Microstructures and Magnetic Properties of As-Cast RE（Dy）-Fe-C（B） Alloys

RE2 Fe14 Ccompoundswithtetragonalcrystalstructureareformedforalmostallrareearthelements(RE ) .Theirmagneticpropertiesareveryclosetothoseofthecorrespondingborides[1～ 5] .Formostofthelightrare earthelements ,La ,Ce ,ProrNd ,itisdifficulttoproducetheRE2 Fe14 Cphase[5～ 7] .Thereasonisthefairlylowtemperature (Tt)ofthesolidstatephasetransformationinthesecompounds .TheydecomposeeasilyintoRE2 Fe17Cxcompoundsathighertemperatures[8,9] .Highcoercivitiescanbeobtainedthroughacontrolledtransformat…     

Influence of Pr on Magnetic Properties and Microstructure of Melt-Spun （ Nd1-x Prx ） 10.5 （FeCoZr） 83.5 B6 Alloy

Inrareearthsores ,praseodymiumoftencoexistswithneodymiumandtheabundanceofPrisaboutonethirdofNd .Becauseofextremeexcellentpermanentmagneticpropertiesoftherareearth transitionmetalin termetalliccompoundNd2 Fe14 B ,Ndhasbeenwidelyutilizedsincethe 1980s .Withtheexploitationofrareearthsores ,Prisexcessiveinmarketandcheapinpricebecauseofitsnarrowapplication .ItisfoundthatPr2 Fe14 BhasasimilarmagneticpropertieswithNd2 Fe14 B[1] andcancertainlybeusedaspermanentmagneticmateri al[2～ 4 ] .Therefor…     

Magnetocaloric Properties of （Gd1-x Tbx ）3 Al2 Compounds Near Room Temperature

Recentlytherehasbeenaninterestinmagneticrefrigerationstudiesduetoitspotentialasanenergysavingtechnology[1～ 5] .Theefficiencyofmagneticre frigerationcriticallydependuponmagneticrefriger ants .Forthebestrefrigerantperformance ,verylargeisothermalmagneticentropychangeΔSisrequired ,andthemaximumvalueofΔSmustexistoverawiderrangeoftemperatures[2 ] .Recentdiscoveryofgiantmagnetocaloriceffect(MCE)ΔSinfirst ordertransi tionmaterialsgivesfurtherimpulsetowardsthedevel opmentofbothnewmaterialsandmag…     

Synthesis and Structure of a Polymeric Complex [Ce（bphsb）2（NO3）3]n

Polymeric cerium nitrate complex with 1,4-bis (phenylsulfinyl) butane (bphsb) [Ce(bphsb)2(NO3)3]n (1) was synthesized and characterized. The crystal structure of the complex indicated that the ligand bphsb and cerium( Ⅲ ) ion form a polymeric double-bridge chain complex involving 18-membered macrometallocycles. Each cerium ion is coordinated by ten 0 atoms in a distorted 4,4-bicapped square antiprism. In the complex the disulfoxide ligand acts as bis-monodentate O-ligand bridging metal centers.     

Growth, Thermal and Optical Properties of Dyx Y1 - x Al3 （ BO3 ） 4 Crystal

Recently ,solid statelasersoperatingintheyel lowregionhavegainedmuchattentionbecauseoftheirimportantapplicationinmilitaryandtelecommunica tion .SomeresearcheshavedemonstratedthatDy3 canobtainyellowlaseremissionusingthe 4 F9/2 →6 H13/2 channel[1～ 3] .RareearthionsdopedYAl3(BO3) 4(YAB)crystalwasreportedtobepromisingmaterialsforlaserapplications .TheYABcrystalhashigh hardness ,isnonhygroscopicandchemicallysta ble,andonlycanbegrownbythefluxmethodbe causeofmeltingincongruently .TheYABcryst…     

A Study of Two-Phase Nanocrystalline Nd_(8.5)Fe_(75)Co_5Cu_1Zr_3Nb_1B_(6.5)Permanent Magnet

Materialswithenhancedremanentmagneticpo larizationwereinitiallypreparedbyCoehoorn[1] frommelt spunNd3.8Fe77B19.2 ribbonsbyheattreatment .Thesimilarbehaviorwasalsoobservedfrommelt spuntwo phasesamplesofNd2 Fe14 Bandα Fe[2 ] .Themag neticpropertiesofisotropicnanocrystallinetwo phasepermanentsdependsensitivelyonmicrostructuralfea tures,suchasdistributionofmagneticallyhardandsoftphases ,meangrainsize ,particleshapeandgrainboundarytype[3] .Inordertoobtainhighmaximumenergyproduct ,itisnecessaryt…     

Effect of Multiple Alloying Elements on Microstructure and Magnetic Properties of Nanocomposite Nd2Fe14B／α-Fe Magnets

TheappearanceofnanocompositemagnetsbroketheremanencelimitpredictedbyStoner Wolhfarthmodethattheremanenceofisotropicmagnetwouldnotexceedhalfofitssaturationmagnetization[1] .Accord ingtoSkomski′scalculation[2 ] ,highmaximalenergyproduct (BH) maxof 80 0kJ·m-3 couldbeachievedinNd2 Fe14 B α FenanocompositewhentheaveragegrainsizeofNd2 Fe14 Bisrefinedtoabout 2 0nmandthatofα Fetoabout 10nm ,becauseoftheeffectofrema nenceenhancement (Mr Ms >0 .5 ) .Unfortunately ,thereported (BH) max(185kJ·…     

Evaluating Acceleration Ability of Electrons of SiO_2 and ZnS in ZnS∶Er Electroluminescence

SinceCoeyandSun[1]discoveredtheinterstitial compoundSm2Fe17Nx,ithasattractedmanyresearch ers′attention.Asakindofpermanentmagneticmate rial,Sm2Fe17Nxexhibitsfairlyhighsaturationmagneti zation(1.54T)[2],highanisotropyfield(14T)under roomtemperatureandhighC…     

Glass Forming Ability and Magnetic Property of Fe74Al4Sn2 （PSiB）20 Amorphous Alloy

Amorphous ribbons of Fe74 Al4Sn2 (PSiB)20 alloy have been synthesized by melt spinning and axial design method. The thermal properties of the amorphous ribbons have been measured by differential scanning calorimeter (DSC). The DSC results show that the Fe74 Al4Sn2P12Si4B4 amorphous alloy has relatively wider supercooled liquid region with a temperature interval of 40.38 K (△TX=TX-TR). The alloys with a higher phosphorous content in the metalloid element composition triangle of Fe74Al4Sn2(PSiB)20 have high glass forming ability. The amorphous alloys also show good magnetic properties in which Fe74Al4Sn2P6.67Si6.67B6.67 alloy has a large maximum permeability (μm), Fe78AlSn2P3Si3B10 alloy exhibits a high squareratio (Br/Blo) and FeT~A14Sn2P, Sil2B4 shows a low core loss (P0.5 1.3T). High glass forming ability and good magnetic properties make Fe74Al4Sn2(PSiB)20 amorphous alloys valuable in future research.     

用丁基膦酸二丁酯从氯化物介质中萃取Zn（Ⅱ），Fe（Ⅱ）和Fe（Ⅲ）

Anna Grzeszczyk和Magdalena Regel—Rosocka研究了用丁基膦酸二丁酯（DBBP）溶液从盐酸溶液中萃取Zn（Ⅱ），Fe（Ⅱ）和Fe（Ⅲ）。DBBP仅稍微萃取Fe（Ⅱ）。比较了DBBP与磷酸三丁酯（TBP）萃取锌的等温线。结果表明，DBBP的萃取率高于磷酸三丁酯的萃取率。由于高Cl-和HCl浓度下中性氯化配合物的存在，Fe（Ⅲ）可有效转移，因此，从含Fe（Ⅲ）的氯化物溶液中用DBBP选择性分离Zn（Ⅱ）是不可能的。     

Manufacturing of Injection-Molded NdFeB Magnet with (BH)max111 kJ · m-3

The bonded NdFeB magnets prepared by injection molding meet with the development tendency of the magnet in small volume, light weight and high performance ,and have a good prospect.In this paper, a modified nylonbased binder was developed for powder injection molding of NdFeB bonded magnets.The effects of pretreatment of NdFeB anisotropic magnetic powder produced with HDDR processing on the anti-oxidation behaviors of powder and the final magnetic properties of the molded bonded magnets were studied.The optimal powder loading of 65 vol% was achieved with the modified binder.It was found that the properties of the bonded magnets were mainly affected by the powder surface pretreatment and the intensity of the applied alignment magnetic field during injection molding for a certain powder.Bonded magnets with remanence of 0.820 T, intrinsic coercivity of 1140.3 kA· m-1 and maximum energy product of 111 kJ · m-3 were produced with the optimal processing.     

Dependence of Magnetic Properties of Rapidly Quenching （Nd, Pr）x（FeCoZr）94-xB6 Bonded Magnets on Rare Earths Content

By using sub-everquenching and annealing method which has a wide processing window, (Nd, Pr)x(Fe-CoZr)94-xB6(x=12, 10.5, 10, 9) bonded magnets were prepared and the effect of rare earths content on magnetic properties was investigated. Being spun at sub-ove, quenching speed the as-spun ribbons consist of amorphous phases mixed with fine crystallites. After crystallization under optimum annealing conditions and bonded with 3.25%(mass fraction) epoxy, the magnets obtained the optimum magnetic properties. The rare earths content directly determines the magnetic properties. With the reduction of rare earths content, Br increases but Hci and (BH)max decrease, x=10 is the critical value for the magnetic properties change. Below this value, Br increases slowly meanwhile Hci and (BH)max decrease strongly because alloy contains extra fractions of soft magnetic phase which are not coupled with the hard magnetic phase. This experimental result is consistont with the calculated results using the model of volume fraction of soft magnetic phase coupled completely suggested.     

HDDR NdFeB磁粉两步法伴温磁场取向制备高性能柔性各向异性NdFeB黏结磁体

利用高性能吸氢-歧化-脱氢-再复合(HDDR)NdFeB各向异性磁粉,通过两步法伴温磁场取向工艺制备高性能柔性各向异性NdFeB黏结磁体,重点研究了两步法伴温磁场取向工艺制备出不同成分配比磁体的磁性能和力学性能.结果发现:制备出磁体的取向度有大幅度提高,当成分配比(质量分数)为96.5%磁粉+1%偶联剂+2.5%黏结体系的磁体在120℃加热保温30 min磁场取向后,磁能积达到97 kJ·m-3,而磁体的矫顽力最大降幅只有1.3%,论证了两步法伴温磁场取向工艺制备柔性各向异性NdFeB黏结磁体在实际生产的可行性.环氧树脂润滑剂的加入使得制备出磁体的延伸率和柔性均大幅度下降,并且加入量越多,下降幅度越大,因此环氧树脂润滑剂最大加入量不应超过1%(质量分数).      

Microstructure and Magnetic Properties of Anisotropic Nd-Fe-B Magnets Fabricated by Single-Stage Hot Deformation

Anisotropic Nd-Fe-B magnets were fabricated by the single stage hot deformation (SSHD) method. The magnetic properties of the anisotropic Nd-Fe-B magnets are as follows: the maximum energy product is 234.7 kJ·m-3, remanence 1.16 T and coercivity 684.3 kA·m-1. A study of the relationship between microstructure and magnetic properties for the anisotropic Nd-Fe-B magnets was carried out. The results show that the grains of Nd2Fe14B have grown up preferentially along the direction perpendicular to the pressing direction.     

纳米晶交换耦合稀土粘结永磁体磁性能与制备工艺参数间关系的研究

本文利用熔体快淬工艺将成分为Ｎｄ８．１６Ｄｙ１Ｆｅ８５．２６Ｎｂ１Ｂ４．５８的合金在三种不同淬速（１２．２５、１６．３３、２８．６ｍ／ｓ）下制备成非晶快淬条带,并在热处理后经快速淬火而制得纳米永磁体。利用ＴＥＭ和ＸＲＤ方法,对晶化后的稀土永磁粉进行了微结构分析与表征,初步探讨了淬速及晶化条件（包括晶化温度和时间）对稀土粘结永磁体磁性能的影响规律,获得了较高矫顽力的纳米交换耦合稀土粘结永磁体。     

Preparation and characterization of sodium silicate/epoxy resin composite bonded Nd-Fe-B magnets with high performance

As an organic binder for bonded Nd-Fe-B magnets, epoxy resin(EP) has poor heat resistance but good moisture resistance, while sodium silicate(SS) has poor moisture absorption but better heat resistance and corrosion resistance. In order to improve high temperature stability and decrease moisture absorption of bonded Nd-Fe-B magnets, EP/SS composites were applied as the binder to prepare bonded Nd-Fe-B magnets. The magnetic properties, moisture absorption, corrosion resistance, compressive strength and microstructure of composite bonded magnets were investigated. The results show that EP/SS bonded magnets can obtain excellent magnetic properties at room temperature, and even useable magnetic properties a thigh temperature environments at 200°C. EP/SS composite binder effectively improves heat resistance and corrosion resistance of bonded Nd-Fe-B magnets, and reduces the hygroscopic properties. The molecule of sodium silicateis rigid and keeps it original shape at high temperature environments. In addition, SS in composite binder improves the mobility of the magnetic powders during the pre-pressing process, which makes the magnetic powders attain a more regular structure. These two factors will increase the mechanical properties. Moreover, sodium silicate in the composite binder can also cover the surfaces protecting the magnetic powders from oxidation and corrosion. EP in composite binder can cover SS surface to reduce the water absorption of SS as epoxy is a hydrophobic material. The EDX analysis shows that the composite binder has accumulated in the gaps of the magnet powders, which not only improves heat resistance and corrosion resistance, but also increases the mechanical properties. Therefore, EP/SS composite binder endows bonded Nd-Fe-B magnets excellent comprehensive properties.     

Study on Key Techniques for Producing High Performance NdFeB Sintered Permanent Magnets

ＮｄＦｅＢｍａｇｎｅｔｓｈａｖｅｂｅｅｎｉｍｐｒｏｖｅｄｄｒａ ｍａｔｉｃａｌｌｙｓｉｎｃｅｉｔｗａｓｉｎｖｅｎｔｅｄｉｎ 1 983 .Ｔｗｏｔｙｐｅｓｏｆｓｉｎｔｅｒｅｄｍａｇｎｅｔｓ ,ｈｉｇｈｅｎｅｒｇｙｐｒｏｄ ｕｃｔｓ ((ＢＨ ) ｍａｘ)ａｎｄｄｏｕｂｌｅｈｉｇｈ (ｈｉｇｈ(ＢＨ ) ｍａｘａｎｄｈｉｇｈｃｏｅｒｃｉｖｉｔｙ (ｉＨｃ) )ａｒｅｔｈｅｔｗｏｔｅｎｄｅｎｃｉｅｓｆｏｒＮｄＦｅＢｓｉｎｔｅｒｅｄｍａｇｎｅｔｓ .Ｂｏｔｈｆａｃｔｏｒｉｅｓａｎｄｒｅｓｅａｒｃｈｉｎｓｔｉｔｕｔｅｓａｒｅｆｏｃｕｓ…     

Influence of Heat Treatment on Microstructures and Properties of Nd8Fe78B6Co4 Alloy

Melt-spun Nd8Fe78B6Co4 magnetic powders and their bonded magnets were prepared with the optimization of compositions and preparation techniques. The microstructure change of alloy NdFeB and the relation between microstructure and heat-treatment were studied. The heat-treatment temperature is 200～700 ℃. The as-cast structure of the alloy is typically amorphous. Different melt-spun speed and different heat treatment could result in different magnetic properties of NdFeB magnets. Magnetic properties of NdFeB increase with the addition of element Co. The magnetic properties of magnet alloy get the best when the melt-spun speed reaches 23～26 m·s-1, heat treatment temperature is 690 ℃ and time is 30 min.     

FeCuNbSiB粘结磁体的制备及磁性能研究

通过2种途径将熔体快淬法制得的FeCuNbSiB非晶薄带制成环状粘结磁体。一是将非晶薄带进行晶化处理,再将晶化后的薄带粉碎成不同粒度的粉末,然后与粘结剂相混合制成粘结磁体。二是将非晶薄带直接粉碎成不同粒度的粉末,再将此粉末进行晶化处理,将晶化后的磁粉与粘结剂相混合制成粘结磁体。分析了磁粉粒度和模压压力对粘结磁体性能的影响。并对两种粘结磁体的性能进行比较。结果表明,第一种方法制备的粘结磁体的性能优于第二种。