The sensitivity of human mesenchymal stem cells to vibration and cold storage conditions representative of cold transportation

In the current study, the mechanical and hypothermic damage induced by vibration and cold storage on human mesenchymal stem cells (hMSCs) stored at 2–8°C was quantified by measuring the total cell number and cell viability after exposure to vibration at 50 Hz (peak acceleration 140 m s⁻² and peak displacement 1.4 mm), 25 Hz (peak acceleration 140 m s⁻², peak displacement 5.7 mm), 10 Hz (peak acceleration 20 m s⁻², peak displacement 5.1 mm) and cold storage for several durations. To quantify the viability of the cells, in addition to the trypan blue exclusion method, the combination of annexin V-FITC and propidium iodide was applied to understand the mode of cell death. Cell granularity and a panel of cell surface markers for stemness, including CD29, CD44, CD105 and CD166, were also evaluated for each condition. It was found that hMSCs were sensitive to vibration at 25 Hz, with moderate effects at 50 Hz and no effects at 10 Hz. Vibration at 25 Hz also increased CD29 and CD44 expression. The study further showed that cold storage alone caused a decrease in cell viability, especially after 48 h, and also increased CD29 and CD44 and attenuated CD105 expressions. Cell death would most likely be the consequence of membrane rupture, owing to necrosis induced by cold storage. The sensitivity of cells to different vibrations within the mechanical system is due to a combined effect of displacement and acceleration, and hMSCs with a longer cold storage duration were more susceptible to vibration damage, indicating a coupling between the effects of vibration and cold storage.     

The effect of remodelling and contractility of the actin cytoskeleton on the shear resistance of single cells: a computational and experimental investigation

The biomechanisms that govern the response of chondrocytes to mechanical stimuli are poorly understood. In this study, a series of in vitro tests are performed, in which single chondrocytes are subjected to shear deformation by a horizontally moving probe. Dramatically different probe force–indentation curves are obtained for untreated cells and for cells in which the actin cytoskeleton has been disrupted. Untreated cells exhibit a rapid increase in force upon probe contact followed by yielding behaviour. Cells in which the contractile actin cytoskeleton was removed exhibit a linear force–indentation response. In order to investigate the mechanisms underlying this behaviour, a three-dimensional active modelling framework incorporating stress fibre (SF) remodelling and contractility is used to simulate the in vitro tests. Simulations reveal that the characteristic force–indentation curve observed for untreated chondrocytes occurs as a result of two factors: (i) yielding of SFs due to stretching of the cytoplasm near the probe and (ii) dissociation of SFs due to reduced cytoplasm tension at the front of the cell. In contrast, a passive hyperelastic model predicts a linear force–indentation curve similar to that observed for cells in which the actin cytoskeleton has been disrupted. This combined modelling–experimental study offers a novel insight into the role of the active contractility and remodelling of the actin cytoskeleton in the response of chondrocytes to mechanical loading.     

表达绿色荧光蛋白基因的花鲈胚胎干细胞株的建立及其体外分化

以带有绿色荧光标记的基因(pCMV-EGFP)为报告基因,用Genejammer、Genejuice和Metafectene三种脂质体介导花鲈胚胎干细胞(LJES1)的基因转移.实验发现,Genejammer介导的细胞转化效率最高,高达27.3%,其余分别为12.1%和5.3%.转移绿色荧光蛋白(GFP)基因的LJES1细胞经过药物筛选和单克隆化培养,获得了表达GFP基因的阳性克隆细胞株,经PCR对GFP阳性细胞株的基因组DNA及提取的RNA扩增,获得了目的条带,证实了GFP基因已经整合到LJES1细胞的基因组中,并获得了正常的表达.通过体外诱导,GFP阳性细胞能够分化为神经细胞、肌肉细胞、成纤维细胞等,用悬滴法培养获得了GFP阳性细胞的拟胚体,证实了经过长期的药物筛选后,LJES1细胞仍然保持着发育的多能性.这一研究,为进一步利用海水鱼类胚胎干细胞进行遗传操作及基因工程的研究提供了方法上的探索.     

Mathematical modelling of adult hippocampal neurogenesis: effects of altered stem cell dynamics on cell counts and bromodeoxyuridine-labelled cells

In the adult hippocampus, neurogenesis—the process of generating mature granule cells from adult neural stem cells—occurs throughout the entire lifetime. In order to investigate the involved regulatory mechanisms, knockout (KO) experiments, which modify the dynamic behaviour of this process, were conducted in the past. Evaluating these KOs is a non-trivial task owing to the complicated nature of the hippocampal neurogenic niche. In this study, we model neurogenesis as a multicompartmental system of ordinary differential equations based on experimental data. To analyse the results of KO experiments, we investigate how changes of cell properties, reflected by model parameters, influence the dynamics of cell counts and of the experimentally observed counts of cells labelled by the cell division marker bromodeoxyuridine (BrdU). We find that changing cell proliferation rates or the fraction of self-renewal, reflecting the balance between symmetric and asymmetric cell divisions, may result in multiple time phases in the response of the system, such as an initial increase in cell counts followed by a decrease. Furthermore, these phases may be qualitatively different in cells at different differentiation stages and even between mitotically labelled cells and all cells existing in the system.     

In vitro and in silico investigations of disc nucleus replacement

Currently, numerous hydrogels are under examination as potential nucleus replacements. The clinical success, however, depends on how well the mechanical function of the host structure is restored. This study aimed to evaluate the extent to and mechanisms by which surgery for nucleus replacements influence the mechanical behaviour of the disc. The effects of an annulus defect with and without nucleus replacement on disc height and nucleus pressure were measured using 24 ovine motion segments. The following cases were considered: intact; annulus incision repaired by suture and glue; annulus incision with removal and re-implantation of nucleus tissue repaired by suture and glue or plug. To identify the likely mechanisms observed in vitro, a finite-element model of a human disc (L4–L5) was employed. Both studies were subjected to physiological cycles of compression and recovery. A repaired annulus defect did not influence the disc behaviour in vitro, whereas additional nucleus removal and replacement substantially decreased disc stiffness and nucleus pressure. Model predictions demonstrated the substantial effects of reductions in replaced nucleus water content, bulk modulus and osmotic potential on disc height loss and pressure, similar to measurements. In these events, the compression load transfer in the disc markedly altered by substantially increasing the load on the annulus when compared with the nucleus. The success of hydrogels for nucleus replacements is not only dependent on the implant material itself but also on the restoration of the environment perturbed during surgery. The substantial effects on the disc response of disruptions owing to nucleus replacements can be simulated by reduced nucleus water content, elastic modulus and osmotic potential.     

Neurogenic differentiation of human umbilical cord mesenchymal stem cells on aligned electrospun polypyrrole/polylactide composite nanofibers with electrical stimulation

Adult central nervous system (CNS) tissue has a limited capacity to recover after trauma or disease. Recent medical cell therapy using polymeric biomaterialloaded stem cells with the capability of differentiation to specific neural population has directed focuses toward the recovery of CNS. Fibers that can provide topographical, biochemical and electrical cues would be attractive for directing the differentiation of stem cells into electro-responsive cells such as neuronal cells. Here we report on the fabrication of an electrospun polypyrrole/polylactide composite nanofiber film that direct or determine the fate of mesenchymal stem cells (MSCs), via combination of aligned surface topography, and electrical stimulation (ES). The surface morphology, mechanical properties and electric properties of the film were characterized. Comparing with that on random surface film, expression of neurofilament-lowest and nestin of human umbilical cord mesenchymal stemcells (huMSCs) cultured on film with aligned surface topography and ES were obviously enhanced. These results suggest that aligned topography combining with ES facilitates the neurogenic differentiation of huMSCs and the aligned conductive film can act as a potential nerve scaffold.     

The effect of perfusion culture on proliferation and differentiation of human mesenchymal stem cells on biocorrodible bone replacement material

Biocorrodible iron foams were coated with different calcium phosphate phases (CPP) to obtain a bioactive surface and controlled degradation. Further adhesion, proliferation and differentiation of SaOs-2 and human mesenchymal stem cells were investigated under both static and dynamic culture conditions. Hydroxyapatite (HA; [Ca₁₀(PO₄)₆OH₂]) coated foams released 500 μg/g iron per day for Dulbecco's modified eagle medium (DMEM) and 250 μg/g iron per day for McCoys, the unmodified reference 1000 μg/g iron per day for DMEM and 500 μg/g iron per day for McCoys, while no corrosion could be detected on brushite (CaHPO₄) coated foams. Using a perfusion culture system with conditions closer to the in vivo situation, cells proliferated and differentiated on iron foams coated with either brushite or HA while in static cell culture cells could proliferate only on Fe-brushite. We conclude that the degradation behaviour of biocorrodible iron foams can be varied by different calcium phosphate coatings, offering opportunities for design of novel bone implants. Further studies will focus on the influence of different modifications of iron foams on the expression of oxidative stress enzymes. Additional information about in vivo reactions and remodelling behaviour are expected from testing in implantation studies.     

Thermal effects and plasma damage upon encapsulation of polymer solar cells

A barrier structure consisting of silicon oxide and silicon nitride films was deposited via plasma-enhanced chemical vapor deposition (PECVD) for the encapsulation of polymer solar cells (PSCs). The total concentration of the solution and the ratio of P3HT and PCBM on the performance of polymer solar cells were studied by UV-Vis absorption spectroscopy, atomic force microscopy and photocurrent measurement. Base on these measurements, there is a compromise between light absorption and phase separation with increasing blend concentration. The PSCs were annealed at 80, 100, 120 and 140 °C for 10-60 min to investigate the thermal effects and to estimate the best deposition temperature of the barrier layers. Nevertheless, the devices with the encapsulation of barrier layers had relatively low power conversion efficiencies (PCE) of 0.98% comparing to the devices heated in the PECVD system (1.57%) at the same condition of 80 °C for 45 min due to the plasma damage during the film deposition process. After inserting a 5-nm TiO_x layer between Al/barrier structure and active layer against the plasma damage, the annealed devices presented an average PCE of 2.26% and demonstrated over 50% of their initial value after constant exposure to ambient atmosphere and sunlight for 1500 h.     

The biodegradation pathway of triethylamine and its biodegradation by immobilized Arthrobacter protophormiae cells

A bacterial strain named R4 was isolated from a wastewater treatment pool containing triethylamine (TEA) as the sole source of carbon and nitrogen. Strain R4 was identified as Arthrobacter protophormiae based on 16S rRNA gene sequence analysis and morphological and physiological properties. The optimal pH, temperature and concentration of NaCl for TEA degradation by strain R4 were 7.0, 30°C and 0.5%, respectively. Strain R4 could completely degrade 100 mg l(-1) TEA to ammonia in 32 h, and could also effectively degrade diethylamine (DEA) and ethylamine (EA) to ammonia. The degradation of TEA was strongly inhibited by some metal ions (Cu(2+), Mn(2+), Zn(2+), Co(2+), Ni(2+) and Ag(+)) (1.0mM). Addition of either SO(4)(2-) or NH(4)(+) reduced the degradation efficiency of TEA by strain R4 to a certain extent. The inhibition became significant when the concentration of SO(4)(2-) and NH(4)(+) reached to 11 mM and 30 mM, respectively. Cell-free extracts prepared from cells grown in TEA exhibited TEA monooxygenase, DEA monooxygenase and EA monooxygenase activity. Here, we propose the metabolic pathway of TEA degradation in strain R4. The efficiency of TEA removal by immobilized cells of strain R4 was found to be equivalent to that of free cells. In addition, the immobilized cells could be reused without reduction in their ability to degrade TEA.     

The influence of surface lubricity on the adhesion of Navicula perminuta and Ulva linza to alkanethiol self-assembled monolayers

The settlement and adhesion of Navicula perminuta and Ulva linza to methyl-terminated alkanethiol self-assembled monolayers (SAMs) of increasing chain length has been investigated. Organisms were allowed to settle onto the monolayers and were subsequently exposed to hydrodynamic shear stress in order to determine their adhesion strength. Results show that as the SAM structure changes from amorphous to crystalline (C14), there is a marked change in the adhesion of N. perminuta and U. linza. Given that the SAMs in the series all exhibit similar contact angle behaviour and surface energy, it is hypothesized that the lubricity of the surface plays a role in determining the surface adhesion.     

Modelling the effects of past and future climate on the risk of bluetongue emergence in Europe

Vector-borne diseases are among those most sensitive to climate because the ecology of vectors and the development rate of pathogens within them are highly dependent on environmental conditions. Bluetongue (BT), a recently emerged arboviral disease of ruminants in Europe, is often cited as an illustration of climate''s impact on disease emergence, although no study has yet tested this association. Here, we develop a framework to quantitatively evaluate the effects of climate on BT''s emergence in Europe by integrating high-resolution climate observations and model simulations within a mechanistic model of BT transmission risk. We demonstrate that a climate-driven model explains, in both space and time, many aspects of BT''s recent emergence and spread, including the 2006 BT outbreak in northwest Europe which occurred in the year of highest projected risk since at least 1960. Furthermore, the model provides mechanistic insight into BT''s emergence, suggesting that the drivers of emergence across Europe differ between the South and the North. Driven by simulated future climate from an ensemble of 11 regional climate models, the model projects increase in the future risk of BT emergence across most of Europe with uncertainty in rate but not in trend. The framework described here is adaptable and applicable to other diseases, where the link between climate and disease transmission risk can be quantified, permitting the evaluation of scale and uncertainty in climate change''s impact on the future of such diseases.     

矿化柞蚕丝胶膜表面粗糙度的调控及其对骨髓间充质干细胞生长行为的影响

生物材料表面的粗糙度是影响细胞行为的重要因素之一。为了调控丝蛋白生物材料表面的粗糙度,并评价材料表面粗糙度对细胞生长行为的影响,首先,通过湿化学共沉淀法,以柞蚕丝胶(AS)溶液为模板,诱导了羟基磷灰石(HAp)晶体成核,进而调控了AS膜表面的粗糙度。然后,采用SEM、粗糙仪、FTIR及EDX等对HAp/AS复合膜表面形貌、粗糙度及成分进行了表征。最后,通过SEM和CellTiter 96?AQueous单溶液细胞增殖检测试剂盒(MTS)检测了骨髓间充质干细胞(BMSCs)在HAp/AS复合膜表面的形貌及增殖率。结果表明:纯AS膜的表面粗糙度为0.15μm,矿化1、8及24h后,表面粗糙度分别为0.38、0.46和1.20μm;矿化24h后,在HAp/AS复合膜表面可观察到直径为30~80nm的球状复合物,生成的矿化物为HAp;HAp/AS复合膜具有良好的细胞相容性,表面粗糙度为1.20μm的复合膜能够显著促进BMSCs的增殖,粗糙度对BMSCs在HAp/AS复合膜表面的粘附和形貌有着重要的影响。因此,可通过矿化的方法在生物大分子表面诱导HAp晶体的成核与生长,从而调控材料的表面粗糙度,研究材料界面上的细胞行为。     

The effect of individual variation on the structure and function of interaction networks in harvester ants

Social insects exhibit coordinated behaviour without central control. Local interactions among individuals determine their behaviour and regulate the activity of the colony. Harvester ants are recruited for outside work, using networks of brief antennal contacts, in the nest chamber closest to the nest exit: the entrance chamber. Here, we combine empirical observations, image analysis and computer simulations to investigate the structure and function of the interaction network in the entrance chamber. Ant interactions were distributed heterogeneously in the chamber, with an interaction hot-spot at the entrance leading further into the nest. The distribution of the total interactions per ant followed a right-skewed distribution, indicating the presence of highly connected individuals. Numbers of ant encounters observed positively correlated with the duration of observation. Individuals varied in interaction frequency, even after accounting for the duration of observation. An ant''s interaction frequency was explained by its path shape and location within the entrance chamber. Computer simulations demonstrate that variation among individuals in connectivity accelerates information flow to an extent equivalent to an increase in the total number of interactions. Individual variation in connectivity, arising from variation among ants in location and spatial behaviour, creates interaction centres, which may expedite information flow.     

Identifying and rationalizing the morphological,structural, and optical properties of [... formula ...]-Ag2MoO4 microcrystals,and the formation process of Ag nanoparticles on their surfaces: combining experimental data and first-principles calculations

We present a combined theoretical and experimental study on the morphological, structural, and optical properties of β-Ag₂MoO₄ microcrystals. β-Ag₂MoO₄ samples were prepared by a co-precipitation method. The nucleation and formation of Ag nanoparticles on β-Ag₂MoO₄ during electron beam irradiation were also analyzed as a function of electron beam dose. These events were directly monitored in real-time using in situ field emission scanning electron microscopy (FE-SEM). The thermodynamic equilibrium shape of the β-Ag₂MoO₄ crystals was built with low-index surfaces (001), (011), and (111) through a Wulff construction. This shape suggests that the (011) face is the dominating surface in the ideal morphology. A significant increase in the values of the surface energy for the (011) face versus those of the other surfaces was observed, which allowed us to find agreement between the experimental and theoretical morphologies. Our investigation of the different morphologies and structures of the β-Ag₂MoO₄ crystals provided insight into how the crystal morphology can be controlled so that the surface chemistry of β-Ag₂MoO₄ can be tuned for specific applications. The presence of structural disorder in the tetrahedral [MoO₄] and octahedral [AgO₆] clusters, the building blocks of β-Ag₂MoO₄, was used to explain the experimentally measured optical properties.     

North–South divide: contrasting impacts of climate change on crop yields in Scotland and England

Effects of climate change on productivity of agricultural crops in relation to diseases that attack them are difficult to predict because they are complex and nonlinear. To investigate these crop–disease–climate interactions, UKCIP02 scenarios predicting UK temperature and rainfall under high- and low-CO₂ emission scenarios for the 2020s and 2050s were combined with a crop-simulation model predicting yield of fungicide-treated winter oilseed rape and with a weather-based regression model predicting severity of phoma stem canker epidemics. The combination of climate scenarios and crop model predicted that climate change will increase yield of fungicide-treated oilseed rape crops in Scotland by up to 0.5 t ha⁻¹ (15%). In contrast, in southern England the combination of climate scenarios, crop, disease and yield loss models predicted that climate change will increase yield losses from phoma stem canker epidemics to up to 50 per cent (1.5 t ha⁻¹) and greatly decrease yield of untreated winter oilseed rape. The size of losses is predicted to be greater for winter oilseed rape cultivars that are susceptible than for those that are resistant to the phoma stem canker pathogen Leptosphaeria maculans. Such predictions illustrate the unexpected, contrasting impacts of aspects of climate change on crop–disease interactions in agricultural systems in different regions.     

Predicting connectivity of green turtles at Palmyra Atoll,central Pacific: a focus on mtDNA and dispersal modelling

Population connectivity and spatial distribution are fundamentally related to ecology, evolution and behaviour. Here, we combined powerful genetic analysis with simulations of particle dispersal in a high-resolution ocean circulation model to investigate the distribution of green turtles foraging at the remote Palmyra Atoll National Wildlife Refuge, central Pacific. We analysed mitochondrial sequences from turtles (n = 349) collected there over 5 years (2008–2012). Genetic analysis assigned natal origins almost exclusively (approx. 97%) to the West Central and South Central Pacific combined Regional Management Units. Further, our modelling results indicated that turtles could potentially drift from rookeries to Palmyra Atoll via surface currents along a near-Equatorial swathe traversing the Pacific. Comparing findings from genetics and modelling highlighted the complex impacts of ocean currents and behaviour on natal origins. Although the Palmyra feeding ground was highly differentiated genetically from others in the Indo-Pacific, there was no significant differentiation among years, sexes or stage-classes at the Refuge. Understanding the distribution of this foraging population advances knowledge of green turtles and contributes to effective conservation planning for this threatened species.     

The role of BMP-2, low-level laser therapy and low x-ray doses in dental follicle stem cell migration

The knowledge of how cells respond to different treatments in terms of their migration potential could improve bone regeneration and osseointegration of dental implants. The objective of this study was to elucidate the effects of various chemoattractants, bone morphogenetic protein-2 (BMP-2), low-level laser therapy (LLLT), and cone beam computed tomography (CBCT) on the migration of dental follicle stem cells (DFSCs). The chemoattractants used in our study were the serum-free (SF) conditioned media that were harvested from osteoblast cell cultures seeded on the surface of titanium implants—Ti6Al7Nb (TiCtrl), implants infiltrated with hydroxyapatite (TiHA), with silicatitanate (TiSiO₂), and from culture of DFSCs cultivated on TiCtrl implants. We used the scratch migration assay to evaluate the influence of BMP-2, LLLT therapy, and CBCT on the migration potential of DFSCs. The migration scratch assay indicates that the BMP-2 growth factor is able to increase the DFSC migration compared to control culturing medium and regardless of laser or CBCT exposure. The results demonstrate the importance of improving the implant surface with HA, SiO₂, and DFSCs. Stimulated DFSCs will secrete growth factors which will act as chemoattractants for the stem cells of the implant host. Adding growth factors such as BMP-2 can improve the migration process of DFSCs.     

Novel carboxymethyl derivatives of chitin and chitosan materials and their biomedical applications

Chitin and chitosan are natural biopolymers that are non-toxic, biodegradable and biocompatible. In the last decade, chitin and chitosan derivatives have garnered significant interest in the biomedical and biopharmaceutical research fields with applications as biomaterials for tissue engineering and wound healing and as excipients for drug delivery. Introducing small chemical groups to the chitin or chitosan structure, such as alkyl or carboxymethyl groups, can drastically increase the solubility of chitin and chitosan at neutral and alkaline pH values without affecting their characteristics; substitution with carboxyl groups can yield polymers with polyampholytic properties. Carboxymethyl derivatives of chitin and chitosan have shown promise for adsorbing metal ions, as drug delivery systems, in wound healing, as anti-microbial agents, in tissue engineering, as components in cosmetics and food and for anti-tumor activities. This review will focus on the preparative methods and applications of carboxymethyl and succinyl derivatives of chitin and chitosan with particular emphasis on their uses as materials for biomedical applications.     

Fabrication and characterisation of Cu(In,Ga)Se2 solar cells on polyimide

Solar cells with the structure ZnO:Al/i-ZnO/CdS/Cu(In,Ga)Se₂/Mo/polyimide were examined using a range of techniques. The elemental composition of the Cu(InGa)Se₂ (CIGS) layers, their crystalline structure and optical properties were studied. Photoluminescence (PL) spectra of the CIGS absorber layers were studied as functions of temperature (4.2-240 K) and excitation power density. The band gap energy E_g of the CIGS layers was determined by employing photoluminescence excitation (PLE) spectroscopy. The influence of sodium incorporation on the PL properties of CIGS was analysed. Correlations of the optical properties of the CIGS absorber layers and the photovoltaic parameters of the solar cells were revealed.     

Ambiguities in Powder Indexing: the Impact of a Quaternary Lattice Metric Singularity on the Characterization of Mawsonite and Chatkalite

A lattice metric singularity occurs when unit cells defining two (or more) lattices yield the identical set of unique calculated d-spacings. The minerals Mawsonite and Chatkalite are of especial interest as both are characterized by tetragonal unit cells that correspond to the second member of a quaternary lattice metric singularity. This singularity includes lattices that are Cubic I, Tetragonal P, Orthorhombic F, and Orthorhombic P. The Mawsonite and Chatkalite lattices are unique in that they are highly specialized. In each case: (1) the determinative c/a ratio is very near 1/√2, (2) the symmetrical scalars of the reduced form [a · a : b · b : c · c = 1:2:2] have greater specialization than required for the given reduced form type, (3) the tetragonal lattice has derivative lattices of higher symmetry, and (4) the powder pattern is highly compressed. Mawsonite and Chatkalite serve as exemplar-type compounds. Their tetragonal structure has important implications in structure determination using powder diffraction data. First, any cubic I lattice — established solely on the basis of indexing procedures — may actually be tetragonal or orthorhombic. Second, in establishing the lattice of an unknown, results from powder data indexing require routine confirmation by other techniques (e.g., single crystal, optical, etc.).