Silver nanocrystal-modified silicon nanowires as substrates for surface-enhanced Raman and hyper-Raman scattering

Metal catalyzed, CVD-grown silicon nanowires decorated by chemical assembly of closely spaced Ag nanocrystals were modified with the well-known "silver mirror" reaction and investigated as substrates for surface-enhanced Raman (SERS) and hyper-Raman (SEHRS) spectroscopy. Four chromophores were examined: Rhodamine 6G, crystal violet, a cyanine dye, and a cationic donor-acceptor substituted stilbene. After soaking the substrates overnight in 10(-4) M aqueous chromophore solutions, all four chromophores gave good-quality SERS spectra in < or =60 s using <1 microW of 458-nm cw laser power, and SEHRS spectra are obtained in < or =120 s using <1 mW of mode-locked 916-nm laser power. Results from this substrate are compared with those on colloidal silver nanoparticles deposited as a film, as well as surfaces grown by the silver mirror reaction.     

Vibrational spectroscopy and mass spectrometry for characterization of soft landed polyatomic molecules

We report implementation of two powerful characterization tools, in situ secondary ion mass spectrometry (SIMS) and ex situ surface enhanced Raman spectroscopy (SERS), in analyzing surfaces modified by ion soft landing (SL). Cations derived from Rhodamine 6G are soft landed onto Raman-active silver colloidal substrates and detected using SERS. Alternatively and more conveniently, high-quality SERS data are obtained by spin coating a silver colloidal solution over the modified surface once SL is complete. Well-defined SERS features are observed for Rhodamine 6G in as little as 15 min of ion deposition. Deposition of ~3 pmo1 gave high-quality SERS spectra with characteristic spectroscopic responses being derived from just ~0.5 fmol of material. Confocal SERS imaging allowed the enhancement to be followed in different parts of deposited dried droplets on surfaces. Characteristic changes in Raman spectral features occur when Rhodamine 6G is deposited under conditions that favor gas-phase ion fragmentation. Simultaneous deposition of both the intact dye and its fragment ion occurs and is confirmed by SIMS analysis. The study was extended to other Raman active surfaces, including Au nanostar and Au coated Ni nanocarpet surfaces and to SL of other molecules including fluorescein and methyl red. Overall, the results suggest that combination of SERS and SIMS measurements are effective in the characterization of surfaces produced by ion SL with significantly enhanced molecular specificity.     

Use of a sample translation technique to minimize adverse effects of laser irradiation in surface-enhanced Raman spectrometry

Surface-enhanced Raman spectroscopy (SERS) has proven to be a very powerful tool in the analysis of a wide range of compounds. However, continuous irradiation of the laser beam over the SERS substrate can promote the gross decomposition of the sample analytes and significantly broaden and diminish the intensities of observed spectral bands. In addition, the incident radiation can promote thermal or photolytic fragmentation of analytes, thereby altering the observable bands and possibly leading to a misinterpretation of analytical data. Finally, chemical or morphological changes in the SERS substrate are possible. This work presents the use of a sample translation technique (STT) as a means to minimize these adverse effects. By spinning the sample rapidly, the effective residence time of analytes and substrate within the irradiated zone is dramatically decreased without reduction of spectral acquisition time or the density of analyte in the zone. The technique is studied by acquiring SERS spectra of Naproxen USP, riboflavin, folic acid, Rhodamine 6G, and 4-aminothiophenol using silver islands on glass and silver-poly(dimethylsiloxane) composite substrates under various spinning and stationary conditions. In all cases, spectra show improvements upon spinning at laser powers as low as 4.2 (+/- 0.1) mW. Specific differences in the appearance of the spectra and the potential use of STT for improved SERS qualitative and quantitative determinations are presented.     

Reproducible surface-enhanced Raman scattering spectra of bacteria on aggregated silver nanoparticles

Surface-enhanced Raman scattering (SERS) is proven to be a powerful technique for rapid identification and discrimination of microorganisms. However, due to the heterogeneous nature of the samples, the acquisition of reproducible spectra hinders the further development of the technique. In this study, we demonstrate the influence of the experimental conditions on SERS spectra. Then, we report a simple sample preparation method coupled with a light microscope attached to a Raman spectrometer to find a proper spot on the sample to acquire reproducible SERS spectra. This method utilizes the excited surface plasmons of the aggregated silver nanoparticles to visualize the spots on the sample. The samples are prepared using the concentrated silver colloidal solutions. The collection time for one spectrum is 10 s and each spectrum is a very good representative of the other spectra acquired from the same sample. The nature of the surface charge of the silver nanoparticles influences the spectral features by determining the strength of the interactions between nanoparticles and bacteria and the aggregation properties of the nanoparticles. Although increasing the colloid concentration in the sample resulted in reproducible spectra from arbitrary points on the sample, a great variation from sample to sample prepared with the different colloidal solution concentrations is observed.     

Vibrational and surface-enhanced Raman spectra of 1,6-diphenyl-1,3,5-hexatriene

The vibrational spectra and surface-enhanced Raman scattering (SERS) of 1,6-diphenyl-1,3,5-hexatriene (DPH) are discussed. The fundamental vibrational frequencies, overtones, and combinations observed in the infrared and Raman spectra of DPH are reported. The interpretation of the observed vibrational spectra was supported by a complete geometry optimization, followed by vibrational frequency and intensity computations for the cis- and trans- isomers of the DPH using density functional theory at the B3LYP/6-31G(d,p) level of theory. Because the molecule is photo-chemically active on Ag metal surfaces, the best SERS results for silver islands were obtained at low temperature and low energy density of the exciting laser line. DPH SERS on Au films was obtained at room temperature.     

Temperature dependence of silver nanostructure for surface enhanced Raman scattering application

We study the fabrication and application of the fractal silver nanostructure using an electrochemical process. Scanning electron microscope and high resolution transmission electron microscope images show the morphology of silver nanostructure can be well controlled via the various reaction times. The surface enhanced Raman scattering of 10 microM aqueous Rhodamine 6G (R6G) solutions conducted in as-fabricated silver nanostructure achieved an enhancement factor approximately 10(5) at room temperature. Meanwhile, an approximately 10(4) enhancement factor of SERS signal can be kept under 200 degrees C in present study. This study can help us to integrate the nano-metals and nano-particles for advanced nano devices.     

High-density silver nanoparticle film with temperature-controllable interparticle spacing for a tunable surface enhanced Raman scattering substrate

The formation of high-density silver nanoparticles and a novel method to precisely control the spacing between nanoparticles by temperature are demonstrated for a tunable surface enhanced Raman scattering substrates. The high-density nanoparticle thin film is accomplished by self-assembling through the Langmuir-Blodgett (LB) technique on a water surface and transferring the particle monolayer to a temperature-responsive polymer membrane. The temperature-responsive polymer membrane allows producing a dynamic surface enhanced Raman scattering substrate. The plasmon peak of the silver nanoparticle film red shifts up to 110 nm with increasing temperature. The high-density particle film serves as an excellent substrate for surface-enhanced Raman spectroscopy (SERS), and the scattering signal enhancement factor can be dynamically tuned by the thermally activated SERS substrate. The SERS spectra of Rhodamine 6G on a high-density silver particle film at various temperatures is characterized to demonstrate the tunable plasmon coupling between high-density nanoparticles.     

Part II: surface-enhanced Raman spectroscopy investigation of methionine containing heterodipeptides adsorbed on colloidal silver

Surface-enhanced Raman scattering (SERS) spectra of methionine (Met) containing dipeptides: Met-X and X-Met, where X is: L-glycine (Gly), L-leucine (Leu), L-proline (Pro), and L-phenylalanine (Phe) are reported. Using pre-aggregated Ag colloid we obtained high-quality SERS spectra of these compounds spontaneously adsorbed on colloidal silver. Additionally, we measured Raman spectra (RS) of these heterodipeptides in a solid state as well as in acidic and basic solutions. The RS and SERS spectra of Met-X and X-Met presented in this work appear to be different. One of the most prominent and common features in the SERS spectra of all these dipeptides is a band in the 660-690 cm(-1) range that is due to the C-S stretching, v(CS), vibration of Met. This suggests that all the abovementioned compounds adsorb on the silver surface through a thioether atom. On the other hand, the SERS spectra of X-Met show clearly that not only the S atom but also the carboxylate group interact with the colloid surface as manifested by the enhancement of bands in the 920-930 and 1380-1396 cm(-1) regions. These bands are ascribed to the v(C-COO(-)) and v(sym)(COO(-)) vibrations, respectively. Additionally, a SERS spectrum of Phe-Met indicates that the interaction of the thioether atom, amine group, and aromatic side chain with the silver surface is favorable and may dictate the orientation and conformation of adsorbed peptide.     

Fabrication of high performance surface enhanced Raman scattering substrates by a solid-state ionics method

Silver nanostructures were prepared by a solid-state ionics method using fast ionic conductor RbAg(4)I(5) films under a direct current electric field (DCEF). The surface morphology of the silver nanostructures grown under different constant current fields was characterized by scanning electron microscopy (SEM). Rhodamine 6G (R6G) aqueous solutions were used as probe molecules to detect the Raman enhancement performance of the silver nanostructure substrates. The effect of external electric field current intensity on the surface morphology of the silver nanostructures during the preparation was studied in detail. The enhancement effect of the silver nanostructure surface enhanced Raman scattering (SERS) substrates with different surface morphologies toward R6G was determined. We found that disordered silver nanowires (DSNW), ordered silver nanowires (OSNW), densely arranged silver nanobamboo arrays (SNBA) and compactly arranged silver nanobud clusters (SNBC) were respectively obtained when the constant current intensity was 3?μA, 5?μA, 8?μA and 12?μA under the same vacuum evaporation plating conditions. The limiting concentrations of R6G for these SERS substrates were found to be 10(-7)?mol?l(-1), 10(-13)?mol?l(-1), 10(-13)?mol?l(-1) and 10(-16)?mol?l(-1), respectively.     

Nanoparticle-functionalized porous polymer monolith detection elements for surface-enhanced Raman scattering

The use of porous polymer monoliths functionalized with silver nanoparticles is introduced in this work for high-sensitivity surface-enhanced Raman scattering (SERS) detection. Preparation of the SERS detection elements is a simple process comprising the synthesis of a discrete polymer monolith section within a silica capillary, followed by physically trapping silver nanoparticle aggregates within the monolith matrix. A SERS detection limit of 220 fmol for Rhodamine 6G is demonstrated, with excellent signal stability over a 24 h period. The capability of the SERS-active monolith for label-free detection of biomolecules was demonstrated by measurements of bradykinin and cytochrome c. The SERS-active monoliths can be readily integrated into miniaturized micrototal-analysis systems for online and label-free detection for a variety of biosensing, bioanalytical, and biomedical applications.     

Vibrational spectra and surface-enhanced vibrational spectra of 1-nitropyrene

The present report on the vibrational spectra of 1-nitropyrene (1NP) describes the infrared and Raman spectra; their interpretation is aided by local density functional theory (DFT) calculations at the B3LYP/6-311G(d, p) level of theory and by the surface-enhanced vibrational spectra (SEVS) with the final objective of trace organic analytical applications. The surface-enhanced Raman scattering (SERS) on silver island films and mixed silver/gold island films was investigated with several laser lines in the visible region. Surface-enhanced infrared absorption (SEIRA) was attempted on silver and gold island films. The interface of the organic 1-NP with smooth metal surfaces of silver and copper was also probed using reflection-absorption infrared (RAIRS) spectra that, in conjunction with the transmission spectra, allow one to extract the molecular orientation in vacuum evaporated thin solid films. Chemical adsorption of 1-NP on silver and further photochemical decomposition of the 1-NP-metal adsorbates was detected with all visible laser lines. Resonance Raman scattering (RRS) using UV-laser excitation at 325 nm was also recorded.     

Part I: surface-enhanced Raman spectroscopy investigation of amino acids and their homodipeptides adsorbed on colloidal silver

Surface-enhanced Raman scattering spectra (SERS) were measured for various amino acids: L-methionine (Met), L-cysteine (Cys), Lglycine (Gly), L-leucine (Leu), L-phenylalanine (Phe), and L-proline (Pro) and their homodipeptides (Met-Met, Cys-Cys, Gly-Gly, LeuLeu, Phe-Phe, and Pro-Pro) in silver colloidal solutions. The geometry and orientation of the amino acids or dipeptides on the silver surface, and their specific interaction with the surface, were deducted by detailed spectral analysis of the SERS spectra. This analysis has allowed us to propose the particular surface geometry of amino acids or dipeptides and also implied that C-C bonds were almost parallel to the surface, as evidenced by the absence of marker bands in the skeletal C-C stretching region of the spectra. Additionally, using "time-dependent" SERS measurements we solved an existing controversy regarding the binding specificity of Gly-Gly on the silver surface.     

Characterization of the Ag mediated surface-enhanced Raman spectroscopy of saxitoxin

The rapid detection and quantification of saxitoxin (STX) is reported using surface-enhanced Raman spectroscopy (SERS) with a colloidal hydrosol of silver nanoparticles. Under the conditions of our experiments, the limit of detection (LD) for STX using SERS is 3 nM, with a limit of quantification (LQ) of 20 nM. It is shown that the SERS method is rapid, with spectra being collected in as little as 5 seconds total integration time for a 40 nM STX sample. In order to improve the signal-to-noise ratio, SERS spectra were generally collected with a total integration time of 1 minute (6 accumulations of 10 seconds each), with no need for extensive sample work-up or substrate preparation. Based on these results, the SERS technique shows great promise for the future detection and quantification of STX molecules in aqueous solutions.     

On-line monitoring of airborne chemistry in levitated nanodroplets: in situ synthesis and application of SERS-active Ag-Sols for trace analysis by FT-Raman spectroscopy

We report a new strategy for on-line monitoring of chemical reactions in ultrasonically levitated, nanoliter-sized droplets by Raman spectroscopy. A flow-through microdispenser connected to an automated flow injection system was used to dose picoliter droplets into the node of an ultrasonic trap. Taking advantage of the flow-through characteristics of the microdispenser and the versatility of the automated flow system, a well-defined sequence of reagents could be injected via the microdispenser into the levitated droplet placed in the focus of the collection optics of the Fourier transform Raman spectrometer. In that way, chemical reactions could be carried out and monitored on-line. The developed system was used for fast, reproducible, in situ synthesis of a highly active surface enhanced Raman scattering (SERS) sol resulting from the reduction of silver nitrate with hydroxylamine hydrochloride in basic conditions. With this chemical system, SERS substrate preparation could be achieved at room temperature and in short time. The in situ prepared silver sol was used for trace analysis of several organic test molecules that were injected into the levitated SERS-active droplet again using the microdispenser. The concentration dependence of the SERS spectra was studied using 9-aminoacridine, revealing that down to the femtogram region high-quality SERS spectra could be obtained. Additionally, SERS spectra of 6-mercaptopurine, thiamine, and acridine were recorded in the levitated drop as well.     

Surface-enhanced Raman spectroscopy of soft-landed polyatomic ions and molecules

Surface-enhanced Raman spectroscopy (SERS) was used to detect and characterize polyatomic cations and molecules that were electrosprayed into the gas phase and soft-landed in vacuum on plasma-treated silver substrates. Organic dyes such as crystal violet and Rhodamine B, the nucleobase cytosine, and nucleosides cytidine and 2'-deoxycytidine were immobilized by soft landing on plasma-treated metal surfaces at kinetic energies ranging from near thermal to 200 eV. While enhancing Raman scattering 10(5)-10(6)-fold, the metal surface effectively quenches the fluorescence that does not interfere with the Raman spectra. SERS spectra from submonolayer amounts of soft-landed compounds were sufficiently intense and reproducible to allow identification of Raman active vibrational modes for structure assignment. Soft-landed species appear to be microsolvated on the surface and bound via ion pairing or pi-complexation to the Ag atoms and ions in the surface oxide layer. Comparison of spectra from soft-landed and solution samples indicates that the molecules survive soft landing without significant chemical damage even when they strike the surface at hyperthermal collision energies.     

Surface-enhanced Raman spectroscopy for bacterial discrimination utilizing a scanning electron microscope with a Raman spectroscopy interface

Surface-enhanced Raman scattering (SERS) utilizing colloidal silver has already been shown to provide a rapid means of generating "whole-organism fingerprints" for use in bacterial identification and discrimination. However, one of the main drawbacks of the technique for the analysis of microbiological samples with optical Raman microspectroscopy has been the inability to acquire pre-emptively a region of the sample matrix where both the SERS substrate and biomass are both present. In this study, we introduce a Raman interface for scanning electron microscopy (SEM) and demonstrate the application of this technology to the reproducible and targeted collection of bacterial SERS spectra. In secondary electron mode, the SEM images clearly reveal regions of the sample matrix where the sodium borohydride-reduced silver colloidal particles are present, Stokes spectra collected from these regions are rich in vibrational bands, whereas spectra taken from other areas of the sample elicit a strong fluorescence response. Replicate SERS spectra were collected from two bacterial strains and show excellent reproducibility both by visual inspection and as demonstrated by principal components analysis on the whole SERS spectra.     

Cylindrical posts of Ag/SiO₂/Au multi-segment layer patterns for highly efficient surface enhanced Raman scattering

We fabricated a regular array of Ag/SiO?/Au multi-segment cylindrical nanopatterns to create a highly efficient surface enhanced Raman scattering (SERS) active substrate using an advanced soft-nanoimprint lithographic technique. The SERS spectra results for Rhodamine 6G (R6G) molecules on the Ag/SiO?/Au multi-segment nanopatterns show that the highly ordered patterns and interlayer thickness are responsible for enhancing the sensitivity and reproducibility, respectively, The multi-segment nanopattern with a silica interlayer generates significant SERS enhancement (~EF = 1.2 x 10?) as compared to that of the bimetallic (Ag/Au) nanopatterns without a dielectric gap (~EF = 1.0 x 10?). Further precise control of the interlayer distances between the two metals plays an essential role in enhancing SERS performance for detecting low concentrations of analytes such as fluorescent (Rhodamine 6G) and DNA molecules. Therefore, the highly ordered multi-segment patterns provide great sensitivity and reproducibility of SERS based detection, resulting in a high performance of the SERS substrate.     

Analytical technique for label-free multi-protein detection based on Western blot and surface-enhanced Raman scattering

We have developed a new analytical procedure for label-free protein detection designated "Western SERS", consisting of protein electrophoresis, Western blot, colloidal silver staining, and surface-enhanced Raman scattering (SERS) detection. A novel method of silver staining for Western blot that uses a silver colloid, an excellent SERS-active substrate, is first proposed in the present study. During the process of silver staining, interactions between proteins and silver nanoparticles result in the emergence of SERS of proteins. In the present study, we use myoglobin (Mb) and bovine serum albumin (BSA) as model proteins. From different protein bands on a nitrocellulose (NC) membrane, we have observed surface-enhanced resonance Raman scattering (SERRS) spectra of Mb and SERS spectra of BSA. The proposed technique offers dual advantages of simplicity and high sensitivity. On one hand, after the colloidal silver staining, we can detect label-free multi-proteins directly on a NC membrane without digestion, extraction, and other pretreatments. On the other hand, the detection limit of the Western SERS is almost consistent with the detection limit of colloidal silver staining, and the SERRS detection limit of Mb is found to be 4 ng/band. This analytical method, which combines the technique of protein separation with SERS, may be a powerful protocol for label-free protein detection in proteomic research.     

Silver clusters onto nanosized colloidal silica as novel surface-enhanced Raman scattering active substrates

A new method is proposed for obtaining surface-enhanced Raman scattering (SERS)-active substrates by photochemical reduction of silver nitrate onto colloidal silica. Transmission electron microscopy (TEM) and UV-visible absorption spectroscopy are employed to investigate the nanoscale structure of the materials. High quality SERS spectra are obtained from different organic ligands to check the efficiency of these substrates. A marked stability of the colloidal suspension is ensured by the scarce tendency of the Ag-doped silica particles to aggregate by either aging or adsorption of ligand.     

Surface-enhanced Raman scattering: a structure-specific detection method for capillary electrophoresis

A new approach to detecting capillary electrophoresis (CE) eluent components by interfacing CE with a surface-enhanced Raman scattering (SERS) system is described. In this approach, CE-based separation of a mixture of trans-1,2-bis(4-pyridyl)ethylene and N,N-dimethyl-4-nitrosoaniline has been detected by SERS in a postcolumn geometry. The retention time obtained from SERS corresponds well with that from conventional UV-visible detection. Meanwhile, CE eluants are identified by their characteristic vibrational spectra, demonstrating the validity of SERS as a structure-specific detection method for CE. In addition, the ability to monitor SERS intensity changes at molecule-specific frequencies makes selective detection of individual analytes possible, even when separation is incomplete. Finally, CE-SERS is evaluated for separation of amino acids (tyrosine and tryptophan) and environmental pollutants (chlorophenol mixtures).