Nanostructural analysis by atomic force microscopy followed by light microscopy on the same archival slide

Integrated information on ultrastructural surface texture and chemistry increasingly plays a role in the biomedical sciences. Light microscopy provides access to biochemical data by the application of dyes. Ultrastructural representation of the surface structure of tissues, cells, or macromolecules can be obtained by scanning electron microscopy (SEM). However, SEM often requires gold or coal coating of biological samples, which makes a combined examination by light microscopy and SEM difficult. Conventional histochemical staining methods are not easily applicable to biological material subsequent to such treatment. Atomic force microscopy (AFM) gives access to surface textures down to ultrastructural dimensions without previous coating of the sample. A combination of AFM with conventional histochemical staining protocols for light microscopy on a single slide is therefore presented. Unstained cores were examined using AFM (tapping mode) and subsequently stained histochemically. The images obtained by AFM were compared with the results of histochemistry. AFM technology did not interfere with any of the histochemical staining protocols. Ultrastructurally analyzed regions could be identified in light microscopy and histochemical properties of ultrastructurally determined regions could be seen. AFM-generated ultrastructural information with subsequent staining gives way to novel findings in the biomedical sciences. Microsc. Res. Tech., 2009. © 2009 Wiley-Liss, Inc.     

Comparative atomic force and scanning electron microscopy: an investigation on fenestrated endothelial cells in vitro

Rat liver sinusoidal endothelial cells (LEC) contain fenestrae, which are clustered in sieve plates. Fenestrae control the exchange of fluids, solutes and particles between the sinusoidal blood and the space of Disse, which at its back side is flanked by the microvillous surface of the parenchymal cells. The surface of LEC can optimally be imaged by scanning electron microscopy (SEM), and SEM images can be used to study dynamic changes in fenestrae by comparing fixed specimens subjected to different experimental conditions. Unfortunately, the SEM allows only investigation of fixed, dried and coated specimens. Recently, the use of atomic force microscopy (AFM) was introduced for analysing the cell surface, independent of complicated preparation techniques. We used the AFM for the investigation of cultured LEC surfaces and the study of morphological changes of fenestrae. SEM served as a conventional reference.
AFM images of LEC show structures that correlate well with SEM images. Dried-coated, dried-uncoated and wet-fixed LEC show a central bulging nucleus and flat fenestrated cellular processes. It was also possible to obtain height information which is not available in SEM. After treatment with ethanol or serotonin the diameters of fenestrae increased (+6%) and decreased (−15%), respectively. The same alterations of fenestrae could be distinguished by measuring AFM images of dried-coated, dried-uncoated and wet-fixed LEC. Comparison of dried-coated (SEM) and wet-fixed (AFM) fenestrae indicated a mean shrinkage of 20% in SEM preparations. In conclusion, high-resolution imaging with AFM of the cell surface of cultured LEC can be performed on dried-coated, dried-uncoated and wet-fixed LEC, which was hitherto only possible with fixed, dried and coated preparations in SEM and transmission electron microscopy (TEM).     

Imaging surface and submembranous structures with the atomic force microscope: a study on living cancer cells, fibroblasts and macrophages

Atomic force microscopy (AFM) has been used to image a wide variety of cells. Fixed and dried-coated, wet-fixed or living cells were investigated. The major advantage of AFM over SEM is the avoidance of vacuum and electrons, whereas imaging can be done at environmental pressure and in aqueous conditions. Evidence of the successful application of AFM in biological imaging is provided by comparing results of AFM with SEM and/or TEM. In this study, we investigated surface and submembranous structures of living and glutaraldehyde-fixed colon carcinoma cells, skin fibroblasts and liver macrophages by AFM. Special attention was paid to the correct conditions for the acquisition of images of the surface of these cells, because quality SEM examinations have already been abundantly presented.
AFM imaging of living cells revealed specific structures, such as the cytoskeleton, which were not observed by SEM. Membrane structures, such as ruffles, lamellipodia, microspikes and microvilli, could only clearly be observed after fixing the cells with 0.1% glutaraldehyde. AFM images of living cells were comparable to SEM images of fixed, dried and coated cells, but contained a number of artefacts due to tip–sample interaction. In addition, AFM imaging allowed the visualization of cytoplasmic submembranous structures without the necessity for further preparative steps, allowing us: (i) to follow cytoskeletal changes in fibroblasts under the influence of the microfilament disrupting agent latrunculin A; (ii) to study particle phagocytosis in macrophages. Therefore, in spite of the slow image acquisition of the AFM, the instrument can be used for high-resolution real-time studies of dynamic changes in submembranous structures.     

Atomic force microscopy of freeze-fracture replicas of rat atrial tissue

Atomic force microscopy (AFM) has provided three-dimensional (3-D) surface images of many biological specimens at molecular resolution. In the absence of spectroscopic capability for AFM, it is often difficult to distinguish individual components if the specimen contains a population of mixed structures such as in a cellular membrane. In an effort to understand the AFM images better, a correlative study between AFM and the well-established technique of transmission electron microscopy (TEM) was performed. Freeze-fractured replicas of adult rat atrial tissue were examined by both TEM and AFM. The same replicas were analysed and the same details were identified, which allowed a critical comparison of surface topography by both techniques. AFM images of large-scale subcellular structures (nuclei, mitochondria, granules) correlated well with TEM images. AFM images of smaller features and surface textures appeared somewhat different from the TEM images. This presumably reflects the difference in the surface sensitivity of AFM versus TEM, as well as the nature of images in AFM (3-D surface contour) and TEM (2-D projection). AFM images also provided new information about the replica itself. Unlike TEM, it was possible to examine both sides of the replica with AFM; the resolution on one side was significantly greater compared with the other side. It was also possible to obtain quantitative height information which is not readily available with TEM.     

Scanning electron microscopy studies of protein-functionalized atomic force microscopy cantilever tips

Protein-functionalized atomic force microscopy (AFM) tips have been used to investigate the interaction of individual ligand-receptor complexes. Herein we present results from scanning electron microscopy (SEM) studies of protein-functionalized AFM cantilever tips. The goals of this study were (1) to examine the surface morphology of protein-coated AFM tips and (2) to determine the stability of the coated tips. Based on SEM images, we found that bovine serum albumin (BSA) in solution spontaneously adsorbed onto the surface of silicon nitride cantilevers, forming a uniform protein layer over the surface. Additional protein layers deposited over the initial BSA-coated surface did not significantly alter the surface morphology. However, we found that avidin-functionalized tips were contaminated with debris after a series of force measurements with biotinylated agarose beads. The bound debris presumably originated from the transfer of material from the agarose bead. This observation is consistent with the observed deterioration of functional activity as measured in ligand-receptor binding force experiments.     

Image comparisons of snow and ice crystals photographed by light (video) microscopy and low-temperature scanning electron microscopy

Light (video) microscopy and low-temperature scanning electron microscopy (SEM) were used to examine and record images of identical precipitated and metamorphosed snow crystals as well as glacial ice grains. Collection procedures enabled numerous samples from distant locations to be shipped to a laboratory for storage and/or observation. The frozen samples could be imaged with a video microscope in the laboratory at ambient temperatures or with the low-temperature SEM. Stereo images obtained by video microscopy or low-temperature SEM greatly increased the ease of structural interpretations. The preparation procedures that were used for low-temperature SEM did not result in sublimation or melting. However, this technique did provide far greater resolution and depth of focus over that of the video microscope. The advantage of resolution was especially evident when examining the small particles associated with rime and graupel (snow crystals encumbered with frozen water droplets), whereas the greater depth of focus provided clearer photographs of large crystals such as depth hoar, and ice. Because the SEM images contained only surface information while the video images were frequently confounded by surface and internal information, the SEM images also clarified the structural features of depth hoar crystals and ice grains. Low-temperature SEM appears to have considerable promise for future investigations of snow and ice.     

Ultrastructure of Trypanosoma cruzi revisited by atomic force microscopy

Most advances in atomic force microscopy (AFM) have been accomplished in recent years. Previous attempts to use AFM to analyze the organization of pathogenic protozoa did not significantly contribute with new structural information. In this work, we introduce a new perspective to the study of the ultrastructure of the epimastigote form of Trypanosoma cruzi by AFM. Images were compared with those obtained using field emission scanning electron microscopy of critical point dried cells and transmission electron microscopy of negative stained detergent-extracted and air-dried cells. AFM images of epimastigote forms showed a flagellum furrow separating the axoneme from the paraflagellar rod (PFR) present from the emergence of the flagellar pocket to the tip of the flagellum. At high magnification, a row of periodically organized structures, which probably correspond to the link between the axoneme, the PFR and the flagellar membrane were seen along the furrow. In the origin of the flagellum, two basal bodies were identified. Beyond the basal bodies, small periodically arranged protrusions, positioned at 400 nm from the flagellar basis were seen. This structure was formed by nine substructures distributed around the flagellar circumference and may correspond to the flagellar necklace. Altogether, our results demonstrate the importance of the application of AFM in the structural characterization of the surface components and cytoskeleton on protozoan parasites.     

The structure of proteoglycan aggregate determined by atomic force microscopy

Proteoglycan aggregate is the major extracellular matrix component in cartilage, comprising about 18% of the dry weight of hyaline cartilage. The proteoglycan aggregate is the major substance in cartilage which resists compression in the joint. The purpose of this study was to utilize the newly developed imaging technique, Atomic force Microscopy (AFM), to visualize the ultrastructure of proteoglycan aggregates. The proteoglycan aggregate molecules were imaged in air using the tapping mode of the AFM. The images illustrated the ultrastructure of the aggregates, especially the individual proteoglycan and the core hyaluronic acid. In addition to the length and width of each molecule, the height of the proteoglycan aggregates and the individual proteoglycans could be directly measured. The images of the ultrastructures of proteoglycan aggregates visualized from the AFM are comparable with those using conventional electron microscopy approaches. Nevertheless, the sample preparation for AFM imaging does not involve fixation, staining, coating, and other routine procedures required for traditional electron microscopy imaging. Thus, this technique could be a simple alternative approach for future analysis of proteoglycan aggregate and its assembly.     

Atomic force microscopy imaging of fragments from the Martian meteorite ALH84001

A combination of scanning electron microscopy (SEM) and environmental scanning electron microscopy (ESEM) techniques, as well as atomic force microscopy (AFM) methods has been used to study fragments of the Martian meteorite ALH84001. Images of the same areas on the meteorite were obtained prior to and following gold/palladium coating by mapping the surface of the fragment using ESEM coupled with energy-dispersive X-ray analysis. Viewing of the fragments demonstrated the presence of structures, previously described as nanofossils by McKay et al . (Search for past life on Mars — possible relic biogenic activity in martian meteorite ALH84001. Science , 1996, pp. 924–930) of NASA who used SEM imaging of gold-coated meteorite samples. Careful imaging of the fragments revealed that the observed structures were not an artefact introduced by the coating procedure.     

Climbing the steps of viral atomic force microscopy: visualization of Dengue virus particles

In recent years, the application of atomic force microscopy (AFM) to biological systems has highlighted the potential of this technology. AFM provides insights into studies of biological structures and interactions and can also identify and characterize a large panel of pathogens, including viruses. The Flaviviridae family contains a number of viruses that are important human and animal pathogens. Among them, Dengue virus causes epidemics with fatal outcomes mainly in the tropics. In this study, Dengue virus is visualized for the first time using the in air AFM technique. Images were obtained from a potassium-tartrate gradient-purified virus. This study enhances the application of AFM as a novel tool for the visualization and characterization of virus particles. Because flavivirus members are closely related, studies of the morphologic structure of the Dengue virus can reveal strategies that may be useful to identify and study other important viruses in the family, including the West Nile virus.     

Scanning probe microscopy studies of cereal seed storage protein structures

Scanning probe microscopes (SPMs) share a number of common features which give the techniques advantages over conventional light and electron microscopy. First, high resolution, up to the atomic level, is possible in certain cases, and second, they are nondestructive, requiring no staining or coating and the images can be obtained in the hydrated state or under water. Scanning probe microscopes, particularly scanning tunnelling microscopes (STM) and atomic force microscopes (AFM), have been used to study food-related systems, ranging from relatively large structures such as starch granules to the organisation of secondary structures in proteins and the interaction of proteins. The seed storage proteins (gluten) of wheat are responsible for the viscous and elastic properties of wheat doughs that allow them to be used for a wide range of different food products. Using AFM and STM, images of individual and groups of proteins have been obtained in both the dry and hydrated states. The ability to work in liquid environments allows the conformation of proteins to be determined under conditions approaching “native.” The AFM and STM have been used to image both gliadins and glutenins and to study their aggregative behaviour in relation to gluten and dough systems.     

Molecular dynamics of DNA and nucleosomes in solution studied by fast-scanning atomic force microscopy

Nucleosome is a fundamental structural unit of chromatin, and the exposure from or occlusion into chromatin of genomic DNA is closely related to the regulation of gene expression. In this study, we analyzed the molecular dynamics of poly-nucleosomal arrays in solution by fast-scanning atomic force microscopy (AFM) to obtain a visual glimpse of nucleosome dynamics on chromatin fiber at single molecule level. The influence of the high-speed scanning probe on nucleosome dynamics can be neglected since bending elastic energy of DNA molecule showed similar probability distributions at different scan rates. In the sequential images of poly-nucleosomal arrays, the sliding of the nucleosome core particle and the dissociation of histone particle were visualized. The sliding showed limited fluctuation within ∼50 nm along the DNA strand. The histone dissociation occurs by at least two distinct ways: a dissociation of histone octamer or sequential dissociations of tetramers. These observations help us to develop the molecular mechanisms of nucleosome dynamics and also demonstrate the ability of fast-scanning AFM for the analysis of dynamic protein–DNA interaction in sub-seconds time scale.     

Imaging of RNA in situ hybridization by atomic force microscopy

In this study we investigated the possibility of imaging internal cellular molecules after cytochemical detection with atomic force microscopy (AFM). To this end, rat 9G and HeLa cells were hybridized with haptenized probes for 28S ribosomal RNA, human elongation factor mRNA and cytomegalovirus immediate early antigen mRNA. The haptenized hybrids were subsequently detected with a peroxidase-labelled antibody and visualized with 3,3'-diaminobenzidine (DAB). The influence of various scanning conditions on cell morphology and visibility of the signal was investigated. In order to determine the influence of ethanol dehydration on cellular structure and visibility of the DAB precipitate, cells were kept in phosphate-buffered saline (PBS) and scanned under fluid after DAB development or dehydrated and subsequently scanned dry or submerged in PBS. Direct information on the increase in height of cellular structures because of internally precipitated DAB and the height of mock-hybridized cells was available. Results show that internal DAB precipitate can be detected by AFM, with the highest sensitivity in the case of dry cells. Although a relatively large amount of DAB had to be precipitated inside the cell before it was visible by AFM, the resolution of AFM for imaging of RNA– in situ hybridization signals was slightly better than that of conventional optical microscopy. Furthermore, it is concluded that dehydration of the cells has irreversible effects on cellular structure. Therefore, scanning under fluid of previously dehydrated samples cannot be considered as a good representation of the situation before dehydration.     

Spectroscopy and atomic force microscopy of biomass

Scanning probe microscopy has emerged as a powerful approach to a broader understanding of the molecular architecture of cell walls, which may shed light on the challenge of efficient cellulosic ethanol production. We have obtained preliminary images of both Populus and switchgrass samples using atomic force microscopy (AFM). The results show distinctive features that are shared by switchgrass and Populus. These features may be attributable to the lignocellulosic cell wall composition, as the collected images exhibit the characteristic macromolecular globule structures attributable to the lignocellulosic systems. Using both AFM and a single case of mode synthesizing atomic force microscopy (MSAFM) to characterize Populus, we obtained images that clearly show the cell wall structure. The results are of importance in providing a better understanding of the characteristic features of both mature cells as well as developing plant cells. In addition, we present spectroscopic investigation of the same samples.     

Structure‐dependent behaviours of skin layers studied by atomic force microscopy

The multilayer skin provides the physical resistance and strength against the environmental attacks, and consequently plays a significant role in maintaining the mammalian health. Currently, optical microscopy (OM) is the most common method for the research related to skin tissues while with the drawbacks including the possibility of changing the native morphology of the sample with the addition of the chemical or immunological staining and the restricted resolution of images for the direct observation of the tissue structures. To investigate if the function of each tissue is structure‐dependent and the how the injured skin returns to the intact condition, we applied atomic force microscopy (AFM) on the sectioned mice‐skin to reveal the tissue structures with a nanoscale resolution. From the outermost stratum to the inner layer of the skin tissue, the respectively laminated, fibrous, and brick‐like structures were observed and corresponded to various functions. Due to the mechanical differences between the tissue constituents and their boundaries, the sizes and arrangements of the components were characterised and quantified by the mechanical mapping of AFM, which enabled the analytical comparisons between tissue layers. For the wound model, the skin tissues were examined with the initial formation of blood vessels and type‐I collagen, which agreed with the stage of healing process estimated by OM but showed more detail information about the evolution of proteins among the skin. In conclusion, the characterisation of the components that consist of skin tissue by AFM enables the connection of the tissue function to the corresponded ultrastructure.     

Effect of glutaraldehyde fixation on bacterial cells observed by atomic force microscopy

Atomic force microscopy (AFM) is a promising microscopy technique that can provide high-resolution images of bacterial cells without fixation. Three species of bacteria, Xanthomonas campestris, Pseudomonas syringae, and Bacillus subtilis, were used in this study. AFM images were obtained from unfixed and glutaraldehyde-fixed cells, and cell height was measured. The mean height of bacterial cells prepared by fixation was higher than that of those prepared by nonfixation. However, the height changes were different between Gram-negative and Gram-positive bacteria: the mean height of two fixed Gram-negative bacteria, X. campestris and P. syringae, increased by 112.31 and 84.08%, respectively, whereas Gram-positive bacterium, B. subtilis, increased only by 38.79%. The results above indicated that glutaraldehyde fixation could affect the measured height of cells imaged by AFM; further more, the effect of glutaraldehyde fixation on the measured height of Gram-negative bacterial cells imaged by AFM seemed much more than on that of Gram-positive bacterial cells.     

Identification of bacteria by studying one section under light microscopy,scanning, and transmission electron microscopy

A method for bacterial identification has been developed by means of studying the same histological sections through several types of microscopy. With this method, one section was processed and analyzed respectively for light microscopy (LM), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Sections of gingival biopsies were Gram stained and bacteria tentatively identified by LM. Photographs of the sections were taken and presketched transparent acetate sheets (PTAS) were made from the photos. The same section was later prepared for SEM, areas previously thought to contain bacteria were localized by placing the PTAS onto the SEM monitoring screen. The SEM specimens were subsequently processed for TEM, bacteria were located, and micrographs obtained. The results showed that out of ten diseased gingival biopsies observed under the LM, bacteria were found to be present in all the specimens and were identified as both Gram positive and Gram negative. By transferring the section from LM to SEM, the bacteria could be relocated and their morphotype (cocci, rods, etc.) clearly identified in most of the cases. Since cocci may resemble other biological granular structures under SEM, they require further analysis under TEM for additional positive identification. This study demonstrated that the method described here is a useful tool for assessing the presence and identifying bacteria within the gingival tissues.     

Characterization of polymer thin films by phase-sensitive acoustic microscopy and atomic force microscopy: a comparative review

The potential of phase-sensitive acoustic microscopy (PSAM) for characterizing polymer thin films is reviewed in comparison to atomic force microscopy (AFM). This comparison is based on results from three-dimensional vector contrast imaging and multimodal imaging using PSAM and AFM, respectively. The similarities and differences between the information that can be derived from the AFM topography and phase images, and the PSAM phase and amplitude micrographs are examined. In particular, the significance of the PSAM phase information for qualitative and quantitative characterization of the polymer films is examined for systems that generate surface waves, and those that do not. The relative merits, limitations and outlook of both techniques, individually, and as a complementary pair, are discussed.     

Defocusing microscopy

Transparent objects (phase objects) are not visible in a standard brightfield optical microscope. In order to see such objects the most used technique is phase-contrast microscopy. In phase-contrast microscopy the contrast observed is proportional to the optical path difference introduced by the object. If the index of refraction is uniform, phase-contrast microscopy then yields a measure of the thickness profile of phase objects. We show that by slightly defocusing an optical microscope operating in brightfield, phase objects become visible. We modeled such an effect and show that the image contrast of a phase object is proportional to the amount of defocusing and proportional to the two-dimensional Laplacian of the optical path difference introduced by the object. For uniform index of refraction, defocusing microscopy then yields a measure of the curvature profile of phase objects. We extended our previous model for thin objects to thick objects. To check our theoretical model, we use as phase objects polystyrene spherical caps and compare their curvature radii obtained by defocusing microscopy (DM) to those obtained with atomic force microscopy (AFM). We also show that for thick curved phase objects one can reconstruct their thickness profiles from DM images. We illustrate the utility of defocusing microscopy in biological systems to study cell motility. In particular, we visualize and quantitatively measure real-time cytoskeleton curvature fluctuations of macrophages (a cell of the innate immune system). The study of such fluctuations might be important for a better understanding of the engulfment process of pathogens during phagocytosis.     

Visualizing filamentous actin on lipid bilayers by atomic force microscopy in solution

The surface structure of actin filaments (F-actin) was visualized at high resolution, by atomic force microscopy (AFM) in aqueous solution, in large paracrystals prepared on positively charged lipid monolayers. The increased stability of these closely packed specimens allowed us to show that both the long pitch (38 nm) and the monomer (5.8 nm) can be directly resolved by AFM in the contact mode. The right-handed helical surface, distinguishable in high resolution images, was compared with reconstructed models based on electron microscopy. The height of the rafts, a measure of the actin filament diameter, was 10 ± 1 nm, whereas the smaller inter-filament distance, 8 ± 1 nm, was consistent with interdigitation of the filaments. The 10 ± 1 nm F-actin diameter is in good agreement with the results of fibre X-ray diffraction. As such specimens are relatively easy to prepare without specialized equipment, this method may allow the study of the thin filaments in which F-actin-associated proteins are also present.