Cumulative damage model based on equivalent fatigue under multiaxial thermomechanical random loading

A new creep–fatigue damage cumulative model is proposed under multiaxial thermomechanical random loading, in which the damage at high temperature can be divided into the pure fatigue damage and the equivalent fatigue damage from creep. During the damage accumulation process, the elementary percentage of the equivalent fatigue damage increment is proportional to that of the creep damage increment, and the creep damage is converted to the equivalent fatigue damage. Moreover, combined with a multiaxial cyclic counting method, a life prediction method is developed based on the proposed creep–fatigue damage cumulative model. In the developed life prediction method, the effects of nonproportional hardening on the fatigue and creep damages are considered, and the influence of mean stress on damage is also taken into account. The thermomechanical fatigue experimental data for thin‐walled tubular specimen of superalloy GH4169 under multiaxial constant amplitude and variable amplitude loadings were used to verify the proposed model. The results showed that the proposed method can obtain satisfactory life prediction results.     

Low‐cycle fatigue life prediction of various metallic materials under multiaxial loading

This paper proposed a simple life prediction model for assessing fatigue lives of metallic materials subjected to multiaxial low‐cycle fatigue (LCF) loading. This proposed model consists of the maximum shear strain range, the normal strain range and the maximum normal stress on the maximum shear strain range plane. Additional cyclic hardening developed during non‐proportional loading is included in the normal stress and strain terms. A computer‐based procedure for multiaxial fatigue life prediction incorporating critical plane damage parameters is presented as well. The accuracy and reliability of the proposed model are systematically checked by using about 300 test data through testing nine kinds of material under both zero and non‐zero mean stress multiaxial loading paths.     

Multiaxial fatigue life prediction method based on path‐dependent cycle counting under tension/torsion random loading

A path‐dependent cycle counting method is proposed by applying the distance formula between two points on the tension‐shear equivalent strain plane for the identified half‐cycles first. The Shang–Wang multiaxial fatigue damage model for an identified half‐cycle and Miner's linear accumulation damage rule are used to calculate cumulative fatigue damage. Therefore, a multiaxial fatigue life prediction procedure is presented to predict conveniently fatigue life under a given tension and torsion random loading time history. The proposed method is evaluated by experimental data from tests on cylindrical thin‐walled tubes specimens of En15R steel subjected to combined tension/torsion random loading, and the prediction results of the proposed method are compared with those of the Wang–Brown method. The results showed that both methods provided satisfactory prediction.     

Biaxial fatigue for proportional and non‐proportional loading paths

In order to study the use of a local approach to predict crack‐initiation life on notches in mechanical components under multiaxial fatigue conditions, the study of the local cyclic elasto‐plastic behaviour and the selection of an appropriate multiaxial fatigue model are essential steps in fatigue‐life prediction. The evolution of stress–strain fields from the initial state to the stabilized state depends on the material type, loading amplitude and loading paths. A series of biaxial tension–compression tests with static or cyclic torsion were carried out on a biaxial servo‐hydraulic testing machine. Specimens were made of an alloy steel 42CrMo4 quenched and tempered. The shear stress relaxations of the cyclic tension–compression with a steady torsion angle were observed for various loading levels. Finite element analyses were used to simulate the cyclic behaviour and good agreement was found. Based on the local stabilized cyclic elastic–plastic stress–strain responses, the strain‐based multiaxial fatigue damage parameters were applied and correlated with the experimentally obtained lives. As a comparison, a stress‐invariant‐based approach with the minimum circumscribed ellipse (MCE) approach for evaluating the effective shear stress amplitude was also applied for fatigue life prediction. The comparison showed that both the equivalent strain range and the stress‐invariant parameter with non‐proportional factors correlated well with the experimental results obtained in this study.     

Numerical analysis of low cycle fatigue for welded joints considering welding residual stress and plastic damage under combined bending and local compressive loads

The numerical analysis of low cycle fatigue of HTS‐A steel welded joints under combined bending and local compressive loads are implemented using the damage mechanics approach. First, a finite element numerical simulation of the welding process is employed to extract the welding residual stresses, which are then imported as initial stresses in the subsequent fatigue analysis. Second, a multiaxial fatigue damage model including damage coupled elasto‐plastic constitutive equations and plastic damage evolution formulation is applied to evaluate the mechanical degradation of the material under biaxial fatigue loads. Further, the fatigue lives of the HTS‐A steel welded joints are computed and compared with the experimental results from literature. A series of predicted load‐life curves clearly illustrates the variation of fatigue lives along with the combined loadings. Finally, the effects of local compression on accumulated plastic strain and fatigue damage are studied in detail. It is revealed that the local compression induces a damage competition between two critical zones.     

Online multiaxial fatigue damage evaluation method by real‐time cycle counting and energy‐based critical plane criterion

To realize online multiaxial fatigue damage assessment for the mechanical components in service, an online multiaxial cycle counting method is proposed coupled with the segment processing technique and Wang‐Brow's relative equivalent strain concept. Meanwhile, considering all the stress and strain components, which contribute to the fatigue damage on the critical plane, a multiaxial fatigue damage model without any weight coefficients is also proposed in an equivalent form of shear strain energy. Then, an online fatigue damage evaluation method for multiaxial random loading is developed by combining with the proposed damage model and online cycle counting method. The experimental results showed that the proposed online cycle counting method can be successfully applied to the calculation of multiaxial fatigue damage under random loading. Moreover, the proposed online multiaxial fatigue damage evaluation method can provide satisfactory predictions.     

Multiaxial notch fatigue life prediction based on pseudo stress correction and finite element analysis under variable amplitude loading

A new computational methodology is proposed for fatigue life prediction of notched components subjected to variable amplitude multiaxial loading. In the proposed methodology, an estimation method of non‐proportionality factor (F) proposed by authors in the case of constant amplitude multiaxial loading is extended and applied to variable amplitude multiaxial loading by using Wang‐Brown's reversal counting approach. The pseudo stress correction method integrated with linear elastic finite element analysis is utilized to calculate the local elastic‐plastic stress and strain responses at the notch root. For whole local strain history, the plane with weight‐averaged maximum shear strain range is defined as the critical plane in this study. Based on the defined critical plane, a multiaxial fatigue damage model combined with Miner's linear cumulative damage law is used to predict fatigue life. The experimentally obtained fatigue data for 7050‐T7451 aluminium alloy notched shaft specimens under constant and variable amplitude multiaxial loadings are used to verify the proposed methodology and equivalent strain‐based methodology. The results show that the proposed methodology is superior to equivalent strain‐based methodology.     

Low‐cycle fatigue of 316L stainless steel under proportional and nonproportional loadings

This paper discusses low‐cycle fatigue characteristics of 316L stainless steel under proportional and nonproportional loadings. Tension–torsion multiaxial low‐cycle fatigue tests were performed using five strain paths. Additional hardening was observed under nonproportional loadings and was more significant in tests with larger nonproportionality. Mises equivalent strain, Smith–Watson–Topper, Fatemi–Socie, Kandil–Brown–Miller and nonproportional strain parameters were applied to the experimental data to evaluate the multiaxial low‐cycle fatigue damage. The applicability of the damage laws to practical design was discussed.     

Proportional/nonproportional constant/variable amplitude multiaxial notch fatigue: cyclic plasticity,non‐zero mean stresses,and critical distance/plane

This paper deals with the formulation and experimental validation of a novel fatigue lifetime estimation technique suitable for assessing the extent of damage in notched metallic materials subjected to in‐service proportional/nonproportional constant/variable amplitude multiaxial load histories. The methodology being formulated makes use of the Modified Manson‐Coffin Curve Method, the Shear Strain–Maximum Variance Method, and the elasto‐plastic Theory of Critical Distances, with the latter theory being applied in the form of the Point Method. The accuracy and reliability of our novel fatigue lifetime estimation technique were checked against a large number of experimental results we generated by testing, under proportional/nonproportional constant/variable amplitude axial‐torsional loading, V‐notched cylindrical specimens made of unalloyed medium‐carbon steel En8 (080M40). Specific experimental trials were run to investigate also the effect of non‐zero mean stresses as well as of different frequencies between the axial and torsional stress/strain components. This systematic validation exercise allowed us to demonstrate that our novel multiaxial fatigue assessment methodology is remarkably accurate, with the estimates falling within an error factor of 2. By modelling the cyclic elasto‐plastic behaviour of metals explicitly, the design methodology being formulated and validated in the present paper offers a complete solution to the problem of estimating multiaxial fatigue lifetime of notched metallic materials, with this holding true independently of sharpness of the stress/strain raiser and complexity of the load history.     

Time‐dependent multiaxial fatigue and life prediction for nickel‐based GH4169 alloy

The fatigue behaviour of nickel‐based GH4169 alloy was studied under multiaxial loading at 650 °C. During the middle and late stages of the fatigue life at 650 °C, the axial and shear maximum stresses continue to decrease and plastic strains continue to increase, while at 360 °C different phenomena are observed. The intergranular cracks and certain quantities oxygen were observed in the fracture surfaces. The damage of creep and oxidation are related to temperature and strain range. The life prediction results with a time‐dependent fatigue damage model show the time‐related factors have a certain influence on the fatigue damage.     

Life prediction based on weight‐averaged maximum shear strain range plane under multiaxial variable amplitude loading

Based on Wang and Brown's reversal counting method, a new approach to the determination of the critical plane is proposed by the defined plane with a weight‐averaged maximum shear strain range under multiaxial variable amplitude loading. According to the determined critical plane, a detailed procedure of multiaxial fatigue life prediction is introduced to predict lives in the low‐cycle multiaxial fatigue regime. The proposed approach is verified by two multiaxial fatigue damage models and Miner's linear cumulative damage law. The results showed that the proposed approach can effectively predict the orientation of the failure plane under multiaxial variable amplitude loading and give a satisfactory life prediction.     

Multiaxial notch fatigue life prediction based on the dominated loading control mode under variable amplitude loading

A new calculation approach is suggested to the fatigue life evaluation of notched specimens under multiaxial variable amplitude loading. Within this suggested approach, if the computed uniaxial fatigue damage by the pure torsional loading path is larger than that by the axial tension–compression loading path, a shear strain‐based multiaxial fatigue damage parameter is assigned to calculate multiaxial fatigue damage; otherwise, an axial strain‐based multiaxial fatigue damage parameter is assigned to calculate multiaxial fatigue damage. Furthermore, the presented method employs shear strain‐based and axial strain‐based multiaxial fatigue damage parameters in substitution of equivalent strain amplitude to consider the influence of nonproportional additional hardening. The experimental data of GH4169 superalloy and 7050‐T7451 aluminium alloy notched components are used to illustrate the presented multiaxial fatigue lifetime estimation approach for notched components, and the results reveal that estimations are accurate.     

Comparative study of multiaxial fatigue damage models for ductile structural steels and brittle materials

Fatigue damage prediction under a general multiaxial service loading consists of three main steps: multiaxial cycle counting, damage evaluation for an identified cycle (or reversal), and damage accumulations. The accuracy of fatigue life predictions depends on all the above steps. This paper reviews the evolutions of various multiaxial fatigue damage models, a comparative study is conducted about the physical basis, the computational efficiency, and the application range of the approaches. Based on the comparative studies, a new procedure is proposed to evaluate fatigue damage under general multiaxial random loading, which uses the Wang and Brown´s multiaxial cycle counting method for identifying cycles (or reversals), the modified procedure of the minimum circumscribed ellipse (MCE) approach for fatigue damage evaluation for an identified cycle (or reversal), and the Miner´s linear damage law for fatigue damage accumulations. By comparisons of the predicted life results with experimental results and with other approaches, it is shown that the proposed procedure is very efficient and suitable for computer aided structural optimization against fatigue.     

Monotonic and Cyclic Deformations of Case‐Hardened Steels Including Residual Stress Effects

Abstract: Monotonic and cyclic deformations of case‐hardened steel specimens under axial loading were investigated experimentally and analytically. A finite element (FE) model for the case‐hardened specimens was constructed to study multiaxial stresses due to different plastic flow behaviour between the case and the core, as well as to evaluate residual stress relaxation and redistribution subsequent to cyclic loading. The multiaxial stress is shown to increase the effective stress on the surface, and, therefore, unfavourable to yielding or fatigue crack nucleation. The residual stresses are shown to relax or redistribute, even in the elastic‐behaving region, when any part of a case‐hardened specimen or component undergoes plastic deformation. Multi‐layer models were used to analyse and predict monotonic and cyclic deformation behaviours of the case‐hardened specimen based on the core and case material properties, and the results are compared with the experimental as well as FE model results. The predicted monotonic stress–strain curves were close to the experimental curves, but the predicted cyclic stress–strain curves were higher than the experimental curves.     

A critical plane‐energy model for multiaxial fatigue life prediction

A new critical plane‐energy model is proposed in this paper for multiaxial fatigue life prediction of metals. A brief review of existing methods, especially on the critical plane‐based and energy‐based methods, is given first. Special focus is on the Liu–Mahadevan critical plane approach, which has been shown to work for both brittle and ductile metals. One potential drawback of the Liu–Mahadevan model is that it needs an empirical calibration parameter for non‐proportional multiaxial loadings because only the strain terms are used and the out‐of‐phase hardening cannot be explicitly considered. An energy‐based model using the Liu–Mahadevan concept is proposed with the help of the Mróz–Garud plasticity model. Thus, the empirical calibration for non‐proportional loading is not needed because the out‐of‐phase hardening is naturally included in the stress calculation. The model predictions are compared with experimental data from open literature, and the proposed model is shown to work for both proportional and non‐proportional multiaxial loadings without the empirical calibration.     

Fatigue life prediction for butt‐welded joints considering weld‐induced residual stresses and initial damage,relaxation of residual stress,and elasto‐plastic fatigue damage

Fatigue damage of butt‐welded joints is investigated by a damage mechanics method. First, the weld‐induced residual stresses are determined by using a sequentially coupled thermo‐mechanical finite element analysis. The plastic damage of material is then calculated with the use of Lemaitre's plastic damage model. Second, during the subsequent fatigue damage analysis, the residual stresses are superimposed on the fatigue loading, and the weld‐induced plastic damage is considered as the initial damage via an elasto‐plastic fatigue damage model. Finally, the fatigue damage evolution, the relaxation of residual stress, and the fatigue lives of the joints are evaluated using a numerical implementation. The predicted results agree well with the experimental data.     

An efficient 3D implicit approach for the thermomechanical simulation of elastic–viscoplastic materials submitted to high strain rate and damage

This paper aims at presenting a general consistent numerical formulation able to take into account, in a coupled way, strain rate, thermal and damage effects on the behavior of materials submitted to quasistatic or dynamic loading conditions in a large deformation context. The main features of this algorithmic treatment are as follows:

• A unified treatment for the analysis and implicit time integration of thermo‐elasto‐viscoplastic constitutive equations including damage that depends on the strain rate for dynamic loading conditions. This formalism enables us to use dynamic thermomechanically coupled damage laws in an implicit framework.
• An implicit framework developed for time integration of the equations of motion. An efficient staggered solution procedure has been elaborated and implemented so that the inertia and heat conduction effects can be properly treated.
• An operator split‐based implementation, accompanied by a unified method to analytically evaluate the consistent tangent operator for the (implicit) coupled damage–thermo‐elasto‐viscoplastic problem.
• The possibility to couple any hardening law, including rate‐dependent models, with any damage model that fits into the present framework.

All the developments have been considered in the framework of an implicit finite element code adapted to large strain problems. The numerical model will be illustrated by several applications issued from the impact and metal‐forming domains. All these physical phenomena have been included into an oriented object finite element code (implemented at LTAS‐MN ²L, University of Liège, Belgium) named Metafor.Copyright © 2013 John Wiley & Sons, Ltd.     

A novel accumulative fatigue damage model for multiaxial step spectrum considering the variations of loading amplitude and loading path

In this paper, based on the process of the fatigue crack initiation and the critical plane theory, a continuous stress parameter was proposed to quantify the driving force of the fatigue crack initiation for the fully reversed multiaxial fatigue loading. In this stress parameter, the shear stress amplitude and normal stress amplitude on the critical plane were combined with the variable coefficients which were affected by the normalized fatigue life and the loading non‐proportionality. Owing to these coefficients, for the multiaxial loadings with different non‐proportionalities, the driving force of the fatigue crack initiation during the whole life could be described. After that, a novel accumulative fatigue damage model was established for the multiaxial two‐stage step spectrum. In this model, the accumulative damage was calculated according to the variation of the proposed stress parameter on the critical plane. Considering the directionality of the multiaxial fatigue damage, for the spectrum in which the loading path was variable, the damage accumulation was carried out on the critical planes of the both loadings, and the larger one was chosen as the final accumulative fatigue damage. In order to verify the new model, up to 41 different multiaxial two‐stage step spectrum loading tests on 2024‐T4 aluminium alloy were collected. The new model, as well as other five commonly used models, was applied to calculate the accumulative fatigue damage. The final results showed that, compared with other commonly used models, the new model had the most accurate results with the smallest scatters.     

A hybrid frequency–time domain method for predicting multiaxial fatigue life of 7075‐T6 aluminium alloy under random loading

A hybrid frequency–time domain method for predicting multiaxial fatigue life under random loading is developed on the basis of combination of the frequency domain and time domain analysis. The critical damage point of the structure is determined by the frequency domain equivalent stress method. Then, the fatigue life prediction is made in time domain by generating random load‐time histories from the power spectral density of the critical point. The method is validated with the random vibration fatigue test of 7075‐T6 aluminium alloy. It has been shown that the results of fatigue life calculated by hybrid method are well correlated with the experiment.     

A survey on multiaxial fatigue damage parameters under non‐proportional loadings

In this paper, several multiaxial fatigue damage parameters taking into account nonproportional additional hardening are reviewed. According to the way nonproportional additional hardening is considered in the model, the damage parameters are classified into 2 categories: (1) equivalent damage parameters and (2) direct damage parameters. The equivalent damage parameters usually define a nonproportional coefficient to consider nonproportional additional cyclic hardening, and make a combination of this nonproportional coefficient with stress and/or strain quantities to calculate the equivalent damage parameters. In contrast, the direct damage parameters are directly estimated from the stress and strain quantities of interest. The accuracy of 4 multiaxial fatigue damage parameters in predicting fatigue lifetime is checked against about 150 groups of experimental data for 10 different metallic materials under multiaxial fatigue loading. The results revealed that both Itoh's model, one of equivalent damage parameters, and Susmel's model, which belong to direct damage parameters, could provide a better correlation with the experimental results than others assessed in this paper. So direct damage parameters are not better than the equivalent damage parameters in predicting fatigue lifetime.