Direct electrochemistry and biocatalytic activity of hemoglobin entrapped into gellan gum and room temperature ionic liquid composite system

A new composite film of microbial exocellular polysaccharide-gellan gum (GG) and room temperature ionic liquid (IL) 1-butyl-3-methyl-imidazolium hexafluorophosphate (BMIMPF₆) was firstly used as an immobilization matrix to entrap proteins and its bioelectrochemical properties were studied. Hemoglobin (Hb) was chosen as a model protein to investigate the composite system. UV-vis spectroscopy, cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) were used to characterize the composite film. The obtained results demonstrated that the Hb molecule in the film kept its native structure and showed its good electrochemical behavior. A pair of well-defined, quasi-reversible cyclic voltammetric peaks appeared in pH 7.0 phosphate buffer solutions (PBS, 0.1 M), with the formal potential (E°′) of −0.368 V (vs. SCE), which was the characteristic of Hb Fe(III)/Fe(II) redox couples. The Hb-IL-GG-modified electrode also showed an excellent electrocatalytic behavior to the reduction of hydrogen peroxide (H₂O₂). Therefore, this kind of composite film as a novel substrate offers an efficient strategy and a new promising platform for further study on the direct electrochemistry of redox proteins and the development of the third-generation electrochemical biosensors.     

Direct electrochemistry of Cytochrome c on natural nano-attapulgite clay modified electrode and its electrocatalytic reduction for H2O2

Natural nano-structural attapulgite clay was purified by mechanical stirring with the aid of ultrasonic wave and its structure and morphology was investigated by XRD and transmission electron microscopy (TEM). Cytochrome c was immobilized on attapulgite modified glassy carbon electrode. The interaction between Cytochrome c and attapulgite clay was examined by using UV-vis spectroscopy and electrochemical methods. The direct electron transfer of the immobilized Cytochrome c exhibited a pair of redox peaks with formal potential (E0′) of about 17 mV (versus SCE) in 0.1 mol/L, pH 7.0, PBS. The electrode reaction showed a surface-controlled process with the apparent heterogeneous electron transfer rate constant (k_s) of 7.05 s⁻¹ and charge-transfer coefficient (α) of 0.49. Cytochrome c immobilized on the attapulgite modified electrode exhibits a remarkable electrocatalytic activity for the reduction of hydrogen peroxide (H₂O₂). The calculated apparent Michaelis-Menten constant was 470 μmol/L, indicating a high catalytic activity of Cytochrome c immobilized on attapulgite modified electrode to the reduction of H₂O₂. Based on these, a third generation of reagentless biosensor can be constructed for the determination of H₂O₂.     

Enhanced direct electron transfer reactivity of hemoglobin in cationic gemini surfactant-room temperature ionic liquid composite film on glassy carbon electrodes

A novel composite film comprising cationic gemini surfactant butyl-α,ω-bis(dimethylcetylammonium bromide) (C₁₆H₃₃N(CH₃)₂-C₄H₈-N(CH₃)₂C₁₆H₃₃, C₁₆-C₄-C₁₆) and ionic liquid 1-octyl-3-methylimidazolium hexafluorophate (OMIMPF₆) has been prepared. The composite film shows good biocompatibility and it can promote the direct electron transfer between hemoglobin (Hb) and glassy carbon (GC) electrode. On the C₁₆-C₄-C₁₆ (dissolved in ethanol)-OMIMPF₆ film coated GC electrode, the immobilized Hb can exhibit a pair of well-defined, quasi-reversible and stable redox peaks with a formal potential of −0.317 V (vs SCE) in 0.10 M pH 7 phosphate buffer solutions. The electron transfer coefficient (α) of Hb is calculated to be 0.44 and the heterogeneous electron transfer rate constant is 6.08 s⁻¹. With the length of alkyl chains of gemini surfactant increasing and the ethanol concentration rising, the redox peaks of the resulting electrode C₁₆-C₄-C₁₆-OMIMPF₆-Hb/GC become bigger. The electrode presents good electrocatalytic response to peroxide hydrogen. The kinetic parameters I_max and k_m for the catalytic reaction are estimated. In addition, UV-vis spectra and reflectance absorption infrared spectra demonstrate that the Hb immobilized in the C₁₆-C₄-C₁₆-OMIMPF₆ film almost retains the structure of native Hb.     

Direct electron-transfer and electrochemical catalysis of hemoglobin immobilized on mesoporous Al2O3

The direct electrochemistry of hemoglobin (Hb) has been achieved by immobilizing Hb on mesoporous Al₂O₃ (meso-Al₂O₃) film modified glassy carbon (GC) electrode. Meso-Al₂O₃ shows significant promotion to the direct electron-transfer of Hb, thus it exhibits a pair of well defined and quasi-reversible peaks with a formal potential of −0.345 V (vs. SCE). The electron-transfer rate constant (k_s) is estimated to be 3.17 s⁻¹. The immobilized Hb retains its biological activity well and shows high catalytic activity to the reduction of hydrogen peroxide (H₂O₂) and nitrite (NO₂⁻). Under the optimized experimental conditions, the catalytic currents are linear to the concentrations of H₂O₂ and NO₂⁻ in the ranges of 0.195-20.5 μM and 0.2-10 mM, respectively. The corresponding detection limits are 1.95 × 10⁻⁸ M and 3 × 10⁻⁵ M (S/N = 3). The resulting protein electrode has high thermal stability and good reproducibility due to the protection effect of meso-Al₂O₃. Ultraviolet visible (UV-vis) absorption spectra and reflection-absorption infrared (RAIR) spectra display that Hb keeps almost natural structure in the meso-Al₂O₃ film. The N₂ adsorption-desorption experiments show that the pore size of meso-Al₂O₃ is about 14.4 nm, suiting for the encapsulation of Hb (average size: 5.5 nm) well. Therefore, meso-Al₂O₃ is an alternative matrix for protein immobilization and biosensor preparation.     

Direct electrochemistry of horseradish peroxidase on graphene-modified electrode for electrocatalytic reduction towards H2O2

Graphene was synthesized by a chemical method to reduce graphite oxide and well characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), powder X-ray diffraction (PXRD) and Fourier transform infrared (FTIR) spectra. Horseradish peroxidase (HRP) immobilized on a graphene film glassy carbon electrode was found to undergo direct electron transfer and exhibited a fast electron transfer rate constant of 4.63 s⁻¹. The HRP-immobilized electrode was investigated by electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The CV results showed that the modified electrode gave rise to well-defined peaks in phosphate buffer, corresponding to the electrochemical redox reaction between HRP–Fe(III) and HRP–Fe(II). The obtained electrode also displayed an electrocatalytic reduction behavior towards H₂O₂. The new H₂O₂ sensor shows a linear range of 0.33–14.0 μM (R² = 0.9987) with a calculated detection limit of 0.11 μM (S/N = 3). Furthermore, the biosensor exhibits both good operational storage and storage stability.     

Direct electron transfer of cytochrome c immobilized on a NaY zeolite matrix and its application in biosensing

The immobilization and electrochemical behaviors of cytochrome c on a NaY zeolite modified electrode were studied. The interaction between cytochrome c and NaY zeolite particles was examined by using UV-Vis spectroscopy and electrochemical methods. The direct electron transfer of the immobilized cytochrome c exhibited a pair of redox peaks with the E_1/2 of (versus SCE) in 0.1 M pH 7.0 PBS. The electrode reaction showed a surface-controlled process with a single proton transfer at the scan rate range from 20 to 500 mV s⁻¹. Based on the immobilization of cytochrome c on NaY zeolite a high performance biosensor was constructed, which displayed an excellent response to the reduction of hydrogen peroxide (H₂O₂) without the aid of an electron mediator and could be used for H₂O₂ detection. NaY zeolite provided a good matrix for protein immobilization and biosensor preparation.     

Direct synthesis of H2O2 acid solutions on carbon cathode prepared from activated carbon and vapor-growing-carbon-fiber by a H2/O2 fuel cell

Direct synthesis of H₂O₂ acid solutions was studied using a gas-diffusion cathode prepared from activated carbon (AC), vapor-growing-carbon-fiber (VGCF) and poly-tetra-fluoro-ethylene (PTFE) powders, with a new H₂/O₂ fuel cell reactor. O₂ reduction to H₂O₂ was remarkably enhanced at the three-phase boundary (O₂(g)-electrode(s)-acid(l)) at the [AC + VGCF] cathode. Fast diffusion processes of O₂ to the active surface and of H₂O₂ to the bulk acid solutions were essential for H₂O₂ accumulation. Synergy of AC and VGCF was observed for the H₂O₂ formation. RRDE and cyclic voltammetry studies indicated that the surface of AC functioned as the active phase for O₂ reduction to HO₂, and VGCF functioned as an electron conductor and a promoter to convert HO₂ to H₂O₂. A maximum H₂O₂ concentration of 353 mM (1.2 wt%) was accomplished under short-circuit conditions (current density 12.7 mA cm⁻², current efficiency 40.1%, geometric area of cathode 1.3 cm², reaction time 6 h).     

Preparation, performances and reaction mechanism for the synthesis of H2O2 from H2 and O2 based on palladium membranes

A series of new tubular catalytic membranes (TCM's) have been prepared and tested in the direct synthesis of H₂O₂. Such TCM's are asymmetric -alumina mesoporous membranes supported on macroporous -alumina, either with a subsequent carbon coating (CAM) or without (AAM). Pd was introduced by two different impregnation techniques. Deposition–precipitation (DP) was applied to CAM's to obtain an even Pd particles distribution inside the membrane pore network, whereas electroless plating deposition (EPD) was successfully applied to AAM's to give a 1–10 μm thick nearly-dense Pd layer. Both type of membranes were active in the direct synthesis of H₂O₂. Catalytic tests were carried out in a semi-batch re-circulating reactor under very mild conditions. Concentrations as high as 250–300 ppm H₂O₂ were commonly achieved with both CAM's and AAM's after 6–7 h time on stream, whereas the decomposition rate was particularly high in the presence of H₂. Important features are the temperature control and pre-activation. In order to slow down the decomposition and favor the synthesis of H₂O₂ a smooth metal surface is needed.     

Electrochemistry and electrocatalysis of hemoglobin on multi-walled carbon nanotubes modified carbon ionic liquid electrode with hydrophilic EMIMBF4 as modifier

The direct electrochemistry of hemoglobin (Hb) on multi-walled carbon nanotubes (MWCNTs) modified carbon ionic liquid electrode (CILE) was achieved in this paper. By using a hydrophilic ionic liquid 1-ethyl-3-methylimidazolium tetrafluoroborate (EMIMBF₄) as the modifier, a new CILE was fabricated and further modified with MWCNTs to get the MWCNTs/CILE. Hb molecules were immobilized on the surface of MWCNTs/CILE with polyvinyl alcohol (PVA) film by a step-by-step method and the modified electrode was denoted as PVA/Hb/MWCNTs/CILE. UV-vis and FT-IR spectra indicated that Hb remained its native structure in the composite film. Cyclic voltammogram of PVA/Hb/MWCNTs/CILE showed a pair of well-defined and quasi-reversible redox peaks with the formal potential (E^0′) of −0.370 V (vs. SCE) in 0.1 mol/L pH 7.0 phosphate buffer solution (PBS), which was the characteristic of the Hb heme Fe^III/Fe^II redox couples. The redox peak currents increased linearly with the scan rate, indicating the direct electron transfer was a surface-controlled process. The electrochemical parameters of Hb in the film were calculated with the results of the electron transfer coefficient (α) and the apparent heterogeneous electron transfer rate constant (k_s) as 0.49 and 1.054 s⁻¹, respectively. The immobilized Hb in the PVA/MWCNTs composite film modified CILE showed excellent electrocatalytic activity to the reduction of trichloroacetic acid (TCA) and hydrogen peroxide. So the proposed electrode showed the potential application in the third generation reagentless biosensor.     

Fabrication of carbon paste electrode containing [PFeW11O39] polyoxoanion supported on modified amorphous silica gel and its electrocatalytic activity for H2O2 reduction

[PFeW₁₁O₃₉]⁴⁻ (PFeW₁₁) supported on the surface of 3-aminopropyl(triethoxy)silane modified silica gel was synthesized and used as a bulk modifier to fabricate a renewable three-dimensional chemically modified electrode. The electrochemical behavior of the modified electrode was investigated. Cyclic voltammetry studies showed that the PFeW₁₁ on the electrode surface sustained the same electrochemical properties as that of the PFeW₁₁ in solution. The preparation of chemically modified electrode is simple and quiet reproducible using inexpensive material. The modified electrode had high electrocatalytic activity toward H₂O₂ reduction and it was successfully applied as an electrochemical detector to monitor H₂O₂ in flow injection analysis (FIA). The electrocatalytic peak current was found to be linear with the H₂O₂ concentration in the range 10-200 μmol L⁻¹ with a correlation coefficient of 0.998 and a detection limit (3σ) of 7.4 μmol L⁻¹ H₂O₂. The electrode has the remarkable advantage of surface renewal owing to bulk modification, as well as simple preparation, good mechanical and chemical stability and reproducibility.     

Selective determination of ascorbic acid with a novel hybrid material based 1-butyl-3-methylimidazolium tetrafluoroborate ionic liquid and the Dawson type ion [P2Mo18O62] immobilized on glassy carbon

In this study, we synthesized a new hybrid material using well-Dawson K₆[P₂Mo₁₈O₆₂]·nH₂O and a room temperature ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM][BF₄]). CHN elemental analysis showed that one mole of [P₂Mo₁₈O₆₂]⁶⁻ reacts with 6 moles of [BMIM]⁺ to form [BMIM]₆P₂Mo₁₈O₆₂. FT-IR spectra showed the presence of both 1-butyl-3-methylimidazolium cation and the Dawson anion. TG analysis displayed a relative thermal stability of the hybrid material compared to the parent Dawson POM. The new hybrid material [BMIM]₆P₂Mo₁₈O₆₂ was immobilized on glassy carbon (GC) electrode and the modified electrode was investigated by cyclic voltammetry and amperometry. Compared to the electrochemical behavior of dissolved [P₂Mo₁₈O₆₂]⁶⁻, a slight shift in the redox peaks towards negative potentials is observed for the immobilized [BMIM]₆P₂Mo₁₈O₆₂. The relationship between the peak currents of the deposited [BMIM]₆P₂Mo₁₈O₆₂ film and scan rate is shown to be linear, which demonstrates a surface-confined electron transfer processes. [BMIM]₆P₂Mo₁₈O₆₂ modified electrode showed high sensitivities towards pH and shown to be active even at neutral pH. [BMIM]₆P₂Mo₁₈O₆₂ modified GC electrode was subjected to cyclic voltammetry and amperometry in the presence of ascorbic acid (AA) and found to exhibit a remarkable catalytic activity towards the oxidation of AA. The catalytic oxidation peak of AA at [BMIM]₆P₂Mo₁₈O₆₂ modified GC electrode occurs at low potential of ∼0 V vs Ag/AgCl at neutral pH and shifts to more positive potentials when pH decreases. Comparison between [BMIM]₆P₂Mo₁₈O₆₂ and [P₂Mo₁₈O₆₂]⁶⁻ modified GC films towards the oxidation of AA suggests that the significant decrease in the overpotentials recorded with [BMIM]₆P₂Mo₁₈O₆₂ film is related to the presence of ionic liquid cation in the hybrid material, which probably plays the role of the redox mediator. The resulting AA sensor [BMIM]₆P₂Mo₁₈O₆₂/GC has a significant sensitivity of ∼63 nA/μM AA, fast response time (<9 s), low detection limit (<0.1 μM), high selectivity towards endogenous interferences such as uric acid, acetaminophen and dopamine, a linear range from 0.1 μM to at least 22 mM AA and was stable for at least 2 weeks. In addition, such AA sensors can operate in a pH range from 0 to at least 7.     

Preparation and characterization of room temperature ionic liquid/single-walled carbon nanotube nanocomposites and their application to the direct electrochemistry of heme-containing proteins/enzymes

This work describes the formation and possible electrochemical application of a novel nanocomposite based on single-walled carbon nanotubes (SWNTs) and imidazolium-based room-temperature ionic liquids (RTILs) of 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim]BF₄, a hydrophilic RTIL) and 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim]PF₆, a hydrophobic RTIL). The nanocomposites ([bmim]BF₄-SWNTs, and [bmim]PF₆-SWNTs) were formed by simply grinding the SWNTs with the respective RTIL. The results of the X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy indicated that the nanocomposites were formed by adsorption of an imidazolium ion on the surface of SWNTs via the “cation-π” interaction. SEM images showed that [bmim]BF₄-SWNTs (or [bmim]PF₆-SWNTs) nanocomposites could uniformly cover the surface of a glassy carbon (GC) electrode resulting in a RTILs-SWNTs/GC modified electrode with a high stability. The RTILs-SWNTs composite could be readily used as a matrix to immobilize heme-containing proteins/enzymes (myoglobin, cytochrome c, and horseradish peroxidase) without undergoing denaturation, as was verified by UV-vis and circular dichroic (CD) spectroscopic results. The voltammetric results showed that heme-containing proteins/enzymes entrapped in RTILs-SWNTs composites displayed a pair of well-defined, stable redox peaks, which were ascribed to their direct electron-transfer reactions. The results of controlled experiments showed that the positive charged imidazolium ion played a significant effect on the electrochemical parameters, such as the redox peak separation and the value of the formal potentials, etc., of the electron-transfer reaction of non-neutral species dissolved in solution or immobilized on the electrode surface. Further results demonstrated that the heme-containing proteins/enzymes entrapped in RTILs-SWNTs composites could still retain their bioelectrocatalytic activity toward the reduction of oxygen and hydrogen peroxide. The results depicted in this work may pave a new avenue to electrocatalysis, proteins/enzymes electrochemistry, and bioelectrochemical synthesis, etc.     

利用离子液体[BMIM]2[CR]萃取牛血清蛋白的研究

利用离子交换过程将亲和性染料刚果红合成为[BMIM]2[CR],并进行牛血清蛋白萃取实验。研究结果表明,[BMIM]2[CR]离子液体的浓度为10 mmol/L,萃取时间为30 min以及溶液呈酸性时,对牛血清蛋白的萃取效果最佳,可达90%以上。该研究可为[BMIM]2[CR]实际蛋白质萃取应用中提供一定的可行性条件。     

Desulfurization of diesel via the H2O2 oxidation of aromatic sulfides to sulfones using a tungstate catalyst

A simplified oxidative desulfurizataion (ODS) catalytic system composed of Na₂WO₄, 30% H₂O₂ and CH₃CO₂H has been found suitable for the deep removal of sulfur in diesel. By combining ODS and methanol extraction, the sulfur level in a commercial diesel has been reduced from 1100 ppm to 40 ppm. Treatment of model solutions of octane containing dibenzothiophene and 4,6-dimethyl dibenzothiophene with our ODS system shows 100% conversion of the thiophenes to sulfones at 70 °C in less than 1 h.     

An efficient electron transfer at the Fe/iron oxide interface for the photoassisted degradation of pollutants with H2O2

Fe-200 was synthesized through the calcination of iron powder at 200 °C for 30 min in air. On the basis of characterization by X-ray diffraction and X-ray photoelectron spectroscopy, Fe-200 had a core–shell structure, in which the surface layer was mainly composed of Fe₂O₃ with some FeOOH and FeO, and the core retained metallic iron. The kinetics and mechanism of the interfacial electron transfer on Fe-200 were investigated in detail for the photoassisted degradation of organic pollutants with H₂O₂. Under deoxygenated conditions in the dark, the generation of hydroxyl radicals in aqueous Fe-200 dispersion verified that galvanic cells existed at the interface of Fe⁰/iron oxide, indicating the electron transfer from Fe⁰ to Fe³⁺. Furthermore, the effects of hydrogen peroxide and different organic pollutants on the interfacial electron transfer were examined by the change rate of the Fe³⁺ concentration in the solution. The results indicated that hydrogen peroxide provided a driving force in the electron transfer from Fe²⁺ to Fe³⁺, while the degradation of organic pollutants increased the electron transfer at the interface of Fe⁰/iron oxide due to their reaction with OH.     

A calorimetric analysis of a polymer electrolyte fuel cell and the production of H2O2 at the cathode

A calorimeter has been constructed and used to measure the total heat production of a single polymer electrolyte fuel cell that is operated on hydrogen and oxygen at 50 °C and 1 bar. The cell had a SolviCore Catalyst Coated Backing and Nafion membranes 112, 115 and 117. We report that the total heat production plus the power production corresponds to the enthalpy of formation of water for cell potentials above 0.55 V. For cell potentials less than 0.55 V, we measured a linear decrease in the reaction enthalpy with decreasing cell potential. This effect was obtained independently of membrane thickness and current density. We propose therefore that the main power loss at low cell potentials and the inflection point in the polarisation curve is due to hydrogen peroxide formation at the cathode. The total heat production was decomposed into reversible and irreversible effects (non-ohmic and ohmic). The non-ohmic part was evaluated using Tafel plots. We show that it is possible to determine the overpotential of an electrode also from its thermal signature.     

Reconsideration of the quantitative characterization of the reaction intermediate on electrocatalysts by a rotating ring-disk electrode: The intrinsic yield of H2O2 on Pt/C

To solve the problem of the catalyst-loading-effect on quantifying the reaction intermediates on the surface of electrocatalysts with a rotating ring-disk electrode, we studied the formation of hydrogen peroxide in the oxygen reduction reaction on Pt/C with various sample loadings and then proposed an extrapolation model for measuring the intrinsic yield of H₂O₂, which can quantitatively reflect the characteristics of the surface of a given catalyst. In the extrapolation model, the catalyst loading effect can be compensated by taking the catalyst loading-dependent probability of the re-adsorption + further reaction of the desorbed H₂O₂ into consideration. The core concept in this extrapolation model is that the probability of the re-adsorption + reaction of the desorbed H₂O₂ becomes zero if there is no other active site available (i.e., at the extrapolated hypothetical point of zero catalyst loading) for re-adsorption of the desorbed H₂O₂. The intrinsic yield of H₂O₂ by extrapolation was much higher than that measured by the conventional model, in which the re-adsorption + reaction of the desorbed H₂O₂ is not considered, and thus the catalyst loading-dependent apparent yield of H₂O₂ does not properly reflect the intrinsic characteristics of the surface of a given catalyst.     

Layer-by-layer self-assembled nanostructured phthalocyaninatoiron(II)/SWCNT-poly(m-aminobenzenesulfonic acid) hybrid system on gold surface: Electron transfer dynamics and amplification of H2O2 response

The fabrication of nanostructured platform of poly(m-aminobenzenesulfonic acid) functionalised single-walled carbon nanotubes (SWCNTs-PABS)-iron(II)phthalocyanine nanoparticles (nanoFePc) using layer-by-layer(LBL) self-assembly strategy is described. The substrate build-up, via strong electrostatic interaction, was monitored using atomic force microscopy (AFM) and electrochemical measurements. As the number of bilayers is increased, the electron transfer kinetics of the ferricyaninde/ferrocyanide redox probe is decreased, while the electrochemical reduction of H₂O₂ at a constant concentration is amplified. The amplification of the electrochemical response to H₂O₂ detection suggests that this type of electrode could provide an important nano-architectural sensing platform for the development of a sensor.