共查询到20条相似文献,搜索用时 140 毫秒
1.
2.
日照市日广中心A塔楼采用钢筋混凝土框架-核心筒结构体系,结构高度178.45m,为B级高度的高层建筑.主要介绍了工程结构特点、结构选型、超限情况、斜柱分析,并提出相应的加强措施.采用PKPM和MIDAS Building两种软件对结构进行了多遇地震作用下的整体计算,并采用弹性时程分析法进行补充验算.采用等效弹性分析法进行了抗震性能化设计,保证主要构件在设防地震和罕遇地震作用下的性能要求.罕遇地震作用下,采用SAUSAGE软件对结构进行动力弹塑性时程分析,保证了结构大震不倒并找到薄弱部位进行加强.分析结果表明,结构具有良好的抗震性能,能够实现"三水准"抗震设防目标. 相似文献
3.
益中花园1#楼为一超高层住宅,地上50层,建筑高度177.85m,采用全部落地剪力墙结构体系,超过B级最大适用高度18.5%。针对结构高度超限,采取了现行规范要求更为严格的抗震措施。采用SATWE、PMSAP、ETABS程序对结构进行多遇地震作用下的计算并对整体结构进行了弹性动力时程补充计算和罕遇地震作用下静力弹塑性分析。结果表明,工程抗震性能较好,结构体系安全可行。 相似文献
4.
晋江世茂人工湖项目(K1-3、K2-2地块)M-1#楼为一栋36层超高层办公楼,建筑高度为145.30米,采用框架-核心筒结构体系。针对结构高度超限,采取了基于性能的抗震设计和比现行规范要求更为严格的抗震措施,采用SATWE、PMSAP程序对结构进行多遇地震作用下的计算,并对整体结构进行了弹性动力时称补充计算和旱遇地震作用下的静力弹塑性分析。结果表明,工程抗震性能良好,结构体系安全可靠。 相似文献
5.
6.
7.
8.
9.
合理的结构体系和抗震性能设计是超高层建筑结构设计的关键。扬中金源大广场2#楼采用典型的部分框支剪力墙结构体系,建筑高度为118.5m,为高度B级的超限高层建筑;同时存在高度超限、扭转不规则、刚度突变、构件间断4项不规则项。首先介绍了场地条件、基础设计和结构选型,讨论了结构超限情况,在上述基础上,确定了结构抗震性能目标;随后开展了多遇地震作用下的弹性分析、设防地震和罕遇地震作用下的关键构件验算与弹塑性分析,在各个水准地震作用下,结构各项性能指标均能达到预期抗震性能目标的要求;最后,针对高度、扭转和刚度突变等超限问题,提出了计算与设计措施。 相似文献
10.
11.
12.
晓庄国际广场工程为一栋高层多塔商住楼,地上30层,建筑高度104 m,部分框支剪力墙结构,属超限高层建筑。介绍了工程的特点和结构设计情况,并针对高位转换和结构超限,采取了基于性能的抗震设计和比现行规范要求更为严格的抗震措施。经对结构进行多模型、多软件及线性和非线性结构分析,结果表明,结构的工作状态和性能均能达到设计的预期性能目标和规范要求。 相似文献
13.
Urban reforestation is advocated as an efficient countermeasure to the intensification of urban heat islands. The greening and beautification of residential quarters is one of the main concerns of residents, while lighting and ventilation are two main energy-consuming building services. Hence, the tree layout in green space between buildings is important, and it is necessary to determine the relationships between trees and buildings. This study takes Shanghai as a case study to optimize tree design between residential buildings and meet good daylighting requirements. Models were made using software such as AutoCAD and SketchUp. The relationships between maximum tree height and building separation were determined. For the same building layout, there were different tree height limits according to crown shape; the order of decreasing height limits was cylindrical, conical, spherical, and inverted conical crowns. Three cases having different green space between building layouts were studied. Their maximum tree heights differed. Overall, our model helps us realize good daylighting of a building environment. The formula allows us to determine which trees to plant between buildings in that we can predict the effects of future tree growth on building daylighting. 相似文献
14.
本工程位于上海商业圈,总高度为23.75 m,采用钢筋混凝土框架结构,部分梁为预应力梁。结构有多处不规则,如竖向收进、转换、楼板开大洞等,属于超限结构。本文介绍了此结构的设计分析过程,并采用了SATWE和PMSAP两个程序对其进行了多遇地震作用下的反应谱计算和动力弹性时程补充计算。结果表明,结构抗震性能良好,体系安全可行。 相似文献
15.
上海环球金融中心大厦结构高度492m,地上101层,高宽比8.49,拟建成为世界上结构高度最高的建筑。该建筑总高和高宽比都超过了我国《高层建筑混凝土结构技术规程》(JGJ 3—2002)所规定的限值,为研究该超限的复杂超高层结构体系的抗震性能,进行了1∶50比例的微粒混凝土整体模型的地震模拟振动台试验,得到了结构在7度多遇、7度基本、7度罕遇和8度罕遇地震作用下结构的动力特性、动力反应以及结构的破坏型式。利用ANSYS对结构进行了有限元分析,并与试验数据进行了对比,对比结果表明试验与理论分析结果吻合良好。研究得到:该结构体系在7度多遇至7度中震地震作用下结构自振频率基本不变,结构基本处于弹性阶段;在7度大震作用下,结构自振频率有所下降,最大层间位移角满足规范的弹塑性变形要求;在8度大震作用下,结构局部出现混凝土开裂和压碎现象,但能维持结构不倒塌的工作状态。综合研究结果表明该结构体系满足小震不坏、中震可修、大震不倒的抗震设防要求。 相似文献
16.
重庆国汇中心酒店楼为高度超限的复杂高层建筑结构,本文一方面介绍了该工程的常规"二阶段设计"过程,另一方面将基于性能抗震设计理念应用到芯筒加强区剪力墙、加强层桁架等关键构件的抗震设计中,提出了核心筒剪力墙"中震弹性"和加强层伸臂桁架"中震不屈服"的性能指标,计算分析表明,这样设计能够有效提高整个建筑的抗震性能.该文基于性能的抗震设计思路可为同类工程提供有意义的参考. 相似文献
17.
莆田市某住宅工程,主体结构总高度144.45m,为高度超限结构,采用钢筋混凝土剪力墙结构。本文简要介绍了该工程的特点,重点介绍了结构整体计算分析的内容、结果以及针对超限所采取的措施。 相似文献
18.
宁波市商会.国贸中心由A,B两幢塔楼和裙房组成,塔楼A高度207.0m,塔顶为层层内收的莲花瓣造型。工程结构存在大底盘、多塔楼、平面及竖向不规则和高位转换等多项不利因素,属于复杂高层建筑结构。结构设计时从抗震概念设计出发,采用多种计算方法进行分析,并采取有针对性的抗震加强措施。重点介绍了塔楼A结构的超限分析和抗震处理措施。 相似文献
19.
Jianguang Shi Linlin Hua Tong Han 《The Structural Design of Tall and Special Buildings》2011,20(6):661-668
Architecture project design is a key stage to tall building design because its structure form, structure system and main member dimension may be determined, and the possibility to influence construction cost may attain 70–80% in this stage. Based on building conditions in architecture project design, such as building function, storeys, height, length/width ratio, height/width ratio, floor height and the maximum wind pressure, seismic intensity and site type, one of the estimation methods for building structure behaviour under these combined action is presented. In this method, every storey in the building is taken as a macro‐element. The member in the building, such as beams, columns, walls and slabs, are included in the macro‐element. Considering the contribution of each member, the macro‐element stiffness is established for each storey. Then, the estimation analysis of the building structure is carried out following the finite element method. Comparing the analysis results, such as internal force and storey deformation with the usual analysis method, it is known that this estimation analysis method can be used to estimate the behaviour of the building structure system in architecture project design. It is also a useful tool to architects and structure engineers in estimating the applicability of the structure system. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
20.
石家庄农业科技研发中心工程地下2层,地上分为主楼和裙楼两部分,主楼地上26层,主体高度97.450m,框架-核心筒结构,裙楼地上4层,主体高度20.450m,框架结构。主裙楼地上部分设变形缝,地下连为一体,在主裙楼连接处采用了Y形分叉柱。重点介绍了主楼结构地震动计算参数的确定和主要计算指标、主楼裙楼基础连为一体的设计、Y形分叉柱的设计等内容,可作为类似工程的参考。 相似文献