Anaerobic co-digestion of winery wastewater.

The operational performance of anaerobic batch reactors treating winery wastewater (WW) combined with waste activated sludge (WAS) in different proportions was investigated under mesophilic conditions. In these experiments it was shown that for anaerobic digestion of WW alone, methane production rate was lower than the rates achieved when WW and WAS were treated together. When WW was mixed with WAS at a concentration of 50% WW resulted in the highest methane production rates. A simplified anaerobic model was used to determine the main kinetic parameters; maximum COD reduction rate (q(DA)) and maximum methane generation rate (k(max)). The maximum values of q(DA) and k(max) were 16.50 kgCOD COD(-1) d(-1) and 14.34 kgCOD kgCOD(-1) d(-1), respectively.     

Reuse of drinking water treatment sludge for olive oil mill wastewater treatment

Olive mill wastewater (OMW) results from the production of olive oil, which is an important traditional agro-industry in Mediterranean countries. In continuous three-phase centrifugation 1.0-1.2 m(3) of OMW are produced per ton of processed olives. Discharge of OMW is of serious environmental concern due to its high content of organic matter with phytotoxic properties, namely phenolic compounds. Meanwhile, drinking water treatment sludge (DWTS) is produced in high amounts and has long been considered as a waste for landfill. The aim of this work was the assessment of reusing DWTS for OMW treatment. High performance liquid chromatography (HPLC) analysis was carried out to determine the phenolic compounds present and to evaluate if they are recalcitrant. Treatability assays were performed using a dosage of DWTS from 50 to 300 g L(-1). Treatment efficiency was evaluated based on the removal of chemical oxygen demand (COD), biochemical oxygen demand (BOD), total solids (TS), total suspended solids (TSS), total volatile solids (TVS), oil and grease (OG), phenols (total phosphorous (TP) and HPLC fraction). Results from OMW HPLC characterization identified a total of 13 compounds; the major ones were hydroxytyrosol, tyrosol, caffeic acid, p-cumaric acid and oleuropein. Treatability assays led to a maximum reduction of about 90% of some of the phenolic compounds determined by HPLC. Addition of 200-300 g L(-1) of DWTS reduced 40-50% of COD, 45-50% of TP, a maximum of nearly 70% TSS and 45% for TS and TVS. The OG fraction showed a reduction of about 90%, achieved adding 300 g L(-1) od DWTS. This study points out the possibility of establishing an integrated management of OMW and DWTS, contributing to a decrease in the environmental impact of two industrial activities, olive oil production and drinking water treatment.     

Anaerobic processes in activated sludge

We found anoxic zones in aerated activated sludge flocs, and demonstrated denitrification under normal operating conditions. Sulfate reduction was not found. Micro-environments and microbial conversions in flocs from bulking and non-bulking activated sludge were determined with microsensors for H₂S, O₂, NO₂₋ and NO₃₋. Denitriftcation and sulfate reduction rates were measured with ¹⁵N- and ³⁵S-tracer techniques. We showed that under normal reactor conditions (ca. 20% air saturation) anoxic zones develop within flocs allowing denitrification. The denitrtftcation rates amounted to 40% of the rates under anoxic conditions. At 100% air saturation no anoxic zones were found and no denitrification occurred. However, in flocs from bulking sludge (at 20% air saturation) anoxic zones were absent and denitrification did not occur. In bulking sludge only at total anoxia was denitrification found. Confocal microscopy showed that flocs from bulking sludge were much looser than those from non-bulking sludge. The absence of anoxic zones and of denitrification was attributed to the open floc structure, allowing advective oxygen transport.Sulfate reduction was not detected in any of the sludges tested by microsensors or by tracer techniques even under anoxic conditions. This indicates that the sulfur cycle (sulfate reduction and sulfide oxidation) does not play a role in mineralization processes and bulking in activated sludge. Preliminary molecular work (in situ hybridization with the 16S-rRNA probe SRB385) indicated the presence of small amounts of sulfate reducing bacteria in all sludges. Either the probe is not specific or the sulfate reducers present are not active under reactor conditions.     

Anaerobic co-digestion of sludge with other organic wastes in small wastewater treatment plants: an economic considerations evaluation.

This paper deals with an economic comparison between costs and incomes in small wastewater treatment plants where the anaerobic co-digestion process of sludge and biowaste with energy recovery is operated. Plants in the size range 1,000-30,000 persons equivalent (pe) were considered in the study: typical costs, comprehensive of capital and operating costs, were in the range euro69-105 per person per year depending on the plant size: the smaller the size the higher the specific cost. The incomes deriving from taxes and fees for wastewater treatment are generally in the range euro36-54 per person per year and can only partially cover costs in small wastewater treatment plants. However, the co-treatment of biowaste and the use of produced energy for extra credits (green certificates) determine a clear improvement in the possible revenues from the plant. These were calculated to be euro23-25 per person per year; as a consequence the costs and incomes can be considered comparable for wastewater treatment plants (WWTPs) with size larger than 10,000 pe. Therefore, anaerobic co-digestion of biowaste and sludge can also be considered a sustainable solution for small wastewater treatment plants in rural areas where several different kinds of biowaste are available to enhance biogas production in anaerobic reactors.     

Anaerobic co-digestion of sludge with other organic wastes and phosphorus reclamation in wastewater treatment plants for biological nutrients removal.

This paper deals with the performances obtained in full scale anaerobic digesters co-digesting waste activated sludge from biological nutrients removal wastewater treatment plants, together with different types of organic wastes (solid and liquid). Results showed that the biogas production can be increased from 4000 to some 18,000 m3 per month when treating some 3-5 tons per day of organic municipal solid waste together with waste activated sludge. On the other hand, the specific biogas production was improved, passing from 0.3 to 0.5 m3 per kgVS fed the reactor, when treating liquid effluents from cheese factories. The addition of the co-substrates gave minimal increases in the organic loading rate while the hydraulic retention time remained constant. Further, the potentiality of the struvite crystallisation process for treating anaerobic supernatant rich in nitrogen and phosphorus was studied: 80% removal of phosphorus was observed in all the tested conditions. In conclusion, a possible layout is proposed for designing or upgrading wastewater treatment plants for biological nutrients removal process.     

Oxidative processes for olive mill wastewater treatment.

The present work describes an experimental study carried out in order to investigate the efficiency and feasibility of physical (lime coagulation) and advanced oxidation processes (Ozone and Fenton's process) for olive oil mill wastewater treatment. Particular attention was paid to the degradation of both organic and phenolic compounds. Lime coagulation reaches maximum removal at a pH of 12, with a TP (total polyphenols) and COD reduction of 37 and 26%, respectively. Ozone oxidation is also pH-dependent, showing the higher removal efficiency (91% for TP and 19% for COD) with an initial pH value of 12. Experimental results show a lower efficiency of Fenton's process than ozone in TP removal, reaching a maximum value of 60%. Oxidation trials carried out on gallic and p-coumaric synthetic solutions confirmed ozone and Fenton's efficiency at degrading phenolic compounds. Biological trials, both aerobic and anaerobic, highlighted a significant increase of biodegradability of treated OMW samples if compared to the untreated ones. Respirometric tests showed an increase in BOD of about 20% and anaerobic batch tests provided a methane production up to eight times higher.     

Comparative study of MBR and activated sludge in the treatment of paper mill wastewater.

The study was based on a full scale activated sludge plant (AS) compared to a parallel operated pilot membrane bioreactor (MBR) with flat sheets membranes. Both systems received their influent from an anaerobic bioreactor treating paper mill wastewater. MBR produced an effluent of much better quality than AS in terms of suspended solids, containing 1 mg/L or less in 80% of the monitoring time, while the AS effluent contained 12 mg/L. This could save the necessity of further treatment by filtration in the case of MBR. Other effluent quality parameters, such as organic matter (COD and BOD), phosphorus and ammonia nitrogen, did not indicate substantial differences between AS and MBR. Calcium carbonate scaling and formation of a bacterial layer on the membrane caused severe flux reduction. The membrane blockage because of scaling and biofouling proved to be very serious, therefore, it required proper and more complicated maintenance than the AS system. This study leads to the conclusion that in the case of paper mill wastewater, after anaerobic biotreatment, if there is no need for excellent effluent quality in terms of suspended solids, the replacement of the AS by the MBR would not be strongly justified, mainly because of maintenance cost.     

Co-conditioning and dewatering of alum sludge and waste activated sludge.

Co-conditioning and dewatering behaviors of alum sludge and waste activated sludge were investigated. Two different sludges were mixed at various ratios (2:1; 1:1; 1:2; 1:4) for study. Capillary suction time (CST) and specific resistance to filtration (SRF) were utilized to assess sludge dewaterability. Relatively speaking, waste activated sludge, though of higher solid content, was more difficult to be dewatered than alum sludge. It was found that sludge dewaterability and settlability became better with increasing fraction of alum sludge in the mixed sludge. Dosage required of the cationic polyelectrolyte (KP-201C) for dewatering was reduced as well. It is proposed that alum sludge acts as skeleton builder in the mixed sludge, and renders the mixed sludge more incompressible which is beneficial for sludge dewatering. Implications of the results of the study to the sludge management plan for Taipei City that generates both alum sludge and waste activated sludge at significant amount are also discussed. The current sludge treatment and disposal plan in Metropolitan Taipei could be made more cost-effective.     

Anaerobic codigestion of waste activated sludge and OFMSW: the experiences of viareggio and treviso plants (Italy).

The paper presents the results of two full-scale applications of the anaerobic co-digestion process of waste activated sludge together with the organic fraction of municipal solid wastes. The experiences were carried out at Viareggio and Treviso wastewater treatment plants (Italy). In the first plant, 3 tons per day of source sorted OFMSW were co-digested with waste activated sludge, increasing the organic loading rate from 1.0 to 1.2 kgTVS/m3d. This determined a 50% increase in biogas production. At Treviso WWTP, which has been working for 2 years, some 10 tons per day of separately collected OFMSW are treated using a low-energy consumption sorting line, which allows the removal of 99% and 90% of metals and plastics respectively. In these conditions, the biogas yield increased from 3,500 up to 17,500 m3/month. Industrial costs were evaluated less than 50 Euro per ton of organic waste, while the payback time was calculated as two years.     

Increased biogas production in a wastewater treatment plant by anaerobic co-digestion of fruit and vegetable waste and sewer sludge - a full scale study

Anaerobic digestion is a well established technology for the reduction of organic matter and stabilization of wastewater. Biogas, a mixture of methane and carbon dioxide, is produced as a useful by-product of the process. Current solid waste management at the city of Prince George is focused on disposal of waste and not on energy recovery. Co-digestion of fresh fruit and vegetable waste with sewer sludge can improve biogas yield by increasing the load of biodegradable material. A six week full-scale project co-digesting almost 15,000 kg of supermarket waste was completed. Average daily biogas production was found to be significantly higher than in previous years. Digester operation remained stable over the course of the study as indicated by the consistently low volatile acids-to-alkalinity ratio. Undigested organic material was visible in centrifuged sludge suggesting that the waste should have been added to the primary digester to prevent short circuiting and to increase the hydraulic retention time of the freshly added waste.     

Multi-component kinetics of activated sludge treatment of bleached kraft mill effluent.

This study investigated the discrepancies between the BOD removal rates measured during short term assays and those measured during continuous activated sludge treatment of bleached kraft mill effluent (BKME). A combination of batch tests and fed batch tests with oxygen uptake rate (OUR), chemical oxygen demand (COD), biochemical oxygen demand (BOD), and mixed liquor volatile suspended solids (MLVSS) measurements were used to characterize the degradation rates for the activated sludge treatment of BKME and to divide the soluble readily biodegradable substrate into two to five separate fractions based on biodegradation rates. The removal rates varied by over an order of magnitude between the most readily degradable substrates (1 x 10(-3) mg COD/mg MLVSS minute), and the more slowly degradable substrates (2 x 10(-5) mg COD/mg MLVSS minute). If the readily biodegradable fraction of BKME was modeled as one substrate, initial rate kinetic measurements from batch tests were heavily influenced by the fractions with the greatest degradation rates, while any remaining BOD in the treated effluent was predominantly from the slowly degradable fraction, giving inconsistent results. Taking the multi-component nature of the wastewater into account, batch test results can be used to predict fed-batch and continuous activated sludge reactor performance.     

烟酸对毛纺废水活性污泥处理系统的影响

烟酸是合成辅酶的原料,也是许多微生物生长所必需的维生素之一。以静态试验得出的烟酸最佳投加浓度为依据,采用连续流的实际毛纺废水活性污泥试验及对照系统,进行连续投加烟酸的试验,维持曝气系统内烟酸浓度1mg/L。在16d的投加期间,投加组的平均CODCr去除率为对照组的1.3倍,活性污泥平均总脱氢酶活性和平均内源呼吸脱氢酶活性分别为对照组的1.34倍和1.44倍。     

Strategy for olive mill wastewater treatment and reuse with a sewage plant in an arid region.

This study was conducted to evaluate the treatability of OMW (olive mill wastewater) with sewage and sewage sludge, which could supplement nutrients and microbes required for OMW treatment and reduce its possible toxicity. The amount of OMW added to an aeration tank was based on the loading difference between the designed and actual COD loads, while the amount added to anaerobic digestion for energy recovery was determined by CH4 production. The COD removal efficiencies were 70-85% for both systems. Compost of OMW with dried sewage sludge also showed a similar temperature profile without OMW addition. This strongly suggested that OMW can be treated at a sewage plant without pretreatment and the treated effluent can be reused in irrigation for an arid region.     

Anaerobic uptake of glutamate and aspartate by enhanced biological phosphorus removal activated sludge

Mechanisms of the anaerobic uptake of glutamate and aspartate by enhanced biological phosphorus removal activated sludge were investigated. Sludge hydrolysate with hydrochloric acid was analyzed by reverse phase HPLC after pre column derivatization with dabsyl-chloride. The experimental results indicated that glutamate is accumulated as a polymer consisting of γ-aminobutyric acid and an unknown amino acid. On the other hand, aspartate was found to be deaminated and then accumulated as PHA.     

初沉污泥和厨余垃圾的混合中温厌氧消化

对初沉污泥和厨余垃圾混合中温厌氧消化的可行性进行了研究。采用两种物料混合,其初沉污泥和垃圾按VS之比分别为3∶1和1∶1,HRT分别采用10d、13d、16d、20d。试验结果表明,在所有的反应器运行过程中,进料有机负荷为1.66~4.19gVS/(L·d),所有反应器系统中均没有出现如pH降低、碱度不足、氨抑制和VFA积累等抑制现象。在两种进料条件下,相应的VS去除率分别为61.8%~66.4%和67.5%~70.4%,甲烷产率分别为0.441~0.447L/gVS和0.47~0.482L/gVS。     

Treatment of wastewater containing high phenol concentrations using stabilisation ponds enriched with activated sludge.

Treatment of wastewater containing high phenol concentrations (up to 4,000 mg/l, 1,600 kg/ha.d) in laboratory-scale stabilisation ponds enriched with activated sludge was studied. Phenol was biodegraded efficiently, even when fed as the sole carbon source. At influent concentrations of 1,000, 1,300, 1,600, 1,900, 2,500, 3,000 and 4,000 mg/l of phenol (loading rates of 400, 520, 640, 760, 1,000, 1,200 and 1,600 kg phenol/ha.d), the phenol removal efficiencies were 92, 89, 81, 81, 76, 65 and 22%, respectively. At 4,000 mg/l of phenol, the enriched ponds were significantly inhibited. The maximum phenol removal rate observed was 780 kg/ha.d, which is 7.7 times higher than the maximum value reported for attached-growth waste stabilisation ponds. All along the experiments, the enriched ponds showed removal rates 1.8-20.5 times higher than the values observed in control pond (not enriched). The results suggest that enrichment is an effective method to increase xenobiotic removal rates of stabilisation ponds.     

剩余污泥减量化技术研究进展与发展趋势

按照物理、化学、生物及组合工艺的分类对污泥减量技术的研究发展状况进行了分析,并 通过污水处理效果来评价各污泥减量工艺。总结出污泥减量化的两个发展趋势:通过调整反应器和 工艺参数实现在污泥产生过程中减少污泥产量;在污泥回流过程中通过细胞溶解实现在污泥产生后 减少污泥外排量。     

Anaerobic thermophilic digestion of sewage sludge with a thickened sludge recycle

The process of anaerobic thermophilic digestion of municipal wastewater sludge with a recycled part of thickened digested sludge, was studied in semi-continuous laboratory digesters. This modified recycling process resulted in increased solids retention time (SRT) with the same hydraulic retention time (HRT) as compared with traditional digestion without recycling. Increased SRT without increasing of HRT resulted in the enhancement of volatile substance reduction by up to 68% in the reactor with the recycling process compared with 34% in a control conventional reactor. Biogas production was intensified from 0.3 L/g of influent volatile solids (VS) in the control reactor up to 0.35 L/g VS. In addition, the recycling process improved the dewatering properties of digested sludge.     

Microbial community analysis during continuous fermentation of thermally hydrolysed waste activated sludge

Acidogenic fermentation of thermally hydrolysed waste activated sludge was carried out at laboratory scale in two reactors operated under different hydraulic retention times (HRT). Process performance was assessed in terms of volatile fatty acid (VFA) composition and yield. The diversity of the microbial population was investigated by constructing a 16S rRNA gene library and subsequent phylogenetic analysis of clones. Fluorescence in situ hybridization (FISH) was used to assess the relative abundance of different bacterial groups. Bacteroidetes and Firmicutes were the dominant taxonomic groups representing 93% of the total sequences obtained in the reactor with 4 d HRT. A similar VFA yield (0.4-0.5 g VFA(COD) g SCOD(-1)) was obtained for the HRTs tested (1-4 d), indicating that extended retention times were not useful. Within Firmicutes, Clostridia was the major group detected in the clone sequences. These had close affiliation to Sporanaerobacter acetigenes, suggesting organisms of this group were important for hydrolysis of the protein fraction of the substrate. However, FISH analysis failed to detect the major portion of the bacteria, and this is most likely due to the lack of appropriate probes. This work emphasizes the diversity of fermentative communities, and indicates that more work is needed to identify and detect the important members.     

活性污泥数学模型在污水处理中的研究和应用进展

阐述了国际水协会（IWA）推出的活性污泥1号（ASMI）、2号（ASM2）、2D号（ASM2D）、3号（ASM3）模型各自的机理和功能,介绍了ASM数学模型的改进及应用,最后分析讨论了模型研究与应用中存在的问题,并针对以上困难指出了模型在我国的发展前景。