压电压磁双层材料界面裂纹断裂特性进一步分析

该文利用积分变换和奇异积分方程技术研究压电压磁双材料界面裂纹在磁导、电位移和机械载荷作用下的二维断裂问题。本文仅考虑四种理想的裂纹面电磁边界条件即磁电不导通(情形1)、磁导通电不导通(情形2)、磁不导通电导通(情形3)和磁电导通(情形4)。导出了应力强度因子(SIF)和能量释放率(ERR)的表达式,给出了ERR的大量数值结果,并与已有结果进行了对比。研究成果对压电压磁多层复合结构的设计具有理论与应用价值。     

磁电弹性功能梯度板共线Griffith裂纹断裂行为

该文考察了磁电弹性功能梯度板的反平面问题。该板具有多个垂直于边界的共线裂纹。裂纹表面采用磁电不穿透或可穿透假设。应用积分变换和位错密度函数将问题化为柯西奇异积分方程求解。导出和分析了场强度因子和能量释放率。数值结果表明了载荷组合参数、材料梯度指数及裂纹构形对裂尖断裂行为的影响。     

Crack in a bonded functionally graded magneto-electro-elastic strip

Investigated is the anti-plane problem of functionally graded magneto-electro-elastic strip sandwiched between two functionally graded strips. It is assumed that the material properties vary exponentially with the coordinate parallel to the crack. The crack is assumed to be either magneto-electrically impermeable or permeable. Fourier transforms are used to reduce the crack problems to a system of singular integral equations, which is solved numerically by application of the Gauss–Chebyshev integration formula. Numerical results show the effects of the material gradient parameter and crack configuration on the field intensity factors of the crack.     

加层电磁弹性材料界面裂纹瞬态响应

研究加层电磁弹性材料界面裂纹在反平面剪切冲击载荷和面内电磁冲击载荷作用下的动态响应问题。假设裂纹面是电磁不导通的。采用Laplace变换、Fourier变换和位错密度函数将混合边值问题转化为求解Laplace域内Cauchy奇异积分方程。讨论了磁冲击载荷、电冲击载荷、材料参数及加层厚度对能量释放率的影响。该问题的解有助于分析含裂纹电磁弹性材料的动态断裂特性。     

Transient analysis of a piezoelectric strip with a permeable crack under anti-plane impact loads

The problem of a through permeable crack situated in the mid-plane of a piezoelectric strip is considered under anti-plane impact loads for two cases. The first is that the strip boundaries are free of stresses and of electric displacements, and the second is that the strip boundaries are clamped rigid electrodes. The method adopted is to reduce the mixed initial-boundary value problem, by using integral transform techniques, to dual integral equations, which are further transformed into a Fredholm integral equation of the second kind by introducing an auxiliary function. The dynamic stress intensity factor and energy release rate in the Laplace transform domain are obtained in explicit form in terms of the auxiliary function. Some numerical results for the dynamic stress intensity factor are presented graphically in the physical space by using numerical techniques for solving the resulting Fredholm integral equation and inverting Laplace transform.     

Scattering of SH waves by an arc-shaped interface crack between a cylindrical magneto-electro-elastic inclusion and matrix with the symmetry of 6 mm

Summary Investigated are the scattered field properties of SH waves by a magneto-electro-elastic cylindrical inclusion partially debonded from its surrounding magneto-electro-elastic material in this paper. The debonding region is modeled as an arc-shaped interface crack with magneto-electrically permeable surfaces. By expressing the scattered fields as the wave function expansions with unknown coefficients, the mixed boundary value problem is first reduced to a set of dual series equations. Then the dislocation density function is introduced as an unknown to transform the dual series equations to a Cauchy singular integral equation of the first type, which can be solved numerically. Finally, the scattered field intensity factor, the scattered far field pattern and scattered cross section are obtained. The effects of incident direction, crack opening angle and material combination on the properties of both near fields and far fields are respectively examined graphically. The solution of this problem is relevant to ultrasonic nondestructive detection of the debonding between two dissimilar magneto-electro-elastic materials and is expected to have applications to the question of how dynamic loading can lead to growth of debonds.     

Electroelastic analysis of an interface anti-plane shear crack in a layered piezoelectric plate

The problem of an anti-plane interface crack in a layered piezoelectric plate composed of two bonded dissimilar piezoelectric ceramic layers subjected to applied voltage is considered. It is assumed that the crack is either impermeable or permeable. An integral transform technique is employed to reduce the problem considered to dual integral equations, then to a Fredholm integral equation by introducing an auxiliary function. Field intensity factors and energy release rate are obtained in explicit form in terms of the auxiliary function. In particular, by solving analytically a resulting singular integral equation, they are determined explicitly in terms of given electromechanical loadings for the case of two bonded layers of equal thickness. Some numerical results are presented graphically to show the influence of the geometric parameters on the field intensity factors and the energy release rate.     

压电弹性体中光滑顶点的正三角形孔边裂纹的反平面问题分析

通过构造新的保角映射,利用复变函数的方法,研究了含光滑顶点的正三角形孔边裂纹的横观各向同性的压电弹性体的反平面问题。在电可穿透和电不可穿透裂纹、孔周及裂纹面为自由表面的假设下,充分利用Cauchy积分公式和复变函数方法,得到了裂纹尖端的场强度因子和能量释放率的表达式。数值算例显示了在不同边界条件下裂纹的几何尺寸、机电载荷对能量释放率和机械应变能释放率的影响规律。结果表明:在电可通和电不可通边界条件下,裂纹长度和三角形边长的增加会导致能量释放率增加,机械载荷则总是促进裂纹的扩展。在电不可通边界条件下电位移可以促进或抑制裂纹的扩展,而在电可通边界条件下电位移对裂纹扩展没有影响。     

Moving Dugdale crack along the interface of two dissimilar magnetoelectroelastic materials

In this paper, the concept of Dugdale crack model and Yoffe model is extended to propose a moving Dugdale interfacial crack model, and the interfacial crack between dissimilar magnetoelectroelastic materials under anti-plane shear and in-plane electric and magnetic loadings is investigated considering the magneto-electro-mechanical nonlinearity. It is assumed that the constant moving crack is magneto-electrically permeable and the length of the crack keeps constant. Fourier transform is applied to reduce the mixed boundary value problem of the crack to dual integral equations, which are solved exactly. The explicit expression of the size of the yield zone is derived, and the crack sliding displacement (CSD) is explicitly expressed. The result shows that the stress, electric and magnetic fields in the cracked magnetoelectroelastic material are no longer singular and the CSD is dependent on the loading, material properties and crack moving velocity. The current model can be reduced to the static interfacial crack case when the crack moving velocity is zero.     

Transient response of a piezoelectric material with a semi-infinite mode-III crack under impact loads

The problem of a semi-infinite impermeable mode-III crack in a piezoelectric material is considered under the action of impact loads. For the case when a pair of concentrated anti-plane impact loads and electric displacements are exerted symmetrically on the upper and lower surfaces of the crack, the asymptotic electroelastic field ahead of the crack tip is determined in explicit form. The dynamic intensity factors of electroelastic field and dynamic mechanical strain energy release rate are obtained. The obtained results can be taken as fundamental solutions, from which general results may directly be evaluated by integration. The method adopted is to reduce the mixed initial-boundary value problem, by using the Laplace and Fourier transforms, into two simultaneous dual integral equations. One may be converted into an Abel's integral equation and the other into a singular integral equation with Cauchy kernel, and the solutions of both equations can be determined in closed-form, respectively. For some particular cases, the present results reduce to the previous results.     

The central crack problem for a functionally graded piezoelectric strip

In this paper the dynamic anti-plane problem for a functionally graded piezoelectric strip containing a central crack vertical to the boundary is considered. The crack is assumed to be electrically impermeable or permeable. Integral transforms and dislocation density functions are employed to reduce the problem to Cauchy singular integral equations. Numerical results show the effects of loading combination parameter, material gradient parameter and crack configuration on the dynamic response. With the permeable assumption, the electric impact has no contribution to the crack tip field singularity. With the impermeable assumption, the direction of applied electric impact loading plays a great role in the behavior of dynamic stress intensity factor, and the existence of electric load always enhances the crack propagation. However, the crack is easier to propagate under the negative electric load than that under the positive electric load.     

Modeling method for the crack problem of a functionally graded interfacial zone with arbitrary material properties

A new multi-layered model is developed for the fracture analysis of a functionally graded interfacial zone with arbitrary material properties. It is assumed that the interfacial zone is divided into sub-layers with the material properties of each sub-layer varying in a power-law function. The model is used to study the crack problem in the functionally graded interfacial zone between two homogeneous half-planes under a dynamic anti-plane load. Using Fourier–Laplace transforms and the transfer matrix method, the mixed boundary value problem is reduced to a Cauchy singular integral equation, which is solved numerically in the Laplace transform domain. Laplace numerical inversion transform is employed to obtain the stress intensity factors. The results show that the new model is general and effective for the crack problem of the functionally graded interfacial zone with arbitrary properties.     

Impact response of an anti-plane crack in a FGPM bonded to a homogeneous piezoelectric strip

A finite crack under transient anti-plane shear loads in a functionally graded piezoelectric material (FGPM) bonded to a homogeneous piezoelectric strip is considered. It is assumed that the electroelastic material properties of the FGPM vary continuously according to exponential functions along the thickness of the strip, and that the two layered strips is under combined anti-plane shear mechanical and in-plane electrical impact loads. The analysis is conducted on the electrically unified crack boundary condition. Laplace and Fourier transforms are used to reduce the mixed boundary value problems to Fredholm integral equations of the second kind in the Laplace transform domain. Then, a numerical Laplace inversion is performed and the dynamic intensities are obtained as functions of time and geometric parameters, which are displayed graphically.     

Transient analysis of multiple parallel cracks under anti-plane dynamic loading

The problem of a homogeneous linear elastic body containing multiple non-collinear cracks under anti-plane dynamic loading is considered in this work. The cracks are simulated by distributions of dislocations and an integral equation relating tractions on the crack planes and the dislocation densities is derived. The integral equation in the Laplace transform domain is solved by the Gaussian–Chebyshev integration quadrature. The dynamic stress intensity factor associated with each crack tip is calculated by a numerical inverse Laplace scheme. Numerical results are given for one crack and two or three parallel cracks under normal incidence of a plane horizontally shear stress wave.     

有限高磁电弹性体中双半动态与静态裂纹分析

狭长体中的裂纹是断裂力学中经常采用的研究模型。含有共线无限长裂纹的条形磁电弹性体,当面内的力电磁和反平面的剪应力作用在左边裂纹尖端附近的一段裂纹面上时,往往会产生动态断裂。利用复变函数法中的拱形变换公式,导出了磁电全非渗透型边界条件下左裂纹尖端动态的应力强度因子以及机械应变能释放率的解析解。当运动速度趋于零时退化为静止状态下的解。通过数值算例分析了断裂机理,讨论了静止状态下狭长体和裂纹的几何尺寸、外力、电场和磁场分别对能量释放率的影响,为相关器件的设计与制造提供了帮助。     

Periodically distributed parallel cracks in a functionally graded piezoelectric (FGP) strip bonded to a FGP substrate under static electromechanical load

In this paper, the Fourier integral transform–singular integral equation method is presented for the problem of a periodic array of cracks in a functionally graded piezoelectric strip bonded to a different functionally graded piezoelectric material. The properties of two materials, such as elastic modulus, piezoelectric constant and dielectric constant, are assumed in exponential forms and vary along the crack direction. The crack surface condition is assumed to be electrically impermeable or permeable. The mixed boundary value problem is reduced to a singular integral equation over crack by applying the Fourier transform and the singular integral equation is solved numerically by using the Lobatto–Chebyshev integration technique. The analytic expressions of the stress intensity factors and the electric displacement intensity factors are derived. The effects of the loading parameter λ, material constants and the geometry parameters on the stress intensity factor, the energy release ratio and the energy density factor are studied.     

Transient anti-plane crack problem of a functionally graded piezoelectric strip bonded to elastic layers

Summary. This paper examined the dynamic electromechanical behavior of a crack in a functionally graded piezoelectric layer bonded between two elastic layers under the combined anti-plane mechanical shear and in-plane electric impacts. Fourier cosine transforms are used to reduce the problem to the solution of a set of singular integral equations. It is found that the impermeable crack condition is more reasonable than the permeable crack condition to analyze the influence of electric loading, and the energy density factor is more acceptable than the energy release rate to be used as the fracture criterion. In addition, numerical results are also presented to show the influences of the crack position, electromechanical combination factor and material gradient parameter on the fracture behavior.     

Dynamic Stress Intensity Factor of Interfacial Finite Cracks in Orthotropic Materials

The elastodynamic response of an infinite non-homogeneous orthotropic material with an interfacial finite crack under distributed normal and shear impact loads is examined. Solution for the stress intensity factor history around the crack tips is found. Laplace and Fourier transforms are employed to solve the equations of motion leading to a Fredholm integral equation on the Laplace transform domain. The dynamic stress intensity factor history can be computed by numerical Laplace transform inversion of the solution of the Fredholm equation. Numerical values of the dynamic stress intensity factor history for some materials are obtained. Interfacial cracks between two different materials and between two pieces of the same material but different fiber orientation are considered. Bimaterial formulation of a crack problem is shown to converge to the mono-material formulation, derived independently, in the limiting case when both materials are the same.     

Dynamic stress intensity factor (Mode I) of a penny-shaped crack in an infinite poroelastic solid

This paper considers the transient stress intensity factor (Mode I) of a penny-shaped crack in an infinite poroelastic solid. The crack surfaces are impermeable. By virtue of the integral transform methods, the poroelastodynamic mixed boundary value problems is formulated as a set of dual integral equations, which, in turn, are reduced to a Fredholm integral equation of the second kind in the Laplace transform domain. Time domain solutions are obtained by inverting Laplace domain solutions using a numerical scheme. A parametric study is presented to illustrate the influence of poroelastic material parameters on the transient stress intensity. The results obtained reveal that the dynamic stress intensity factor of poroelastic medium is smaller than that of elastic medium and the poroelastic medium with a small value of the potential of diffusivity shows higher value of the dynamic stress intensity factor.     

The transient response of bonded piezoelectric and elastic half space with multiple interfacial collinear cracks

Summary This paper investigates the dynamic behavior of a bonded piezoelectric and elastic half space containing multiple interfacial collinear cracks subjected to transient electro-mechanical loads. Both the permeable and impermeable boundary conditions are examined and discussed. Based on the use of integral transform techniques, the problem is reduced to a set of singular integral equations, which can be solved using Chebyshev polynomial expansions. Numerical results are provided to show the effect of the geometry of interacting collinear cracks, the applied electric fields, and the electric boundary conditions along the crack faces on the resulting dynamic stress intensity and electric displacement intensity factors.