共查询到20条相似文献,搜索用时 46 毫秒
1.
一、概述:2004年11月,武船“机制分厂信息化建设工程”项目成功上线。该项目包含CAPP(计算机辅助工艺设计)/PDM(产品数据库管理)和ERP(企业资源计划)。其中ERP包括15个子系统,覆盖了企业的各项业务管理,在数据库共享信息平台上,实现了机制分厂物流、资金流、信息流的一体化管理。通过ERP系统的实施,促进了机制分厂管理流程更加规范,结构更加合理,管理数据更加透明。 相似文献
2.
基于SOA架构的PDM系统与制造管理系统集成设计与实现 总被引:1,自引:0,他引:1
针对大型装备制造企业单件定制、边设计边变更、老系统众多的特点,分析了产品数据管理系统(PDM)与制造管理系统集成的业务场景,提出了一种基于面向服务架构(SOA)的信息集成方法,有效地满足了装备制造企业数据量大、及时性高以及集成系统多的集成要求。针对装备制造企业支撑产品设计管理最主要的PDM系统和下游生产管理系统的集成要求,给出了完整的设计方案和系统实现,并描述了具体应用效果。 相似文献
3.
PDM是CAD/CAPP/CAM的集成平台.本文在集成分析的基础上论述了3种集成模式,并对PDM的网络化发展进行了展望. 相似文献
4.
5.
6.
通过对钢铁加工配送行业ERP(企业资源计划)项目的设计和分析,从该行业的外部环境和内部环境入手,分析企业进行ERP实施的必要性;同时对钢铁加工配送行业典型业务流程进行分析,并对原料分配模型等关键技术进行了设计和分析.相应的解决方法经实际验证是可行的,并能有效的提高企业的管理水平和市场应变能力. 相似文献
7.
8.
9.
文章分析了制造企业的特点,阐述制造企业实施CRM系统的必要性和可行性,初步探讨制造企业的CRM体系结构和系统所需的功能,同时提出企业将CRM系统与ERP系统集成起来使信息在企业内部各部门之间流畅地传递,提高企业的运作效率,这也是企业信息化发展的必然趋势。 相似文献
10.
11.
研究并对比了Ti/Al/Ni/Au和Ti/Al/Pt/Au多层金属膜与未掺杂的Al0 .2 2 Ga0 .78N/GaN(i AlGaN/GaN)异质结构之间的欧姆接触性质。在退火温度低于 70 0℃时 ,两种接触样品上都不能得到欧姆接触。随着退火温度的升高 ,85 0℃快速退火后 ,在Ti/Al/Ni/Au接触上获得了 1.2 6×10 - 6 Ω·cm2 的比接触电阻率 ,在Ti/Al/Pt/Au接触上获得了 1.97× 10 - 5Ω·cm2 的比接触电阻率。研究结果表明 ,金属与半导体接触界面和Al0 .2 2 Ga0 .78N异质结构界面载流子沟道之间适当的势垒的存在对高质量欧姆接触的形成起重要作用 ,势垒的宽度取决于退火温度以及退火的具体进程。对Ti/Al/Ni/Au和Ti/Al/Pt/Au欧姆接触比接触电阻率的差异进行了解释。 相似文献
12.
The research investigated the effect of doping two metals separately or together into Ce0.5Zr0.5O2 on the catalytic activity of MnOx/Ce0.5-xZr0.5-xM0.2xOy/Al2O3 (M=Y, Mn, Y and Mn) for catalytic combustion of benzene. The prepared catalysts were characterized by X-ray diffraction (XRD), surface area analysis, oxygen storage capacity (OSC), and H2-temperature programmed reduction (H2-TPR). Catalytic test was performed on a conventional fixed bed flow reactor. The characterization results revealed that Y and Mn ions entered into the ceria-zirconia mixed oxides framework, which improved the textural properties and greatly promoted the MnOx dispersion on the support surface. The complete conversion temperature of benzene on MnOx/Ce0.4Zr0.4Y0.1Mn0.1Oy/Al2O3 was 563 K, and the selectivity of carbon dioxides was 99%. This catalyst could be applied in a wide range of GHSV and wide concentration condition, showing great potential for application. 相似文献
13.
YBa2Cu4O8/La2/3 Ca1/3 MnO3/YBa2Cu4O8 ( Y-124/LCMO/Y- 124) heterostructure was prepared by facing-target sputtering technique. The oscillatory superconducting transition temperature was observed when the thickness of LCMO d L is larger than critical thickness d L^CR. The metal-insulator transition temperature can only be detected at d L 〉 d L^CR. The dependence on the spacer layer in LCMO/Y-124 systems suggests strongly the interplay of ferromagnetic and superconducting couplings. 相似文献
14.
采用热压烧结制备了Li3/8Sr7/16Ta3/4Hf1/4O3钙钛矿型固体电解质, 研究了不同烧结方式对样品性能的影响。通过X射线衍射仪表征材料的晶体结构, 扫描电子显微镜观察组织形貌, 交流阻抗仪测试电化学性能。结果表明:样品为立方KTaO3相, 热压烧结成功合成了钙钛矿结构固体电解质, 相对于常压烧结, 热压烧结制备的样品孔隙更少, 晶粒之间结合更加紧密, 致密度高达94.0%, 离子电导率为4.33×10-4S·cm(T=298K). 相似文献
15.
采用共沉淀-高温固相法制备LiNi1/3Mn1/3Co1/3O2正极材料,利用XRD和SEM对所制试样的晶体结构和形貌进行表征,研究了烧结温度对材料电化学性能的影响.结果表明,焙烧温度为850 ℃制备的材料具有较好电化学性能,在25 ℃,电压范围为2.75~4.2 V,1 C充电6 C放电下首次放电比容量为124.2 mAh/g,50次循环后容量保持率为95.2 %. 相似文献
16.
La2/3 Sr1/3 Mn1-x ZnxO3films (x =0.05, 0.1,0.3, and 0.5) were prepared using magnetron sputtering method, and the effect of Zn doping on transport properties of the films was studied. An analysis of X-ray diffraction showed that the main phase of the bulk target was orthorhombic and the films had better epitaxial character. It was found that the films with x =0.05 and x =0.1 exhibited typical insulator-metal transition. No transition of the films with x≥0.3 was observed and the dominant transport was variable-range hopping due to observable secondary phase ZnO. These could be attributed to the Zn doping effect on manganites. 相似文献
17.
固相烧结法合成钙钛矿型Li3/8Sr7/16Ta3/4Hf1/4O3(LSTH) 固体电解质材料,制备过程中分别加入过量的碳酸锂,质量分数分别为(0~30 %).通过XRD、SEM、ICP-OES以及EIS测试,表征不同锂过量LSTH固体电解质材料成相、显微形貌以及室温电导率的影响.实验结果表明,配料时,过量一定质量百分数的碳酸锂,能够有效减少烧结过程中因锂挥发而生成的SrTa2O6杂相,提高样品密度和室温电导率.样品最佳锂过量质量百分数为20 %,20 %锂过量样品1 300 ℃烧结10 h为钙钛矿纯相,密度6.5 g/cm3,室温电导率达到3.12×10-4 S/cm. 相似文献
18.
介绍了比容量高、循环性能优异、成本较低的LiNil/3Co1/3Mnl/3O2正极材料近年来在合成技术及其掺杂改性、表面修饰等方面所取得的成果和进展,并对其未来的发展趋势进行了展望。 相似文献
19.
Antigenic drift between the haemagglutinin of the Hong Kong influenza strains A/Aichi/2/68 and A/Victoria/3/75 总被引:3,自引:0,他引:3
M Verhoeyen R Fang WM Jou R Devos D Huylebroeck E Saman W Fiers 《Canadian Metallurgical Quarterly》1980,286(5775):771-776
A DNA copy of the gene coding for the influenza A/Aichi/2/68 haemagglutinin protein was cloned in the plasmid pBR322 and the complete nucleotide sequence determined. Comparison of this primary structure and the deduced amino acid sequence with the haemagglutinin gene and protein of strains belonging to the same (H3) subtype and to different subtypes, of both human (H2) and avian (Hav1) origin, documents further at the molecular level the two independent modes of antigenic variation of the virus--drift and shift. 相似文献
20.