The Al2O3-Nd2O3 Phase Diagram

A tentative phase diagram for the system Al₂0₃-Nd₂O₃ is presented. Three compounds were obtained: a β -A1₂O₃-type compound, the perovskite NdAlO₃, and Nd₄Al₂O₉. The perovskite melts congruently (mp 2090°C), and the two other compounds exhibit incongruent melting behavior: β -Nd/Al₂O₃, mp 1900°C; Nd₄Al₂O₉, mp 1905°C. Two eutectics exist with the following compositions and melting points: 80 mol% Al₂O₃, 1750°C; 23 mol% Al₂O₃,1800°C. Nd₄Al₂O9 decomposes in the solid state at 1780°C.     

Conversion from β-Ce2O3·11Al2O3 to α-Al2O3 in Tetragonal ZrO2 Matrix

Composites of β-Ce₂O₃·11Al₂O₃ and tetragonal ZrO₂ were fabricated by a reductive atmosphere sintering of mixed powders of CeO₂, ZrO₂ (2 mol% Y₂O₃), and Al₂O₃. The composites had microstructures composed of elongated grains of β-Ce₂O₃·11Al₂O₃ in a Y-TZP matrix. The β-Ce₂O₃·11Al₂O₃ decomposed to α-Al₂O₃ and CeO₂ by annealing at 1500°C for 1 h in oxygen. The elongated single grain of β-Ce₂O₃·11Al₂O₃ divided into several grains of α-Al₂O₃ and ZrO₂ doped with Y₂O₃ and CeO₂. High-temperature bending strength of the oxygen-annealed α-Al₂O₃ composite was comparable to the β-Ce₂O₃·11Al₂O₃ composite before annealing.     

Synthesis of Transparent Nd-doped HfO2-Y2O3 Ceramics Using HIP

A Nd-doped HfO₂-Y₂O₃ ceramic having excellent transmittance was synthesized by HIPing, using high-purity powders (>99.99 wt%) of Y₂O₃, Nd₂O₃, and HfO₂. The mixed powder compacts of these powders were sintered at 1650°C for 1 h under vacuum and HIPed at 1700°C for 3 h under 196 MPa of Ar. The specimen after HIPing consisted of uniform grains measuring about 30 μm and having pore-free structure. The optical transmittance of 1 at.% Nd-doped 2.6 mol% HfO₂-Y₂O₃ ceramics ranging between visible and infrared wavelength was almost equivalent or superior to that of a Nd:Y₂O₃ single crystal grown by the Verneuil method.     

Formation and Transformation of Cubic ZrO2 Solid Solutions in the System ZrO2—Al2O3

In the system ZrO₂-Al₂O₃, cubic ZrO₂ solid solutions containing up to 40 mol% Al₂O₃ crystallize at low temperatures from amorphous materials prepared by the simultaneous hydrolysis of zirconium and aluminum alkoxides. The values of the lattice parameter, a, increase linearly from 0.5095 to 0.5129 nm with increasing Al₂O₃ content. At higher temperatures, the solid solutions transform into tetragonal ZrO₂ and α-Al₂O₃. Pure ZrO₂ crystallizes in the tetragonal form at 415° to 440°C.     

Crystallization of MgO-Al2O3-SiO2-ZrO2 Glasses

The crystallization of MgO-Al₂O₃-SiO₂-ZrO₂ glasses at 1000°C was studied. Isothermal heat treatments of a cordierite-based glass (2MgO.2Al₂O₃.5SiO₂= Mg₂Al₄Si₅O₁₈) with 7 wt% ZrO₂ produced surface crystallization of α-cordierite and tetragonal ZrO₂ ( t -ZrO₂). These phases advanced into the glass by cocrystallization of t -ZrO₂ rods in an α-cordierite matrix with a well-defined orientation relation. The t -ZrO₂ rods were unstable with respect to diffusional breakup (a Rayleigh instability) and decomposed into rows of aligned ellipsoidal and spheroidal particles. The t -ZrO₂ was very resistant to transformation to monoclinic symmetry. With a similar glass containing 15 wt% ZrO₂, surface crystallization of α-cordierite and t -ZrO₂ was accompanied by internal crystallization of t -ZrO₂ dendrites. Transformation of the dendrites to mono-clinic symmetry was observed under some conditions.     

Microwave-Hydrothermal Synthesis of Monodispersed Nanophase α-Fe2O3

Synthesis of monodispersed nanophase α-Fe₂O₃ (hematite) powder to be used as a red pigment in porcelains was investigated using microwave-hydrothermal and conventional-hydrothermal reactions using 0.018 M FeCl₃·6H₂O and 0.01 M HCl solutions at 100°–160°C. Acicular and yellow β-FeOOH (akaganite) particles 300 nm in length and 40 nm in thickness were dominantly formed at 100°C after 2–3 h, while spherical α-Fe₂O₃ particles 100–180 nm in diameter were preferentially formed after 13 h using a conventional-hydrothermal reaction. However, a microwave-hydrothermal reaction at 100°C led to monodispersed and red α-Fe₂O₃ particles 30–66 nm in diameter after 2 h without the formation of β-FeOOH particles. In this paper, the effect of microwave radiation during hydrothermal treatment at 100°–160°C on the formation yield, kinetics, morphology, phase type, and color of α-Fe₂O₃ was investigated.     

The Pseudobinary Ti-ZrO2

The vertical section Ti-ZrO₂ within the Ti-Zr-O system was investigated by metallographic, X-ray diffraction, electron probe, and melting point studies. Analyses were conducted using arcmelted specimens which had been equilibrated and quenched from temperatures of 600° to 1600°C. The Ti-ZrO₂ section is similar to the Zr-ZrO₂ system. At high temperatures, considerable amounts of Zr and O go into solid solution in Ti, stabilizing α-Ti to 30 wt% ZrO₂. From 30 to 98 wt% ZrO₂ an α-Ti+ZrO₂ region is defined, and at compositions above 98 wt% ZrO₂, single-phase ZrO₂( ss ) exists. At low temperatures an α-Ti+(Ti,Zr)₃O field exists from 22 to 32 wt% ZrO₂; this region decreases in size with increasing temperature until it disappears at 1200°C. Above 32 wt% ZrO₂, a three phase α-Ti+ (Ti,Zr)₃O+ZrO₂ field exists; its stability extends from 1200°C at 30 wt%      

Influence of Nd2O3 Doping on the Reaction Process and Sintering Behavior of BaCeO3 Ceramics

The influence of Nd₂O₃ doping on the reaction process and sintering behavior of BaCeO₃ is investigated. Formation of BaCeO₃ is initiated at 800°C and completed at 1000°C. When Nd₂O₃ is added to the starting materials, the formation of BaCe_1–xNd_xO_3–δ is delayed and the temperature for complete reaction is increased to 1100°C. Only a BaCe_1-xNd_xO_3–δ solid solution with an orthorhombic crystal structure is present in the specimens for x ≤ 0.1. A secondary phase rich in Ce and Nd is formed within grains and at grain boundaries, when the Nd₂O₃ content is greater than the solubility limit (x ≥ 0.2). Pure BaCeO₃ is difficult to sinter, even at 1500°C, and only a porous microstructure could be obtained. However, doping BaCeO₃ with Nd₂O₃ markedly enhances its sinterability. The enhancement of the sinterability of Nd₂O₃-doped specimens at x ≤ 0.1 is attributed to the increase in the concentration of oxygen ion vacancies, which increases the diffusion rate. At x ≥ 0.2, the grain size is abnormally coarsened, which is caused by the formation of a liquid phase. While this liquid phase accelerates sintering, its beneficial effect on densification is counteracted by the segregation of the secondary grain-boundary phase which inhibits sintering.     

Zirconium Aluminum Carbides: New Precursors for Synthesizing ZrO2–Al2O3 Composites

ZrO₂–Al₂O₃ nanocrystalline powders have been synthesized by oxidizing ternary Zr₂Al₃C₄ powders. The simultaneous oxidation of Al and Zr in Zr₂Al₃C₄ results in homogeneous mixture of ZrO₂ and Al₂O₃ at nanoscale. Bulk nano- and submicro-composites were prepared by hot-pressing as-oxidized powders at 1100°–1500°C. The composition and microstructure evolution during sintering was investigated by XRD, Raman spectroscopy, SEM, and TEM. The crystallite size of ZrO₂ in the composites increased from 7.5 nm for as-oxidized powders to about 0.5 μm at 1500°C, while the tetragonal polymorph gradually converted to monolithic one with increasing crystallite size. The Al₂O₃ in the composites transformed from an amorphous phase in as oxidized powders to θ phase at 1100°C and α phase at higher temperatures. The hardness of the composite increased from 2.0 GPa at 1100°C to 13.5 GPa at 1400°C due to the increase of density.     

Stability of Ultrafine Tetragonal ZrO2 Coprecipitated with Al2O3 by the Spray-ICP Technique

The transformation of ultrafine powders (particle size, 0.01 to 0.04 μm) of the system ZrO_2–Al₂O₃, prepared by spraying their corresponding nitrate solutions into an inductively coupled plasma (ICP) of ultrahigh temperature, was investigated. The powders were composed of metastable tetragonal ZrO₂ ( mt- ZrO₂) and γ-Al₂O₃. On heating, the mt- ZrO₂ (or tetragonal ZrO₂, t -ZrO₂) was retained up to 1200°C. At 1380°C the transformation to monoclinic ZrO₂ ( m -ZrO₂) occurred and the amount of the m -ZrO₂ decreased with the increase in Al₂O₃ content, thus indicating the stabilization of the t -ZrO₂ by the Al₂O₃, which seems to be explained in terms of the retardation of grain growth.     

Al2O3–ZrO2–SiO2 Ternary Glasses for Molybdenum Oxidation Barriers

The wettability of binary and ternary glasses belonging to SiO₂–Al₂O₃–ZrO₂ diagram has been studied using the sessile drop technique at 1750° and 1800°C. The ternary SiO₂–Al₂O₃–ZrO₂ (90–5–5 wt%) glass has proved to be well appropriated as a molybdenum oxidation barrier coating. The addition of 5 wt% of MoO₂ slightly improves its wettablity at higher temperatures without affecting its oxidation barrier properties. The Mo comes into the glass network as a mixture of Mo⁵⁺, Mo⁴⁺, and Mo⁶⁺. After oxidation at 1000°C in oxygen atmosphere, the molybdenum remains in the glass network as Mo⁶⁺.     

Phase Transformation and Densification Behavior of Microwave-Sintered Si3N4–Y2O3–MgO–ZrO2 System

A 2.45 GHz microwave-sintered Si₃N₄–Y₂O₃–MgO system containing various amounts of ZrO₂ secondary additives have been studied with respect to phase transformation and densification behavior. The temperature dependent dielectric properties were measured from 25°C to 1400°C using a conventional cavity perturbation technique. Phase transformation behavior was studied using X-ray diffractometry. Microwave sintered results were compared with those of conventional sintered results. It has been found that α to β phase transformation was completed at a lower temperature in microwave-sintered samples than those of the conventionally sintered samples. Density of the microwave-sintered samples increased up to 2.5 wt% of ZrO₂ addition and thereafter it showed a tendency to decrease or remain constant. The decrease in density is attributed to the pore generation caused by decomposition due to the localized over heating.     

Crystal Chemistry and Phase Equilibrium Studies of the BaO(BaCO3)–½R2O3–CuOx Systems in Air: VI, R = Neodymium

Crystal chemistry and subsolidus phase equilibrium studies of the Ba-Nd-Cu-O system near the CuO and Nd₂O₃ corners have been carried cut at 950°C in air. Two solid-solution series have been identified in the Ba-Nd-Cu-O system. The first series involves the high- T _c superconductor phase, and has the formula Ba_2–xNd_1+xCu₃O_6+z, where × < ≅ 0.7. At the ideal compound stoichiometry of Ba₂NdCu₃O_6+z, the transformation from the high- T _c orthorhombic to tetragonal phase occurs at 550°–575°C in air. This temperature varies as a function of composition, and at x ≅ 0.2 to 0.3 it occurs at 950°C. The second solid solution is the non-superconducting "brown phase" represented by Ba_2+2x-Nd_4–2xCu_2–xO_10–2z 0 ≤ x ≤ 0.1. Preliminary phase diagrams of the BaO–Nd₂O₃ and Nd₂O₃–CuO_x systems are also presented. Standard X-ray diffraction patterns of BaNd₂–CuO₅ and (Nd_1.9Ca_0.1)CuO_4–z are provided.     

Microstructure, Conductivity, and NO2 Sensing Characteristics of α-Al2O3-Doped (8 mol% Sc2O3)ZrO2 Composite Solid Electrolyte

α-Al₂O₃-doped (8 mol % Sc₂O₃)ZrO₂ composite solid electrolyte has been investigated in the fabrication of solid-state ceramic gas sensors. The microstructure and electrical conductivity of the composite solid electrolyte have been measured over a range of temperature from 240°C to 596°C. The composite solid electrolyte has been found to exhibit a higher conductivity compared with the commonly used (8 mol% Y₂O₃)ZrO₂ at temperatures above ∼448°C. The sensing characteristics for NO₂ detection have been studied in the temperature range of 500–650°C at the low concentration from 10 to 30 ppm and at high concentration from 100 to 500 ppm of NO₂. The NO₂ sensor was found to respond reproducibly and rapidly to the variations of NO₂, concentration, indicating that the composite solid electrolyte has promising application as a solid electrolyte for on-board exhaust gas monitoring.     

Effect of the Amount of Additives and Post-Heat Treatment on the Microstructure and Mechanical Properties of Yttrium–α-Sialon Ceramics

The yttrium–sialon ceramics with the composition of Y_0.333Si₁₀Al₂ON₁₅ and an excess addition of Y₂O₃ (2 or 5 wt%) were fabricated by hot isostatic press (HIP) sintering at 1800°C for 1 h. The resulting materials were subsequently heat-treated in the temperature range 1300–1900°C to investigate its effect on the α→β-sialon phase transformation, the morphology of α-sialon grains, and mechanical properties. The results show that α-sialons stabilized by yttrium have high thermal stability. An adjustment of the α-sialon phase composition is the dominating reaction in the investigated Y–α-sialon ceramics during low-temperature annealing. Incorporation of excess Y₂O₃ could effectively promote the formation of elongated α-sialon grains during post-heat-treating at relatively higher temperature (1700° and 1900°C) and hence resulted in a high fracture toughness ( K _IC= 6.3 MPa·m^1/2) via grain debonding and pullout effects. Although the addition of 5 wt% Y₂O₃ could promote the growth of elongated α grains with a higher aspect ratio, the higher liquid-phase content increased the interfacial bonding strength and therefore hindered interface debonding and crack deflection. The heat treatment at 1500°C significantly changed the morphology of α-sialon grains from elongated to equiaxed and hence decreased its toughness.     

Homogeneity Region and Thermal Stability of Neodymium-Doped α-Sialon Ceramics

Dense sialon ceramics along the tie line between Si₃N₄ and Nd₂O₃·9AlN were prepared by hot-pressing at 1800°C. The materials were subsequently heat-treated in the temperature range 1300–1750°C and cooled either by turning off the furnace (yielding a cooling rate (T_cool) of ∼50°C/min) or quenching (T_cool≥ 400°C/min). It was found necessary to use the quenching technique to reveal the true phase relationships at high temperature, and it was established that single-phase α-sialon forms for 0.30 x 0. 51 in the formula Nd_xSi_{12–4S x} Al_{4.5 x} O_{1. 5 x} , N_{16–1.5 x} . The α-sialon is stable only at temperatures above 1650°C, and it transforms at lower temperatures by two slightly different diffusion-controlled processes. Firstly, an α-sialon phase with lower Nd content is formed together with an Al-containing Nd-melilite phase, and upon prolonged heat treatment thus-formed α-sialon decomposes to the more stable β-sialon and either the melilite phase or a new phase of the composition NdAl(Si_6-zAl_z)N_10-zO_z. Nd-doped α-sialon ceramics containing no crystalline intergranular phase show very high hardness (HV10 = 22. 5 GPa) and a fracture toughness ( K _lc= 4.4 MPa·m^1/2) at room temperature. The presence of the melilite phase, which easily formed when slow cooling rates were applied or by post-heat-treatment, reduced both the fracture toughness and hardness of the materials.     

High-Temperature Strength and Fracture Toughness of Y2O3-Partially-Stabilized ZrO2/Al2O3 Composites

The temperature dependence of bending strength, fracture toughness, and Young's modulus of composite materials fabricated in the ZrO₂ (Y₂O₃)-Al₂O₃ system were examined. The addition of A1203 enhanced the high-temperature strength. Isostatically hot-pressed, 60 wt% ZrO₂ (2 mol% Y₂O₃)/40 wt% Al₂O₃ exhibited an extremely high strength, 1000 MPa, at 1000°C.     

Phase Relations and Ordering in the Systems MgO-Y2O3-ZrO2 and CaO-MgO-ZrO2

The phase relations in the systems MgO-Y₂O₃-ZrO₂ and CaO-MgO-ZrO₂ were established at 1220° and 1420°C. The system MgO-Y₂O₃-ZrO₂ possesses a much-larger cubic ZrO₂ solid solution phase field than the system CaO-MgO-ZrO₂ at both temperatures. The ordered δ phase (Zr₃Y₄O₁₂) was found to be stable in the system ZrO₂-Y₂O₃ at 1220°C. Two ordered phases φ₁ (CaZr₄O₉) and φ₂ (Ca₆Zr₁₉O₄₄) were stable at 1220°C in the system ZrO₂-CaO. At 1420°C no ordered phase appears in either system, in agreement with the previously determined temperature limits of the stability for the δ, φ₁, and φ₂ phases. The existence of the compound Mg₃Y_zO₆ could not be confirmed.     

Phase Relations in the Pyrochlore-Rich Part of the Bi2O3−TiO2−Nd2O3 System

In this study we used solid-state synthesis to determine the phase relations in the pyrochlore-rich part of the Bi₂O₃−TiO₂−Nd₂O₃ system at 1100°C. The samples were analyzed using X-ray powder diffraction and scanning electron microscopy with energy- and wavelength-dispersive spectroscopy. A single-phase pyrochlore ceramic was obtained with the addition of 4.5 mol% of Nd₂O₃. We determined the solubility limits for the three solid solutions: (i) the pyrochlore solid solution Bi_{(1.6–1.08 x )}Nd _x Ti₂O_{(6.4+0.3 x )}, where 0.25< x <0.96; (ii) the solid solution Bi_{4− x} Nd _x Ti₃O₁₂, where 0< x <2.6; and (iii) the Nd_{2− x} Bi _x Ti₂O₇ solid solution, where 0< x <0.35. The determined phase relations in the pyrochlore-rich part are presented in a partial phase diagram of the Bi₂O₃−TiO₂−Nd₂O₃ system in air at 1100°C.     

Characterization of Interfacial Reactions Between β-Al2O3 and Y2O3-Partially-Stabilized ZrO2

The interfacial reaction between Y₂O₃-partially-stabilized ZrO₂ and α-Al₂O₃ was studied. It was noted that α-Al₂O₃ forms inside the periphery of the β-Al₂O₃ grains; its formation suggests the loss of Na₂O from the p-Al₂O₃, either by evaporation or by dissolution in the ZrO₂ matrix. The presence of Na₂ZrO₃ is suspected.