A high‐aperture‐ratio and low‐crosstalk pixel structure design for in‐plane‐switching‐mode TFT‐LCDs

Abstract— The TFT‐LCD market is growing rapidly, and the replacement of CRT TV by LCD TV requires the implementation of LC modes with wide viewing angles and high brightness. The IPS mode is an excellent technology to realize wide viewing angles, but it has a low aperture ratio that has now been improved by Advanced Super‐IPS (AS‐IPS). In this paper, we propose a novel pixel structure design that not only increases the aperture ratio but also reduces the crosstalk. We have improved the current AS‐IPS aperture ratio by 1.25 times and effectively reduced the capacitive coupling ratio from 1.2% to 0.05%.     

Single‐cell‐gap transflective liquid‐crystal display using double‐ and single‐mode approaches

Abstract— In this paper, many popular methods to study transflective liquid‐crystal‐displays (LCDs) have been discussed, and several new transflective LCD configurations with a single‐cell gap have been proposed. The traditional double‐cell‐gap method gives the best match of the transmittance/reflectance voltage curve (TVC/RVC) and also the widest viewing angle, but also brings the highest fabrication complexity. The single‐cell‐gap transflective LCD is much easier to fabricate and also shows a good match of TVC/RVC. A new methodology has been shown to find optimal configurations for single‐cell‐gap transflective LCDs. New configurations using multimode in a single pixel include twisted nematic (TN) optically compensated bend (OCB), TN electrically controlled birefringence (ECB), and TN low‐twisted nematic (LTN). TN and hybrid‐aligned nematic (HAN) modes have been investigated for single‐mode transflective LCDs. The results exhibit high contrast ratio, a good match of TVC/RVC, as well as wide viewing angle.     

Solution‐processed oxide semiconductors for low‐cost and high‐performance thin‐film transistors and fabrication of organic light‐emitting‐diode displays

Abstract— High‐performance solution‐processed oxide‐semiconductor (OS) thin‐film transistors (TFTs) and their application to a TFT backplane for active‐matrix organic light‐emitting‐diode (AMOLED) displays are reported. For this work, bottom‐gated TFTs having spin‐coated amorphous In‐Zn‐O (IZO) active layers formed at 450°C have been fabricated. A mobility (μ) as high as 5.0 cm²/V‐sec, ?0.5 V of threshold voltage (VT), 0.7 V/dec of subthreshold swing (SS), and 6.9 × 10⁸ of on‐off current ratio were obtained by using an etch‐stopper (ES) structure TFT. TFTs exhibited uniform characteristics within 150 × 150‐mm² substrates. Based on these results, a 2.2‐in. AMOLED display driven by spin‐coated IZO TFTs have also been fabricated. In order to investigate operation instability, a negative‐bias‐temperature‐stress (NBTS) test was carried out at 60°C in ambient air. The IZO‐TFT showed ?2.5 V of threshold‐voltage shift (ΔVT) after 10,800 sec of stress time, comparable with the level (ΔVT = ?1.96 V) of conventional vacuum‐deposited a‐Si TFTs. Also, other issues regarding solution‐processed OS technology, including the instability, lowering process temperature, and printable devices are discussed.     

Pre‐filtering and post‐filtering in gain‐scheduled output‐feedback control

Linear matrix inequality (LMI) design conditions for gain‐scheduled output‐feedback control rely on assumptions constraining either system or controller matrices. Throughout the literature, it is common practice to avoid imposing restrictive assumptions on the controller, which may appear undesirable, in favor of state augmentations via pre‐filtering and post‐filtering to construct auxiliary augmented systems that comply with the alternative assumptions on the system matrices. This technique brings in the additional cost of increased state dimensions of the resulting gain‐scheduled output‐feedback controllers. In this paper, we explore the interplay and inherent trade‐offs between state augmentation, controller structure, and performance. We revisit LMI design conditions for quadratic output‐feedback control and demonstrate that state augmentation via pre‐filtering and post‐filtering in order to avoid constraints on the controller matrices is never advantageous even without taking into account the added complexity and propensity for numerical issues associated with state augmentation. As an additional contribution, we extend this observation to recently introduced modified LMI conditions allowing combined – however less restrictive – assumptions on system and controller matrices. Copyright © 2016 John Wiley & Sons, Ltd.     

Current‐mode ambient‐light sensing circuit using p‐type low‐temperature polycrystalline‐silicon TFTs and p‐i‐m diodes

Abstract— A current‐mode ambient‐light sensing circuit, which is composed of p‐intrinsic‐metal (p‐i‐m) diodes and p‐type low‐temperature polycrystalline‐silicon (LTPS) thin‐film transistors (TFTs) for autobrightness control of display panels. The proposed sensing circuit exhibits a wide dynamic range of 56 dB, while the output signal range is 1.8 times wider than that of a previously reported sensing circuit.     

Space‐in‐Time and Time‐in‐Space Self‐Organizing Maps for Exploring Spatiotemporal Patterns

Spatiotemporal data pose serious challenges to analysts in geographic and other domains. Owing to the complexity of the geospatial and temporal components, this kind of data cannot be analyzed by fully automatic methods but require the involvement of the human analyst's expertise. For a comprehensive analysis, the data need to be considered from two complementary perspectives: (1) as spatial distributions (situations) changing over time and (2) as profiles of local temporal variation distributed over space. In order to support the visual analysis of spatiotemporal data, we suggest a framework based on the “Self‐Organizing Map” (SOM) method combined with a set of interactive visual tools supporting both analytic perspectives. SOM can be considered as a combination of clustering and dimensionality reduction. In the first perspective, SOM is applied to the spatial situations at different time moments or intervals. In the other perspective, SOM is applied to the local temporal evolution profiles. The integrated visual analytics environment includes interactive coordinated displays enabling various transformations of spatiotemporal data and post‐processing of SOM results. The SOM matrix display offers an overview of the groupings of data objects and their two‐dimensional arrangement by similarity. This view is linked to a cartographic map display, a time series graph, and a periodic pattern view. The linkage of these views supports the analysis of SOM results in both the spatial and temporal contexts. The variable SOM grid coloring serves as an instrument for linking the SOM with the corresponding items in the other displays. The framework has been validated on a large dataset with real city traffic data, where expected spatiotemporal patterns have been successfully uncovered. We also describe the use of the framework for discovery of previously unknown patterns in 41‐years time series of 7 crime rate attributes in the states of the USA.     

High‐accuracy system for spectral measurement of small‐area‐contrast and low‐light‐level display screens

Abstract— A double‐monochromator spectroradiometer with a photon‐counting detector will be described. The system captures spectroradiometric data with near‐perfect linearity over six decades of intensity and with wavelength uncertainties of under 0.05 nm. It enables accurate measurement of spectral radiance data and small‐area contrast with an uncertainty less than 0.002 in chromaticity (x,y) and 2% in luminance for a typical CRT spectrum.     

Group‐in‐a‐Box Meta‐Layouts for Topological Clusters and Attribute‐Based Groups: Space‐Efficient Visualizations of Network Communities and Their Ties

An important part of network analysis is understanding community structures like topological clusters and attribute‐based groups. Standard approaches for showing communities using colour, shape, rectangular bounding boxes, convex hulls or force‐directed layout algorithms remain valuable, however our Group‐in‐a‐Box meta‐layouts add a fresh strategy for presenting community membership, internal structure and inter‐cluster relationships. This paper extends the basic Group‐in‐a‐Box meta‐layout, which uses a Treemap substrate of rectangular regions whose size is proportional to community size. When there are numerous inter‐community relationships, the proposed extensions help users view them more clearly: (1) the Croissant–Doughnut meta‐layout applies empirically determined rules for box arrangement to improve space utilization while still showing inter‐community relationships, and (2) the Force‐Directed layout arranges community boxes based on their aggregate ties at the cost of additional space. Our free and open source reference implementation in NodeXL includes heuristics to choose what we have found to be the preferable Group‐in‐a‐Box meta‐layout to show networks with varying numbers or sizes of communities. Case study examples, a pilot comparative user preference study (nine participants), and a readability measure‐based evaluation of 309 Twitter networks demonstrate the utility of the proposed meta‐layouts.     

Epsilon‐shaped circularly polarized strip and slot‐loaded ultra‐wideband antenna for Ku‐band and K‐band

A compact epsilon‐shaped (ε) ultra‐wideband (UWB) antenna for dual‐wideband circularly polarized (CP) applications has been investigated in this article. It consists of a stepped stub loaded modified annular ring‐shaped radiator and modified CPW ground plane. The ground plane is loaded with two semicircular notches and a spiral‐shaped slot. The impedance bandwidth (IBW) is 97.02% (10.4‐30 GHz) along with an overall footprint of 20 × 20 mm². The fractional axial ratio bandwidth (3‐dB ARBW) for two wide bands is 38.50% (13.30‐19.64 GHz) and 6.45% (26.25‐28.00 GHz), respectively. The proposed antenna is left‐hand circularly polarized with a peak gain of about 5.09 and 5.14 dB in both 3‐dB ARBW bands. The proposed antenna is dominating other reported CP antenna structures in terms of number of CP bands, 3‐dB ARBW, IBW, peak gain, and dimensions.     

Input‐to‐state‐stability‐type comparison principles and input‐to‐state stability for discrete‐time dynamical networks with time delays

This paper investigates the input‐to‐state stability (ISS) issue for discrete‐time dynamical networks (DDNs) with time delays. Firstly, a general comparison principle for solutions of DDNs is proposed. Then, based on this general comparison principle, three kinds of ISS‐type comparison principles for DDNs are established, including the comparison principle for input‐to‐state ‐stability, ISS, and exponential ISS. The ISS‐type comparison principles are then used to investigate stability properties related to ISS for three kinds (linear, affine, and nonlinear) of DDNs. It shows that the ISS property of a DDN can be derived by comparing it with a linear or lower‐dimension DDN with known ISS property. By using methods such as variation of parameters, uniform M‐matrix, and the ISS‐type comparison principle, conditions of global exponential ISS for time‐varying linear DDNs with time delays are derived. Moreover, the obtained ISS results for DDNs are extended to the hybrid DDNs with time delays. As one application, the synchronization within an error bound in the sense of ISS is achieved for DDNs with coupling time delays and external disturbances. Finally, two examples are given to illustrate the results. Copyright © 2011 John Wiley & Sons, Ltd.     

Analysis and design of peer‐assisted video‐on‐demand services

We propose a deterministic fluid model to understand the trade‐offs in the design of peer‐assisted video‐on‐demand (VoD) services. There are three entities in this model: peers (or end users), seeders (altruistic users that own one or several complete video items), and cache servers that store and forward videos with a limited capacity. Peers join the network, download one or multiple concurrent video streams (possibly different video items), and abort the system when they wish. Peers are assumed to cooperate in a BitTorrent‐based fashion, governed by tit‐for‐tat and fair availability. The issue is to minimize the expected downloading times, choosing the set of video items that should be stored in each cache server. We first prove that the deterministic model is globally stable, and find closed expressions for the expected waiting times. Then, we introduce a combinatorial optimization problem (COP), whose nature is similar to the multiknapsack problem (where the items are videos, and knapsacks are related with the storage of cache servers). The problem turns out to be NP‐complete. Therefore, we heuristically address the problem following a GRASP (greedy randomized adaptive search procedure) methodology. Finally, we simulate the new caching methodology with real‐life traces taken from YouTube logs. The results suggest that the peer‐to‐peer philosophy is both stable and cost‐effective for on‐demand streaming purposes.     

Photoalignment and photo‐patterning of planar and homeotropic liquid‐crystal‐display configurations

Abstract— Optical alignment and micro‐patterning of the alignment of liquid‐crystal displays (LCDs) by linear photopolymerization (LPP) technology renders high‐quality multi‐domain twisted‐nematic (TN) and supertwisted‐nematic (STN) displays with broad fields of view over wide temperature ranges feasible. The prerequisites are the generation of photo‐induced high‐resolution azimuthal alignment patterns with defined bias‐tilt angles 0° ≤ θ ≤ 90°. For the first time, LPP‐aligned single‐ and dual‐domain vertically aligned nematic LCDs (VAN‐LCDs) are presented. Dual‐domain VAN‐LCDs are shown to exhibit broad fields of view which are further broadened by combining the displays with LPP‐aligned optical compensators made of liquid‐crystal polymers.     

Bag‐of‐words‐driven,single‐camera simultaneous localization and mapping

This paper describes BoWSLAM, a scheme for a robot to reliably navigate and map previously unknown environments, in real time, using monocular vision alone. BoWSLAM can navigate challenging dynamic and self‐similar environments and can recover from gross errors. Key innovations allowing this include new uses for the bag‐of‐words image representation; this is used to select the best set of frames from which to reconstruct positions and to give efficient wide‐baseline correspondences between many pairs of frames, providing multiple position hypotheses. A graph‐based representation of these position hypotheses enables the modeling and optimization of errors in scale in a dual graph and the selection of only reliable position estimates in the presence of gross outliers. BoWSLAM is demonstrated mapping a 25‐min, 2.5‐km trajectory through a challenging and dynamic outdoor environment without any other sensor input, considerably farther than previous single‐camera simultaneous localization and mapping (SLAM) schemes. © 2010 Wiley Periodicals, Inc.     

Reflecting on Connecting: Meta‐Analysis of Differences Between Computer‐Mediated and Face‐to‐Face Self‐Disclosure

Self‐disclosure is a key concept in computer‐mediated communication (CMC) theory and research, but disagreement exists about the impact of CMC, relative to face‐to‐face (FtF) communication, on self‐disclosure. We conducted a meta‐analysis of studies comparing self‐disclosure in CMC and FtF communication to summarize and clarify existing research. We also examined potential moderators of this difference—measure of self‐disclosure, study design (survey or experiment), interaction context (task or social), type of CMC (text‐based or video‐based), and interaction length. Overall, self‐disclosure was higher in FtF communication than in CMC. Measure of self‐disclosure, study design, and type of CMC moderated this difference. Findings suggest mixed support for predictions derived from key CMC theories and a need for CMC theory to more explicitly address self‐disclosure.     

Carbon fiber‐based deca‐port multiple‐input‐multiple‐output antenna with pattern diversity and high inter‐element isolation

In this article, a deca‐port carbon fiber‐based multiple‐input‐multiple‐output (MIMO) antenna with pattern diversity is presented. The radiating elements of the proposed antenna consist of low cost, light weight, environmental friendly graphite material. The 10 radiating elements of the MIMO antenna are arranged in a group of two (termed as sub‐MIMO structure), in a cubical manner to cover all the propagating directions. Furthermore, the two carbon fiber‐based radiating elements of the sub‐MIMO structure are placed in an orthogonal arrangement to generate different radiation patterns. The antenna exhibits high inter‐element isolation and low envelope correlation coefficient due to orthogonal placement of the radiating elements. The antenna is fabricated and the measured results confirm that the proposed MIMO/diversity antenna may be useful for vehicle‐to‐network applications. The MIMO performance parameters such as diversity gain, total active reflection coefficient, mean effective gain, channel capacity loss are evaluated and found within suitable limits. The three‐dimensional pattern diversity helps to communicate in all directions.     

Model‐to‐model and model‐to‐text: looking for the automation of VigilAgent

VigilAgent is a methodology for the development of agent‐oriented monitoring applications that uses agents as the key abstraction elements of the involved models. It has not been developed from scratch, but it reuses fragments from Prometheus and INGENIAS methodologies for modelling tasks and the ICARO framework for implementation purposes. As VigilAgent intends to automate as much as possible the development process, it exploits. Model transformation techniques are one of the key aspects of the model‐driven development approach. A model‐to‐model transformation is used to facilitate the interoperability between Prometheus and INGENIAS methodologies. Also, a model‐to‐text transformation is performed to generate ICARO code from the INGENIAS model. A case study based on access control is used to illustrate the fundamentals of the model‐to‐model and model‐to‐text transformations implemented in VigilAgent.     

Evaluation of single‐, pre‐emphasis,and dual‐driving methods in large‐sized TFT‐LCDs

Abstract— As the panel size and the frame frequency of TFT‐LCDs increases, driving issues become much more important for larger‐sized and higher‐resolution TFT‐LCDs. In our previous paper, the pre‐emphasis driving method was proposed to shorten the driving time of the data line with heavy loads of the large‐sized TFT‐LCDs. This paper proposes a simulation model based on the evaluation results of the developed pre‐emphasis source driver, and the issues of driving the data line with heavy loads are reviewed. The single‐, pre‐emphasis, and dual‐driving methods are compared in terms of their driving time and power consumption for large‐sized TFT‐LCDs with various resistances and capacitances of the data lines. At a panel load of 250‐pF capacitance and 15‐kΩ resistance in full‐HD resolution, the pre‐emphasis driving can reduce the pixel driving time to 66% with a 54% increase in the analog power consumption.     

Electro‐optical characteristics of ion‐beam‐aligned FFS‐LCDs on diamond‐like‐carbon thin film

Abstract— A fringe‐field‐switching (FFS) mode cell having LC alignment has been developed by using a non‐rubbing method, a ion‐beam‐alignment method on a‐C:H thin film, to analyze the electro‐optical characteristics of this cell. The suitable inorganic thin film for FFS‐LCDs and the alignment capabilities of nematic liquid crystal (NLC) have been studied. An excellent voltage‐transmittance (V‐T) and response‐time curve for the ion‐beam‐aligned FFS‐LCDs were observed using oblique ion‐beam exposure on DLC thin films.     

Viewing‐angle compensation of TN‐ and ECB‐LCD modes by using a rod‐like liquid‐crystalline polymer film

Abstract— A liquid‐crystal line retardation‐film technology by using a rod‐like liquid‐crystalline polymer (LCP) for various LCD modes have been developed. In particular, considerable improvements in viewing‐angle performance have been achieved for the twisted‐nematic (TN) and the transmissive/transflective electrically controlled birefringence (ECB) modes by using hybrid aligned nematic film (NH Film).