Benefits of a high‐performance phosphite in the gamma irradiation of polyolefins

The highly active process stabilizer bis(2,4‐dicumylphenyl)pentaerythritol diphosphite (P1) was compared in a series of polyolefin formulations with tris(2,4‐di‐t‐butylphenyl) phosphite (P2). Because of its high activity, there was less polymer degradation during processing with P1 as compared to P2. As a result, improvements in color and other physical properties were observed for the polymers, not only during processing, but also after treatment with gamma radiation.     

Micellar Effects in Olefin Hydroformylation Catalysed by Neutral,Calix[4]arene‐Diphosphite Rhodium Complexes

The combination of calixarene‐derived surfactants and neutral rhodium complexes containing a hemispherical “1,3‐calix‐diphosphite” ligand led to efficient catalysts for the hydroformylation of octene and other olefins in water. While the surfactants allowed the formation of micelles that dissolve both the catalyst and the alkene, thereby resulting in high olefin:rhodium ratios, the diphosphite provided a tight envelope about the catalytic centre able to drive the reaction towards the linear aldehydes. Best results in the hydroformylation of 1‐octene were obtained when using [tetra(p‐sulfonato)]‐(tetra‐n‐butoxy)‐calix[4]arene as surfactant. With this additive remarkable linear to branched aldehyde ratios of up to 62 were obtained, the corresponding activities being higher than those observed when operating in an organic solvent [turnover frequencies (TOFs) up to 630 mol(converted 1‐octene)⋅ mol(Rh)⁻¹⋅h⁻¹].     

Synthesis of biphenylated cyanate esters: Thermomechanical resin comparisons within two isomeric series

Three isomeric tetraaryl cyanate esters containing biphenyl moieties {bis‐[4‐(4′‐cyanatophenyl)phenyl]propane, 2,2‐bis‐[4‐(3′‐cyanatophenyl)phenyl]propane, and 2,2‐bis‐[4‐(2′‐cyanatophenyl)phenyl]propane} and three isomeric triaryl cyanate esters {2‐(4′‐hydroxyphenyl)‐2‐[4′‐(4‐hydroxyphenyl)phenyl]propane, 2‐(4′‐hydroxyphenyl)‐2‐[4′‐(3‐hydroxyphenyl)phenyl]propane, and 2‐(4′‐hydroxyphenyl)‐2‐[4′‐(2‐hydroxyphenyl)phenyl]propane} were synthesized from their corresponding bisphenols. The structures of the monomers were confirmed with IR and ¹H‐NMR spectroscopy. The curing behavior was investigated with differential scanning calorimetry. Cyanate esters were cured thermally in the absence of a catalyst and were characterized by dynamic mechanical analysis. The results were compared to the properties of commercial bisphenol A polycyanurate. Of the three tetraaryl isomers, 2,2‐bis‐[4‐(2′‐cyanatophenyl)phenyl]propane had the highest melting point, and its corresponding resin had the lowest glass‐transition temperature (T_g). The para isomer displayed the highest T_g value of the three novel tetraaryl resins. The triaryl dicyanate isomers were low‐melting solids, with the ortho and meta isomers existing as liquids at room temperature. The T_g value of the para‐triaryl isomer was the highest of the three triaryl isomers and was about the same as that of bisphenol A polycyanurate. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis and spectroelectrochemical investigation of low‐bandgap polymer: Integrated quinoxaline and benzimidazole in one electron acceptor unit

Two novel π‐conjugated monomers, 6‐(4‐octyloxyphenyl)‐4,8‐bis(thiophene‐2‐yl)‐3H‐[d] imidazole[1,2,5] benzothiadiazole (M3) and 4‐(4‐octyloxyphenyl)‐2,6‐bis(thiophene‐2‐yl)‐3H‐[d] imidazole‐acenaphtho[1,2‐b]quinoxaline (M4), were synthesized. The monomer M4 contains a thiophene electron‐donating unit and electron withdrawing unit in which quinoxaline and benzimidazole integrated in one benzene ring. Electrochemical polymerization of the monomers was carried out in acetonitrile/dichloromethane solvent mixture containing tetra‐n‐butylammonium hexafluorophosphate and electrochromic properties of polymers (P3 and P4) are described in this article. Furthermore, the effects of structural difference on electrochemical redox behavior and spectroelectrochemical properties of the two resulting polymers were examined. The results showed that an anodic wave at +0.48 V versus Ag wire pseudo‐reference electrode corresponding to the monomer M4 oxidation was observed, while one anodic wave at +0.70 V was observed in oxidation of M3 as it contains stronger electron withdrawing thiadiazole structure. The UV‐vis‐Near‐infrared (Near‐infrared spectroscopy) (NIR) spectra analysis revealed that the two polymers have one absorbance band centered at 603 nm. The band gaps, defined as the onset of the absorption band at 603 nm of these polymers, were determined as 1.60 eV for P3 and as 1.55 eV for P4. The electrochromic results showed that P3 revealed about 20% optical contrast at 980 nm and the P4 has 30% optical contrast at 806 nm with low response time (1 s for each polymer). © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40861.     

Direct Enantioselective Three‐Component Kabachnik–Fields Reaction Catalyzed by Chiral Bis(imidazoline)‐Zinc(II) Catalysts

A direct three‐component reaction of aldehydes, amines and diaryl phosphites was catalyzed by a zinc(II) complex of 1,3‐bis(imidazolin‐2‐ly)pyridine (pybim) giving the corresponding α‐aminophosphonates in good yield with good enantioselectivity. The reaction was applied to a wide variety of aromatic aldehydes to give products with excellent yields (up to 99%) and enantiomeric excesses (up to 93% ee).     

Crosslinking of 1,9‐bis[glycidyloxypropyl]penta‐ (1′H,1′H,2′H,2′H‐perfluoroalkylmethylsiloxane)s with α,ω‐diaminoalkanes: The cure behavior and film properties

A series of nine films were prepared via phenol‐catalyzed thermal crosslinking reactions of 1,9‐bis‐ [glycidyloxypropyl]pentasiloxanes {1,9‐bis[glycidyloxypro‐ pyl]decamethylpentasiloxane (I), 1,9‐bis[glycidyloxypropyl]‐3,5,7‐tris(3′,3′,3′‐trifluoropropyl)heptamethylpentasiloxane (II), and 1,9‐bis[glycidyloxypropyl]‐3,5,7‐tris(1′H,1′H,2′H, 2′H‐perfluorooctyl)heptamethylpentasiloxane (III)} with α,ω‐diaminoalkanes [1,6‐diaminohexane (a), 1,8‐diaminooctane (b), and 1,12‐diaminododecane (c)]. The crosslink density was controlled by the choice of a–c. The cure behavior of I–III with a–c was studied with differential scanning calorimetry. The mechanical properties of the films were determined by dynamic mechanical thermal analysis. Their thermal stability was analyzed by thermogravimetric analysis. The surface properties of the films were evaluated with static contact‐angle measurements. These films represented a novel class of epoxies with an unusual combination of properties: high flexibility (low glass‐transition temperature), good thermal stability, and hydrophobic surfaces. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 203–210, 2004     

Fluorinated polybenzimidazopyrrolones with excellent alkaline‐hydrolysis resistance

Two novel aromatic tetraamines containing bulky lateral phenyl unit and multiple trifluoromethyl groups, 1,1‐bis[4‐(3′,4′‐diaminophenoxy)phenyl]‐1‐(3″‐trifluoromethylphenyl)?2,2,2‐trifluoroethane (6FTA) and 1,1‐bis[4‐(3′,4′‐diaminophenoxy)phenyl]‐1‐[3″,5″‐bis(trifluoromethyl)phenyl]‐2,2,2‐trifluoroethane (9FTA) were synthesized and characterized. A series of fluorinated aromatic polybenzimidazopyrrolones (polypyrrolones, PPys) were synthesized via a two‐step polycondensation procedure. The inherent viscosities of the precursors, poly(amide amino acid) (PAAA), ranged from 0.39 dL/g to 0.54 dL/g. All the FPPys were amorphous. The freestanding FPPy films could be prepared, which exhibited good thermal stability with the glass transition temperature of 315–389°C, the temperatures of 5% weight loss (T_5%) of 497–535°C in nitrogen and residual weight retention at 700°C over 60%. All the FPPy films exhibited excellent alkaline‐hydrolysis resistance which retained their original shapes and toughness after boiling 7 days in 10% sodium hydroxide solution. Also after boiling 8 h in 10% sodium hydroxide solution, the tensile strength could retain as high as 56% of the original values. The alkaline‐hydrolysis resistance was much better than the polyimides which had similar chemical structures. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2014 , 131, 40041.     

Gold(I)‐Catalyzed Tandem Alkoxylation/Lactonization of γ‐Hydroxy‐α,β‐Acetylenic Esters

The formation of 4‐alkoxy‐2(5H)‐furanones was achieved via tandem alkoxylation/lactonization of γ‐hydroxy‐α,β‐acetylenic esters catalyzed by 2 mol% of [2,6‐bis(diisopropylphenyl)imidazol‐2‐ylidine]gold bis(trifluoromethanesulfonyl)imidate [Au(IPr)(NTf₂)]. The economic and simple procedure was applied to a series of various secondary propargylic alcohols allowing for yields of desired product of up to 95%. In addition, tertiary propargylic alcohols bearing mostly cyclic substituents were converted into the corresponding spiro derivatives. Both primary and secondary alcohols reacted with propargylic alcohols at moderate temperatures (65–80 °C) in either neat reactions or using 1,2‐dichloroethane as a reaction medium allowing for yields of 23–95%. In contrast to [Au(IPr)(NTf₂)], reactions with cationic complexes such as [2,6‐bis(diisopropylphenyl)imidazol‐2‐ylidine](acetonitrile)gold tetrafluoroborate [Au(IPr)(CH₃CN)][BF₄] or (μ‐hydroxy)bis{[2,6‐bis(diisopropylphenyl)imidazol‐2‐ylidine]gold} tetrafluoroborate or bis(trifluoromethanesulfonyl)imidate – [{Au(IPr)}₂(μ‐OH)][X] (X=BF₄, NTf₂) – mostly stop after the alkoxylation. Analysis of the intermediate proved the exclusive formation of the E‐isomer which allows for the subsequent lactonization.     

Design of Ionic Phosphites for Catalytic Hydrocyanation Reaction of 3‐Pentenenitrile in Ionic Liquids†

The synthesis and characterization of a novel class of ionic phosphites bearing either a single cationic group obtained by quaternization of aminophosphites or three cationic groups prepared by reaction of phosphorus trichloride with imidazolium phenols are reported. The catalytic hydrocyanation reaction of 3‐pentenenitrile (3PN) into adiponitrile has been performed in the presence of Ni(0) with ionic phosphite ligands, and a Lewis acid in biphasic ionic liquid/organic solvent system. The screening of several original cationic phosphites was performed and the experimental conditions were optimized for the tri‐cationic phosphite tris‐4‐[(2,3‐dimethylimidazol‐1‐yl)methyl]phenyl phosphite tris[bis(trifluoromethylsulfonyl)amide]. It is possible to obtain performance similar to molecular systems and the catalyst and the Lewis acid were immobilized in the ionic phase.     

The preparation of α‐bis and α,ω‐tetrakis aromatic oxazolyl‐ and carboxyl‐functionalized polymers using 1,1‐bis[4‐(2‐(4,4‐dimethyl‐1,3‐oxazolyl))phenyl]ethylene in atom transfer radical polymerization reactions

The preparation of new compounds, 1,1‐bis[4‐(2‐(4,4‐dimethyl‐1,3‐oxazolyl))phenyl]ethanol and a new symmetrically disubstituted 1,1‐diphenylethylene derivative, 1,1‐bis[4‐(2‐(4,4‐dimethyl‐1,3‐oxazolyl))phenyl]ethylene, is described. 1,1‐Bis[4‐(2‐(4,4‐dimethyl‐1,3‐oxazolyl))phenyl]ethylene was utilized as a dioxazolyl initiator precursor for the polymerization of styrene by atom transfer radical polymerization (ATRP) methods to produce α‐bis(oxazolyl) polystyrene. The kinetic study of the polymerization process indicated that the free radical polymerization reaction for the preparation of α‐bis(oxazolyl) polystyrene follows first‐order rate kinetics with respect to monomer consumption. α,ω‐Tetrakis(oxazolyl) polystyrene was prepared by a new, in situ, controlled/living, post‐ATRP chain‐end‐functionalization reaction which involves the direct addition of 1,1‐bis[4‐(2‐(4,4‐dimethyl‐1,3‐oxazolyl))phenyl]ethylene to the ω‐terminus of the α‐bis(oxazolyl) polystyrene derivative, without the isolation and purification of the polymeric precursor. α‐Bis(carboxyl) and α,ω‐tetrakis(carboxyl) polystyrene derivatives were obtained by the quantitative chemical transformation of the oxazoline groups of the respective aromatic oxazolyl chain‐end‐functionalized polystyrene derivatives to the aromatic carboxyl groups. The organic precursor compounds, the dioxazolyl‐functionalized 1,1‐diphenylethylene derivative and the functionalized polymers were characterized using ¹H NMR and ¹³C NMR spectrometry and Fourier transform infrared spectroscopy, size‐exclusion and thin‐layer chromatography and non‐aqueous titration measurements. © 2014 Society of Chemical Industry     

Determination of the miscibility of phosphorus additives in polymer matrices by high resolution solid state NMR

Summary The measurement of high resolution solid state NMR proton T_1p values (relaxation time in the rotating frame) provides a method for the study of the compatibility of phosphorus additives with polymer matrices. Results are compared for two commercial phosphorus stabilizers, bis (2,4 di-t-butylphenyl) pentaerythritol diphosphite (Phosphite 1) and tris (2,4 di-t-butylphenyl) phosphite (Phosphite 2), in 5% masterbatches in linear low density polyethylene (LLDPE). Phosphite 1 shows compatibility even when poorly mixed while the Phosphite 2 shows separation into two domains with different relaxation rates and different chemical shifts in the solid state.     

Recyclable Copper Catalysts Based on Imidazolium‐Tagged Bis(oxazolines): A Marked Enhancement in Rate and Enantioselectivity for Diels–Alder Reactions in Ionic Liquid

Imidazolium‐tagged bis(oxazolines) have been prepared and used as chiral ligands in the copper(II )‐catalysed Diels–Alder reaction of N‐acryloyl‐ and N‐crotonoyloxazolidinones with cyclopentadiene and 1,3‐cyclohexadiene in the ionic liquid 1‐ethyl‐3‐methylimidazolium bis[(trifluoromethyl)sulfonyl]imide, [emim][NTf₂]. A significant and substantial enhancement in the rate and enantioselectivity was achieved in [emim][NTf₂] compared with dichloromethane. For example, complete conversion and enantioselectivities up to 95 % were obtained for the reaction between N‐acryloyloxazolidinone and cyclopentadiene within 2 min in [emim][NTf₂] whereas the corresponding reaction in dichloromethane required 60 min to reach completion and gave an ee of only 16 %. The enhanced rates obtained in the ionic liquid enabled a catalyst loading as low as 0.5 mol % to give complete conversion within 2 min while retaining the same level of enantioselectivity. The imidazolium‐tagged catalysts can be recycled ten times without any loss in activity or enantioselectivity and showed much higher affinity for the ionic liquid phase during the recycle procedure than the analogous uncharged ligand.     

Synthesis,characterization, and application of oligomer‐type‐based phosphites

Organic alkyl and aryl phosphites are effective antioxidants and photostabilizers with applications in a wide range of polymers. The primary role of phosphites is to decompose hydroperoxide. However, aryl phosphites are also capable of reacting as antioxidants by affecting the kinetics. In particular, oligomer‐type phosphites have a greater effect on polymer degradation because of their high compatibility, reactivity, and solubility with almost all polymers. Generally, phosphites are sensitive to hydrolysis. In order to overcome this hydrolytic sensitivity in phosphites, a novel hydrolytically stable oligomeric phosphite incorporating a sterically hindered aromatic alcohol (2,4‐di‐tert‐butyl‐6‐methylphenol) that gives hydrolytic stability to the phosphite was synthesized and characterized, and its performance as an antioxidant for polypropylene was investigated. J. VINYL ADDIT. TECHNOL., 22:146–155, 2016. © 2014 Society of Plastics Engineers     

Poly(ether imide)s containing cyano substituents and thin films made from them

A series of poly(ether imide)s containing functional cyano groups has been prepared by polycondensation reaction of 2,6‐bis(m‐aminophenoxy)benzonitrile with different bis(ether dianhydride)s, such as 2,2‐bis[4‐(3,4‐dicarboxyphenoxy)phenyl]isopropane dianhydride, 2,2‐bis[4‐(3,4‐dicarboxyphenoxy)‐phenyl]hexafluoroisopropane dianhydride, 1,1‐bis[4‐(3,4‐dicarboxyphenoxy)phenyl]cyclohexane dianhydride, and 3,3‐bis[4‐(3,4‐dicarboxyphenoxy) phenyl]phthalide dianhydride. The polymers were soluble in polar aprotic solvents and even in less polar solvents and were processed into thin films by casting their solutions. The properties of the polymers, particularly the crosslinking of macromolecular chains through cyano groups, were studied by using dynamic mechanical analysis (DMA), thermal stability, glass transition, and solubility measurements. Also, the molecular relaxations were evidenced by DMA and dielectric spectroscopy. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis and characterization of organosoluble and transparent polyimides derived from trans‐1,2‐bis(3,4‐dicarboxyphenoxy)cyclohexane dianhydride

A novel dianhydride, trans‐1,2‐bis(3,4‐dicarboxyphenoxy)cyclohexane dianhydride (1,2‐CHDPA), was prepared through aromatic nucleophilic substitution reaction of 4‐nitrophthalonitrile with trans‐cyclohexane‐1,2‐diol followed by hydrolysis and dehydration. A series of polyimides (PIs) were synthesized from one‐step polycondensation of 1,2‐CHDPA with several aromatic diamines, such as 2,2′‐bis(trifluoromethyl)biphenyl‐4,4′‐diamine (TFDB), bis(4‐amino‐2‐trifluoromethylphenyl)ether (TFODA), 4,4′‐diaminodiphenyl ether (ODA), 1,4‐bis(4‐aminophenoxy)benzene (TPEQ), 4,4′‐(1,3‐phenylenedioxy)dianiline (TPER), 2,2′‐bis[4‐(3‐aminodiphenoxy)phenyl]sulfone (m‐BAPS), and 2,2′‐bis[4‐(4‐amino‐2‐trifluoromethylphenoxy)phenyl]sulfone (6F‐BAPS). The glass transition temperatures (T_gs) of the polymers were higher than 198°C, and the 5% weight loss temperatures (T_d5%s) were in the range of 424–445°C in nitrogen and 415–430°C in air, respectively. All the PIs were endowed with high solubility in common organic solvents and could be cast into tough and flexible films, which exhibited good mechanical properties with tensile strengths of 76–105 MPa, elongations at break of 4.7–7.6%, and tensile moduli of 1.9–2.6 GPa. In particular, the PI films showed excellent optical transparency in the visible region with the cut‐off wavelengths of 369–375 nm owing to the introduction of trans‐1,2‐cyclohexane moiety into the main chain. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42317.     

Synthesis and spectroelectrochemistry of dithieno(3,2‐b:2′,3′‐d)pyrrole derivatives

New π‐conjugated polymers containing dithieno(3,2‐b:2′,3′‐d)pyrrole (DTP) were successfully synthesized via electropolymerization. The effect of structural differences on the electrochemical and optoelectronic properties of the 4‐[4H‐dithieno(3,2‐b:2′,3′‐d)pyrrol‐4‐yl]aniline (DTP–aryl–NH₂), 10‐[4H‐dithiyeno(3,2‐b:2′,3′‐d)pirol‐4‐il]dekan‐1‐amine (DTP–alkyl–NH₂), and 1,10‐bis[4H‐dithieno(3,2‐b:2′,3′‐d)pyrrol‐4‐yl] decane (DTP–alkyl–DTP) were investigated. The corresponding polymers were characterized by cyclic voltammetry, NMR (¹H‐NMR and ¹³C‐NMR), and ultraviolet–visible spectroscopy. Changes in the electronic nature of the functional groups led to variations in the electrochemical properties of the π‐conjugated systems. The electroactive polymer films revealed redox couples and exhibited electrochromic behavior. The replacement of the DTP–alkyl–DTP unit with DTP–aryl–NH₂ and DTP–alkyl–NH₂ resulted in a lower oxidation potential. Both the poly(10‐(4H‐Dithiyeno[3,2‐b:2′,3′‐d]pirol‐4‐il)dekan‐1‐amin) (poly(DTP–alkyl–NH₂)) and poly(1,10‐bis(4H‐dithieno[3,2‐b:2′,3′‐d]pyrrol‐4‐yl) decane) (poly(DTP–alkyl–DTP)) films showed multicolor electrochromism and also fast switching times (<1 s) in the visible and near infrared regions. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40701.     

Synthesis,characterization, in vitro degradation and cytotoxicity of polyphosphazenes containing N‐ethoxypyrrolidone side groups

A new biodegradable polyphosphazene (PYRMP) containing N‐ethoxypyrrolidone and methoxyethoxyethoxy side groups was synthesized via a route of macromolecular substitution. The synthetic method of poly{bis[2‐(2‐oxo‐1‐pyrrolidinyl)ethoxy]phosphazene} (PYRP) was improved. The thermal properties of the polymers were investigated using differential scanning calorimetry. Degradation studies were carried out in vitro with varying pH conditions. The in vitro cytotoxicity of PYRMP and its hydrolysis products was evaluated using the methyl tetrazolium (MTT) cytotoxicity test in HepG2 cell culture. PYRMP and PYRP have low glass transition temperatures of ?68.8 and ?59.6 °C, respectively. The polymers show a higher degradation rate at pH = 5.0 than at both pH = 7.4 and 8.0. The degradation process of PYRMP in different buffer solutions is discussed. The MTT test reveals that PYRMP at concentrations below 800 µg mL^?1 and its hydrolysis products are non‐toxic to HepG2 cells. Moreover, the hydrolysis products diluted 10 times are able to promote cell proliferation. This study shows that polyphosphazene containing N‐ethoxypyrrolidone subsituents provides interesting perspectives for various biomedical applications. Copyright © 2009 Society of Chemical Industry     

Direct (hetero)arylation polymerization for the synthesis of donor–acceptor conjugated polymers based on N‐benzoyldithieno [3,2‐b:2′,3′‐d]pyrrole and diketopyrrolopyrrole toward organic photovoltaic cell application

In this research, new donor–acceptor (D‐A) photovoltaic polymers were synthesized from dithieno[3,2‐b:2′,3′‐d]pyrrole electron donor derivatives, including N‐benzoyldithieno[3,2‐b:2′,3′‐d]pyrrole and N‐(4‐hexylbenzoyl)dithieno[3,2‐b:2′,3′‐d]pyrrole, in combination with the electron deficient unit 2,5‐bis(2‐ethylhexyl)‐3,6‐di(thiophen‐2‐yl)‐2,5‐dihydropyrrolo[3,4‐c]pyrrole‐1,4‐dione via direct (hetero)arylation polymerization. The D‐A conjugated polymers obtained were characterized via ¹H NMR, gel permeation chromatography, Fourier transform infrared spectroscopy, DSC, XRD, photoluminescence and UV–visible methods. In addition, these D‐A polymers were used as activated layers in bilayer and bulk heterojunction structures for the fabrication of organic photovoltaic cells. © 2019 Society of Chemical Industry     

Synthesis,characterization, and application of a hydrolytically stable liquid phosphite

Organic alkyl and aryl phosphites are effective antioxidants and photostabilizers with applications in a wide range of polymers. The primary role of phosphites is to decompose hydroperoxide. However, aryl phosphites are also capable of reacting as antioxidants by negatively affecting the kinetics. In particular, liquid phosphites have a greater effect on polymer degradation because of their high compatibility, reactivity, and solubility with almost all polymers, but they are sensitive to hydrolysis. In order to overcome this hydrolytic sensitivity in liquid phosphites, a novel hydrolytically stable liquid phosphite incorporating a sterically hindered aromatic alcohol (2,4‐di‐tert‐butyl‐6‐methylphenol) that gives hydrolytic stability to the phosphite was synthesized and characterized, and its performance as an antioxidant for polypropylene was investigated. J. VINYL ADDIT. TECHNOL., 22:163–168, 2016. © 2014 Society of Plastics Engineers     

Heterogeneous Catalytic Sulfimidation using Immobilized Cu(acac)2

The heterogeneous sulfimidation of various sulfides by microencapsulated copper(II) acetylacetonate, [MC‐Cu(acac)₂], and Cu(acac)₂ immobilized in ionic liquids using [N‐(p‐tolylsulfonyl)imino]phenyliodinane (PhINTs) as nitrene donor has been developed to afford the corresponding sulfimides in good to excellent yields. In the presence of a chiral bis(oxazoline) as ligand, asymmetric induction occurs to afford the chiral sulfimides (up to 50% ee). The ionic liquid containing the immobilized bis(oxazoline)‐copper catalyst can be reused for several cycles with consistent activity and enantioselectivity.