Preparation and properties of transparent zinc oxide/silicone nanocomposites for the packaging of high‐power light‐emitting diodes

New transparent zinc oxide (ZnO)/silicone nanocomposites with outstanding integrated properties, including a high UV‐shielding efficiency and transparency, bigger thermal conductivity, and lower dielectric constant, were successfully developed; they were prepared by the uniform dispersion of organic modified nano‐ZnO in a silicone matrix through in situ polymerization. The ZnO precursor was prepared by a direct precipitation method, which was then calcinated at different temperatures to produce nano‐ZnO with various morphologies and sizes. The effects of the size, surface nature, and content of nano‐ZnO on the key properties (e.g., optical and dielectric properties, thermal conductivities) of the composites were systematically investigated. The results show that the organic nano‐ZnO prepared by 3‐methacryloxypropyltrimethoxysilane can increase the dispersion of nano‐ZnO in silicone resin, and the interfacial adhesion between inorganic and organic phases, and consequently improve the integrated properties of nanocomposites. The increase of the particle content and size of ZnO in composites can lead to high thermal conductivity and UV‐shielding efficiency but lower visible‐light transparency, so there is an optimum content and size of ZnO in composites to obtain the best integrated properties of the composites. Specifically, the nanocomposite containing 0.03 wt % organic nano‐ZnO with an average size of 46 ± 0.4 nm not only had a high visible‐light transparency, UV‐shielding efficiency, and thermal conductivity but also possessed a low dielectric constant and loss and met the requirements of high‐performance electronic packaging for high‐power light‐emitting diodes. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis and characterization of rutile titanium dioxide/polyacrylate nanocomposites for applications in ultraviolet light‐shielding materials

Rutile titanium dioxide (TiO₂)/poly(methyl methacrylate‐acrylic acid‐butyl acrylate) nanocomposites were synthesized via seeded emulsion polymerization and characterized by Fourier transmission infrared, dynamic light scattering, X‐ray diffraction, ultraviolet–visible (UV–vis) spectroscopy, scanning electron microscopy, transmission electron microscopy, and thermogravimetric analysis to study their UV‐shielding property. The effects of the nanoseed types, surfactant concentrations, and functional monomer amounts on the polymerization conversion, particle size, emulsion stability, and morphologies of the resulting nanocomposites were investigated. The dependence of UV‐shielding performance on the nanoparticle content and dispersion was also explored. The optimized results are obtained with 2 wt% of TiO₂ nanoparticles addition, and the effectiveness of UV shielding is significantly increased by using the synthesized rutile nano‐TiO₂/polyacrylates, for which the nanocomposite coating with a thickness of 200 μm could block up to 99.99% of UV light (≤350 nm) as confirmed by UV–vis spectrometry. POLYM. COMPOS., 36:8–16, 2015. © 2014 Society of Plastics Engineers     

Development and characterization of co‐polyimide/attapulgite nanocomposites with highly enhanced thermal and mechanical properties

A series of co‐polyimide/attapulgite (co‐PI/AT) nanocomposites have been successfully fabricated from anhydride‐terminated polyimide (PI) and γ‐aminopropyltriethoxysilane (APTES)‐modified fibrous attapulgite (AT). Co‐PI was prepared from 4,4′‐diaminodiphenyl ether (ODA), 4,4′‐oxydiphthalic anhydride (ODPA), and 2,2‐bis[4‐(3,4‐dicarboxyphenoxy)phenyl]propane dianhydride (BPADA) by using the method of chemical imidization. Different amount of AT (0, 1, 3, 5, 7 wt%) were introduced into co‐PI via strong covalent interactions between terminal anhydride and amino groups. The properties of co‐PI/AT nanocomposites such as morphology, thermal stability, mechanical properties, and UV transparency were investigated to illustrate the contribution of the introduction of AT into the PI matrix. FTIR spectra and SEM images revealed that network structures between co‐PI and AT are formed, which endowed the nanocomposites with outstanding thermal and mechanical properties. The co‐PI/AT nanocomposites exhibited excellent thermal and thermo‐oxidative stabilities with the onset decomposition temperature and 10% weight loss temperature increasing to the ranges of 502–510°C and 555–562°C from 480°C to 526°C for the pristine co‐PI, respectively. The glass transition temperatures of these co‐PI/AT nanocomposites increased to the range of 231–238°C from 222°C for pure co‐PI. The co‐PI/AT nanocomposites films were found to be transparent, flexible, and tough. By incorporating 5 wt% AT into the co‐PI matrix, the tensile strength, elongation at break, and Young's modulus of the co‐PI/AT nanocomposites reached 110.7 MPa, 14.5%, and 1.2 GPa, respectively, which are 50%, 120%, and 80% increased compared with the values of pristine PI. POLYM. COMPOS., 35:86–96, 2014. © 2013 Society of Plastics Engineers     

Exceptionally good,transparent and flexible FeS2/poly(vinyl pyrrolidone) and FeS2/poly(vinyl alcohol) nanocomposite thin films with excellent UV‐shielding properties

Composites of nanocrystalline iron disulfide (FeS₂) coated with poly(vinyl pyrrolidone) (PVP) or poly(vinyl alcohol) (PVA) have been successfully synthesized using a solvothermal process, in which PVP and PVA serve as soft templates. Transparent, flexible thin films of these nanocomposites were prepared from homogeneous solution using a solution‐casting approach. X‐ray diffraction and thermogravimetric analysis and energy‐dispersive X‐ray, Fourier transform infrared and UV‐visible absorption spectroscopic techniques were employed to study the structural and optical properties of these nanocomposite films. UV‐visible spectra in transmission mode reveal the UV‐shielding efficiency of these nanocomposite films and the films are found to be exceptionally good for UV‐shielding applications in the wavelength range 200 to 400 nm. The present work aims at developing transparent and flexible UV‐shielding materials and colour filters using cost‐effective and non‐toxic inorganic–polymer nanocomposites. © 2012 Society of Chemical Industry     

Preparation and optical properties of transparent epoxy composites containing ZnO nanoparticles

Polymer nanocomposites are usually made by incorporating dried nanoparticles into polymer matrices. This way not only leads to easy aggregation of nanoparticles but also readily brings about opaqueness for nanocomposites based on functionally transparent polymers. In this letter, transparent ZnO/epoxy nanocomposites with high‐UV shielding efficiency were prepared via two simple steps: first, in situ preparation of zinc hydroxide (Zn(OH)₂)/epoxy from the reaction of aqueous zinc acetate (Zn(Ac)₂·2H₂O) and sodium hydroxide (NaOH) at 30°C in the presence of high‐viscosity epoxy resin; second, thermal treatment of the as‐prepared Zn(OH)₂/epoxy hybrid into ZnO/epoxy composites. Optical properties of the resultant ZnO/epoxy nanocomposites were studied using an ultraviolet–visible (UV–vis) spectrophotometer. The nanocomposites containing a very low content of ZnO nanoparticles (0.06 wt %) possessed the optimal optical properties, namely high‐visible light transparency and high‐UV light shielding efficiency. Consequently, the as‐prepared ZnO/epoxy nanocomposites are promising for use as novel packaging materials in lighting emitting diodes technology. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Morphology,mechanical properties and electromagnetic shielding effectiveness of poly(styrene‐b‐ethylene‐ran‐butylene‐b‐styrene)/carbon nanotube nanocomposites: effects of maleic anhydride,carbon nanotube loading and processing method

Nanocomposites based on poly(styrene‐b‐ethylene‐ran‐butylene‐b‐styrene) (SEBS) and carbon nanotubes (CNTs) (SEBS/CNT) as well as SEBS grafted with maleic anhydride (SEBS‐MA)/CNT were successfully prepared for electromagnetic shielding applications. Both SEBS/CNT and SEBS‐MA/CNT nanocomposites were prepared by melt compounding and were post‐processed using two different techniques: tape extrusion and compression moulding. The different nanocomposites were characterized by Raman spectroscopy and rheological analysis. Their mechanical properties, electrical properties (10^-2–10⁵ Hz) and electromagnetic shielding effectiveness (8.2–12.4 GHz) were also evaluated. The results showed that the CNT loading amount, the presence of MA in the matrix and the shaping technique used strongly influence the final morphologies and properties of the nanocomposites. Whilst the nanocomposite containing 8 wt% CNTs prepared by compression moulding presented the highest electromagnetic shielding effectiveness (with a value of 56.73 dB, which corresponds to an attenuation of 99.9996% of the incident radiation), the nanocomposite containing 5 wt% CNTs prepared by tape extrusion presented the best balance between electromagnetic and mechanical properties and was a good candidate to be used as an efficient flexible electromagnetic interference shielding material. © 2018 Society of Chemical Industry     

Design of organic electroluminescent displays with ultraviolet‐shielding filters

The electroluminescence properties of polymer light‐emitting devices with and without an ultraviolet (UV)‐shielding filter were studied. The polymer light‐emitting devices were fabricated with poly(2‐methoxy‐5,2′‐ethyl‐hexyloxy‐1,4‐phenylene vinylene) as the light emitter and poly(ethylenedioxy thiophene) as the hole‐transporting material. The UV‐shielding filter was composed of alternating TiO₂ and SiO₂ dielectric multilayers made by a physical vacuum deposition process. The current density, brightness, and photometric efficiency decreased significantly for the polymer light‐emitting device without the UV‐shielding filter after irradiation by UV light. The decay of PLEDs due to UV degradation was greatly reduced by the UV‐shielding filter. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 1432–1436, 2004     

In situ preparation of polyimide/amino‐functionalized carbon nanotube composites and their properties

In order to improve the dispersion of carbon nanotubes (CNTs) in polyimide (PI) matrix and the interfacial interaction between CNTs and PI, 4,4′‐diaminodiphenyl ether (ODA)‐functionalized carbon nanotubes (CNTs‐ODA) were synthesized by oxidation and amidation reactions. The structures and morphologies of CNTs‐ODA were characterized using Fourier transform infrared spectrometer, transmission electron microscopy, and thermal gravimetric analysis. Then a series of polyimide/amino‐functionalized carbon nanotube (PI/CNT‐ODA) nanocomposites were prepared by in situ polymerization. CNTs‐ODA were homogeneously dispersed in PI matrix. The influence of CNT‐ODA content on mechanical properties of PI/CNT‐ODA nanocomposites was investigated. It was found that the mechanical properties of nanocomposites were enhanced with the increase in CNT‐ODA loading. When the content of CNTs‐ODA was 3 wt%, the tensile strength of PI/CNT‐ODA nanocomposites was up to 169.07 MPa (87.11% higher than that of neat PI). The modulus of PI/CNTs‐ODA was increased by 62.64%, while elongation at break was increased by 66.05%. The improvement of the mechanical properties of PI/CNT‐ODA nanocomposites were due to the strong chemical bond and interfacial interaction between CNTs‐ODA and PI matrix. POLYM. COMPOS., 35:1952–1959, 2014. © 2014 Society of Plastics Engineers     

Improved environmental stability,electrical and EMI shielding properties of vapor‐grown carbon fiber‐filled polyaniline‐based nanocomposite

An all polymeric electrically conductive thermoset adhesive resin system is prepared for future lightning strike protection applications. Polyaniline (PANI)‐based hybrid nano‐composite is prepared by incorporating high apparent‐density type vapor grown carbon fiber (VGCF‐H) as additional conductive filler. Electrical, mechanical and electromagnetic interference (EMI) shielding properties of PANI‐dodecylbenzene sulfonic acid (DBSA), and divinylbenzene (DVB) system are improved with addition of VGCF‐H. Different weight percentages of VGCF‐H in the PANI‐DBSA/DVB matrix, are studied, and their effect on composite's properties are investigated. Electrical conductivity up to 1.89 S/cm with the addition of 5 wt% VGCF‐H is achieved, which is almost 300% improvement compared with previous system. However, the maximum flexural modulus is obtained at 3 wt% of VGCF‐H. The change in the electronic structure of PANI with the addition of VGCF‐H is investigated using Fourier transform infrared (FT‐IR) analysis. Rheological study and Differential scanning calorimetry analysis were employed to show the effect of VGCF‐H concentration on curing profile of the nanocomposites. EMI shielding properties of the composite with and without VGCF‐H are measured in X‐band frequencies and compared. Composite with 5 wt% VGCF‐H has shown EMI shielding effectiveness about 51 dB in X‐band, which is higher than the composite without VGCF‐H (around 22 dB). POLYM. ENG. SCI., 59:956–963, 2019. © 2018 Society of Plastics Engineers     

Preparation and characterization of transparent ZnO/epoxy nanocomposites with high-UV shielding efficiency

Transparent ZnO/epoxy nanocomposites with high-UV shielding efficiency were reported in this paper. First, zinc oxide (ZnO) precursor was synthesized via the homogeneous precipitation method and ZnO nanoparticles were then made by calcination of the precursor at different temperature. The structural properties of the as-prepared ZnO nanoparticles were studied in detail using thermogravimetry (TGA), differential thermal analysis (DTA), X-ray diffractometer (XRD), Fourier transform infrared spectrometer (FT-IR) and transmission electron microscopy (TEM), respectively. Transparent ZnO/epoxy nanocomposites were subsequently prepared from transparent epoxy (EP-400) and as-prepared ZnO nanoparticles via in situ polymerization. Optical properties of ZnO/epoxy nanocomposites, namely visible light transparency and UV light shielding efficiency, were studied using an ultraviolet-visible (UV-vis) spectrophotometer. The optical properties of the as-obtained nanocomposites were shown to depend on ZnO particle size and content. The nanocomposite containing a very low content (0.07% in weight) of ZnO nanoparticles with an average particle size of 26.7 nm after calcination at 350 °C possessed the most optimal optical properties, namely high-visible light transparency and high-UV light shielding efficiency, that are desirable for many important applications.     

Low‐Dielectric Constant and Low‐Temperature Curable Polyimide/POSS Nanocomposites

With the rapid development of ultra large scale integrated circuits, low stress, low thermal expansion, low dielectric constant, and low temperature curable (<250 °C) polyimides (PIs) with excellent mechanical, thermal properties are required. Unfortunately, high curing temperatures above 300 °C and limited dielectric property still remain to be solved. Herein, a new type of aminopropyl isobutyl polysilsesquioxane (POSS) with single vertex activity is introduced by in situ polymerization resulting in the PI‐POSS nanocomposites which exhibit a low dielectric constant (κ ≤ 2.6). Furthermore, low‐temperature curing at 200 °C (99.4% imidization) under the catalysis of quinoline is also achieved. The as‐prepared PI‐POSS nanocomposites also show excellent mechanical properties of which the tensile strength can reach up to 148 MPa and the elongation at break achieves 98%. Moreover, the temperature of weight loss 5% is as high as 550 °C and the glass transition temperature can also reach 349 °C. The as‐prepared PI‐POSS nanocomposites prove excellent electrical performance and mechanical properties, showing a huge market prospect of 5G chip packaging and millimeter wave antenna in the future.     

Synthesis and characterization of polyimide/multi‐walled carbon nanotube nanocomposites

Polyimide/multi‐walled carbon nanotube (PI‐MWNT) nanocomposites were fabricated by an in situ polymerization process. Chemical compatibility between the PI matrix and MWNTs is achieved by pretreatment of the carbon nanotubes in a mixture of sulfuric acid and nitric acid. The dispersion of MWNTs in the PI matrix was found to be enhanced significantly after acid modification. The glass transition (T_g) and decomposition (T_d) temperature of PI‐MWNT nanocomposites were improved as the MWNT content increased from 0.5 to 15 wt%. The storage modulus of the PI/MWNT nanocomposites is nine times higher than that of pristine PI at room temperature. The tensile strength of PI doubles when 7 wt% MWNTs is added. The dielectric constant of the PI‐MWNT nanocomposites increased from 3.5 to 80 (1 kHz) as the MWNT content increased to 15 wt%. The present study demonstrates that enhanced mechanical properties can be obtained through a simple in‐situ polymerization process. POLYM. COMPOS., 2008. © 2008 Society of Plastics Engineers     

High‐performance electromagnetic interference shielding material based on an effective mixing protocol

A facile and economic method is developed for the fabrication of new lightweight materials with high electromagnetic interference (EMI) shielding performance, good mechanical properties and low electrical percolation threshold through melt mixing. Electrical properties, DC conductivity, EMI shielding performance and mechanical properties of poly(trimethylene terephthalate) (PTT)/multiwalled carbon nanotube (MWCNT) nanocomposites with varying filler loading of MWCNTs were investigated. High‐resolution transmission electron microscopy was used to determine the distribution of MWCNTs in the PTT matrix. The newly developed nanocomposites show excellent dielectric and EMI shielding properties. Theoretical electrical percolation threshold was achieved at 0.21 wt% loading of MWCNTs, due to the high aspect ratio and the three‐dimensional network formation of MWCNTs. Experimental DC conductivity values were compared with those of theoretical models such as the Voet, Bueche and Scarisbrick models, which showed good agreement. The PTT/3% MWCNT composite showed an EMI shielding value of ～38 dB (99.99% attenuation) with a sample thickness of 2 mm. Power balance was used to determine the actual contribution of reflection, absorption and transmission loss to the total EMI shielding value. The nanocomposites showed good tensile and impact properties and the composite with 2% MWCNTs exhibited an improvement in tensile strength of as much as 96%. © 2018 Society of Chemical Industry     

The structure‐property relationship of novolac cured epoxy resin/clay nanocomposites

Intercalated or exfoliated novolac cured epoxy resin nanocomposites were prepared with two different kinds of layered silicates – montmorillonite (PK‐802) and nontronite (PK‐805). The bifunctional modifiers (PI/BEN or MI/BEN) are used to modify the clays for improvement of the properties of polymer where benzalkonium chloride (BEN) acts as a compatibilizing agent and 2‐phenylimidazole (PI) or 2‐methylimidazole (MI) as the accelerators. Both the compatibilizer and accelerator are simultaneously intercalated into the gallery space of pure clays to form the modified clay. The novolac cured epoxy nanocomposites are prepared with these modified clays by crosslinking polymerization reaction. The properties of novolac cured epoxy/clay nanocomposites were characterized by wide‐angle X‐ray diffraction (WAXD), thermo‐gravimetric analysis (TGA), dynamic mechanical analysis (DMA), and transmission electron microscopy (TEM) methods. According to the measurement, these novolac cured epoxy‐clay nanocomposites have been shown the significant improvement in the thermal, mechanical, and barrier properties that may be applied to make printed circuit board. POLYM. ENG. SCI., 2008. © 2008 Society of Plastics Engineers     

Fabrication of highly refractive barium‐titanate‐incorporated polyimide nanocomposite films with high permittivity and thermal stability

Crystalline nanoparticles of barium titanate (BT) are incorporated into polyimide (PI) to fabricate highly refractive, anti‐UV‐degradable nanocomposite films with high permittivity and thermal stability. For homogeneous incorporation of BT nanoparticles into the PI matrix, the BT nanoparticles are surface modified by phthalimide with the aid of a silane coupling agent as a scaffold. The PI nanocomposites are prepared by in situ polymerization in which a diphthalic anhydride and a diamine are used to form the PI matrix in the presence of the surface‐modified nanoparticles. The refractive index of the transparent nanocomposite films reaches 1.85 at a nanoparticle content of 59 vol% with a high dielectric constant of ε = 37 and thermal stability up to 460 °C. Copyright © 2012 Society of Chemical Industry     

Synthesis and characterization of a Zr‐containing silicate‐based epoxy‐functional polymer nanocomposite system

As a continuation of efforts to explore the potential of certain types of polymer nanocomposites to be successful candidates as dental restoration/adhesion materials, a Zr‐containing and organically modified silicate‐based material system with epoxy functionality was prepared by use of a sol–gel synthesis method, and UV light‐ and visible light (VL)‐curing processes. Comparative influences of the synthesis and processing parameters on the mechanical, thermal, and microstructural/nanostructural properties of the system were detailed. Zr‐containing species proved to more effectively catalyze the epoxy polymerization/crosslinking reactions than those containing Ti. Incorporation of Zr into the nanocomposite network led to significantly advanced mechanical properties. An elastic (Young's) modulus value of 23 MPa was achieved. The system with relatively high Zr content was successfully obtained, which also had higher thermal stability. Overall observations and results suggested that Zr content, and the UV light‐ or VL‐curing process could be capitalized on to modify the structure, and to improve the final properties of these material systems, which indicated a prospective opportunity for this material system to be utilized in dental restoration/adhesion applications. POLYM. ENG. SCI., 55:792–798, 2015. © 2014 Society of Plastics Engineers     

Polymer nanocomposite‐based shielding against diagnostic X‐rays

Lead is commonly used in medical radiology departments as a shielding material. Lead‐based protective materials are also used by clinical personnel during X‐ray image‐guided interventional radiology (IVR) procedures. However, lead is extremely toxic and prolonged exposure to it can result in serious health concerns. Polymer composites, on the other hand, can be designed to be lead‐free in addition to being lightweight, conformable, cost effective, and potentially capable of significantly attenuating X‐rays. Nanomaterials have unique material properties that can be exploited to develop novel lead‐free radiation‐protection materials. In this study, polydimethylsiloxane (PDMS) nanocomposites were fabricated using different weight percentages (wt %) of bismuth oxide (BO) nanopowder. The attenuation properties of the nanocomposites were characterized using diagnostic X‐ray energies from 40 to 150 kV tube potential and were compared to the attenuation characteristics of 0.25‐mm‐thick pure lead sheet. The PDMS/BO nanocomposite (44.44 wt% of BO and 3.73‐mm thick) was capable of attenuating all the scattered X‐rays generated at a tube potential of 60 kV, which is the beam energy commonly employed in IVR. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2013     

Mechanical,thermal and electrical properties of multi‐walled carbon nanotube/aluminium nitride/polyetherimide nanocomposites

A series of polyimide‐based nanocomposites containing polyimide‐grafted multi‐walled carbon nanotubes (PI‐g MWCNTs) and silane‐modified ceramic (aluminium nitride (AlN)) were prepared. The mechanical, thermal and electrical properties of hybrid PI‐g MWCNT/AlN/polyetherimide nanocomposites were investigated. After polyimide grafting modification, the PI‐g MWCNTs showed good dispersion and wettability in the polyetherimide matrix and imparted excellent mechanical, electrical and thermal properties. The utilization of the hybrid filler was found to be effective in increasing the thermal conductivity of the composites due to the enhanced connectivity due to the high‐aspect‐ratio MWCNT filler. The use of spherical AlN filler and PI‐g MWCNT filler resulted in composite materials with enhanced thermal conductivity and low coefficient of thermal expansion. Results indicated that the hybrid PI‐g MWCNT and AlN fillers incorporated into the polyetherimide matrix enhanced significantly the thermal stability, thermal conductivity and mechanical properties of the matrix. Copyright © 2012 Society of Chemical Industry     

Size‐dependent optical properties of transparent,spin‐coated polystyrene/ZnO nanocomposite films

Zinc oxide (ZnO) nanoparticles are synthesized using a simple chemical method at room temperature. A variation in molar concentration of the precursor, potassium hydroxide, from 0.25 to 0.01 mol L^?1 is accompanied by a decrease in the average size of the nanoparticles. These nanoparticles are used for the preparation of polystyrene/ZnO nanocomposite films using the spin‐coating technique. These films are found to be highly transparent throughout the visible region and absorb UV light in the region from 395 to190 nm, almost covering the near and middle UV ranges (400 to 200 nm). This observation highlights the possible prospects of these films in UV shielding applications. The wavelength corresponding to the onset of UV absorption is found to be blue shifted with a decrease in size of the ZnO particles in the composite films due to confinement effects. The photoluminescence spectra of the composite films also change as a function of particle size. The emissions at longer wavelength due to defects and impurity‐related states in ZnO are almost quenched as a result of surface modification by the polymer matrix. The observed band‐gap enlargement with a decrease in size of the ZnO particles in the composite films is significant for band‐gap engineering of nanoparticles for various applications. Copyright © 2011 Society of Chemical Industry     

In situ preparation of transparent polyimide nanocomposite with a small load of graphene oxide

Polyimide (PI) nanocomposites with 4,4′‐bisphenol A dianhydride, 4,4′‐oxydiphthalic anhydride, and diaminodiphenyl methane (MDA) as comonomers and functionalized with graphene oxide (GO), were prepared by in situ polymerization. Only a small amount of GO (0.03–0.12 wt %) is added to improve the mechanical properties of PI and to avoid a substantial decrease of PI transparence. The nanocomposites are characterized by FTIR, X‐ray diffraction, thermogravimetric analysis, transmission electron microscope, tensile test, and UV‐vis spectroscopy. It is demonstrated that the PI/GO composite films possess transmittance of above 80% at wavelengths of 500–800 nm when the GO content is under 0.12 wt %, while the stress intensity and Young's modulus are improved by 29 and 25%, respectively. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013