Facile synthesis and characterization of novel bis(2-S-alkylpyridines) and bis(3-aminothieno[2,3-b]pyridines) incorporating 1,3-diarylpyrazole moiety

3-(4-Hydroxyphenyl)-1-phenyl-1H-pyrazole-4-carbaldehyde (1) is condensed with acetophenone to afford the corresponding unsaturated carbonyl compound 4 whose potassium salt is reacted with 1,4-dibromobutane to afford the bis-unsaturated carbonyl compound 3. Both carbonyl compounds 3 and 4 are reacted with 2-cyanoethanethioamide, through Michael addition reaction followed by cyclocondensation, to prepare the starting materials bis(pyridine-2(1H)-thione) derivative 5 and pyridine-2(1H)-thione derivative 8. Two synthetic routes to synthesize the target materials 7 and 14 are described to get the most efficient method for preparation and maximum yield%. The first route came from the direct alkylation of the bis(pyridine-2(1H)-thione) derivative 5 using iodomethane (6a) and benzyl chloride (6b) to afford the corresponding bis(2-S-alkylpyridine) derivatives 7a,b. The reaction of 5 with halo-containing compounds 10a–d to synthesize the target materials bis(3-aminothieno[2,3-b]pyridine) derivatives 14a–d failed under various reaction conditions. The second route involves the reaction of pyridine-2(1H)-thione derivative 8 with 6a,b and 10a–d to afford the corresponding 2-S-alkylpyridine derivatives 9a,b and 3-aminothieno[2,3-b]pyridine derivatives 13a–d, through the formation of 2-S-alkylpyridine derivatives 12a–d followed by a Thrope-Ziegler reaction, whose potassium salts reacted with 1,4-dibromobutane to afford the corresponding target materials 7a,b and 14a–d, respectively. The structures of target molecules were elucidated using elemental analyses and spectral data.     

Photochemical behavior of poly(organophosphazenes). XI. Photochemistry of poly[bis(4-benzylphenoxy) phosphazene]

In this paper we present results on the photolysis of poly[bis(4-benzylphenoxy)-phosphazene] in solution and in film, both in the presence and in the absence of molecular oxygen. Light irradiation of the polymer in oxygen-saturated CH₂Cl₂ solutions results in a remarkable degradation of the polyphosphazene, while in argon-purged solutions no appreciable variations of the polymer structure could be detected. The photolysis of poly[bis(4-benzylphenoxy)phosphazene] in films induces the cross-linking of the polymer regardless of the presence or the absence of molecular oxygen. The main process observed during the photochemistry both in solution and in the solid state of the polymer is the oxidation of the 4-benzylphenoxy group on the polyphosphazene, without involvement of the inorganic -P=N- backbone. The effect of temperature on the photolysis of the polyphosphazene substrate in film is also reported.     

Photochemical behaviour of poly(organophosphazenes). 14. Photooxidation of poly[bis(4-isopropylphenoxy) phosphazene] under accelerated conditions

The photooxidation of poly[bis(4-isopropylphenoxy)phosphazene] under accelerated conditions has been followed by FTIR and UV visible spectroscopic techniques. The main photooxidation products are acetophenone and phenol groups. In addition, acetone vapors have been detected by GC MS combined techniques concomitant with the IR spectral changes in the CH stretching region, suggesting a significant decrease in the isopropyl moieties. The presence of polymeric sequences having phenol groups under our conditions gives origin to further oxidation reactions due to electron transfer or radical recombination or to hydrogen abstraction reactions promoted by unhindered phenoxyl radicals. In addition, the absence of UV visible light, i.e., under thermooxidation reaction at 60° C has demonstrated that phenol groups are the main responsible of secondary oxidation products. The complexity of the photooxidation mechanism in the solid state for this polymer makes it difficult to determine a definitive degradation mechanism under both thermo- and photooxidative conditions.Presented at the 1st Italian Workshop on Cyclo- and Poly(phosphazene) Materials, February 15–16, 1996, at the CNR Research Area in Padova, Italy.See Ref. 14.     

Pure gas and vapor permeation properties of poly[1-phenyl-2-[p-(trimethylsilyl)phenyl]acetylene] (PTMSDPA) and its desilylated analog, poly[diphenylacetylene] (PDPA)

The permeabilities of He, H₂, N₂, O₂, CO₂, CH₄, C₂H₆, C₃H₈, and n-C₄H₁₀ in poly[1-phenyl-2-[p-(trimethylsilyl)phenyl]acetylene] (PTMSDPA) and poly[diphenylacetylene] (PDPA) are presented and compared to those of poly(1-trimethylsilyl-1-propyne) (PTMSP), poly(1-phenyl-1-propyne) (PPP), and polysulfone. Like PTMSP, PTMSDPA, a disubstituted glassy acetylene-based polymer, exhibits higher permeabilities to organic vapors than to permanent gases due to its rigid polyacetylene backbone and bulky side groups, which provide a relatively high fractional free volume (FFV) value of 0.26. Desilylation was performed on PTMSDPA. The resulting material, PDPA, is totally insoluble in common organic solvents, so it has much higher chemical resistance than PTMSDPA. Additionally, due to its insolubility in polymerization solvents, desilylation provides the only known route to high molar mass PDPA. The FFV of the resulting membrane (PDPA) is reduced by approximately 12% relative to that of PTMSDPA. This leads to a decrease in gas permeability values and selectivity of organic vapors relative to nitrogen. For example, the oxygen permeability is reduced from 1200 to 500 Barrers upon desilylation. The pure gas selectivities decrease from 9 to 3 for n-C₄H₁₀/N₂ and from 26 to 9 for C₃H₈/N₂.     

Synthesis and properties of novel phosphorus‐containing poly(ether ether ketone ketone)s

A novel monomer, bis[4‐(4‐fluorobenzoyl)phenyl]phenylphosphine oxide, was synthesized through the reaction of bis(4‐chloroformylphenyl) phenyl phosphine oxide with fluorobenzene. Three poly(ether ether ketone ketone)s derived from bis[4‐(4‐fluorobenzoyl)phenyl]phenylphosphine oxide and different aromatic bisphenols were prepared by aromatic nucleophilic substitution reactions. The resulting polymers had inherent viscosities in the range of 0.55–0.73 dL/g. The structures of the poly(ether ether ketone ketone)s were characterized with Fourier transform infrared and ¹H‐NMR. Thermal analysis indicated that the glass‐transition temperatures of the poly(ether ether ketone ketone)s were higher than 200°C, and the 5% weight loss temperatures in nitrogen were higher than 463°C. All the polymers showed excellent solubility in polar solvents such as N‐methyl‐2‐pyrrolidone, dimethylformamide, and dimethylacetamide and could also be dissolved in chlorinated methane. The polymers afforded transparent and flexible films by solvent casting. Organic phosphorous moieties also imparted good flame‐retardancy to the polymers. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis,characterization, and gas transport properties of novel iptycene-based poly[bis(benzimidazobenzisoquinolinones)]

Two novel iptycene-based tetramine monomers were successfully synthesized by nucleophilic aromatic substitution of triptycene-1,4-diol and pentiptycene-6,13-diol with 5-chloro-2-nitro-aniline, followed by reduction, respectively. These monomers were polymerized with 4,4-binaphthyl-1,1,8,8-tetracarboxylic dianhydride to obtain two novel iptycene-based poly[bis(benzimidazobenzisoquinolinones)]s (PBIBI–TPD and PBIBI–PPD) by a one-step, high-temperature solution polycondesation. Incorporation of iptycene groups especially the pentiptycene group in the polymer backbones improved their solubility and thermal stability. The resulting membranes exhibited good gas permeability owing to the high internal free volume elements introduced by the iptycene groups as well as high gas selectivity due to the restricted local segmental mobility arising from the interlocking of these groups in the polymer backbone. The membrane of PBIBI–PPD showed high CO₂ permeability (112 barrer) and moderately good CO₂/N₂ and CO₂/CH₄ selectivity (22 and 31) for mixed gas separation.     

Synthesis, characterization, and properties of poly(ethylene terephthalate)/poly(1,4-butylene succinate) block copolymers

Reactive blending at 290 °C of a series of mixtures of poly(ethylene terephthalate) (PET) and poly(1,4-butylene succinate) (PBS) led to the formation of block PET/PBS copolyesters. The block lengths of the resulting copolymers decreased with the severity of the treatment. Copolyesters with PET/PBS molar compositions of 90/10, 80/20, 70/30, and 50/50 were prepared by this method and their composition and microstructure were characterized by ¹H and ¹³C NMR, respectively. The T_g, T_m, and crystallinity of the copolymers decreased as the content in PBS and the degree of randomness increased. The elastic modulus and tensile strength of the copolymers decreased with the content of PBS, whereas, on the contrary, the elongation at break increased. The PET/PBS copolymers exhibited a pronounced hydrolytic degradability, which increased with the content in 1,4-butylene succinic units. Hydrolysis mainly occurred on the aliphatic ester groups.     

Synthesis and properties of soluble poly[bis(benzimidazobenzisoquinolinones)] based on novel aromatic tetraamine monomers

Four aromatic tetraamine monomers possessing flexible ether linkages were successfully synthesized by nucleophilic aromatic substitution of hydroquinone, 4,4′-dihydroxybiphenyl, 2,2′-bis(4-hydroxyphenyl)propane, and 2,7-dihydroxynaphthalene with 5-chloro-2-nitroaniline, followed by reduction, respectively. With these monomers, a new class of soluble poly[bis(benzimidazobenzisoquinolinones)] was prepared by a one-step, high-temperature solution polycondensation. The resulting polymers were completely soluble in phenolic solvents and had high inherent viscosities ranging from 1.2 to 1.5 g dL⁻¹. These polymers had glass transition temperatures in the range of 427-449 °C. Thermogravimetric analysis showed that all polymers were thermally stable, with 5% weight loss recorded above 510 °C in nitrogen. The tough polymer films, obtained by casting from solution, had tensile strength, elongation at break, and tensile modulus values in the range of 79.5-114.5 MPa, 10.3-23.0%, and 1.1-1.7 GPa, respectively. It is demonstrated that these semiladder polymer membranes displayed high CO₂ permeability coefficients (P₂CO=31.6−96.5barrer) and permeability selectivity of CO₂ to CH₄(P₂CO/P₄CH=30.6−43.4).     

Degradation of poly[bis(ethylamino)phosphazene] in aqueous solution

Three polymers of poly[bis(ethylamino)phosphazene] (PBEAP) containing different amounts of the residual P–Cl moieties, which had been hydrolyzed into P OH in the following sample purification processes, were prepared by substitution of the chlorines on poly(dichlorophosphazene) with ethylamine. Only the polymer which had the highest side-chain content of ethylamino groups (ca. 93°_o) had a film-forming ability and a crystalline nature. The hydrolytic degradation of PBEAP in acidic solutions was investigated using the solution viscosity data obtained as a function of standing time. Acetic acid, 0.5 and 1N, pure acetic acid, and 2.2.2-trifluoroethanol were used as solvents. The degradation was composed of random breaking processes along the polymer chain, especially at the-N=P(OH)₂-and-N=P(OH)(NHC₂H₅)-units, and an unzippering-like breaking process which was started at the chain ends produced by the former random breaking. The random breaking caused an abrupt decrease in viscosity at the beginning of the degradation, and on the contrary, the unzippering-like breaking appeared as a gradual decrease in viscosity at the later stages of degradation. The total rate of degradation depended on the concentration of the ethylamino groups.     

Synthesis of tertiary poly(amido-amine)s with amido- and amino-groups randomly arranged along the macromolecular chain

A new synthesis of poly(amido-amine)s from bis (secondary amine)s and acryloyl chloride has been studied, leading to polymers in which the amido- and amino-groups are randomly arranged along the macromolecular chain. A poly(amido-amine) based on piperazine, chosen as the mother compound, has been fully characterized by ¹³C n.m.r. as well as by identification and quantitative evaluation of its hydrolysis products.     

New positive-type photosensitive polyimide: poly(hydroxyimide) with diazonaphthoquinone

A positive working photosensitive polyimide based on polyhydroxyimide (PHI) and 2,3,4-tris[1-oxo-2-diazonaphthoquinone-4-sulfonyloxy] benzophenone (D4SB) as a photoreactive compound has been developed. The PHI was prepared by the ring-opening polyaddition of 4,4′-hexafluoroisopropylidenebis(phthalic anhydride) (6FDA), 4,4′-diamino-4″-hydroxytriphenylmethane (DHTM), and 4,4′-oxydianiline (ODA), followed by thermal cyclization in refluxing xylene. The PHI film showed excellent transparency to UV light. The photosensitive polyimide containing 30 wt% of D4SB showed a sensitivity of 250 mJ/cm² and a contrast of 5.2 when it was exposed to 436 nm light followed by developing with a 1% aqueous tetramethylammonium hydroxide (TMAH) solution at 35°C.     

Synthesis and physicochemical characterization of a well-defined poly(butadiene 1,3)-block-poly(dimethylsiloxane) copolymer

For the first time, order-order and order-disorder transitions were detected and characterized in a model diblock copolymer of poly(butadiene-1,3) and poly(dimethylsiloxane) (PB-b-PDMS). This model PB-b-PDMS copolymer was synthesized by the sequential anionic polymerization (high vacuum techniques) of butadiene 1,3 (B) and hexamethylciclotrisiloxane (D₃), and subsequently characterized by nuclear magnetic resonance (¹H and ¹³C NMR), size exclusion chromatography (SEC), Fourier Transform infrared spectroscopy (FTIR), Small-Angle X-ray scattering (SAXS) and rheology. SAXS combined with rheological experiments shows that the order-order and order-disorder transitions are thermoreversible. This fact indicates that the copolymer has sufficient mobility at the timescale and at the temperatures of interest to reach their equilibrium morphologies.     

Further experimental considerations on poly(dihalophenylene oxide)

The decomposition of copper(II) 2,6-dibromo-4-chlorophenoxide in acetonitrile yields poly(dihalophenylene oxide). ¹H NMR study revealed that 1,4-catenation was favoured over 1,2-catenation, leading to higher linearity in the structure.     

Miscibility and phase behavior of poly(D,L-lactide)/poly(p-vinylphenol) blends

The miscibility of poly(D ,L -lactide) (PDLLA) and poly(p-vinylphenol) (PVPh) blends has been studied by differential scanning calorimetry and Fourier transform infrared spectroscopy (FTIR). Phase separation was observed in blends over a wide composition range. A PDLLA-rich phase was found to coexist with an almost pure PVPh phase. The quenched blend samples showed two glass transitions (T_gs), except for a blend with a low PVPh content. However, the T_g value of the PDLLA-rich phase showed a gradual increase with increasing PVPh content. No evidence of interassociation (hydrogen bond formation) between PDLLA and PVPh was found by FTIR. The phase behavior of the blends was simulated using an association model. The results suggested that the equilibrium constant of interassociation between PDLLA and PVPh was small. The phase compositions of the two separated phases were calculated using Fox, Gordon-Taylor, and Couchman equations. The amount of PVPh in the PDLLA-rich phase increased with increasing PVPh content in the blend. © 1998 John Wiley & Sons, Inc. J. Appl. Polym. Sci. 70: 811–816, 1998     

四(1,3-二氯-2-丙基)-1,2-亚乙基二磷酸酯的合成及应用

研究了以三氯氧磷、乙二醇、环氧氯丙烷为原料、TiC l4为催化剂、通过两步反应合成四(1,3-二氯-2-丙基)-1,2-亚乙基二磷酸酯阻燃剂的方法,对反应条件进行了优化。结果表明,当原料摩尔配比n乙二醇∶n三氯氧磷∶n环氧氯丙烷为1∶2.3∶4.2,反应温度分别为15~18℃、50~60℃,反应时间分别为3.5 h、4 h,催化剂用量为0.6%(与原料总量之比),制得的目标产物最好,以乙二醇计产率达92.3%。通过红外光谱和磷含量分析对产物进行了表征。用其制阻燃聚氨酯软泡,具有较好的阻燃效果。     

Covalent incorporation of [70]fullerene into poly(p-methylstyrene) by anionic copolymerization

A soluble non-crosslinked C₇₀-p-methylstyrene (C₇₀-PMS) copolymer was prepared in sodium naphthalene-initiated anionic polymerization reaction. This copolymer exhibits the lower intrinsic viscosity and higher absolute molecular weight compared with linear polystyrene at equal retention time, suggesting that the copolymer possess star-shaped structure. The covalent graftings of multiple poly(p-methylstyrene) (PPMS) chains onto the C₇₀ core result in the marked enhancement of the absorption degree at longer wavelengths, and in the increase of glass transition temperature. Like pure PPMS, C₇₀-PMS copolymer also exhibits the higher solvency in common solvents.     

Synthesis and properties of polymer brush consisting of poly(phenylacetylene) main chain and poly(dimethylsiloxane) side chains

A novel polymer brush consisting of poly(phenylacetylene) (PPA) main chain and poly(dimethylsiloxane) (PDMS) side chains was synthesized by the polymerization of phenylacetylene-terminated PDMS macromonomer (M-PDMS). The macromonomer was prepared by the esterfication of monohydroxy-ended PDMS (PDMS-OH, degree of polymerization (DP) = 42) with p-ethynylbenzoic acid. The polymerization of M-PDMS using [(nbd)RhCl]₂/Et₃N catalyst led to polymer brush, poly(M-PDMS), with M_n up to 349?000 (DP of main chain 104). Poly(M-PDMS) with narrow molecular weight distribution (M_n = 39?900, M_w/M_n = 1.11) was obtained with a vinyl-Rh catalyst, [Rh{C(Ph)CPh₂}(nbd){P(4-FC₆H₄)₃}]/(4-FC₆H₄)₃P. Poly(M-PDMS)s were brown to orange viscous liquids and soluble in organic solvents such as toluene and CHCl₃. The UV-vis absorptions of poly(M-PDMS) were observed in the range of 350-525 nm, which are attributable to the PPA main chain.     

Synthesis and characterization of new poly(siloxysilanes)

The efficient synthesis of two new monomers, vinyltris(dimethylsiloxy)silane (2) and tris(dimethylvinylsiloxy)silane (3), was developed. Hydrosilation of these new A–B₃ monomers affords highly branched starburst poly(siloxysilane) polymers. Polymerization of2 yields a polymer structure that has siliconhydride functional groups on the outer sphere. Polymerization of3 yields a polymer that has the same hyperbranched poly(siloxysilane) core as the polymer produced from2, but the outer sphere contains vinyl moieties. The presence of silicon-hydride or vinyl groups on the surface of both polymers allows functionalization of these materials with a wide variety of reagents.Presented at the XXVIth Silicon Symposium, Indiana University—Purdue University at Indianapolis, March 26–27, 1993.     

Cross-linked polymers based on 2,3,5,6-tetra-substituted pyrrolo[3,4-c]pyrrole-1,4(2H,5H)-dione (DPP): Synthesis, optical and electronic properties

A series of 2,3,5,6-tetra-substituted pyrrolo[3,4-c]pyrrole-1,4(2H,5H)-dione (DPP) derivatives carrying thienyl-, 3,4-ethylenedioxy-thienyl- (EDOT-) and 3,4-ethylenedithiathienyl- (EDTT-) substituent groups have been synthesized and electrochemically polymerized. The polymers were investigated using UV/vis absorption spectroscopy and cyclic voltammetry. It was found that the growth of the polymers proceeded as random coupling of the thiophene groups in the 2-,3-,5-, and 6-positions of the DPP chromophore. In the cross-linked polymers, conjugated sequences were only built through coupling of thiophene groups in 3,6-positions, and separated by non-conjugated sequences through coupling with thiophene units in other positions of the DPP core.     

双[2-(5-硝基-2H-四唑基)-2,2-二硝乙基]硝胺的合成与量子化学计算

以2-偕二硝甲基-5-硝基四唑钾盐(KDNMNT)为原料,在硫酸-水介质中经KDNMNT与乌洛托品(HMTA)的缩合反应制备出双[2-(5-硝基-2 H-四唑基)-2,2-二硝乙基]胺(BNTDNEA),BNTDNEA在H2NO3介质中经硝化反应制备出双[2-(5-硝基-2 H-四唑基)-2,2-二硝乙基]硝胺(NTEA),总收率为30.20%。用红外光谱、核磁和元素分析对BNTDNEA和NTEA的结构进行了表征。用量子化学方法对NTEA的密度(ρ)、生成焓[ΔfHm(s)]、爆速(D)和爆压(p)进行了理论计算。结果表明,合成BNTDNEA的最佳反应条件为:n(KDNMNT)∶n(HMTA)=2.5∶1.0,反应温度40℃;合成NTEA的最佳条件为:硝化体系为98%的硝酸,硝化反应温度为5℃。NTEA的ρ、ΔfHm、D和p值分别为1.97g/cm3、416.02kJ/mol、9.336km/s和41.53GPa,其能量水平与CL-20相当。