3D adaptive finite element modeling of non-planar curved crack growth using the weighted superconvergent patch recovery method

In this paper, an adaptive finite element analysis is presented for 3D modeling of non-planar curved crack growth. The fracture mechanical evaluation is performed based on a general technique for non-planar curved cracks. The Schollmann’s crack kinking criterion is used for the process of crack propagation in 3D problems. The Zienkiewicz-Zhu error estimator is employed in conjunction with a weighted SPR technique at each patch to improve the accuracy of error estimation. Applying the proposed technique to 3D non-planar curved crack growth problems shows significant improvements particularly at the boundaries and near crack tip regions. Several numerical examples are presented to illustrate the robustness of the proposed technique.     

New a posteriori error estimator and adaptive mesh refinement strategy for 2-D crack problems

A posteriori error estimation and adaptive refinement technique for fracture analysis of 2-D/3-D crack problems is the state-of-the-art. The objective of the present paper is to propose a new a posteriori error estimator based on strain energy release rate (SERR) or stress intensity factor (SIF) at the crack tip region and to use this along with the stress based error estimator available in the literature for the region away from the crack tip. The proposed a posteriori error estimator is called the K-S error estimator. Further, an adaptive mesh refinement (h-) strategy which can be used with K-S error estimator has been proposed for fracture analysis of 2-D crack problems. The performance of the proposed a posteriori error estimator and the h-adaptive refinement strategy have been demonstrated by employing the 4-noded, 8-noded and 9-noded plane stress finite elements. The proposed error estimator together with the h-adaptive refinement strategy will facilitate automation of fracture analysis process to provide reliable solutions.     

Modeling of cohesive crack growth using an adaptive mesh refinement via the modified-SPR technique

In this paper, an adaptive finite element procedure is presented in modeling of mixed-mode cohesive crack propagation via the modified superconvergent path recovery technique. The adaptive mesh refinement is performed based on the Zienkiewicz–Zhu error estimator. The weighted-SPR recovery technique is employed to improve the accuracy of error estimation. The Espinosa–Zavattieri bilinear cohesive zone model is applied to implement the traction-separation law. It is worth mentioning that no previous information is necessary for the path of crack growth and no region of the domain is necessary to be filled by the cohesive elements. The maximum principal stress criterion is employed for predicting the direction of extension of the cohesive crack in order to implement the cohesive elements. Several numerical examples are analyzed numerically to demonstrate the capability and efficiency of proposed computational algorithm.     

A finite element method with mesh‐separation‐based approximation technique and its application in modeling crack propagation with adaptive mesh refinement

This paper presents a FEM with mesh‐separation‐based approximation technique that separates a standard element into three geometrically independent elements. A dual mapping scheme is introduced to couple them seamlessly and to derive the element approximation. The novel technique makes it very easy for mesh generation of problems with complex or solution‐dependent, varying geometry. It offers a flexible way to construct displacement approximations and provides a unified framework for the FEM to enjoy some of the key advantages of the Hansbo and Hansbo method, the meshfree methods, the semi‐analytical FEMs, and the smoothed FEM. For problems with evolving discontinuities, the method enables the devising of an efficient crack‐tip adaptive mesh refinement strategy to improve the accuracy of crack‐tip fields. Both the discontinuities due to intra‐element cracking and the incompatibility due to hanging nodes resulted from the element refinement can be treated at the elemental level. The effectiveness and robustness of the present method are benchmarked with several numerical examples. The numerical results also demonstrate that a high precision integral scheme is critical to pass the crack patch test, and it is essential to apply local adaptive mesh refinement for low fracture energy problems. Copyright © 2014 John Wiley & Sons, Ltd.     

Analysis of mixed-mode dynamic crack propagation by interface element based on virtual crack closure technique

An interface element tailored for the virtual crack closure technique (VCCT) was used to study an example of dynamic crack propagation under mixed mode loading. Through this interfacial element approach, VCCT can be implemented into a commercial finite element analysis (FEA) code having user subroutines without interrupting the main code. Further, with the implementation of relevant fracture criteria, this interface element can be used to simulate a wide range of fracture problems by utilizing the enhanced capabilities available by the commercial FEA codes. For illustration, this element has been implemented with the commercial FEA software ABAQUS^® through the user defined element (UEL). One example of fast crack propagation at constant speed and under mixed-mode loading was examined by comparison to the other’s numerical results using singular moving elements. No convergence difficulty was encountered for all the cases with different values of crack velocity. Neither singular element, nor the collapsed element was required. Therefore, due to its simplicity, the VCCT interface element as demonstrated could be a potential tool for engineers to practice dynamic fracture analysis in conjunction with commercial FEA codes.     

The effect of load ratio on fatigue life and crack propagation behavior of an extruded magnesium alloy

Fatigue experiments were carried out in laboratory air using an extruded magnesium alloy, AZ31, to investigate the effect of load ratio on the fatigue life and crack propagation behavior. The crack propagation behavior was analyzed using a modified linear elastic fracture mechanics parameter, M. The relation crack propagation rate vs. M parameter was found to be useful in predicting fatigue lives at different R ratios. Good agreement between the estimated and the experimental results at each stress ratio was obtained.