共查询到20条相似文献,搜索用时 140 毫秒
1.
变电站数字物理混合仿真培训系统的一次系统采用计算机软件实时仿真(采用真实、不带电设备);二次系统采用与电力生产现场相同的真实变电站综合自动化设备。在软件仿真的一次系统和二次系统之间用信号转换装置和功率放大器相连接,一次设备和二次设备之间经电缆接通二次回路,实物与软件结合使培训更接近现场实际,培训功能更强大。 相似文献
2.
直流磁光变换器比直流电磁测量变换器(在含被测电流的电路和测量仪器之间有直接退耦)有着明显的优越性:由于它的价格和外形尺寸与额定电压无关,所以在200千伏或更高的电压下,磁光测量变换器技术经济指标很 相似文献
3.
4.
5.
介绍了一种基于"分流器+光纤传输"技术的高压直流电流传变系统。与利用铁芯线圈电磁效应的传统直流测量系统原理不同,该系统利用分流器测量直流电流,在高压侧把测量信号转换为光信号,利用光纤将信号从高压侧传输到低压侧,既克服了传统测量暂态性、抗饱和能力较差的缺点,又很好地解决了高低压侧之间的信号隔离问题。由分流器、导电连接等元件组成的一次电流传感器是该系统的关键组件,由于分流器输出为极易受干扰的毫伏级电压信号,在分析了温升、集肤效应、膨胀应力和结构设计等因素对测量精度所造成的影响后,提出了一次电流传感器的实现方案。最后,通过建模仿真和试验验证了该方案设计合理,精度、温升等主要指标满足我国高压直流传变系统的需求。 相似文献
6.
针对光伏中压直流变换器串联系统中光伏发电单元功率失配导致的变换器输出过电压及功率损失问题,分析了光伏直流变换器串联系统运行特性,推导了限电压控制下串联系统光伏功率损失与光伏发电单元功率不均衡度及变换器输出电压限幅值之间的关系;提出了改进型Boost全桥隔离功率模块拓扑及其调制策略,基于功率模块输入并联输出串联形成模块级联型直流变换器,通过占空比灵活调节,实现直流变换器宽输出电压范围运行,解决直流变换器调压能力不足导致的功率损失问题;针对光伏直流变换器串联系统复杂运行工况,提出了串联系统直流变换器自适应电压分段式控制策略,实现了串联系统直流变换器多模式自适应稳定运行。研制了3kV/80kW功率模块及20kV/500kW光伏中压直流变换器,基于3台直流变换器输出串联实现了光伏中压直流变换器串联升压并网系统实证应用,现场实验结果验证了所提直流变换器拓扑方案的可行性与控制策略的有效性。 相似文献
7.
建立了一种用于混合储能系统的隔离型多端口双向直流变换器的数学模型。通过星-网变换建立了移相控制下直流变换器多端口网型等效电路,通过扩展状态平均法建立了N端口变换器在电感电流连续时的状态平均模型和小信号模型,并分析了各端口之间传输的功率。仿真比较了不同端口数下变换器的模型输出和拓扑输出,并以三端口变换器为例,分析了移相比扰动下的模型和拓扑电路的动态响应。结果表明,提出的多端口直流变换器的数学模型能够准确反映移相控制下多端口变换器的稳态性能和动态性能,且对于不同端口数量的直流变换器具有普遍适用性。 相似文献
8.
随着特高压柔性直流输电等应用的发展,电网对柔性直流系统控制与保护提出更快速更准确的响应需求,因而要求直流电压测量装置具备高可靠性、高速、高精度等特性。针对特高压直流电压测量装置的二次分压及数字采集部分进行深入研究,一方面提出具备冗余设计及精度补偿功能的二次分压板结构拓扑,另一方面提出了高速高精度低延时的就地数字化信号采集方案。应用该技术的±800 kV直流电压测量装置实际测试结果表明:测量精度优于0.2级;50 Hz频率响应比差优于1%,相差小于500μs;截止频率高于3 kHz。 相似文献
9.
介绍了霍尔变换器的工作原理 ,结合实际应用分析了几种采用霍尔变换器测量直流大电流的原理、方法、性能特点和适用范围 ,为铝电解工业生产选择直流大电流测量装置提供了依据。 相似文献
10.
11.
设计了一个由可调半波片和集成偏振敏感光学元件组成的六端口光学混频器。通过在本征光通道中引入可调节半波片,使六端口光学混频器可实现良好的相位不平衡误差补偿。给出了混频器的工作原理和相位不平衡误差的补偿理论,并研究了其输出特性。结果表明,所设计的六端口光学混频器可实现较宽范围的相位不平衡补偿,并且经补偿后的正交信号相位不平衡量小于0.5o,应用在同差激光多普勒测振系统中实现了nm级振动信息的检测。 相似文献
12.
混合式光电电流互感器(HOCT)高压侧供电方案一直是HOCT技术实用化、产业化的一个关键和难点。该文介绍了HOCT的基本原理、结构并给出了几种HOCT高压侧的供电方案,对各种方案进行了比较评价,指出了各种方案在使用中的优劣,为高压侧供电方案实用化、产业化进行了有益的探讨。 相似文献
13.
14.
Pennings E. Khoe G.-D. Smit M.K. Staring T. 《IEEE journal of selected topics in quantum electronics》1996,2(2):151-164
We assess the relative merits and prospects of integrated-optics in comparison with microoptic and fiber-based techniques. Firstly, the market for fiber-optic components for telecommunications is analyzed. Secondly, the technological issues which make integrated optics quite different from integrated electronics will be discussed. Thirdly, a specific comparison between the potential of the competing optical technologies will be made for the polarization-diversity hybrid and the optical wavelength (de)multiplexer, two optical devices used in networks that are based on optical frequency division multiplexing (OFDM) 相似文献
15.
论述了基于真空灭弧室和SF6灭弧室串联的混合断路器开断能力提高的原理,分析了混合断路器两灭弧室的介质恢复过程。结合混合断路器开断能力提高的机理提出了混合断路器对其操动控制机构的要求,设计了一种基于真空灭弧室与SF6灭弧室串联的光控模块式混合断路器实验模型。实验模型能满足分析混合断路器中真空灭弧室与SF6灭弧室在不同时刻协同动作开断容量增益特性的要求,其协同动作时间分散性在微秒级。实验对比了SF6断路器与基于相同SF6灭弧室串联真空灭弧室的混合断路器短路电流开断能力,证明在不增加SF6气体使用量的前提下,混合断路器具有比SF6断路器更加优越的开断能力。 相似文献
16.
Shibata S. Yano T. Segawa H. 《IEEE journal of selected topics in quantum electronics》2008,14(5):1361-1369
Organic-inorganic hybrid materials are derived from the chemical reaction of silane coupling reagents and metal alkoxides, involving O-Si-C bonds in the matrix. They offer superior characters of combined organic groups and inorganic linkages for various optical applications. This paper reviews preparation and characterization of optical devices and materials derived from these hybrid materials. We mainly describe three topics for micrometer-nanometer scale optical components in our laboratories using organic-inorganic hybrid materials: 1) film formation; 2) patterning by the photolithography techniques; and 3) laser emission from dye-doped hybrid spheres and coated glass spheres. 相似文献
17.
18.
A simple and efficient adaptive mesh generation algorithm is proposed for the full-wave finite-element analysis of optical waveguides using edge/nodal hybrid elements. We employ a local weight defined by a difference between the fundamental and the higher order element solutions. This method can be used for both the guided-mode analysis and the beam-propagation analysis. To show the validity and usefulness of the present scheme, the guided-mode analysis of a rib waveguide and the beam-propagation analysis of a Y-branching polarization converter based on hybrid supermodes are performed 相似文献
19.
Krishnamoorthy A.V. Miller D.A.B. 《IEEE journal of selected topics in quantum electronics》1996,2(1):55-76
Technologies now exist for implementing dense surface-normal optical interconnections for silicon CMOS VLSI using hybrid integration techniques. The critical factors in determining the performance of the resulting photonic chip are the yield on the transceiver device arrays, the sensitivity and power dissipation of the receiver and transmitter circuits, and the total optical power budget available. The use of GaAs-AlGaAs multiple-quantum-well p-i-n diodes for on-chip detection and modulation is one effective means of implementing the optoelectronic transceivers. We discuss a potential roadmap for the scaling of this hybrid optoelectronic VLSI technology as CMOS linewidths shrink and the characteristics of the hybrid optoelectronic transceiver technology improve. An important general conclusion is that, unlike electrical interconnects, such dense optical interconnections directly to an electronic circuit will likely be able to scale in capacity to match the improved performance of future CMOS technology 相似文献
20.
Silica-based planar lightwave circuits 总被引:1,自引:0,他引:1
Silica-based planar lightwave circuits (PLC) provide various important devices for both optical wavelength-division-multiplexing networks and optical access network. This paper is an overview of recent progress in PLC technology including optical power splitters, arrayed-waveguide gratings, thermooptic switches, and hybrid integrated PLC's 相似文献