Mechanistic Analysis of Drug Release from Theophylline Pellets Coated by Films Containing Pectin,Chitosan and Eudragit® RS

The objective of this study was to obtain detailed information on the mechanism of drug release from mixed-film of pectin-chitosan/Eudragit® RS. Pellets (710–840 μm in diameter) containing 60% theophylline and 40% microcrystalline cellulose were prepared by extrusion-spheronization method. Eudragit® L100-55 enteric coating capsules included film-coated pellets of theophylline in theoretical coating weight gains of 10, 15, and 20%, with pectin-chitosan complex contents of 5, 10, 15, and 20% for each level of weight gain were prepared and subjected to in vitro drug release. Drug release from this system showed a bimodal release profile characteristic with the drug release enhancement, being triggered (burst release) in the colonic medium. The reason for burst drug release may be due to the enzymatic degradation of pectin via pectinolytic enzymes in the simulated colonic medium. The mechanism of drug release from each formulation was evaluated in the terms of zero-order, first-order, Higuchi and Korsmeyer-Peppas models. It was observed that none of the enteric coating capsules showed any drug release in the simulated gastric medium (phase I). The analysis of release profiles showed that zero-order kinetics was found as the better fitting model for all formulations in the simulated small intestine (phase II) and it could be due to the pectin-chitosan swelling and subsequent formation of aqueous channels. In the colonic medium (phase III), due to degradation of pectin and its leaching from the mixed-film, there was a modification in drug release kinetics from swelling-controlled at phase II to anomalous at phase III. It also was found that both zero-order and Higuchi models contributed in colonic drug release from most of the formulations.     

Colonic drug delivery: influence of cross-linking agent on pectin beads properties and role of the shell capsule type

For colonic delivery, pectin beads obtained by ionotropic gelation method have been already reported as an interesting approach. This study investigated the influence of the cross-linking agent (calcium or zinc) and the type of shell capsule used (classical or enteric capsules) on pectin beads properties and on their performance to target the colon (in vitro dissolution studies with subsequent pH change to mimic overall gastro-intestinal tract). Zinc pectinate beads seemed to be relatively similar to calcium's ones in morphological point, except on the surface aspect. When beads were introduced in classical hard capsules, ketoprofen release was not significantly different between CPG and ZPG beads, and it was too premature and too quick due to a chemical erosion of the pectinate matrix (acid + basic attacks). However, zinc pectinate beads showed slower ketoprofen release compared with calcium pectinate beads when enteric hard capsules were used. This interesting finding could be due to the strength of the network formed during the process between the zinc cations and the LM-pectin following the “egg-box” model. This network was stronger and induced a reduction of swelling and hydration when contact with dissolution medium, then subsequently a decrease of drug release. Thus, the zinc pectinate beads could protect sufficiently drug entrapped from the upper gastro-intestinal conditions and drug release will be controlled by pectin degradation with colonic microflora. Finally, these zinc pectinate beads in enteric hard capsules are promising as a carrier for specific colonic delivery of drugs after oral administration.     

In Vitro Performance of Floating Sustained-Release Capsule of Verapamil

Abstract

Capsules filled with mixtures of verapamil, hydroxypropoxyl cellulose (HPC), and effervescent are proposed to provide floating sustained release over 10 hr. The effects of weight filled in the capsule, amount of HPC, and the addition of effervescent on the dissolution kinetics are studied. The conventional capsules were filled with different amounts and weights of the mixtures of verapamil, HPC, and effervescent. The release of verapamil from the capsules followed the Higuchi release model. However, when effervescent was added, a zero-order drug release was observed after the burst phase. The conventional capsule, when filled with active ingredients, polymers, and effervescent, can achieve a zero-order release system. Entrapped air was considered as a barrier to diffusion and matrix relaxation in drug release.     

Colonic Drug Delivery: Influence of Cross-linking Agent on Pectin Beads Properties and Role of the Shell Capsule type

ABSTRACT

For colonic delivery, pectin beads obtained by ionotropic gelation method have been already reported as an interesting approach. This study investigated the influence of the cross-linking agent (calcium or zinc) and the type of shell capsule used (classical or enteric capsules) on pectin beads properties and on their performance to target the colon (in vitro dissolution studies with subsequent pH change to mimic overall gastro-intestinal tract). Zinc pectinate beads seemed to be relatively similar to calcium's ones in morphological point, except on the surface aspect. When beads were introduced in classical hard capsules, ketoprofen release was not significantly different between CPG and ZPG beads, and it was too premature and too quick due to a chemical erosion of the pectinate matrix (acid + basic attacks). However, zinc pectinate beads showed slower ketoprofen release compared with calcium pectinate beads when enteric hard capsules were used. This interesting finding could be due to the strength of the network formed during the process between the zinc cations and the LM-pectin following the “egg-box” model. This network was stronger and induced a reduction of swelling and hydration when contact with dissolution medium, then subsequently a decrease of drug release. Thus, the zinc pectinate beads could protect sufficiently drug entrapped from the upper gastro-intestinal conditions and drug release will be controlled by pectin degradation with colonic microflora. Finally, these zinc pectinate beads in enteric hard capsules are promising as a carrier for specific colonic delivery of drugs after oral administration.     

Development of novel spray coated soft elastic gelatin capsule sustained release formulations of nifedipine

Nifedipine release from coated commercially available immediate release soft elastic gelatin capsules was investigated. Capsules were spray coated using two different polymeric combinations, ethylcellulose and hydroxypropylmethylcellulose or pectin, at different coating loads. In vitro drug release studies were conducted in three different dissolution media: with gastric pretreatment, without gastric pretreatment, and in water to investigate the pH effect on nifedipine release. Convolution of in vitro dissolution data for selected formulations and commercially available sustained release nifedipine formulations showed that the tested formulations provided release profiles of nifedipine that are very promising in terms of desirable sustained release formulations.     

Experiment on formulation and drug release behavior of porosity asymmetric membrane capsules in vitro

Porosity asymmetric membrane capsules were prepared to study the relationship between the capsule formulation and drug release. Cellulose acetate (CA) and pore formers were used in the capsule shell formulation as the main semipermeable membrane material. The capsules were permeable to both water and dissolved solutes. Using sparingly soluble drug acetaminophen as a model, cumulative release was calculated. The slope of the release profile from the distilled water had good relationship with the concentration of the pore formers F68. The release of acetaminophen was independent to the pH, osmotic pressure of dissolution medium, but influenced by intensity of agitation. When the concentration of pore former was low, zero-order release behavior was observed within 24?h which was consistent with Fickian diffusion model. When the concentration of pore former was high, however, Higuchi model release was found which is caused by Fickian diffusion and osmotic pressure release. With scanning electron microscope (SEM), the surface structure and cross-section of the capsule shell were also studied before and after drug delivery. With simple preparation and broad scope of drug application, porosity asymmetric membrane capsules can give desired drug extended release and show more convenience than controlled tablets with laser drilling.     

Basic coating polymers for the colon-specific drug delivery in inflammatory bowel disease

During acute attacks of inflammatory bowel disease, the luminal pH of the colon decreases significantly. This drop in pH can be exploited by developing coated dosage forms with acid-soluble coating polymers to achieve topical drug delivery to the colon. Two batches of minitablets, a conventional and a swellable formulation, were prepared by direct compression and coated with different amounts of either Eudragit® E or AEA® in a small coating pan. The release of the model drug dexamethasone from the coated tablets was measured spectrophotometrically at pH 2.0, 4.0, 5.0, and 6.8 and different stirring rates (100-200 rpm) to simulate the influence of pH and hydrodynamic stress on drug release. In general, lag times of drug release, determined as the time points of a 5% drug release, were longer with AEA-coated cores compared to those coated with Eudragit E, resulting from a lower polymer dissolution rate and water permeability of this film. In low pH media, drug release was dependent on the stirring rate because the onset of drug release is determined by the time required for dissolution of the basic polymer films. At pH 6.8, lag times from nonswelling tablets coated with Eudragit E, for which drug release only begins after complete erosion of the polymer film, are not significantly affected by hydrodynamic stress. Drug release from AEA-coated cores is determined by the slow drug diffusion through the polymer film. Lag times from tablets with swelling properties, for which drug release is induced by disruption of the basic polymer films due to water penetration and subsequent core swelling, are not significantly affected by hydrodynamic stress. Additional coating layers such as an intermediate hydroxypropylcellulose (HPC) layer and an enteric outer layer do not influence the lag times of drug release, nor does a 2-hr pretreatment of the entire dosage form in acidic media.     

Oral sustained delivery of theophylline and cimetidine from in situ gelling pectin formulations in rabbits

The aim of this study was to evaluate the potential of an in situ gelling pectin formulation as a vehicle for the oral sustained delivery of theophylline and cimetidine. In vitro studies demonstrated diffusion-controlled release of theophylline from 1, 1.5, and 2% w/v pectin gels. Release of this drug from 1.5% w/v pectin gels formed in situ in rabbit stomach was sustained over a period of 12 hours giving a theophylline bioavailability some seven fold higher than when administered from a commercial syrup. In contrast, interactions between cimetidine and pectin led to weak gelation of the pectin sols that prevented any meaningful determination of in vitro release characteristics. Similarly, in vivo release profiles from pectin formulations containing cimetidine were similar to that from a solution of this drug in buffer, indicative of weak gelation. Examination of the content of the rabbit stomach 5 hours after administration of 1.5% w/v pectin sols containing drug confirmed gel formation, but gels containing cimetidine were noticeably softer than those containing theophylline.     

Effects of coating layer and release medium on release profile from coated capsules with Eudragit FS 30D: an in vitro and in vivo study

The aim of the present research was to evaluate the impact of coating layers on release profile from enteric coated dosage forms. Capsules were coated with Eudragit FS 30D using dipping method. The drug profile was evaluated in both phosphate buffer and Hank’s solutions. Utilization X-ray imaging, gastrointestinal transmission of enteric coated capsules was traced in rats. According to the results, no release of the drug was found at pH 1.2, and the extent of release drug in pH 6.8 medium was decreased by adding the coating layers. The results indicated single-layer coated capsules in phosphate buffer were significantly higher than that in Hank’s solution. However, no significant difference was observed from capsules with three coating layers in two different dissolution media. X-ray imaging showed that enteric coated capsules were intact in the stomach and in the small intestine, while disintegrated in the colon.     

Development of polysaccharide-based colon targeted drug delivery systems for the treatment of amoebiasis

The main focus of this study is to develop colon targeted drug delivery systems for metronidazole (MTZ). Tablets were prepared using various polysaccharides or indigenously developed graft copolymer of methacrylic acid with guar gum (GG) as a carrier. Various polysaccharides such as GG, xanthan gum, pectin, carrageenan, β-cyclodextrin (CD) or methacrylic acid-g-guar (MAA-g-GG) gum have been selected and evaluated. The prepared tablets were tested in vitro for their suitability as colon-specific drug delivery systems. To further improve the colon specificity, some selected tablet formulations were enteric coated with Eudragit-L 100 to give protection in an acidic environment. Drug release studies were performed in simulated gastric fluid (SGF) for 2 hr followed by simulated intestinal fluid (SIF) at pH 7.4. The dissolution data demonstrate that the rate of drug release is dependent upon the nature and concentration of polysaccharide/polymer used in the formulations. Uncoated tablets containing xanthan gum or mixture of xanthan gum with graft copolymer showed 30-40% drug release during the initial 4-5 hr, whereas for tablets containing GG with the graft copolymer, it was 70%. After enteric coating, the release was drastically reduced to 18-24%. The other polysaccharides were unable to protect drug release under similar conditions. Preparations with xanthan gum as a matrix showed the time-dependent release behavior. Further, in vitro release was performed in the dissolution media with rat caecal contents. Results indicated an enhanced release when compared to formulations studied in dissolution media without rat caecal contents, because of microbial degradation or polymer solubilization. The nature of drug transport was found to be non-Fickian in case of uncoated formulations, whereas for the coated formulations, it was found to be super-Case-II. Statistical analyses of release data indicated that MTZ release is significantly affected by the nature of the polysaccharide used and enteric coating of the tablet. Differential scanning calorimetry indicated the presence of crystalline nature of drug in the formulations.     

Oral Sustained Delivery of Theophylline and Cimetidine from In Situ Gelling Pectin Formulations in Rabbits

ABSTRACT

The aim of this study was to evaluate the potential of an in situ gelling pectin formulation as a vehicle for the oral sustained delivery of theophylline and cimetidine. In vitro studies demonstrated diffusion-controlled release of theophylline from 1, 1.5, and 2% w/v pectin gels. Release of this drug from 1.5% w/v pectin gels formed in situ in rabbit stomach was sustained over a period of 12 hours giving a theophylline bioavailability some seven fold higher than when administered from a commercial syrup. In contrast, interactions between cimetidine and pectin led to weak gelation of the pectin sols that prevented any meaningful determination of in vitro release characteristics. Similarly, in vivo release profiles from pectin formulations containing cimetidine were similar to that from a solution of this drug in buffer, indicative of weak gelation. Examination of the content of the rabbit stomach 5 hours after administration of 1.5% w/v pectin sols containing drug confirmed gel formation, but gels containing cimetidine were noticeably softer than those containing theophylline.     

The influence of polymeric subcoats and pellet formulation on the release of chlorpheniramine maleate from enteric coated pellets

The influences of aqueous polymeric subcoats and pellet composition on the release properties of a highly water-soluble drug, chlorpheniramine maleate (CPM), from enteric coated pellets were investigated. Three different aqueous polymeric subcoats, Eudragit® RD 100, Eudragit® RS 30D, and Opadry® AMB, were applied to 10% w/w CPM-loaded pellets that were then enteric coated with Eudragit® L 30D-55. Observed drug release from the coated pellets in acidic media correlated with water vapor transmission rates derived for the subcoat films. The influence of pellet composition on retarding the release of CPM from enteric coated pellets in 0.1 N HCl was investigated. The rate of drug release was greatest for pellets prepared with lactose, microcrystalline cellulose, or dibasic calcium phosphate compared with pellets formulated with citric acid and microcrystalline cellulose. Citric acid reduced the pellet micro-environmental pH, decreasing the amount of drug leakage in 0.1 N HCL during the first 2 hr of dissolution. Polymer flocculation was observed when CPM was added to the Eudragit L 30D-55 dispersion. An adsorption isotherm was generated for mixtures of CPM and the polymer and the data were found to fit the Freundlich model for adsorption. Adsorption of CPM to the polymer decreased with the addition of citric acid to the drug-polymer mixtures.     

Effect of simulated gastrointestinal conditions on drug release from pectin/ethylcellulose as film coating for drug delivery to the colon

The aim of this work was to investigate the effect of acidic pH representative of gastric fluid on the release of 5-aminosalicylic acid from beads coated with pectin/ethylcellulose as film coating intended for drug delivery to the colon, in media mimicking the lower gastrointestinal (GI) tract and representative of colonic conditions. In this work, the in vitro incubation of the beads in acid medium was found to influence the hydration and the swelling characteristics of pectin after transfer into simulated intestinal fluid and simulated cecal fluid containing pectinolytic enzymes. Moreover, the drug release profiles from the beads in simulated intestinal fluid after incubation for 2 h or 30 min in simulated gastric fluid vs. no acid incubation were found to be very different. The in vitro degradation of pectin in the coat by pectinolytic enzymes in simulated cecal fluid depended on whether the beads were placed in simulated gastric fluid prior to testing in simulated intestinal fluid. The percentage drug release also depended on the ratio of pectin to ethylcellulose in the coat.     

Effect of Simulated Gastrointestinal Conditions on Drug Release from Pectin/Ethylcellulose as Film Coating for Drug Delivery to the Colon

The aim of this work was to investigate the effect of acidic pH representative of gastric fluid on the release of 5-aminosalicylic acid from beads coated with pectin/ethylcellulose as film coating intended for drug delivery to the colon, in media mimicking the lower gastrointestinal (GI) tract and representative of colonic conditions. In this work, the in vitro incubation of the beads in acid medium was found to influence the hydration and the swelling characteristics of pectin after transfer into simulated intestinal fluid and simulated cecal fluid containing pectinolytic enzymes. Moreover, the drug release profiles from the beads in simulated intestinal fluid after incubation for 2 h or 30 min in simulated gastric fluid vs. no acid incubation were found to be very different. The in vitro degradation of pectin in the coat by pectinolytic enzymes in simulated cecal fluid depended on whether the beads were placed in simulated gastric fluid prior to testing in simulated intestinal fluid. The percentage drug release also depended on the ratio of pectin to ethylcellulose in the coat.     

Effect of Simulated Gastrointestinal Conditions on Drug Release from Pectin/Ethylcellulose as Film Coating for Drug Delivery to the Colon

The aim of this work was to investigate the effect of acidic pH representative of gastric fluid on the release of 5-aminosalicylic acid from beads coated with pectin/ethylcellulose as film coating intended for drug delivery to the colon, in media mimicking the lower gastrointestinal (GI) tract and representative of colonic conditions. In this work, the in vitro incubation of the beads in acid medium was found to influence the hydration and the swelling characteristics of pectin after transfer into simulated intestinal fluid and simulated cecal fluid containing pectinolytic enzymes. Moreover, the drug release profiles from the beads in simulated intestinal fluid after incubation for 2 h or 30 min in simulated gastric fluid vs. no acid incubation were found to be very different. The in vitro degradation of pectin in the coat by pectinolytic enzymes in simulated cecal fluid depended on whether the beads were placed in simulated gastric fluid prior to testing in simulated intestinal fluid. The percentage drug release also depended on the ratio of pectin to ethylcellulose in the coat.     

Development of Polysaccharide-Based Colon Targeted Drug Delivery Systems for the Treatment of Amoebiasis

ABSTRACT

The main focus of this study is to develop colon targeted drug delivery systems for metronidazole (MTZ). Tablets were prepared using various polysaccharides or indigenously developed graft copolymer of methacrylic acid with guar gum (GG) as a carrier. Various polysaccharides such as GG, xanthan gum, pectin, carrageenan, β-cyclodextrin (CD) or methacrylic acid-g-guar (MAA-g-GG) gum have been selected and evaluated. The prepared tablets were tested in vitro for their suitability as colon-specific drug delivery systems. To further improve the colon specificity, some selected tablet formulations were enteric coated with Eudragit-L 100 to give protection in an acidic environment. Drug release studies were performed in simulated gastric fluid (SGF) for 2 hr followed by simulated intestinal fluid (SIF) at pH 7.4. The dissolution data demonstrate that the rate of drug release is dependent upon the nature and concentration of polysaccharide/polymer used in the formulations. Uncoated tablets containing xanthan gum or mixture of xanthan gum with graft copolymer showed 30–40% drug release during the initial 4–5 hr, whereas for tablets containing GG with the graft copolymer, it was 70%. After enteric coating, the release was drastically reduced to 18–24%. The other polysaccharides were unable to protect drug release under similar conditions. Preparations with xanthan gum as a matrix showed the time-dependent release behavior. Further, in vitro release was performed in the dissolution media with rat caecal contents. Results indicated an enhanced release when compared to formulations studied in dissolution media without rat caecal contents, because of microbial degradation or polymer solubilization. The nature of drug transport was found to be non-Fickian in case of uncoated formulations, whereas for the coated formulations, it was found to be super-Case-II. Statistical analyses of release data indicated that MTZ release is significantly affected by the nature of the polysaccharide used and enteric coating of the tablet. Differential scanning calorimetry indicated the presence of crystalline nature of drug in the formulations.     

Dissolution kinetics evaluation of controlled-release tablets containing propranolol hydrochloride

In the present research, controlled-release propranolol hydrochloride tablets were prepared for twice-daily administration, allowing more uniform plasmatic levels of the drug. Pharmaceutical formulations were prepared with hydrophobic Eudragit® RSPO. The physical properties of the tablets were determined. Dissolution tests were performed in capsules containing the raw material using the following dissolution media: (A) distilled water, (B) simulated gastric juice without enzymes, and (C) simulated enteric juice without enzymes. A dissolution test was also performed for simulated samples (tablets) using distilled water as the dissolution medium.     

Controlled release of a poorly water-soluble drug from hot-melt extrudates containing acrylic polymers

Controlled release tablets containing a poorly water-soluble drug, indomethacin (IDM), acrylic polymers (Eudragit® RD 100, Eudragit® L 100, or Eudragit® S 100), and triethyl citrate (TEC) were prepared by hot-melt extrusion. The physicochemical and IDM release properties of the controlled release hot-melt extrudates were investigated. Indomethacin (IDM) was found to be both thermally and chemically stable following hot-melt extrusion processing and displayed a plasticizing effect on Eudragit® RL PO as demonstrated by a decrease in the glass transition temperatures of the polymer. The inclusion of either Pluronic® F68, Eudragit® L 100, or Eudragit® S 100 in the powder blend containing Eudragit® RD 100 prior to processing increased the rate of release of the IDM from the extrudates. An increase in the media pH and a decrease in the granule particle size also increased the rate of release of IDM. The inclusion of TEC up to 8% in the granule formulation or compressing the granules into tablets had no significant effect on the drug release rate. Indomethacin (IDM) was transformed from a crystalline Form I into an amorphous form in the Eudragit® RD 100 granules following hot-melt extrusion. The thermal processing facilitated the formation of a solid solution with a continuous matrix structure that was shown to control drug diffusion from the extrudates.     

Performance of multilayered particles: influence of a thin cushioning layer

Nowadays, oral dosage forms with controlled release kinetics have known an increasing interest. The polymer coating of drug-loaded particles is one of the most common methods used for controlling drug delivery. Such multilayered particles could be either filled into capsules or compressed into tablets for their oral administration. However, many studies have noticed that coating films are damaged during the compression process, leading to significant changes in drug release profiles. The aims of this study were to investigate the effects of a thin cushioning layer [made of HydroxyPropylMethyl Cellulose (HPMC)] applied on coated theophylline particles upon particle characteristics, tablet properties, and then upon their dissolution performance. If no significant effect was shown with particles, this thin HPMC layer played an important role in the tablets. Tablet cohesiveness was decreased due to HPMC cushioning properties and moreover, the theophylline release rate was increased, as HPMC is a water-soluble polymer creating channels in polymer film for dissolution medium. Therefore, a cushioning layer helped to protect polymer coats from fracture during compression but could also affect drug release and so, both effects must be checked in such a drug delivery system.     

Comparative Study of Aqueous and Organic Enteric Coatings of Chlorpheniramine Maleate Tablets

Two acrylic polymers (Eudragit® L 12.5 P and L 30 D) and a cellulosic polymer (cellulose acetate trimellitate, CAT) in organic and aqueous formulations were used in order to obtain an enteric coating on tablets containing clorpheniramine maleate as a water-soluble model drug. The coating of tablets was executed in a coating pan in similar conditions for each kind of solvent. The coated tablets were tested according to the delayed-release test of USP 23 (Method A). In our experimental conditions different amounts of polymers were needed to obtain an enteric coating. The lowest amount was in the case of Eudragit L 30 D (aqueous), after which appeared Eudragit L 12.5 P (organic), CAT (organic), and finally, CAT (aqueous) as the polymer that needed to be of the highest amount. During the dissolution test differences in the size and aspect of the tablets were observed according to the polymers. Acrylic polymers did not show changes in size and aspect, but CAT polymers showed a notable increase in size. me different behavior of the tablets during the dissolution test can explain the differences observed in the adjustment of the release data. The release data were tested assuming common kinetic models. In the present study it was observed that Eudragit L polymers release the drug in a first-order kinetic and that CAT releases it according to a zero-order kinetic.