Simple sheath flow reactor for post-column fluorescence derivatization in capillary electrophoresis

A system for post-column fluorescence derivatization in capillary electrophoresis is described. The post-column reactor uses a sheath flow detection cell where the reagents, o-phthaldialdehyde and beta-mercaptoethanol, are added to the sheath buffer and mix by diffusion with the analytes effusing from the separation capillary. Reaction progress is monitored and optimized by imaging a large portion of the sheath flow cuvette using an extended UV source and a CCD camera. Significantly, this design provides the ability to switch between the analysis of pre- and post-column derivatized amino acids and peptides easily and without sacrificing system performance. The lack of turbulent flow in this system minimizes post-separation band broadening. The limit of detection for glycine is 9.4 x 10(-8) M (110 amol) with a separation efficiency of 190,000 theoretical plates, without stacking. The performance of the system for a series of amino acids was evaluated using post-column and pre-capillary derivatization.     

Fluorescence detection of proteins and amino acids in capillary electrophoresis using a post-column sheath flow reactor

A simple laser-induced fluorescence detection method for proteins and amino acids in capillary electrophoresis is reported. A sheath flow cell is utilized as a post-column reactor for fluorescence derivatization of proteins and amino acids by addition of o-phthaldialdehyde-2-mercaptoethanol to the sheath fluid. With the use of a 50 microns I.D. capillary, the limits of detection for carbonic anhydrase are 0.73 nM or 1.8 amol which represents a five- and two-fold improvement, respectively, over the best results previously reported for post-column detection. In addition, separation efficiencies up to 8.07 x 10(5) are achieved and the detector response is linear over three-orders of magnitude. These results demonstrate that mixing is adequate and the reaction kinetics are rapid enough to provide sensitive detection with this approach. Also, because this post-column derivatization scheme requires no instrumental changes to a typical sheath flow cell detector, the system can be used for detection of pre-column labeled analytes and for native fluorescence detection.     

Chemiluminescence detection in capillary electrophoresis

Capillary electrophoresis (CE) and related techniques yield highly efficient separations while requiring only minute amounts of sample. Thus, these techniques are amenable to analyses of complex samples in diverse matrices and in situations where sample is extremely limited. The constraints of on-column detection generally result in poor detection limits and have reduced the overall application of CE. One logical approach to increased sensitivity in CE detection has been the development of chemiluminescence (CL)-based detectors. The current state of post-column detector development, CL applications, and limitations of the technique are reported herein.     

Application of capillary electrophoresis and related techniques to drug metabolism studies

The use of capillary electrophoresis (CE) for the separation of small organic molecules such as pharmaceutical agents and drug/xenobiotic metabolites has become increasingly popular. This has arisen, at least in part, from the complimentary mode of separation afforded by CE when compared to the more mature technique of HPLC. Other qualities of CE include relative ease of method of development, rapid analysis, and low solvent consumption. The recent introduction of a variety of detector systems (including UV diode array, laser-induced fluorescence, conductivity) and the demonstrated coupling of CE to MS have also aided acceptance of this technology. In the present report, we review the role of CE coupled to various detector systems including a mass spectrometer for the characterization of both in vitro and in vivo derived drug metabolite mixtures. Attributes of CE for this application are demonstrated by discussion of metabolism studies of the neuroleptic agent haloperidol. Various aspects of the development and use of CE and CE-MS for the characterization of haloperidol metabolites, including criteria for selection of parameters such as pH, ionic strength, extent of organic modification, and the use of nonaqueous capillary zone electrophoresis are discussed. We also consider potential limitations of CE and CE-MS for drug metabolism research and describe the introduction of membrane preconcentration-CE (mPC-CE) and mPC-CE-MS as a solution that overcomes the rather poor concentration limits of detection of CE methods without compromising the resolution of analytes or separation efficiency of this technique.     

Activity-dependent changes in voltage-dependent calcium currents and transmitter release

The use of capillary electrophoresis (CE) for clinically relevant assays is attractive since it often presents many advantages over contemporary methods. The small-diameter tubing that holds the separation medium has led to the development of multicapillary instruments, and simultaneous sample analysis. Furthermore, CE is compatible with a wide range of detectors, including UV-Vis, fluorescence, laser-induced fluorescence, electrochemistry, mass spectrometry, radiometric, and more recently nuclear magnetic resonance, and laser-induced circular dichroism systems. Selection of an appropriate detector can yield highly specific analyte detection with good mass sensitivity. Another attractive feature of CE is the low consumption of sample and reagents. However, it is paradoxical that this advantage also leads to severe limitation, namely poor concentration sensitivity. Often high analyte concentrations are required in order to have injection of sufficient material for detection. In this regard, a series of devices that are broadly termed 'analyte concentrators' have been developed for analyte preconcentration on-line with the CE capillary. These devices have been used primarily for non-specific analyte preconcentration using packing material of the C18 type. Alternatively, the use of very specific antibody-containing cartridges and enzyme-immobilized microreactors have been demonstrated. In the current report, we review the likely impact of the technology of capillary electrophoresis and the role of the CE analyte concentrator-microreactor on the analysis of biomolecules, present on complex matrices, in a clinical laboratory. Specific examples of the direct analysis of physiologically-derived fluids and microdialysates are presented, and a personal view of the future of CE in the clinical environment is given.     

Ultrasensitive detection of closely related angiotensin I peptides using capillary electrophoresis with near-infrared laser-induced fluorescence detection

A novel near-infrared (NIR) fluorescent dye (NN382, LICOR, Inc.) was evaluated as an ultrasensitive peptide-labeling reagent for use with capillary electrophoresis (CE). Six angiotensin I (Ang-I) variants were selected as model peptides for the derivatization and separation studies. The closely related decapeptides were labeled with the NIR dye, separated using CE, and detected by NIR laser-induced fluorescence. Derivatization of the peptides was achieved under aqueous conditions using 2.5-500 pmol of Ang-I in a 50-microL sample (5 x 10(-8)-1 x 10(-5)M), and between 1.3 and 254 amol of the labeled peptides were injected on column. The fluorescence response was linear over a 200-fold range (correlation r > or = 0.9986). The limit of detection (SNR = 3, signal/RMS noise) ranged from 100 to 300 zmol, for the six Ang-I variants. Four of six peptides were resolved from each other and excess dye using capillary zone electrophoresis with a simple 50 mM phosphate run buffer, pH 7.2. Two pairs of coeluting peptides were successfully resolved using micellar electrokinetic chromatography with a nonionic surfactant, Triton X-100. The NIR amine-labeling reagent NN382 is a viable alternative to using visible fluorophores for CE methods requiring high sensitivity.     

Capillary electrophoresis with laser-induced fluorescence: a routine method to determine moxifloxacin in human body fluids in very small sample volumes

Methods for the simultaneous determination of methamphetamine (MP) and its related compounds (MPs) using capillary electrophoresis (CE) with UV absorbance and laser-induced fluorescence (LIF) detection are described. In UV detection, MPs were applied to CE without any derivatization procedure and detected at 210 nm for a rapid and simple analysis. Capillary zone electrophoresis (CZE) and electrokinetic capillary electrophoresis (MEKC) were used. MP, amphetamine (AP), 1-phenylethylamine (1-PA as an I.S.), 2-phenylethylamine (2-PA), 4-hydroxymethamphetamine (4-HMP) and 4-hydroxyamphetamine (4-HAP) were separated within 15 min by both CZE and MEKC. Detection limits of MPs were in the range 48-72 fmol/injection for CZE and 85-191 fmol/injection for MEKC. MEKC was successfully applied to the determination of MPs in urine. For a highly sensitive analysis, LIF detection was also examined using 4-fluoro-7-nitro-2,1,3-benzoxadiazole (NBD-F) as a fluorescent derivatization reagent. By the method, in which MPs derivatives were separated within 45 min by MEKC, 22-40 amol/injection of primary amines (AP, 4-HAP and 2-PA) and 690 amol/injection of MP and 300 amol/injection of 4-HMP were detected. The concentration of MP and AP in 50 microliters urine from MP addicts were successfully determined. A comparison of the characteristics for both UV and LIF detections was also discussed.     

Recent developments in capillary electrophoresis of carbohydrate species

Pesticides are important and diverse environmental and agricultural species. Their determination in pesticide formulations, in feed and food, and in complex environmental matrices (e.g., water, soil, sludge, sediments, etc.) often requires separation methods of high efficiency, unique selectivity and high sensitivity. As shown in this comprehensive review, capillary electrophoresis meets these requirements and has proved to be a suitable microseparation technique for the analysis of a wide variety of chiral and achiral pesticides. It is also shown that by combining selective precolumn derivatization schemes, sensitive detection methods (e.g., laser induced fluorescence detection) and trace enrichment techniques, capillary electrophoresis (CE) is capable of determining pesticides at trace levels as those usually encountered in environmental samples.     

An oxazine reagent for derivatization of carboxylic acid analytes suitable for liquid chromatographic detection using visible diode laser-induced fluorescence

This study reports the use of Nile Blue, an oxazine dye, as a derivatization reagent that fluoresces in the far-red spectral region and is suitable for derivatization with carboxylic-acid-containing analytes. Model carboxylic acid analytes such as benzoic acid, acetic acid, phenylacetic acid and hexanoic acid have been reacted as acid chlorides to form Nile Blue derivatives. The synthesis product of the Nile Blue benzoic acid derivative was confirmed using electrospray-mass spectrometry, infrared spectrometry, 1H and 13C nuclear magnetic resonance, reversed phase liquid chromatography (RP-HPLC), normal phase-thin layer chromatography, and spectral characterization. The synthesized Nile Blue derivatives, separated from reaction by-products with RP-HPLC, all demonstrated an approximately 10-fold drop in molar absorptivity and relative quantum yield. In addition, a 40 nm increase in Stokes shift was observed. A portion of the fluorescence was regained through post-column ionization of the Nile Blue benzoic acid derivative at pH 12. A RP-HPLC limit of detection of 88.25 fmol on column has been reported with conventional fluorescence detection-post-column ionization of the Nile Blue benzoic acid derivative. A limit of detection of 1.99 fmol on column (3.98 x 10(-11) M) has been demonstrated for the Nile Blue benzoic acid derivative with the use of a laboratory-constructed visible diode laser fluorescence detector.     

Isolation and expression of a mouse CB1 cannabinoid receptor gene. Comparison of binding properties with those of native CB1 receptors in mouse brain and N18TG2 neuroblastoma cells

The chiral separation of enantiomeric forms of derivatized amino acids have been achieved based on a metalchelate chiral capillary electrophoretic method and a cyclodextrin mediated host-guest interaction approach in micellar electrokinetic chromatography (MEKC) mode with laser-induced fluorescence detection. This approach has been applied to the determination of enantiomeric forms of amino acids derived from novel depsipeptide antitumor antibiotics, BMY-45012 and its analogs. Amino acids were analyzed by complete hydrolysis and the hydrolysate was derivatized with either dansyl chloride for UV absorbance detection or fluorescein isothiocyanate for laser based fluorescence detection. The presence of several amino acids, serine and beta-hydroxyl-N-methy-valine in the proposed structure have been confirmed as D-serine and L-beta-hydroxyl-N-methy-valine enantiomeric forms by both chiral capillary electrophoresis (chiral CE) and MEKC approaches. A non-chiral amino acid, sarcosine, was also confirmed. These methodologies provide a quick and sensitive approach for the determination of amino acids racemization of pharmaceutical natural products and have proven to be useful for structural elucidation refinement.     

1,2-Diarylethylenediamines as sensitive pre-column derivatizing reagents for chemiluminescence detection of catecholamines in HPLC

Chemiluminescence detection in high-performance liquid chromatography for derivatives of catecholamines (norepinephrine, epinephrine and dopamine) and isoproterenol was studied on the basis of the peroxyoxalate chemiluminescence reaction. The amines and isoproterenol, derivatized with 1,2-diarylethylenediamines, were separated on a reversed-phase HPLC column (TSK gel ODS-120T) with isocratic elution using a mixture of imidazole buffer (pH 5.8, 120 mM)-methanol-acetonitrile (6:2:9, v/v/v). The eluate was detected by a post-column chemiluminescence reaction system, using bis[4-nitro-2-(3,6,9-trioxadecyloxycarbonyl)phenyl]oxalate and hydrogen peroxide. Of the 141,2-diarylethylenediamines investigated, it was found that 1,2-bis(3-chlorophenyl)ethylenediamine, 1,2-bis(3,4-dichlorophenyl)-ethylenediamine and 1,2-bis(4-chlorophyenyl)ethylenediamine were the most sensitive derivatives for all catecholamines. The derivatization and peroxyoxalate chemiluminescence reaction conditions were optimized for 1,2-bis(3-chlorophenyl)-ethylenediamine. The chromatographic detection limits for catecholamines were approximately 40-120 amol for an injection volume of 100 microliters (signal-to-noise ratio of 3).     

Determination of illicit and/or abused drugs and compounds of forensic interest in biosamples by capillary electrophoretic/electrokinetic methods

The application of capillary electrophoresis (CE) methods in forensic toxicology for the determination of illicit and/or misused drugs in biological samples is reviewed in the present paper. Sample pretreatments and direct injection modes used in CE for analysis of drugs in biological fluids are briefly described. Besides, applications of separation methods based on capillary zone electrophoresis or micellar electrokinetic chromatography with UV absorbance detection to (i) analysis of drugs of abuse, (ii) analysis of other drugs and toxicants of potential forensic interest and (iii) for metabolism studies are reviewed. Also, alternative CE methods are briefly discussed, including capillary isotachophoresis and separation on mixed polymer networks. High sensitivity detection methods used for forensic drug analysis in biological samples are then presented, particularly those based on laser induced fluorescence. A glimpse of the first examples of application of CE-mass spectrometry in forensic toxicology is finally given.     

Single strand conformational polymorphism using capillary electrophoresis with two-dye laser-induced fluorescence detection

Capillary electrophoresis (CE), using a replaceable polymer matrix and two-dye laser-induced fluorescence has been applied to single strand conformational polymorphism (SSCP). Two-dye laser-induced fluorescence has been used for improved strand identification over a single-dye approach. Conditions suitable in the capillary format for rapid separation and high resolution have been explored. The influence of separation parameters such as temperature and matrix composition on separation in SSCP was first determined. Short analysis times allowed for fast screening of optimal separation conditions of the sample. Based on these results, the two strands of a standard 255 bp fragment of the lacI gene were resolved within 25 min with replaceable linear polyacrylamide as a separation matrix. The method was then applied to the detection of different mutations, in the presence of wild type, of a 276 bp fragment of the insulin-like growth factor 1-binding protein 1 (IGF1-BP3) gene.     

Analysis of peptides, proteins, protein digests, and whole human blood by capillary electrophoresis/electrospray ionization-mass spectrometry using an in-capillary electrode sheathless interface

An in-capillary electrode sheathless interface was applied to the capillary electrophoresis/electrospray ionization-mass spectrometry (CE/ESI-MS) analysis of mixtures of small peptides, proteins, and tryptic digests of proteins. The effects of different experimental parameters on the performance of this CE/ESI-MS interface were studied. The distance of the in-capillary electrode from the CE outlet and the length of the electrode inside the capillary had no significant effects on the CE separation and ESI behavior under the experimental conditions used. However, significant enhancement of the sensitivity resulted from the use of narrower CE capillaries. Using a quadrupole mass spectrometer, an aminopropylsilane-coated capillary, and a wide scan mass-to-charge ratio range of 500-1400, detection limits of approximately 4, 1, and 0.6 fmol for cytochrome c and myoglobin were achieved for 75-, 50-, and 30-micron inner diameter capillaries, respectively. Approximately one order of magnitude lower detection limits were achieved under the multiple-ion monitoring mode. The application of the in-capillary electrode sheathless interface to real-world samples was demonstrated by CE/ESI-MS analysis of a human blood sample.     

Strategies for capillary electrophoresis: method development and validation for pharmaceutical and biological applications

This review is in support of the development of selective, reproducible and validated capillary electrophoretis (CE) methods. Focusing on pharmaceutical and biological applications, the successful use of CE is demonstrated by more than 800 references, mainly from 1994 until 1998. Approximately 80 recent reviews have been catalogued. These articles sum up the existing strategies for method development in CE, especially in the search for generally accepted concepts, but also looking for new, promising reagents and ideas. General strategies for method development were derived not only with regard to selectivity and efficiency, but also with regard to precision, short analysis time, limit of detection, sample pretreatment requirements and validation. Standard buffer recipes, surfactants used in micellar electrokinetic capillary chromatography (MEKC), chiral selectors, useful buffer additives, polymeric separation media, electroosmotic flow (EOF) modifiers, dynamic and permanent coatings, actions to deal with complex matrices and aspects of validation are collected in 20 tables. Detailed schemes for the development of MEKC methods and chiral separations, for optimizing separation efficiency, means of troubleshooting, and other important information for key decisions during method development are given in 19 diagrams. Method development for peptide and protein separations, possibilities to influence the EOF and how to stabilize it, as well as indirect detection are considered in special sections.     

Delta-Aminolevulinic acid in urine (screening method)

Various methods for determining urinary delta-aminolevulinic acid (ALA) have been devised by many investigators since 1956. This paper introduces a history of the methodology in the determination of urinary ALA and application of some methods. These methods can be divided into two groups; one group consists of colorimetric methods based on the color reaction of ALA-pyrrole with Ehrlich's reagent, and the other group consists of fluorometric methods, based on the fluorescence derivatization of ALA and its separation by HPLC. Colorimetric methods are convenient and inexpensive, while these are less specific. On the other hand, the fluorometric HPLC methods are highly sensitive and specific, while these are expensive because of the high cost of the instruments.     

A novel buffer system for separation of metal cations by capillary electrophoresis with indirect UV detection

Generally, the buffers used for metal ion separations in capillary electrophoresis (CE) consist of a UV-active substance, pH-adjuster, and weak complexing reagent. This paper describes the successful separation of metal ions with a new buffer that contains no complexing reagent. Of several weakly basic compounds tested, 2-aminopyridine was selected as the most useful UV-active substance. It was used at a concentration of 15 mM with pH adjusted to 5.0 +/- 0.1 by acetic acid. The degree of protonation of the UV-active substance played an important role in detection. The stacking phenomenon was a significant contributor to efficiency in this buffer system, and water-diluted samples gave especially high efficiencies. When a 75-micron-i.d. fused-silica capillary was used, a separation efficiency of 1.8 x 10(5) was observed. Quantitative determinations of Ca2+, Mn2+, Zn2+, and Cd2+ were achieved with good linear calibration curves over the range of concentration from a few milligrams per liter to 100 mg/L. The detection limits were 0.2 mg/L for Ca2+, 0.4 mg/L for Mn2+ and Zn2+, and 0.6 mg/L for Cd2+, based on three times the baseline noise.     

Determination of submicromolar concentrations of neurotransmitter amino acids by fluorescence detection using a modification of the 6-aminoquinolyl-N-hydroxysuccinimidyl carbamate method for amino acid analysis

A sensitive method for quantitatively determining submicromolar levels of neurotransmitter amino acids (e.g. Asp, Glu and gamma-aminobutyric acid) in microdialysates from brain and cerebrospinal fluids is reported. 6-Aminoquinolyl-N-hydroxy-succinimidyl carbamate (AQC) was employed as the derivatization reagent, followed by HPLC separation and fluorescence detection of the derivatives. The derivatization was conducted simply by mixing the AQC directly with the microdialysis samples. The reaction was complete within seconds after mixing at room temperature. Separation development optimizing the gradient profile, eluent pH and column temperature resulted in an excellent separation of the required amino acids in less than 30 min. Other resolved amino acids in the same profile include Gly, taurine, and Pro. Recoveries for the amino acids of interest spiked into high salt containing perfusion buffers were greater than 97%. The sensitivity of the method was increased by employing a 16-microliter flow cell in the detector and analyzing 20-microliter aliquots of the derivatization mixtures. With the optimized conditions, the detection limits were 3-7 nM (fmol/microliter). Typical reproducibility (%R.S.D.) for quantitation of these amino acids at submicromolar levels was approximately 2%. Excellent linearity (r2 > 0.999) was achieved over the range 0.2-20 microM. The low detection limits permitted the analysis of a number of different microdialysate samples including those from cerebrospinal fluid, as well as substantia nigra and hypothalamus from brain samples, even at basal levels where gamma-aminobutyric acid concentration may be < 50 nM. The excellent sensitivity made it easy to distinguish basal from stimulated levels of neurotransmitter amino acids, even from sample sizes as small as 10 microliters.     

A simplified high-performance liquid chromatographic method for direct determination of warfarin enantiomers and their protein binding in stroke patients

A simplified method for direct determination of warfarin enantiomers by high-pressure liquid chromatography with fluorescence detection has been developed. This method involves solid phase extraction of warfarin in plasma, precolumn derivatization to form diastereoisomeric esters, and post-column reaction to discriminate each enantiomer separately. Ultrafiltration was employed in the separation of unbound warfarin enantiomers. Twelve plasma samples from six stroke patients taking warfarin regularly were analyzed. The average concentration of total warfarin was 0.47 +/- 0.17 mg/L for the S-isomer and 0.69 +/- 0.18 mg/L for the R-isomer. The average protein binding was 99.67 +/- 0.33% for S-warfarin and 99.44 +/- 0.33% for R-warfarin. This methodology provides a quick and reliable technique for determining enantiomeric protein binding of warfarin in clinical settings.