Digital color management in full-color holographic three-dimensional printer

We propose a new method of color management for a full-color holographic, three-dimensional (3D) printer, which produces a volume reflection holographic stereogram using red, green, and blue three-color lasers. For natural color management in the holographic 3D printer, we characterize its color reproduction characteristics based on the spectral measurement of reproduced light. Then the color conversion formula, which comprises a one-dimensional lookup table and a 3×3 matrix, was derived from the measurement data. The color reproducibility was evaluated by printing a color chart hologram, and the average CIELAB ΔE=13.19 is fairly small.     

Polarization separation of light in holographic grating reflection in conical mounting

Abstract

We experimentally investigate the interaction of linearly polarized light with a holographic grating in a conical mounting. Due to the periodic structure, the polarization properties of the reflected zeroth-order beam are highly sensitive to the conical angle. When a focused Gaussian beam with linear polarization impinges on an air–grating interface at an exceptional conical angle, a spatial splitting of the reflected beam is observed behind a polarizer. We find that it can be interpreted using the anisotropy of the polarization distribution in holographic grating reflection.     

基于线阵 CCD 的全息光栅位移传感器

目的：提出了一种新型的基于全息光栅的CCD位移传感器。方法：利用CCD分辨率高，像素均匀等特点，对干涉条纹的移动进行精确定位，利用全息光栅在测量过程中又具有不受光源波长的影响，适用光谱范围宽等特点，实现位移的自动精确测量。结果：系统能够对位移实现自动精确测量。结论：该系统具有一定的实用价值及应用前景。     

Holographic sensor for water in solvents

The diffraction color of a gelatin holographic diffraction grating changed as a function of the water activity when immersed in a "wet" hydrophobic liquid. Quantification of the absorption maximum of the diffracted light showed that it was related, after calibration, to either the water content or the water activity of the solvent. The holographic diffraction grating measured water contents of hydrocarbon solvents at sensitivities comparable to that of the Karl Fischer coulometric titrator and over a wide range of water contents. A grating immersed in xylene revealed a visible color change when the water content was increased from 47 to 120 ppm. Conversely, the holographic grating responded to ethanol in water in the range 0-1% (w/w). The inexpensiveness and simplicity of silver halide holographic reflection gratings, combined with their relatively high sensitivity, suggests that these devices might find widespread application as immersible water activity sensors for hydrophobic liquids.     

Design of cascaded volume holographic gratings to increase the number of channels for an optical demultiplexer

The design and demonstration of a holographic optical demultiplexer based on cascaded volume holographic gratings are presented. By serially adding a second holographic grating, which has a different grating period, slant angle, and center wavelength compared with those of the first grating, the operating wavelength range of the optical demultiplexer could be expanded, and, therefore, the number of channels of the holographic demultiplexer is doubled. As a result of the experiment, a 0.4 nm spaced 130- channel demultiplexer with a channel uniformity of 3.5 dB, a 3 dB bandwidth of 0.12 nm, and channel cross talk of -20 dB is experimentally achieved.     

Highly corrected submicrometer grid patterning on curved surfaces

A compact holographic projector system was built and tested. This projection system offers a practical approach for making a highly corrected mesh or grid pattern on curved surfaces. The pattern can range in size from multimicrometer to submicrometer dimensions and be recorded in either positive or negative photoresist. Standing-wave interference patterns in the form of a diverging close-packed lattice of either hexagonal or square rodlike intensity maxima extending outward from a point or a locus of points are produced by multiple-beam holography that involves the combination of a holographic diffraction grating and a hypercomatic focusing objective.     

Electronic speckle pattern shearing interferometer with a photopolymer holographic grating

A photopolymer holographic grating is used to produce the two sheared images in an electronic speckle pattern shearing interferometer. A ground glass screen following the grating eliminates unwanted diffraction orders and removes the requirement for the CCD camera to resolve the diffraction grating's pitch. The sheared images on the ground glass are further imaged onto the CCD camera. The fringe pattern contrast was estimated to be above 90%. A validation of the system was done by comparing the theoretical phase difference distribution with the experimental data from the three-point bending test.     

Profile measurement taken with liquid-crystal gratings

Profile measurement taken with liquid-crystal gratings and a phase-shifting technique is proposed, and its effectiveness is verified by experiment. The surface profile is obtained by measurement of the phase distributions of the sinusoidal gratings deformed by an object's surface. The liquid-crystal grating gives an accurate phase shift, an arbitrary projection pitch, and a constant surface brightness compared with conventional gratings such as a laser interference fringe grating and a Ronchi grating. Therefore a flexible measuring system may be developed with it. Two gratings with different pitches are used to measure an object with large steps. A two-color projection system can be used to produce such gratings simultaneously. Locally varying reflectivity on a surface can also be compensated by adjustment of the color component of the projected grating with a liquid-crystal grating. Thus the contrast in the projected grating can be made uniform, and a good profile measurement can be accomplished.     

Polarization of holographic grating diffraction. I. General theory

The full polarization property of volume holographic grating diffraction is investigated theoretically. With a simple volume grating model, the diffracted fields and Mueller matrices are first derived from Maxwell's equations by using the Green's function algorithms. The formalism is derived for the general case that the diffraction beam and the grating wave vector are not in the plane of incidence, where s waves and p waves are not decoupled. The derived photon-momentum relations determine the Bragg angle selectivity. The parameters of diffraction strength related to the hologram-writing process and material are defined and are not necessarily small in general. The diffracted-beam profiles are analytically calculated by using the known grating shape function. This theory has provided a fundamental understanding of the polarization phenomena of a real holographic diffraction grating device. The derived algorithm would provide a simulation-analysis tool for the engineering design of real holographic beam combiner/splitter devices.     

一种Lab空间的色域边界描述算法

基于区域分割法,提出一种Lab空间的色域边界描述算法,以更精确地实现图像颜色映射到打印机色域。在Lab空间内,首先用色域边界描述(GBD)对打印机色域进行整体分割描述,然后根据图像每个像素点的色相角计算打印机的线性色域边界(LGB),最后比较图像每个像素点的L值与LGB矩阵L值区间的关系,确定像素点是否在打印机色域边界内。算法在GBD对打印机色域边界进行分割后,还面向图像每个像素点确定打印机的LGB边界,色域边界描述更加精确。实验仿真结果表明,该方法能够更精确、直观地实现图像颜色映射到打印机颜色。     

Time-domain frequency-selective processing in nuclear magnetic resonance: a spatial-spectral holographic perspective

The fundamental nuclear magnetic resonance (NMR) imaging equation can be derived from a spatial-spectral holographic wavefront reconstruction formulation similar to that in quantum optics. A spatial-spectral holographic interpretation arises naturally in NMR from the inhomogeneous linewidth broadening due to either an imposed set of linear orthogonal gradient fields or from the intrinsic chemical anisotropy of the spin system. We can thus think of NMR k-space as a spatial-spectral holographic grating. The spatial holographic component arises from dielectric effects at high field strength (>4 T) when the excitation wavelength is less than or commensurate with the size of the imaging sample. The holographic properties of storage, time-reversal, recognition, and triple correlations are experimentally demonstrated in an inhomogeneously broadened NMR sample. This holographic NMR interpretation has additional implications on selective radio-frequency pulse design, microscopy imaging, and the use of conjugate imaging for field inhomogeneity corrections using the time-reversed component of the readout, to be the subject of a subsequent paper.     

十字光栅多普勒效应二维测量系统的研究

提出一种利用十字光栅衍射的多普勒效应进行二维位移测量的新方法。给出了以二维全息光栅为多普勒频移发生器、以矩形槽相位光栅为混频器的光路结构和测量原理。理论计算和实验表明,此系统具有良好的信号质量和较高的测量精确度,奇用于生产环境中的两坐标精密检测。     

Electro-optical investigations of holographic-polymer-dispersed ferroelectric liquid crystals

Uniform alignment of ferroelectric liquid-crystal domains encapsulated by a polymer binder was established through a holographic exposure process. The refractive index modulation in these thin films is modeled as a phase grating that can be electrically addressed to erase the optical diffractive properties. A phenomenological model is developed to take into account a distribution of domain sizes and an effective field that stabilizes the ferroelectric liquid-crystal domains. A diffraction model successfully predicts changes in normalized intensities for first-order diffraction with applied field. These gratings demonstrate microsecond-scale response and relaxation times for various grating pitch sizes between approximately 3 and approximately 12 microm.     

Tuning of external-cavity semiconductor lasers with chirped diffraction gratings

We present a novel scheme of tunable semiconductor laser based on the use of a chirped grating in an external cavity. The chirped grating is fabricated using a simple holographic technique: two Gaussian beams having wavefronts with different radii of curvature are brought to interfere on a photoresist layer. The tuning properties of chirped gratings have been investigated with semiconductor lasers operated with an external cavity. With this type of grating positioned in Littrow configuration, the wavelength selection can be done by translating the grating without any need to rotate it. This cavity configuration provides a tunable output beam with an angle of propagation that is independent of the wavelength. The translation of chirped gratings was shown to tune a visible diode laser and an infrared diode laser over the same spectral band as the conventional tuning scheme where an unchirped grating is rotated.     

Comparison of mechanically ruled versus holographically varied line-spacing gratings for a soft-x-ray flat-field spectrograph

Recent progress in the design of aspheric wave-front recording systems has permitted the manufacture of holographic gratings with highly variable groove densities that are suitable for flat-field spectrographs. A holographic grating thus recorded was processed to produce a laminar profile by use of reactive-ion etching. Measurements are reported of the absolute diffraction efficiency of this grating and of a comparable mechanically ruled grating. It is found that the holographic grating is much more effective in suppressing the higher orders. The spectral resolution was determined by use of a carbon Kalpha x-ray generator and a spectrograph with an imaging detector. The spectral resolution of the holographic grating was approximately 3 times worse than that of the ruled grating.     

Analytic steady-state solutions to dynamic grating envelope

Abstract

The photorefractive holographic recording is a dynamic grating formulation process, where the grating is induced by the interference modulation of two beams, and the energies of the beams are exchanged with each other owing to their interaction in the induced grating. The grating modulation envelope is a comprehensive analysis for holographic dynamic recording and non-destructive readout, but analytic solutions can only be obtained by simultaneously solving the materials equations and the coupled wave equations. In this paper, based on Kukhtarev's model and Moharam's field function exact steady-state analytic expressions for dynamic grating envelopes are deduced for any constant values of light modulation depth and light excitation efficiency. Thus their approximations for straight formulation instead of parametric formulation are then obtained. These steady-state analytic solutions to envelopes describe the dynamic holographic recording and readout more clearly and exactly.     

A Blazed Holographic Concave Grating for Monochromators

Abstract

The theory of blazed holographic gratings given in a previous paper is applied to the design of a blazed holographic aberration-corrected spherical concave grating. Two solution types are found which cover different ranges of blaze wavelength and aberration. The use of the refractive indices of the substrate, and the medium in front of the photoresist, as optimising parameters is demonstrated. Four ray-traced solution examples are given which include the distributions of blaze angle and wavelength across the grating surface.     

Linear diffraction grating interferometer with high alignment tolerance and high accuracy

We present an innovative structure of a linear diffraction grating interferometer as a long stroke and nanometer resolution displacement sensor for any linear stage. The principle of this diffractive interferometer is based on the phase information encoded by the ±1st order beams diffracted by a holographic grating. Properly interfering these two beams leads to modulation similar to a Doppler frequency shift that can be translated to displacement measurements via phase decoding. A self-compensation structure is developed to improve the alignment tolerance. LightTool analysis shows that this new structure is completely immune to alignment errors of offset, standoff, yaw, and roll. The tolerance of the pitch is also acceptable for most installation conditions. In order to compact the structure and improve the signal quality, a new optical bonding technology by mechanical fixture is presented so that the miniature optics can be permanently bonded together without an air gap in between. For the output waveform signals, a software module is developed for fast real-time pulse counting and phase subdivision. A laser interferometer HP5529A is employed to test the repeatability of the whole system. Experimental data show that within 15?mm travel length, the repeatability is within 15?nm.     

Full geometry dependence of index contrast in photorefractive polymer composites

Detailed analysis of the relationship between the experimental geometry and the holographic contrast in photorefractive polymers is important for applications, such as angle multiplexing in holographic data storage. In this paper the field dependent photogeneration efficiency is introduced into the complete reorientational model to provide a full account of the electric field and geometrical dependence of the index contrast. The interaction of a local grating and the photorefractive grating is also considered. A simplification for acute angles between writing beams is described. Experimental verification by use of four-wave mixing and transmission ellipsometry reveals an excellent agreement between theory and measurement.