Voltammetric determination of norepinephrine in the presence of acetaminophen using a novel ionic liquid/multiwall carbon nanotubes paste electrode

A novel multiwall carbon nanotubes (MWCNTs) modified carbon ionic liquid electrode (CILE) was fabricated and used to investigate the electrochemical behavior of norepinephrine (NP). MWCNTs/CILE was prepared by mixing hydrophilic ionic liquid, 1-methyl-3-butylimidazolium bromide (MBIDZBr), with graphite powder, MWCNTs, and liquid paraffin. The fabricated MWCNTs/CILE showed great electrocatalytic ability to the oxidation of NE. The electron transfer coefficient, diffusion coefficient, and charge transfer resistant (R_ct) of NE at the modified electrode were calculated. Differential pulse voltammetry of NE at the modified electrode exhibited two linear dynamic ranges with slopes of 0.0841 and 0.0231 μA/μM in the concentration ranges of 0.3 to 30.0 μM and 30.0 to 450.0 μM, respectively. The detection limit (3σ) of 0.09 μM NP was achieved. This modified electrode exhibited a good ability for well separated oxidation peaks of NE and acetaminophen (AC) in a buffer solution, pH 7.0. The proposed sensor was successfully applied for the determination of NE in human urine, pharmaceutical, and serum samples.     

Multi-walled carbon nanotube modified carbon paste electrode as an electrochemical sensor for the determination of epinephrine in the presence of ascorbic acid and uric acid

A biocompatible electrochemical sensor for selective detection of epinephrine (EP) in the presence of 1000-fold excess of ascorbic acid (AA) and uric acid (UA) was fabricated by modifying the carbon paste electrode (CPE) with multi-walled carbon nanotubes (MWCNTs) using a casting method. The electro-catalytic activity of the modified electrode for the oxidation of EP was investigated. The current sensitivity of EP was enhanced to about five times upon modification. A very minimum amount of modifier was used for modification. The voltammetric response of EP was well resolved from the responses of AA and UA. The electrochemical impedance spectroscopic (EIS) studies reveal the least charge transfer resistance for the modified electrode. The AA peak that is completely resolved from that of EP at higher concentrations of AA and the inability of the sensor to give an electrochemical response for AA below a concentration of 3.0 × 10^? 4 M makes it a unique electrochemical sensor for the detection of EP which is 100% free from the interference of AA. Two linear dynamic ranges of 1.0 × 10^? 4–1.0 × 10^? 5 and 1.0 × 10^? 5–5.0 × 10^? 7 M with a detection limit of 2.9 × 10^? 8 M were observed for EP at modified electrode. The practical utility of this modified electrode was demonstrated by detecting EP in spiked human blood serum and EP injection. The modified electrode is highly reproducible and stable with anti fouling effects.     

Electrocatalytic oxidation and differential pulse voltammetric determination of sulfamethoxazole using carbon nanotube paste electrode

The use of a carbon-nanotube paste electrode provides an effective means for the determination of sulfamethoxazole. A decrease of ca. 110 mV in the overpotential for the oxidation of sulfamethoxazole compared to a traditional carbon paste electrode is reported along with greatly enhanced signal-to-noise characteristics. The oxidation process was found to be dependent on the pH of the supporting electrolyte. Under the optimized conditions the calibration plots are linear in the concentration range of 0.35–30 μg mL^? 1 with slope of 0.0955 μA/μg mL^? 1, LOD 0.1 μg mL^? 1 and LOQ 0.33 μg mL^? 1. Application of the method for the determination of the drug in the form tablet or suspension, without any interference, from the excipients, resulted in acceptable deviation from the stated concentrations.     

Electrochemical sensor for selective determination of N-acetylcysteine in the presence of folic acid using a modified carbon nanotube paste electrode

In the present paper, a novel benzoylferrocene (BF) modified carbon nanotube paste electrode (BFCNPE) was prepared. The modified electrode was further used for the successful determination of N-acetylcysteine (NAC), and it showed an excellent electrocatalytic oxidation activity toward NAC with a lower overvoltage, pronounced current response, and good sensitivity. Under the optimized experimental conditions, the proposed electrochemical NAC sensor exhibited a linear calibration plot that ranged from 3.0 × 10^? 7 to 7.0 × 10^? 4 M with a detection limit of 9.0 × 10^? 8 M. Also, Square wave voltammetry (SWV) was used for simultaneous determination of NAC and folic acid (FA) at the modified electrode. Finally, the proposed method was applied to the determination of NAC in NAC tablets.     

Selective determination of sucrose based on electropolymerized molecularly imprinted polymer modified multiwall carbon nanotubes/glassy carbon electrode

A novel and selective electrochemical sensor was successfully developed for the determination of sucrose by integrating electropolymerization of molecularly imprinted polymer with multiwall carbon nanotubes. The sensor was prepared by electropolymerizing of o-phenylenediamine in the presence of template, sucrose, on a multiwall carbon nanotube-modified glassy carbon electrode. The sensor preparation conditions including sucrose concentration, the number of CV cycles in the electropolymerization step, pH of incubation solution, extraction time of template from the imprinted film and the incubation time were optimized using response surface methodology (RSM). A mixture of acetonitrile/acetic acid was used to remove the template. Hexacyanoferrate(II) was used as a probe to characterize the sensor using electrochemical impedance spectroscopy, cyclic voltammetry and differential pulse voltammetry. Capturing of sucrose by the modified electrode causes decreasing the response of the electrode to hexacyanoferrate(II). Calibration curve was obtained in the sucrose concentration range of 0.01–10.0 mmol L^? 1 with a limit of detection 3 μmol L^? 1. This sensor provides an efficient way for eliminating interferences from compounds with similar structures to sucrose. The sensor was successfully used to determine sucrose in sugar beet juices with satisfactory results.     

Highly selective and sensitive voltammetric sensor based on modified multiwall carbon nanotube paste electrode for simultaneous determination of ascorbic acid,acetaminophen and tryptophan

A carbon-paste electrode modified with multiwall carbon nanotubes (MWCNTs) was used for the sensitive and selective voltammetric determination of ascorbic acid (AA) in the presence of 3,4-dihydroxycinnamic acid (3,4-DHCA) as mediator. The mediated oxidation of AA at the modified electrode was investigated by cyclic voltammetry (CV), chronoamperommetry and electrochemical impedance spectroscopy (EIS). Also, the values of catalytic rate constant (k), and diffusion coefficient (D) for AA were calculated. Using square wave voltammetry (SWV), a highly selective and simultaneous determination of AA, acetaminophen (AC) and tryptophan (Trp) has been explored at the modified electrode. The modified electrode displayed strong function for resolving the overlapping voltammetric responses of AA, AC and Trp into three well-defined voltammetric peaks. In the mixture containing AA, AC and Trp, the three compounds can well separate from each other with potential differences of 200, 330 and 530 mV between AA and AC, AC and Trp and AA and Trp, respectively, which was large enough to determine AA, AC and Trp individually and simultaneously.     

Selective voltammetric determination of norepinephrine in the presence of acetaminophen and tryptophan on the surface of a modified carbon nanotube paste electrode

A new electrochemical sensor for the determination of norepinephrine (NE), acetaminophen (AC) and tryptophan (TRP) is described. The sensor is based on carbon paste electrode (CPE) modified with 5-mino-3′,4′-dimethyl-biphenyl-2-ol (5ADB) and takes the advantages of carbon nanotubes (CNTs), which makes the modified electrode highly sensitive for the electrochemical detection of these compounds. Under the optimum pH of 7.0, the oxidation of NE occurs at a potential about 170 mV less positive than that of the unmodified CPE. Also, square wave voltammetry (SWV) was used for the simultaneous determination of NE, AC and TRP at the modified electrode.     

Preparation and biodistribution of tyrosine modified multiwall carbon nanotubes

The functional modification of the outer surface of carbon nanotubes (CNTs) is likely to improve their biocompatibility. Therefore, CNTs have attracted great attention not only in electrical, optical and mechanical applications but also in biological and pharmaceutical applications. Thus, it is important to examine the biodistribution and kinetics of the carbon-based nanotubes when they are introduced into living systems. Here, we synthesized and characterized tyrosine-functionalized carbon nanotubes (CNTs-Tyr), and assessed the biodistribution profile of CNTs-Tyr in mice, following three different administrations by the 125I radioisotope tracer method. CNTs-Tyr was delivered quickly around the entire body, and different absorbtion and biodistribution profiles of CNTs-Tyr were observed with different routes of administration. Following intravenous injection, CNTs-Tyr accumulated within 24 h mainly in the lungs and slightly in the spleen and liver, and may be eliminated primarily through the kidneys. After administration via gavage, most of the CNTs-Tyr were eliminated through the intestine, and rarely delivered into the organs. After intraperitoneal injection, CNTs-Tyr accumulated in the spleen and were rapidly eliminated from the other organs within 24 h. The blood circulation half-life of CNTs-Tyr was about 4.4 h. The behavior of CNTs-Tyr in mice is somewhat different from the results reported previously. This suggests that the functionalized group may affect the affinity of carbon nanotubes for particular organs. The results provide basic biological information for the biomedical application and risk assessment of CNTs.     

Electrocatalytic oxidation of guanine and DNA on a carbon paste electrode modified by cobalt hexacyanoferrate films

The electrochemical behavior of cobalt hexacyanoferrate complex adsorbed on a carbon paste electrode (CPE) and its application to the electrocatalytic oxidation of guanine and single-strand DNA (ss-DNA) in aqueous solution are investigated in this report. The modification of CPE by the adsorption of this complex results in excellent amplification of the guanine oxidation response of ss-DNA. The effects of paste composition, scan rate, DNA, and guanine concentration were studied. The detection limits of 52 and 920 ng mL(-)(1) were obtained for guanine and ss-DNA, respectively.     

Simultaneous determination of 3,4-dihydroxyphenylacetic acid, uric acid and ascorbic acid by poly(L-arginine)/multi-walled carbon nanotubes composite film

The poly(L-Arginine)(PArg)-multiwalled carbon nanotubes (MWCNTs) composite film was used to modify glassy carbon electrode (GCE) to fabricate PArg/MWCNTs/GCE through electropolymerization of L-Arginine on MWCNTs/GCE. The PArg/MWCNTs/GCE exhibited high electro-catalytic activities towards the oxidation of 3,4-dihydroxyphenylacetic acid (DOPAC), uric acid (UA), and ascorbic acid (AA), and could be sensitively used for simultaneous determination of DOPAC, AA, and UA in pH 7.4 phosphate-buffered solution (PBS).The linear ranges were 7 microM to 2.7 mM for DOPAC, 3 microM to 1.2 mM for UA, and 70 microM to 1.4 mM for AA. The detection limits were 1.3 microM for DOPAC, 0.7 microM for UA and 20 microM for AA.     

Carbon-Pt nanoparticles modified TiO2 nanotubes for simultaneous detection of dopamine and uric acid

The present work describes sensing application of modified TiO2 nanotubes having carbon-Pt nanoparticles for simultaneous detection of dopamine and uric acid. The TiO2 nanotubes electrode was prepared using anodizing method, followed by electrodeposition of Pt nanoparticles onto the tubes. Carbon was deposited by decomposition of polyethylene glycol in a tube furnace to improve the conductivity. The C-Pt-TiO2 nanotubes modified electrode was characterized by cyclic voltammetry and differential pulse voltammetry methods. The modified electrode displayed high sensitivity towards the oxidation of dopamine and uric acid in a phosphate buffer solution (pH 7.00). The electro-oxidation currents of dopamine and uric acid were linearly related to the concentration over a wide range of 3.5 x 10(-8) M to 1 x 10(-5) M and 1 x 10(-7) M to 3 x 10(-5) M respectively. The limit of detection was determined as 2 x 10(-10) M for dopamine at signal-to-noise ratio of 3. The interference of uric acid was also investigated. Electro-oxidation currents of dopamine in the presence of fix amount of uric acid represented a linear behaviour towards successive addition of dopamine in range of 1 x 10(-7) M to 1 x 10(-5) M. Furthermore, in a solution containing dopamine, uric acid and ascorbic acid the overlapped oxidation peaks of dopamine and ascorbic acid could be easily separated by using C-Pt-TiO2 nanotubes modified electrode.     

Direct electrochemical determination of ascorbic acid by a cobalt(II) tetra-neopentyloxy phthalocyanine-multi-walled carbon nanotubes glassy carbon electrode

A cobalt(II) tetra-neopentyloxy phthalocyanine-multi-walled carbon nanotubes (CoTNPPc–MWNTs) composite was synthesized and characterized by UV–Vis spectra and transmission electron microscopy. The CoTNPPc–MWNTs glassy carbon electrode (CoTNPPc–MWNTs/GCE) was prepared by drop coating. The electrocatalytic performance of the chemically modified electrode was investigated for oxidation of ascorbic acid (AA). It was found that in phosphate buffer solution at pH = 6.60, the chemically modified electrode exhibited excellent electrocatalytic activity toward the oxidation of AA. The oxidation peak current increased linearly with the concentration of AA in the range of 10 μM–1.6 mM within the detection limit of 5 μM and low response time of 4 s.     

Synthesis and characterization of Rosebengal/folicacid-functionalized multiwall carbon nanotubes

Multiwall carbon nanotubes (MWCNTs) were functionalized with a photosensitizer, rosebengal (RB), and folicacid (FA), an anti-cancer drug simultaneously and individually, which was characterized with various analytical instruments like Fourier Transform Iinfrared (FTIR) spectroscopy, UV–Vis spectroscopy, Thermogravimetric analysis (TGA), Photoluminescence (PL) spectroscopy, X-ray photoelectron spectroscopy (XPS), and Transmission electron microscopy (TEM). FTIR spectra confirmed the chemical modification of MWCNT. The chemical functionalization of MWCNT with RB was further supported by UV–Vis and PL spectra.     

Dye sensitized solar cell based on platinum decorated multiwall carbon nanotubes as catalytic layer on the counter electrode

In this study we have employed multiwall carbon nanotubes (MWCNT), decorated with platinum as catalytic layer for the reduction of tri-iodide ions in dye sensitized solar cell (DSSC). MWCNTs have been prepared by a simple one step pyrolysis method using ferrocene as the catalyst and xylene as the carbon source. Platinum decorated MWCNTs have been prepared by chemical reduction method. The as prepared MWCNTs and Pt/MWCNTs have been characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). In combination with a dye adsorbed TiO₂ photoanode and an organic liquid electrolyte, Pt/MWCNT composite showed an enhanced short circuit current density of 16.12 mA/cm² leading to a cell efficiency of 6.50% which is comparable to that of Platinum.     

槲皮素在分子印迹聚合物修饰碳糊电极上的电化学行为及测定

建立分子印迹聚合物修饰碳糊电极测定药物中槲皮素含量的新方法。以槲皮素为模板分子,甲基丙烯酸为功能单体,偶氮二异丁腈为引发剂,乙二醇二甲基丙烯酸酯为交联剂,通过沉淀聚合法制得槲皮素分子印迹聚合物,以m(石墨+聚合物):m(石蜡)=4∶1比例混合制成的印迹聚合物修饰碳糊电极作为工作电极。在0 V富集150 s,然后从0~0.6 V以100 m V/s扫速线性扫描,记录其在0.338 V的峰电流。槲皮素物质量浓度在1.25×10-6~4.0×10-5 mol/L与峰电流呈良好的线性关系(r=0.995 0),检出限为4.72×10-8mol/L,应用该方法测定胶囊中槲皮素的含量,测得回收率为96.7%~105.6%。该修饰电极具有较高的选择性和灵敏度,可用于槲皮素的测定。     

Effect of carbon nanotubes shape on the properties of multiwall carbon nanotubes/polyethylene flexible transparent conductive films

Transparent conductive material is used in a wide range of applications and is particularly interesting. In the present work, a series of multiwall carbon nanotubes/low density polyethylene nanocomposites with different carbon nanotubes were prepared via solution casting method. The optical transparency, morphology, and resistivity of transparent conductive films have been characterized by using UV–Vis Spectrophotometer, Field emission scanning electron microscope and Multimeter, respectively. Their electrically conductive and optically transparent properties were studied and compared. The result showed that thinner and longer multiwall carbon nanotubes were more suitable for the fabrication of flexible transparent conductive nanocomposites. The sample filled with 1 wt% of T.1 (outside diameter <8 nm, length 10–30 μm) had good transparent conductive properties (volume conductivity of 3.12 × 10^?3 S m^?1 and optical transmittance of 62.8 % at the light wavelength of 600 nm). The high volume conductivity and optical transparency demonstrated that such kind of nanocomposite films had favorable potential in the applications from electromagnetic interference shielding to transparent electrodes.     

Mesogenicity drives fractionation in lyotropic aqueous suspensions of multiwall carbon nanotubes

We describe a simple method for separating carbon nanotubes on the basis of their mesogenicity by fractionating biphasic aqueous suspensions within the Flory chimney of the lyotropic phase diagram. Macroscopic phase separation occurs on centrifuging the biphasic nanotube suspension or allowing it to stand. Long, straight nanotubes with higher mesogenicity (liquid crystalline forming ability) segregate preferentially to the liquid crystalline phase, whereas shorter nanotubes and impurities with lower mesogenicity segregate preferentially to the isotropic phase.     

Effect of nitrogen and hydrogen on the growth of multiwall carbon nanotubes on flexible carbon cloth using thermal chemical vapor deposition

In this study, the effect of various mixture fluxes of nitrogen (N₂) and hydrogen (H₂) on carbon nanotube (CNT) synthesis grown on flexible carbon cloth using thermal chemical vapor deposition (thermal CVD) with ethylene (C₂H₄) as the carbon source and nickel (Ni) as the catalyst was investigated. Field emission scanning electron microscopy (FE-SEM) was utilized to study the morphology of CNTs on flexible carbon cloths with various N₂ and H₂ inlet flow rates. The results indicate that average diameter of MWCNTs decreases with increasing H₂ and N₂ flow rates; however, the density of CNTs increases first and then decreases with increasing H₂ and N₂ flow rates. On the other hand, in our field emission experiments, the result indicates that the field emission is strongly dependent on the density and geometry of MWCNTs. In addition, we also found that the contact electrical conductance measurement is an easy method to predict the field emission characteristics of MWCNTs.     

Modified carbon paste electrode for potentiometric determination of diquat dibromide pesticide in water and urine samples

A carbon paste electrode for diquat dibromide (Dq.2Br) was prepared and fully characterized in terms of composition, usable pH range, response time and temperature. The electrode was applied to the potentiometric determination of diquat ions in water and urine samples with average recoveries of 97.5-104.0% and relative standard deviations of 0.30-4.73%. The electrode is based on the ion pair, namely, diquat-phosphotungstate dissolved in 2-nitrophenyloctyl ether (2-NPOE) as pasting liquid with 1.0% Na-TPB as an additive. The modified electrode showed a near-Nernstian slope of 30.8 mV over the concentration range of 3.8 × 10^− 6to 1.0 × 10^− 3 M with the limit of detection 9.0 × 10^− 7 over the pH range 4.5-9.5. The electrode exhibits good selectivity for Dq cations with respect to a large number of inorganic cations, organic cations, sugars and amino acids. The proposed potentiometric method offers the advantages of simplicity, accuracy, automation feasibility and applicability to turbid and colored sample solutions.