共查询到18条相似文献,搜索用时 187 毫秒
1.
微细阵列方形轴孔的电火花和电化学组合加工工艺研究 总被引:3,自引:1,他引:2
对微细阵列轴孔的电火花、电化学组合加工工艺进行了分析和研究.用微细电火花线切割机加工出3×3至10×10系列方形阵列电极,宽度在25~90 μm, 加工中采用降低加工电压、加工电流、进给速度和减小工作液冲击等方法,获得了质量较好的阵列电极,并分别利用微细电化学加工和微细电火花加工两种工艺方法进行阵列孔加工.在加工过程中通过适度间歇抬刀、超声振动、循环流动工作液等方法,较好地解决了微弧放电、排屑、加工区温度过高等加工难题,获得了质量较好的大小在30~100 μm相应的阵列孔,从而实现了微细阵列轴孔的电火花、电化学组合加工,为大规模微细阵列轴孔的加工开辟了高效、可行的新工艺方法. 相似文献
2.
3.
4.
微细电加工要达到工业应用的目的,需兼顾加工效率和加工精度两方面的要求.以微细孔、微细三维结构的加工为目标,进行了微细孔电火花加工、三维微细结构电火花伺服扫描加工及微细电化学加工技术的研究开发.设计出微细电极的损耗补偿进给和导向机构,开发出三维微细结构的电火花伺服扫描加工工艺,研究了采用阵列微细电极的微细电化学加工方法.微细孔电火花加工可连续加工直径小至100 μm的孔.伺服扫描电火花加工可便捷地在小于1 mm2区域内加工出三维微细结构.提出的微细电化学加工技术路线拟将微细电解加工应用于阵列微细孔和三维微细结构的加工. 相似文献
5.
6.
7.
8.
9.
10.
11.
Apiwat Muttamara Yasushi Fukuzawa Naotake Mohri Takayuki Tani 《Journal of Materials Processing Technology》2003,140(1-3):243-247
Electrical discharge machining (EDM) is used as a precision machining method for the electrically conductive hard materials with a soft electrode material. But recently we succeeded to machine on insulating material by EDM. The technology is named as an assisting electrode method. The EDMed surface is covered with the electrical conductive layer during discharge. The layer holds the electrical conductivity during discharge. For micro-EDM, the wear of tool electrode becomes lager ratio than the normal machining. So the micro-machining is extremely difficult to get the precision sample.
In this paper to obtain a fine and precise ceramics sample, some trials were carried out considering the EDM conditions, tool electrodes material and assisting electrode materials. Insulating Si3N4 ceramics were used for workpiece. The machining properties were estimated by the removal rate and tool wear ratio. To confirm the change of micro-machining process, the discharge waveforms were observed. The micro-machining of the Ø0.05 mm hole could be machined with the commercial sinking electrical discharge machine. 相似文献
12.
Yan-Cherng Lin Ho-Shiun Lee 《International Journal of Machine Tools and Manufacture》2008,48(11):1179-1186
The gap conditions of electrical discharge machining (EDM) would significantly affect the stability of machining progress. Thus, the machining performance would be improved by expelling debris from the machining gap fast and easily. In this investigation, magnetic force was added to a conventional EDM machine to form a novel process of magnetic force-assisted EDM. The beneficial effects of this process were evaluated. The main machining parameters such as peak current and pulse duration were chosen to determine the effects on the machining characteristics in terms of material removal rate (MRR), electrode wear rate (EWR), and surface roughness. The surface integrity was also explored by a scanning electron microscope (SEM) to evaluate the effects of the magnetic force-assisted EDM. As the experimental results suggested that the magnetic force-assisted EDM facilitated the process stability. Moreover, a pertinent EDM process with high efficiency and high quality of machined surface could be accomplished to satisfy modern industrial applications. 相似文献
13.
14.
提出了压电陶瓷(piezoelectric ceramic transducer,PZT)激励同步压缩放电通道微细电火花加工,目的在于改善微细电火花加工的放电环境。介绍了PZT激励同步压缩放电通道微细电火花加工原理,研究了开路电压、脉冲宽度、脉冲频率和峰值电流对其电极损耗和材料去除率的影响,并与不采用压缩通道方法的微细电火花加工进行了对比。结果表明:同等条件下,采用PZT激励同步压缩放电通道技术,提高了加工过程的稳定性和材料去除率,降低了电极损耗率,有效改善了放电环境。 相似文献
15.
16.
17.
综述了日本在放电加工领域的最新研究动态,包括成形放电加工、微细放电加工和线切割放电加工三部分内容。在成形放电加工方面,主要介绍一项新技术——气中放电高速三维空腔铣的原理、实验装置及加工效果;在微细放电加工方面,主要介绍一种新近开发的可同时加工微细轴和微孔的自动微孔加工装置和目前已加工出的微细轴的最小尺寸;在线切割放电加工方面,主要介绍了提高圆角加工精度的新方法、提高放电位置可控性的新方法和新的硅锭切片方法。 相似文献