Formation of micron‐sized cycloolefin copolymer from toluene solution using compressed HFC‐134a as antisolvent

A precipitation process employing 1,1,1,2‐tetrafluoroethane (HFC‐134a) as antisolvent was studied to see its feasibility for the separation of cycloolefin copolymer (COC) from toluene solution. The precipitation was carried out by spraying toluene solution containing 3 to 12 wt % of COC through a 0.4‐mm nozzle into a compressed HFC‐134a environment. More than 95% of COC could be precipitated under the conditions that both gas and liquid HFC‐134a phases were present in the precipitator. The effects of temperature, pressure, COC concentration, HFC‐134a flow rate, toluene solution flow rate, and liquid level in the precipitator on yield and morphology of the precipitated COC were systematically studied. Microspheres of COC with a narrow size distribution were exhibited for the COC concentration equal to or less than 5 wt %. The precipitation at these COC concentrations followed a nucleation and growth mechanism. Nucleation and solution breakup that affected morphology and size of the precipitated COC were allowed to occur in the gas space above the liquid. For the concentrations of 8, 10, and 12 wt %, fibers and films instead of microspheres were exhibited. The porosity of the precipitated COC was found to decrease with increasing the COC concentration, indicating that the precipitation was under a spinodal decomposition mechanism. The molecular weight and glass‐transition temperature of the precipitated COC were found to be sufficiently close to those of the virgin chips, indicating that HFC‐134a is an appropriate antisolvent to achieve separation of polymer from solution. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1657–1668, 2002; DOI 10.1002/app.10543     

Liquid‐type nucleating agent for improving thermal insulating properties of rigid polyurethane foams by HFC‐365mfc as a blowing agent

The effects of liquid‐type additives on the morphology, thermal conductivity, and mechanical strength of polyurethane (PUR) foams were investigated. The PUR foams synthesized with perfluoroalkane showed a smaller average cell diameter and a lower thermal conductivity than PUR foams prepared with propylenecarbonate or acetone. The average cell diameter of the PUR foams decreased from 228 to 155 μm and the thermal conductivity decreased from 0.0227 to 0.0196 kcal/mh °C when the perfluoroalkane content was 0.0 to 2.0 php (parts per hundred polyol by weight). The perfluoroalkane likely acted as a nucleating agent during the formation of the PUR foams. The addition of perfluoroalkane induced the smaller cells size of the PUR foams probably due to lower surface tension of the polyol and perfluoroalkane mixture, resulting in high nucleation rate. The smaller cell size appears to be the main reason for the improvement in the thermal insulating and the mechanical properties of these PUR foams. The compressive strength of the PUR foams prepared with perfluoroalkane was higher than the PUR foams prepared with the propylenecarbonate and acetone. Based on the morphology, thermal conductivity, and compressive strength, it is suggested that the perfluoroalkane is an efficient liquid‐type additive for the improving the thermal insulation of PUR foams. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43557.     

Aspects of foaming a glass‐reinforced polypropylene with chemical blowing agents

This work explores the influence of a chemical blowing agent on different aspects of producing a short glass‐fiber‐reinforced polypropylene foam, examining the rheology of the system, the developed morphology of the part, and the resulting mechanical properties. Two different forms of an endothermic blowing agent, namely powder versus masterbatch, were compared to determine their effects on the process history and properties of an injection molded part. Samples were produced on an injection molding machine between 230 and 270°C using the low‐pressure foaming technique. Rheology of the resulting plasticized melt by the two different blowing agents was measured on an in‐line rheometer, showing a greater reduction in shear viscosity for the masterbatch additive, which correspondingly reduced the extent of fiber breakage observed. The final molded samples were analyzed for their foam structure (i.e., cell size, cell density, and skin thickness) as well as the properties of the glass fibers incorporated (namely, fiber length distribution). Tensile properties were found to diminish with increasing blowing agent content, though differences were observed based on the type of CBA used despite the similarities in foam structure produced. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4696–4706, 2006     

Synthesis of poly(β‐pinene)‐g‐polystyrene from allylic brominated poly(β‐pinene)

Poly(β‐pinene) was brominated by N‐bromosuccinimide on the allylic carbons. Then the brominated product was activated by AlEt₂Cl to initiate the polymerization of styrene to give a β‐pinene/styrene graft copolymer. AlEt₂Cl was selected because it alone could not initiate the polymerization of styrene. The obtained graft copolymer was characterized by GPC, ¹H‐NMR, and DSC measurements, respectively. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 75: 599–603, 2000     

Thermal,mechanical, and morphological characterization studies of poly(2,6‐dimethyl‐1,4‐phenylene oxide) blends with polystyrene and brominated polystyrene

The miscibility of the binary and ternary blends of poly(2,6‐dimethyl‐1,4‐phenylene oxide), brominated polystyrene, and polystyrene was investigated using a differential scanning calorimeter. The morphology of these blends was characterized by scanning electron microscopy. These studies revealed a close relation between the blend structure and its mechanical properties. The compatibilizing effect of poly(2,6‐dimethyl‐1,4‐phenylene oxide) on the miscibility of the polystyrene/brominated polystyrene blends was examined. It was found that poly(2,6‐dimethyl‐1,4‐phenylene oxide), which was miscible with polystyrene and partially miscible with brominated polystyrene, compatibilizes these two immiscible polymers if its contention exceeds 33 wt %. Upon the addition of poly(2,6‐dimethyl‐1,4‐phenylene oxide) to the immiscible blends of polystyrene/brominated polystyrene, we observed a change in the morphology of the mixtures. An improvement in the mechanical properties was noticed. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 75: 225–231, 2000     

Solubility and phase separation of poly(L,D‐lactide) copolymers

In this study, the solubility and precipitation properties of medical‐grade stereocopolymers were investigated. The solubility of the polymers was tested with eight different organic solvents and four nonsolvents. The solubility of poly(L,D ‐lactide) stereocopolymers was highly dependent on the L /D ratio of the copolymer. The phase‐separation ability was tested by cloud‐point titration with a solvent and a nonsolvent. The solvent was in all cases dichloromethane, and the nonsolvents were n‐hexane, methanol, ethanol, and isopropyl alcohol. The results showed that n‐hexane was the most efficient nonsolvent. Methanol and ethanol showed quite similar precipitation properties. Isopropyl alcohol was the least efficient nonsolvent of those studied. Also, the L /D ratio of the copolymer had an effect on the precipitation properties. The precipitation happened most easily when the L content was high. The molecular weight of the copolymer had only a slight effect on the phase separation. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

R134a和R142b在表面多孔螺旋扁管外的沸腾传热

The objective of this work was to investigate nucleate pool boiling heat transfer performance and mechanism of R134a and R142b on a twisted tube with machine processed porous surface （T-MPPS tube） as well as to determine its potential application to flooded refrigerant evaporators. In the experimental range, the boiling heat transfer coefficients of R134a on a T-MPPS tube were 1.8-2.0 times larger than those of R134a on a plain tube. In addition, the developed experimental correlations verified that the predictions of the heat transfer coefficients of boiling R134a and R142bon a T-MPPS tube at the experimental conditions were considerably accurate.     

Generation of polymer ultrafine fibers through solution (air‐) blowing

Solution (air‐) blowing, an innovative technique for generation of ultrafine polymer fibers from solutions, was developed by feeding polymer solutions (instead of melts) to a die assembly similar to that used in the conventional melt (air‐) blowing process. Micro‐ to nano‐scaled polyvinylpyrrolidone (PVP) fibers were produced using PVP solutions with water, ethanol, and/or their mixtures as the solvents; and the morphologies of the fibers were examined by scanning electron microscopy. The processing variables, including PVP concentration, air‐blowing pressure, solution‐feeding pressure, and the volatility of the solvent system (the ratio of ethanol to water), were systematically investigated. The results indicated that solution (air‐) blowing was a viable technique to produce nonwoven fabrics consisting of ultrafine polymer fibers with diameters ranging from micrometers to nanometers. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Global phase behavior of imidazolium ionic liquids and compressed 1,1,1,2‐tetrafluoroethane (R‐134a)

Novel processes involving ionic liquids with refrigerant gases have recently been developed. Here, the complete global phase behavior has been measured for the refrigerant gas, 1,1,1,2‐tetrafluoroethane (R‐134a) and 1‐n‐alkyl‐3‐methyl‐imidazolium ionic liquids with the anions hexafluorophosphate [PF₆], tetrafluoroborate [BF₄] and bis(trifluoromethylsulfonyl)imide [Tf₂N] from ～0°C to 105°C and to 33 MPa. All of the systems studied were Type V from the classification scheme of Scott‐van Konynenburg with regions of vapor‐liquid equilibrium, miscible/critical regions, vapor‐liquid‐liquid equilibrium, and upper and lower critical endpoints (UCEP and LCEP). The effect of the alkyl chain length has been investigated, for ethyl‐([EMIm]), n‐butyl‐([BMIm]), and n‐hexyl‐([HMIm]). With increasing chain length, the temperature of the lower critical end points increases and pressure at the mixture critical points decrease. With a common cation, the temperature of the LCEP increased and the mixture critical point pressures decreased in the order of [BF₄], [PF₆], and [Tf₂N]. © 2008 American Institute of Chemical Engineers AIChE J, 2009     

Compatibilization of poly(vinyl chloride) and polystyrene blends with poly(styrene‐co‐n‐methylolacrylamide)

In this work, the compatibilization of blends of plasticized polyvinyl chloride (PVC) and polystyrene (PS) with poly(styrene‐co‐n‐methylolacrylamide) (PSnMA) was investigated. The PSnMA was synthesized by emulsion polymerization with different amounts of n‐methylolacrylamide (nMA). Particle size and phase behavior was determined by scanning electron microscopy, and mechanical properties were determined in an Universal Testing Machine. Micrographs revealed that an appreciable size reduction of the dispersed phase was achieved when small amounts of PSnMA were added to the blend, and as the amount of nMA was increased, particle size decreased. When the (PVC/PS/PSnMA) blend was subjected to solvent extraction to remove PS and unreacted PVC, the residue showed a single T_g. Tensile modulus and the ultimate strength of the blends increased with PSnMA content. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis,properties, and self‐assembly of poly(benzyl ether)‐b‐polystyrene dendritic–linear polymers

Poly(benzyl ether)‐b‐polystyrene dendritic–linear polymers were successfully synthesized using a dendritic chloric poly(benzyl ether) (G₁‐Cl, G₂‐Cl, and G₃‐Cl) as the macroinitiator through the atom transfer radical polymerization process. The structure and properties of the resultant polymers were characterizated by gel permeation chromatography, ¹H‐NMR, Fourier transform IR, thermogravimetric analysis, and differential scanning calorimetry. It was found that the temperature, reaction time, molar ratio of the macroinitiator to styrene, and the generation number of the macroinitiator have significant effects on the molecular weights, conversion, and polydispersities of the resulting polymers. These dendritic–linear block polymers had very good solubility in common organic solvents at room temperature. The terminal group (dendritic segments) of the polymers can affect their thermal stability. These dendritic–linear polymers after self‐assembling in selective solvents (chloroform/acetone) formed core–shell micelles. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1106–1112, 2005     

Self‐assembled structures in polystyrene‐block‐polyisoprene‐blend‐polystyrene and polystyrene‐block‐poly(methyl methacrylate)‐blend‐polystyrene or ‐blend‐poly(methyl methacrylate) in the strong segregation regime

This study deals with the investigation of microphase‐separated morphology and phase behaviour in blends of polystyrene‐block‐polyisoprene with homopolystyrene and blends of polystyrene‐block‐poly(methyl methacrylate) with homopoly(methyl methacrylate) or homopolystyrene in the strong segregation regime using small‐angle X‐ray scattering and transmission electron microscopy as a function of composition, molecular weight of homopolymers, r_M and temperature. Parameter r_M = M_H/M_C (where M_H is the molecular weight of homopolymer and M_C that of the corresponding block copolymer) was selected to encompass behaviour of the chains denoted as a ‘wet brush’ (i.e. r_M < 1). The relative domain spacing D/D_o increases in the regime 0 < r_M?1 with increasing concentration of homopolymer w_P and increasing r_M but depends on the specific implemented morphology. We tested a new approximate D/D_o versus w_P relation in the strong segregation regime using block copolymers of high molecular weights. It is shown that the parameters r_M and χ^3/2N determine the slope of the D/D_o versus w_P relation in the strong segregation regime and the new approximation generally matches the experimental data better than the approximations used so far. Copyright © 2010 Society of Chemical Industry     

Optical properties of particle‐filled polycarbonate,polystyrene, and poly(methyl methacrylate) composites

Transparency is a key material property of polycarbonate (PC), polystyrene (PS), and poly(methyl methacrylate) (PMMA). To study the optical properties of particle‐filled PC, PS, and PMMA, composites containing inorganic particles in different sizes and concentrations were produced by direct melt mixing in this work. The optical properties characterized by total light transmittance, haze, and clarity were studied. The results show that the optical properties of polymer composites are strongly affected by particle content, particle size, and especially by difference in refractive indices between polymer matrix and particles. It is also revealed that the light transmittance and haze of composites are mainly affected by difference in refractive indices, whereas the clarity is more affected by particle size. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Crystallization,melting behavior,and wettability of poly(ε‐caprolactone) and poly(ε‐caprolactone)/ poly(N‐vinylpyrrolidone) blends

Both wettability and crystallizability control poly(ε‐caprolactone)'s (PCL) further applications as biomaterial. The wettability is an important property that is governed by both chemical composition and surface structure. In this study, we prepared the PCL/poly(N‐vinylpyrrolidone) (PVP) blends via successive in situ polymerization steps aiming for improving the wettability and decreasing crystallizability of PCL. The isothermal crystallization of PCL/PVP at different PVP concentrations was carried out. The equilibrium melting point (T), crystallization rate, and the melting behavior after isothermal crystallization were investigated using differential scanning calorimetry (DSC). The Avrami equation was used to fit the isothermal crystallization. The DSC results showed that PVP had restraining effect on the crystallizability of PCL, and the crystallization rate of PCL decreased clearly with the increase of PVP content in the blends. The X‐ray diffraction analysis (WAXD) results agreed with that. Water absorptivity and contact angle tests showed that the hydrophilic properties were improved with the increasing content of PVP in blends. The coefficient for the water diffusion into PCL/PVP blends showed to be non‐Fickian in character. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Copper(I)‐Catalyzed Stereoselective Synthesis of (E)‐α‐Alkynyl‐α,β‐unsaturated Esters from a Terminal Alkyne,Diazoesters and Aldehydes

A new synthetic method for α‐alkynyl‐α,β‐unsaturated esters is presented herein. The method is based on a copper(I)‐catalyzed three‐component reaction of a terminal alkyne, diazoesters and aldehydes. The reaction is featured by mild conditions, high yields and excellent stereoselectivity. Cu(I) carbene migratory insertion is proposed as the key step in the transformation.

     

Solubility of polystyrene with various molecular weights in subcritical 1,1,1,2‐tetrafluoroethane: experiment and modified model

The solubility of polystyrene with molecular weight of 100 000 and 260 000 g mol^?1 was measured at temperatures from 313 to 333 K and at pressures from 5.0 to 13.0 MPa in subcritical 1,1,1,2‐tetrafluoroethane (R134a). The effects of pressure, temperature and molecular weight on the solubility of polystyrene were investigated. Meanwhile, the solubility of polystyrene was correlated using six density‐based semi‐empirical models (Chrastil, A‐L, K‐J, S‐S, M‐S‐T and Bartle). The M‐S‐T model was used to verify the self‐consistency of the experimental data, and the enthalpy values of polystyrene, including ΔH_total, ΔH_sub and ΔH_sol, were estimated through the Chrastil and Bartle models. In addition, a modified M‐S‐T model was proposed through a detailed study of semi‐empirical model formulas and verified by the solubility of polystyrene in subcritical R134a and 38 other solid solutes in supercritical carbon dioxide and subcritical R134a. © 2018 Society of Chemical Industry     

Measurement,Correlation and Thermodynamics of Solubility of 2,6‐Diamino‐3,5‐Dinitropyrazine‐1‐Oxide (LLM‐105) in Eight Solvents

The solubility of insensitive explosive 2,6‐diamino‐3,5‐dinitropyrazine‐1‐oxide (LLM‐105) in dimethyl sulphoxide (DMSO), N,N‐dimethylformamide (DMF), N‐methyl‐2‐pyrrolidone (NMP), N,N‐diethylformamide (DEF), 1,4‐dioxane, 1,4‐butyrolactone, ethyl acetate and 1‐butyl‐3‐methylimidazolium trifluoromethanesulfonate ([Bmim]CF₃SO₃), were measured by a polythermal method in the temperature range of 293.15 K to 375.15 K at the atmospheric pressure. The solubility of LLM‐105 decreased in the order of DMSO, NMP, DMF, DEF, 1,4‐butyrolactone, [Bmim]CF₃SO₃, 1,4‐dioxane, ethyl acetate. With higher temperature, the solubility of LLM‐105 increased in all solvents. The solubility data was correlated against temperature with the modified Apelblat equation and Ideal solution model. In addition, the dissolution enthalpy, entropy, and mole Gibbs free energy of LLM‐105 in each solvent were also calculated from the experimental solubility data by using van′t Hoff equation with the temperature dependence. The results show that the dissolution process of LLM‐105 in these solvents is endothermic and the mechanism is the entropy‐driving. DMSO is suggested as the appropriate solvent for the cooling crystallization or drowning‐out crystallization of LLM‐105.     

Structural investigations of poly(ethylene terephthalate)‐graft‐polystyrene copolymer films

Structural investigations of poly(ethylene terephthalate)‐graft‐polystyrene (PET‐g‐PS) films prepared by radiation‐induced grafting of styrene onto commercial poly(ethylene terephthalate) (PET) films were carried out by FTIR, X‐ray diffraction (XRD), and differential scanning calorimetry (DSC). The variation in the degree of crystallinity and the thermal characteristics of PET films was correlated with the amount of polystyrene grafted therein (i.e., the degree of grafting). The heat of melting was found to be a function of PET crystalline fraction in the grafted films. The grafting is found to take place by incorporation of amorphous polystyrene grafts in the entire noncrystalline (amorphous) region of the PET films and at the surface of the crystallites. This results in a decrease in the degree of crystallinity with the increase in the degree of grafting, attributed to the dilution of PET crystalline structure with the amorphous polystyrene, without almost any disruption in the inherent crystallinity. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1949–1955, 2002; DOI 10.1002/app.10515     

Synthesis and properties of polystyrene‐b‐poly(ethylene oxide)‐b‐polystyrene triblock copolymers

A series of well‐defined and property‐controlled polystyrene (PS)‐b‐poly(ethylene oxide) (PEO)‐b‐polystyrene (PS) triblock copolymers were synthesized by atom‐transfer radical polymerization, using 2‐bromo‐propionate‐end‐group PEO 2000 as macroinitiatators. The structure of triblock copolymers was confirmed by ¹H‐NMR and GPC. The relationship between some properties and molecular weight of copolymers was studied. It was found that glass‐transition temperature (T_g) of copolymers gradually rose and crystallinity of copolymers regularly dropped when molecular weight of copolymers increased. The copolymers showed to be amphiphilic. Stable emulsions could form in water layer of copolymer–toluene–water system and the emulsifying abilities of copolymers slightly decreased when molecular weight of copolymers increased. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 727–730, 2006     

Poly(N‐hydroxyethyl acrylamide)‐b‐polystyrene by combination of ATRP and aminolysis processes

Block copolymers of very hydrophilic poly(N‐hydroxyethyl acrylamide) (PHEAA) with polystyrene (PS) were successfully synthesized by sequential atom transfer radical polymerization of ethyl acrylate (EA) and styrene monomers and subsequent aminolysis of the acrylic block with ethanolamine. Quantitative aminolysis of poly(ethyl acrylate) (PEA) block yielded poly(N‐hydroxyethyl acrylamide)‐b‐polystyrene in well‐defined structures, as evidenced by Fourier transform infrared spectroscopy (FTIR) and ¹H‐NMR spectroscopy techniques. Three copolymers with constant chain length of PHEAA (degree of polymerization: 80) and PS blocks with 21, 74, and 121 repeating units were prepared by this method. Among those, the block copolymer with 21 styrene repeating units showed excellent micellation behavior in water without phase inversion below 100°C, as inferred from dynamical light scattering, environmental scanning electron microscopy, and fluorescence measurements. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013