the WPCs. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40281.  相似文献   

19.
A phosphorus-nitrogen flame retardant (PN) was synthesized by using cytosine and diphenylphosphinic chloride. The flame retardancy and thermal stability of polylactic acid (PLA)/PN composites were investigated by the UL-94 vertical burning test, limited oxygen index (LOI), cone calorimeter test, and thermogravimetric analysis. The PN performs efficiently on improving the flame retardancy of PLA. The PLA composite achieves the UL-94 V-0 rating and its LOI increases to 30.4 vol% by adding 0.5 wt% PN. The flame retardant mechanism analysis showed that PN catalyzes the degradation of PLA to improve the flame retardancy by melting-away mode. Meanwhile PN reduces the release of flammable gasses during thermal degradation of PLA by promoting the transesterification of PLA, which is helpful for extinguishing flame. Moreover, triglycidyl isocyanurate (TGIC) was used as a micro-crosslinking agent to reduce the loss of mechanical properties of PLA/PN composites caused by degradation. Adding 0.1 wt% TGIC and 1.0 wt% PN into PLA, the tensile strength and elongation at break of PLA/PN are increased to the same level as that of PLA. Therefore, PLA with excellent comprehensive performance can be obtained.  相似文献   

20.
The use of untreated sawdust as a filler in poly(vinyl chloride) (PVC) was examined—the effects of sawdust content on structural and thermal changes, and rheological and mechanical properties being of main interest. The results revealed that the torque and die entrance pressure drop values during mixing were independent of sawdust particles up to 23.1 wt%. The extrudate swell monotonically decreased up to 33.3 wt% sawdust content. Smooth wood‐like texture with controllable size of the extrudate could be obtained at a sawdust content greater than 33.3 wt%. Tensile, impact, flexural and hardness properties of the PVC/sawdust composites considerably decreased with up to 16.7 wt% sawdust content before leveling off for higher sawdust loadings. The composites having sawdust higher than 16.7 wt% showed a benefit of cost savings. The decreases in the mechanical properties of PVC with sawdust are explained in association with the presence of moisture, interfacial defects between fibre and polymer, and fibre dispersions in the PVC matrix. Thermal degradations of PVC in PVC/sawdust composites were evidenced by a decrease in decomposition temperature and an increase in polyene sequences, which were caused by Cl cleavage due to strong hydrogen bonds of fibre–PVC molecules. The maximum of tanδ transition and the glass transition temperature were found to improve with sawdust content as a result of re‐formation of hydrogen bonds between the macromolecules of the fibre and the polymer. The overall results in this work suggest that the properties of PVC/sawdust composites were strongly influenced by sawdust content up to 16.7 wt%. Beyond this value the effect of sawdust content on the properties was comparatively small. Copyright © 2003 Society of Chemical Industry  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号