Interaction between nile blue and immobilized single- or double-stranded DNA and its application in electrochemical recognition

The interactions of nile blue (NB) with calf-thymus double-stranded DNA (dsDNA) in solution, single-stranded DNA (ssDNA) and dsDNA adsorbed on gold electrodes were studied electrochemically. The binding of NB with dsDNA showed a mechanism containing an electrostatic interaction with the binding constant of (5.9 ± 0.2) × 10⁴ M⁻¹ in 0.01 M pH 7.4 Tris-HCl. The presence of adsorbed dsDNA resulted in a great increase in the peak currents of NB in comparison with those obtained at a bare or ssDNA adsorbed gold electrode. The electron transfer rate constants of nile blue adsorbed on bare gold and bound to ss- and dsDNA/Au electrodes were 1.4 ± 0.1, 1.2 ± 0.02 and 2.9 ± 0.2 s⁻¹, respectively. Nile blue showed an electrostatic action with adsorbed ssDNA and an action with adsorbed dsDNA by the mechanism containing both electrostatic and intercalative bindings. The Langmuir adsorption constants of NB at ssDNA/Au and dsDNA/Au electrodes were (1.6 ± 0.2) × 10⁵ and (4.2 ± 0.6) × 10⁵ M⁻¹, respectively. The difference between interactions of NB with adsorbed ss- and dsDNA has been used for hybridization recognition of hepatitis B virus DNA fragment. The interactions between NB and covalently immobilized hepatitis B virus ssDNA fragment and its hybridization product showed the mechanisms similar to those of adsorbed calf-thymus DNA.     

Nucleic acid biosensor for DNA hybridization detection using rutin-Cu as an electrochemical indicator

The complex of rutin-Cu (C₈₁H₈₆Cu₂O₄₈, abbreviated by Cu₂R₃, R = rutin) was synthesized and characterized by elemental analysis and IR spectra. Cyclic voltammetry (CV) and fluorescence spectroscopy were used to investigate the interaction of Cu₂R₃ with salmon sperm DNA. It was revealed that Cu₂R₃ could interact with double-stranded DNA (dsDNA) by a major intercalation role. Using Cu₂R₃ as a novel electroactive indicator, an electrochemical DNA biosensor for the detection of specific DNA fragment was developed and its selectivity for the recognition with different target DNA was assessed by differential pulse voltammetry (DPV). The target DNA related to coliform virus gene could be quantified ranged from 1.62 × 10⁻⁸ mol L⁻¹ to 8.10 × 10⁻⁷ mol L⁻¹ with a good linearity (r = 0.9989) and a detection limit of 2.3 × 10⁻⁹ mol L⁻¹ (3σ, n = 7) was achieved by the constructed electrochemical DNA biosensor.     

Electrocatalytic oxidation and simultaneous determination of uric acid and ascorbic acid on the gold nanoparticles-modified glassy carbon electrode

A new gold nanoparticles-modified electrode (GNP/LC/GCE) was fabricated by self-assembling gold nanoparticles to the surface of the l-cysteine-modified glassy carbon electrode. The modified electrode showed an excellent character for electrocatalytic oxidization of uric acid (UA) and ascorbic acid (AA) with a 0.306 V separation of both peaks, while the bare GC electrode only gave an overlapped and broad oxidation peak. The anodic currents of UA and AA on the modified electrode were 6- and 2.5-fold to that of the bare GCE, respectively. Using differential pulse voltammetry (DPV), a highly selective and simultaneous determination of UA and AA has been explored at the modified electrode. DPV peak currents of UA and AA increased linearly with their concentration at the range of 6.0 × 10⁻⁷ to 8.5 × 10⁻⁴ mol L⁻¹ and 8.0 × 10⁻⁶ to 5.5 × 10⁻³ mol L⁻¹, respectively. The proposed method was applied for the detection of UA and AA in human urine with satisfactory result.     

The ultrasonic electropolymerization of an 5-[o-(4-bromine amyloxy)phenyl]-10,15,20-triphenylporphrin (o-BrPETPP) film electrode and its electrocatalytic properties to dopamine oxidation in aqueous solution

5-[o-(4-Bromine amyloxy)phenyl]-10,15,20-triphenylporphrin (o-BrPETPP) was electropolymerized on a glassy carbon electrode (GCE), and the electrocatalytic properties of the prepared film electrode response to dopamine (DA) oxidation were investigated. A stable o-BrPETPP film was formed on the GCE under ultrasonic irradiation through a potentiodynamic process in 0.1 M H₂SO₄ between −1.1 V and 2.2 V versus a saturated calomel electrode (SCE) at a scan rate of 0.1 V s⁻¹. The film electrode showed high selectivity for DA in the presence of ascorbic acid (AA) and uric acid (UA), and a 6-fold greater sensitivity to DA than that of the bare GCE. In the 0.05 mol L⁻¹ phosphate buffer (pH 6.0), there was a linear relationship between the oxidation current and the concentration of DA solution in the range of 5 × 10⁻⁷ mol L⁻¹ to 3 × 10⁻⁵ mol L⁻¹. The electrode had a detection limit of 6.0 × 10⁻⁸ mol L⁻¹(S/N = 3) when the differential pulse voltammetric (DPV) method was used. In addition, the charge transfer rate constant k = 0.0703 cm s⁻¹, the transfer coefficient α = 0.709, the electron number involved in the rate determining step n_α = 0.952, and the diffusion coefficient D_o = 3.54  10⁻⁵ cm² s⁻¹ were determined. The o-BrPETPP film electrode provides high stability, sensitivity, and selectivity for DA oxidation.     

Sensitive label-free electrochemical DNA hybridization detection in the presence of 11-mercaptoundecanoic acid on the thiolated single strand DNA and mercaptohexanol binary mixed monolayer surface

A ternary surface consisting of the 5′ end 6-mercapto-1-hexane-labeled single-strand DNA (HS-ssDNA) and of thiol alkanes, including 6-mercapto-1-hexanol (MCH) and 11-mercaptoundecanoic acid (MUDA) (abbreviated as HS-ssDNA/MCH/MUDA), was constructed on a polycrystalline gold electrode. Label-free electrochemical sensing of DNA hybridization was performed in the presence of [Fe(CN)₆]³⁻ and the double strand-specific intercalator methylene blue (MB). For comparison, other ternary surfaces were constructed using 3-mercaptopropionic acid (MPA) and 11-mercaptoundecanol (MUD) diluents. The observed discrimination effect (ratio of charge transfer resistance, R_CT, between the hybridized and non-complementary hybridized surfaces) for the different ternary surfaces followed the order of HS-ssDNA/MCH/MUDA (1.89) > HS-ssDNA/MPA/MCH (1.37) > HS-ssDNA/MCH/MUD (1.27) > HS-ssDNA/MPA/MUD (0) = HS-ssDNA/MPA/MUDA (0). Differences in the discrimination effects among the ternary surfaces are related to the pinhole behavior of the molecular layer, which is influenced by the chain length and head group functionalities responsible for the intermolecular hydrogen bonding. This criterion was met only when the difference in the chain lengths of the two alkane diluents in the ternary was less than 50%. While the ternary HS-ssDNA/MCH/MUDA surface showed a detection range of 1 × 10⁻¹⁸ to 1 × 10⁻⁶ M, the ternary HS-ssDNA/MPA/MCH exhibited a range from 1 × 10⁻¹² to 1 × 10⁻⁶ M. The remarkable increase in sensitivity was attributed to the elimination of non-specific Au–DNA interactions and the proper orientation of HS-ssDNA on the ternary surfaces. The surfaces were characterized using cyclic voltammetry (CV), impedance spectroscopy (IS), chronocoulometry (CC) and Fourier-transform infrared (FTIR) spectroscopy.     

Electrochemical biosensor based on the interaction between copper(II) complex with 4,5-diazafluorene-9-one and bromine ligands and deoxyribonucleic acid

The copper complex of 4,5-diazafluorene-9-one (dafone) and bromine ligands ([Cu(dafone)₂]Br₂) was prepared and its interaction with double-stranded salmon sperm DNA (dsDNA) in pH 8.0 Britton-Robinson (B-R) buffer solution was studied by electrochemical experiments at the glassy carbon electrode (GCE). It was revealed that Cu(dafone)₂Br₂ could bind with salmon sperm DNA strands mainly by intercalation mode. The binding number of [Cu(dafone)₂]Br₂ for each salmon sperm dsDNA chain and equilibrium constant of the binding reaction were calculated to be 3 and 2.8 × 10¹² L³ mol⁻³, respectively. The Cu(dafone)₂Br₂ was further utilized as a new electrochemical DNA indicator for the detection of human hepatitis B virus (HBV) DNA fragment by differential pulse voltammetry (DPV). The difference of its electrochemical responses occurred between hybridized dsDNA duplex and probe DNA was explored to assess the selectivity of the developed electrochemical DNA biosensor. The constructed electrochemical DNA biosensor achieved a detection limit of 3.18 × 10⁻⁹ mol L⁻¹ for complementary target DNA and also realized a robust stability and good reusability.     

DNA Langmuir-Blodgett modified glassy carbon electrode as voltammetric sensor for determinate of methotrexate

A highly sensitive electrochemical biosensor for the detection of trace amounts of methotrexate has been designed. Double stranded (ds)DNA molecules are immobilized onto a pretreated glassy carbon electrode (GCE(ox)) surface with Langmuir-Blodgett (LB) technique. The adsorptive voltammetric behaviors of methotrexate on DNA-modified electrode were explored by means of cyclic voltammetry (CV) and square wave voltammetry (SWV). The oxidation mechanism was proposed and discussed in this work. In addition, the optimum experimental conditions for the detection of methotrexate were explored, and the currents measured by SWV presented a good linear property as a function of the concentrations of methotrexate in the range of 2.0 × 10⁻⁸ to 4.0 × 10⁻⁶ mol L⁻¹, with an LOD of 5.0 × 10⁻⁹ mol L⁻¹. The method proposed was applied for the determination of methotrexate in pharmaceutical dosage and diluted human urine with wonderful satisfactory successfully.     

Sensitive DNA impedance biosensor for detection of cancer, chronic lymphocytic leukemia, based on gold nanoparticles/gold modified electrode

A simple and sensitive DNA impedance sensor was prepared for the detection of chronic lymphocytic leukemia. The DNA electrochemical biosensor is worked based on the electrochemical impedance spectroscopic (EIS) detection of the sequence-specific DNA related to chronic lymphocytic leukemia. The ssDNA probe was immobilized on the surface of the gold nanoparticles. Compared to the bare gold electrode, the gold nanoparticles-modified electrode could improve the density of the probe DNA attachment and hence the sensitivity of the DNA sensor greatly. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy were performed in a solution containing 1.0 mmol L⁻¹ K₃[Fe(CN)₆]/K₄[Fe(CN)₆] and 50 mmol L⁻¹ phosphate buffer saline pH 6.87 plus 50 mmol L⁻¹ KCl. In the CV studied, the potential was cycled from 0.0 to +0.65 V with a scan rate of 50 mV s⁻¹. Using EIS, the difference of the electron transfer resistance (ΔR_et) was linear with the logarithm of the complementary oligonucleotides sequence concentrations in the range of 7.0 × 10⁻¹²–2.0 × 10⁻⁷ mol L⁻¹, with a detection limit of 1.0 × 10⁻¹² mol L⁻¹. In addition, the DNA sensor showed a good reproducibility and stability during repeated regeneration and hybridization cycles.     

Studies on the electrochemical behavior of 3-nitrobenzaldehyde thiosemicarbazone at glass carbon electrode modified with nano-γ-Al2O3

Nano-γ-Al₂O₃ is dispersed onto the glass carbon electrode (GCE) by polishing. This nanostructured modified GCE exhibits a great enhancement to the redox responses of 3-nitrobenzaldehyde thiosemicarbazone (3-NBT). In comparison with bare GCE, 3-NBT gives a more sensitive voltammetric response because of the nanoparticle’s unique properties. The lowest detectable concentration (3σ) of 3-NBT is estimated to be 1.18 × 10⁻⁶ M (accumulation for 4 min). The linear relationship between peak current and concentration of 3-NBT holds in the range 1.0 × 10⁻⁵ M to 1.0 × 10⁻⁴ M (r = 0.9981). The electrochemical properties of 3-NBT on this modified electrode have been investigated with various electrochemical methods. The results indicate that the transference of one electron and one proton involves electrode radical reaction processes I and II, respectively. The coverage value (Γ) of 1.62 × 10⁻⁹ mol cm⁻² was calculated and the electrochemical parameters, diffusion coefficient D (2.54 × 10⁻³ cm² s⁻¹, 2.03 × 10⁻³ cm² s⁻¹) and reaction rate constant k_s (5.9573 s⁻¹, 7.15 × 10⁻² cm s⁻¹) were obtained for quasi-reversible system I and irreversible system II, respectively.     

A novel DNA biosensor based on ssDNA/Cyt c/l-Cys/GNPs/Chits/GCE

A novel DNA biosensor was fabricated by modified multilayer of ssDNA, cytochrome c, l-cysteine, metal gold nanoparticles and Chitosan (denoted as ssDNA/Cyt c/l-Cys/GNPs/Chits/GCE). The behavior of the DNA biosensor was then investigated by voltammetry, impedance spectrum and atomic force microscope (AFM), and the morphologic differences among each layer of the DNA biosensor were also observed. Results revealed that two well-defined redox peaks exhibited at 0.120 V and 0.362 V, and the amount of adsorbed DNA was 1.672 × 10⁻¹⁰ mol cm⁻². We concluded that the modified electrode could be used to detect DNA with the indicator daunomycin.     

Electron-transfer characteristics of ferrocene attached to single-walled carbon nanotubes (SWCNT) arrays directly anchored to silicon(1 0 0)

High-density, surface-mounted ferrocene has been prepared using covalent immobilisation of an alcohol substituted ferrocene derivative to a pre-assembled single-walled carbon nanotubes directly anchored to silicon(1 0 0) surface (SWCNTs-Si). The formation of these ferrocene-modified electrodes (Fc-SWCNTs-Si) has been followed using X-ray photoelectron spectroscopy and atomic force microscopy. Electrochemical results show the surface concentration of ferrocenemethanol molecules is 9.26 × 10⁻⁸ mol cm⁻², which is about 500-1000 times greater than the experimentally measured coverage of ferrocene directly attached to flat Si(1 0 0) surfaces. The reversible one-electron wave of the ferrocene/ferrocenium couple was observed at 490 mV versus Ag⁺/Ag and the apparent rate constant of electron transfer, k_app, was 21 s⁻¹. These results suggest these ferrocene-modified electrodes are excellent candidates for molecular memory devices.     

The use of silver solid amalgam electrode for voltammetric and amperometric determination of nitroquinolines

Solid amalgam electrodes represent a suitable alternative to mercury electrodes due to their similar electrochemical properties and non-toxicity of the amalgam material. Nitro derivatives of quinoline have been proven to be genotoxic, thus their presence in environmental samples is a legitimate cause for concern.In this contribution, meniscus modified silver solid amalgam electrode (m-AgSAE) was employed for the batch voltammetric determination and amperometric determination in connection with flow injection analysis of 5-nitroquinoline and 6-nitroquinoline (5-NQ, 6-NQ). Their electrochemical behavior was characterized by cyclic voltammetry, for their determination direct current voltammetry and differential pulse voltammetry were used. Linear calibration curves in the concentration range of 2 × 10⁻⁷ to 1 × 10⁻⁴ mol L⁻¹ were obtained. These results are comparable with results obtained for polarographic determination of the same substances using mercury electrodes. Further, the meniscus modified silver solid amalgam electrode was employed in amperometric detection cell in “wall jet” arrangement for determination of 5-NQ in flow injection analysis. Under optimized conditions (run buffer 0.05 mol L⁻¹ borate buffer, pH 9.0; flow rate 4 mL min⁻¹; detection potential −1.6 V; injection volume 0.1 mL), the limit of quantitation of ∼4 × 10⁻⁶ mol L⁻¹ was achieved. The repeatability of the detector response is satisfactory (relative standard deviation ∼2.15% for c(5-NQ) = 1 × 10⁻⁴ mol L⁻¹). Practical applicability of the method was verified for the determination of micromolar concentrations of 5-NQ in drinking and river water model samples.     

Ru(bpy)3-doped silica nanoparticle DNA probe for the electrogenerated chemiluminescence detection of DNA hybridization

A sensitive electrogenerated chemiluminescence (ECL) detection of DNA hybridization, based on tris(2,2′-bipyridyl)ruthenium(II)-doped silica nanoparticles (Ru(bpy)₃²⁺-doped SNPs) as DNA tags, is described. In this protocol, Ru(bpy)₃²⁺-doped SNPs was used for DNA labeling with trimethoxysilylpropydiethylenetriamine(DETA) and glutaraldehyde as linking agents. The Ru(bpy)₃²⁺-doped SNPs labeled DNA probe was hybridized with target DNA immobilized on the surface of polypyrrole (PPy) modified Pt electrode. The hybridization events were evaluated by ECL measurements and only the complementary sequence could form a double-stranded DNA (dsDNA) with DNA probe and give strong ECL signals. A three-base mismatch sequence and a non-complementary sequence had almost negligible responses. Due to the large number of Ru(bpy)₃²⁺ molecules inside SNPs, the assay allows detection at levels as low as 1.0 × 10⁻¹³ mol l⁻¹ of the target DNA. The intensity of ECL was linearly related to the concentration of the complementary sequence in the range of 2.0 × 10⁻¹³ to 2.0 × 10⁻⁹ mol l⁻¹.     

Voltammetric detection of the interactions between RNO2 and electron acceptors in aqueous medium at highly boron doped diamond electrode (HBDDE)

This paper describes the electrochemical behavior of the nitrofurazone (NFZ), in predominantly aqueous medium, in the absence and presence of glutathione (reduced form) (GSH), l-cysteine (Cys) and O₂ using a highly boron doped diamond electrode (HBDDE). In presence of [Thiol] ≥ 3.7 × 10⁻² mol L⁻¹ NFZ is directly reduced to RNO-Thiol adducts in an electrochemical process involving two electrons and two protons. On the other side, O₂ acts as a RNO₂^•− scavenger and the velocity constant for the reaction, kO₂, is 60 L mol⁻¹ s⁻¹. The process is catalytic and can be used to the analytical determination of NFZ in the range of 9.9 × 10⁻⁷ ≤ [NFZ] ≤ 1.1 × 10⁻⁵ mol L⁻¹ at pH 8.0, with sensitivity of 2.2 × 10⁶ μA mol⁻¹ cm⁻² and detection limit of 3.4 × 10⁻⁷ mol L⁻¹. The analytical parameters were similar to those obtained at pH 4.0 using the direct reduction of NFZ to the respective amine derivative in a process involving six electrons and six protons. The characterization of NFZ global reduction process in aqueous medium and at relative low scan rate, 100 mV s⁻¹, was only possible due the intrinsic superficial characteristics of the HBDDE, which stabilize the RNO₂⁻ free radical, allowing to work in a large potential window, without losing the RNO₂⁻ oxidation signal.     

Catalytic reduction of hydrogen peroxide at metal hexacyanoferrate composite electrodes and applications in enzymatic analysis

The electrocatalytic activity of various metal hexacyanoferrates (Mhcfs) (i) immobilized on graphite electrodes, and (ii) as components of a composite electrode was investigated with respect to the reduction of hydrogen peroxide. The flow-through working electrode was a thin layer consisting of a composite of Mhcf, graphite, and polymethylmetacrylate (PMMA) as a binder, sandwiched between two Plexiglas plates. Among the pure Mhcfs immobilized on a graphite electrode, iron(III) hexacyanoferrate (Prussian blue) exhibits the highest electrocatalytic effect, whereas in the composite electrodes chromium(III) hexacyanoferrate (Crhcf) shows the highest activity and best performance and reproducibility for the electrochemical reduction of H₂O₂. The Crhcf electrode provides a linear dependence on H₂O₂ concentration in the range 2.5 × 10⁻⁶ mol L⁻¹ (LOD) to 1 × 10⁻⁴ mol L⁻¹ (phosphate buffer, pH 7). The sensor was applied for the detection of H₂O₂ enzymatically produced by glucose oxidase. The optimal conditions for the peroxide injection were 2 min after the beginning of the reaction and 25 °C with a detection limit of 7.0 × 10⁻⁶ mol L⁻¹ for glucose.     

Self-assembled nano-arrays of single-walled carbon nanotube-octa(hydroxyethylthio)phthalocyaninatoiron(II) on gold surfaces: Impacts of SWCNT and solution pH on electron transfer kinetics

The construction by sequential self-assembly process of reproducible, highly stable and pH-responsive redox-active nanostructured arrays of single-walled carbon nanotubes (SWCNTs) integrated with octa(hydroxyethylthio)phthalocyaninatoiron(II) (FeOHETPc) via ester bonds on a gold surface (Au-Cys-SWCNT-FeOHETPc) is investigated and discussed. The successful construction of this electrode is confirmed using atomic force microscopy and X-ray photoelectron spectroscopy as well as from the distinct cyclic voltammetric and electrochemical impedance spectroscopic profiles. The Au-Cys-SWCNT-FeOHETPc electrode exhibited strong dependence on the reaction of the head groups and the pH of the working electrolytes, the surface pK_a is estimated as 7.3. The high electron transfer capability of the Au-Cys-SWCNT-FeOHETPc electrode over other electrodes (Au-Cys-SWCNT or the Au-Cys-FeOHETPc or the Au-FeOHETPc) suggests that SWCNT greatly improves the electronic communication between FeOHETPc and the bare gold electrode. The electron transfer rate constant (k_app) of Au-Cys-SWCNT-FeOHETPc in pH 4.8 conditions (∼1.7 × 10⁻² cm⁻² s⁻¹) over that of the electrode obtained from SWCNT integrated with tetraaminophthalocyninatocobalt(II) (Au-Cys-SWCNT-CoTAPc) (5.1 × 10⁻³ cm⁻² s⁻¹) is attributed to the possible effect of the central metal on the phthalocyanine core and substituents on the peripheral positions of the phthalocyanine rings. We also prove that aligned SWCNT arrays exhibit much faster electron transfer kinetics to redox-active species in solutions compared to the randomly dispersed (drop-dried) SWCNTs.     

Preparation, electrochemical behavior and performance of gallium hexacyanoferrate as electrocatalyst of H2O2

The gallium hexacyanoferrate (GaHCF) was synthesized chemically and characterized by FTIR technique. Its electrochemical behavior was carefully investigated by fabricating a GaHCF modified carbon paste electrode in various supporting electrolyte. The experimental results showed that in KNO₃, K₂SO₄, KCl and other supporting electrolyte, GaHCF yielded one pair of ill-defined redox waves with a formal potential of 0.9 V (versus SCE). In 0.050 mol L⁻¹ phosphate buffer solution (PBS, pH 6.8), however, GaHCF yielded one pair of well-defined redox peaks with a formal potential of 0.222 V. Furthermore, this modified electrode exhibited a high electrocatalytic activity toward the reduction of H₂O₂ in pH 6.8 PBS, with over-potential dramatically lower than that of on the bare carbon paste electrode. Amperometry was used for the determination of H₂O₂, under the optimal conditions, a linear dependence of the catalytic current versus H₂O₂ concentration was obtained in the range of 4.9 × 10⁻⁶ to 4.0 × 10⁻⁴ mol L⁻¹ with a detection limit of 1 × 10⁻⁶ mol L⁻¹ when the signal-to-noise ratio was 3, and a sensitivity of 27.9 μA mM⁻¹ (correlation coefficient of 0.997). Chronoamperometry was used to conveniently determine the diffusion coefficient of H₂O₂ in the solution.     

Electroanalytical determination of TBHQ, a synthetic antioxidant, in soybean biodiesel samples

This paper reports an electroanalytical method developed for tert-butylhydroquinone (TBHQ) determination in biodiesel in the presence of surfactant Triton X-100 (T-100). T-100 was shown to improve the electroanalytical signal and its use was decisive for direct analysis of TBHQ in biodiesel, only requiring previous dilution of biodiesel samples in methanol. Several parameters were studied and optimized for the development of this methodology. Under optimal conditions, oxidation peak current was proportional to TBHQ concentration in the range of 1.05-10.10 × 10⁻⁶ mol L⁻¹, with limits of detection and quantification of 3.43 × 10⁻⁸ mol L⁻¹ and 1.14 × 10⁻⁷ mol L⁻¹, respectively, by square wave voltammetry (SWV). The results achieved with the proposed method were satisfactory, relative to those obtained using high-performance liquid chromatography (HPLC).     

A sensitive DNA biosensor fabricated from gold nanoparticles, carbon nanotubes, and zinc oxide nanowires on a glassy carbon electrode

We outline here the fabrication of a sensitive electrochemical DNA biosensor for the detection of sequence-specific target DNA. Zinc oxide nanowires (ZnONWs) were first immobilized on the surface of a glassy carbon electrode. Multi-walled carbon nanotubes (MWCNTs) with carboxyl groups were then dropped onto the surface of the ZnONWs. Gold nanoparticles (AuNPs) were subsequently introduced to the surface of the MWNTs/ZnONWs by electrochemical deposition. A single-stranded DNA probe with a thiol group at the end (HS-ssDNA) was covalently immobilized on the surface of the AuNPs by forming an Au-S bond. Scanning electron microscopy (SEM) and cyclic voltammetry (CV) were used to investigate the film assembly process. Differential pulse voltammetry (DPV) was used to monitor DNA hybridization by measuring the electrochemical signals of [Ru(NH₃)₆]³⁺ bounding to double-stranded DNA (dsDNA). The incorporation of ZnONWs and MWCNTs in this sensor design significantly enhances the sensitivity and the selectivity. This DNA biosensor can detect the target DNA quantitatively in the range of 1.0 × 10⁻¹³ to 1.0 × 10⁻⁷ M, with a detection limit of 3.5 × 10⁻¹⁴ M (S/N = 3). In addition, the DNA biosensor exhibits excellent selectivity, even for single-mismatched DNA detection.     

Electrochemical sensor for sulfite determination based on a nanostructured copper-salen film modified electrode

The electrochemical preparation described herein involved the electrocatalytic oxidation of sulfite on a platinum electrode modified with nanostructured copper salen (salen = N,N′-ethylenebis(salicylideneiminato)) polymer films. The complex was prepared and electropolymerized at a platinum electrode in a 0.1 mol L⁻¹ solution of tetrabutylammonium perchlorate in acetonitrile by cyclic voltammetry between 0 and 1.4 V vs. SCE. After cycling the modified electrode in a 0.50 mol L⁻¹ KCl solution, the estimated surface concentration was found to be equal to 2.2 × 10⁻⁹ mol cm⁻². This is a typical behavior of an electrode surface immobilized with a redox couple that can usually be considered as a reversible single-electron reduction/oxidation of the copper(II)/copper(III) couple. The potential peaks of the modified electrode in the electrolyte solution (aqueous) containing the different anions increase with the decrease of the ionic radius, demonstrating that the counter-ions influence the voltammetric behavior of the sensor. The potential peak was found to be linearly dependent upon the ratio [ionic charge]/[ionic radius]. The oxidation of the sulfite anion was performed at the platinum electrode at +0.9 V vs. SCE. However, a significant decrease in the overpotential (+0.45 V) was obtained while using the sensor, which minimized the effect of oxidizable interferences. A plot of the anodic current vs. the sulfite concentration for chronoamperometry (potential fixed = +0.45 V) at the sensor was linear in the 4.0 × 10⁻⁶ to 6.9 × 10⁻⁵ mol L⁻¹ concentration range and the concentration limit was 1.2 × 10⁻⁶ mol L⁻¹. The reaction order with respect to sulfite was determined by the slope of the logarithm of the current vs. the logarithm of the sulfite concentration.