Effect of friction between powder and a mandrel on densification of iron powder during cold isostatic pressing

The effects of friction between the powder and the mandrel on densification behavior of metal powder were investigated under cold isostatic pressing. The friction coefficients between the powder and the mandrels with different surface roughness were determined from the relationship between the compaction pressure and the ejection pressure of the mandrel from powder compacts. The elastoplastic constitutive equations based on the yield function of Shima and Oyane were implemented into a finite element program (ABAQUS) to simulate compaction responses of metal powders during cold isostatic pressing. Finite element results were compared with experimental data for pure iron powder under cold isostatic pressing.     

Genetic algorithm-based numerical optimization of powder compaction process with temperature-dependent cap plasticity model

In this paper, a shape optimization technique is presented for the cold and hot isostatic pressing of metal powders based on the genetic algorithm (GA) approach. The GA technique is used to obtain the desired optimal compacted component by changing the boundaries of component and verifying the prescribed constraints. The coupled thermomechanical analysis of hot isostatic pressing is employed for metal powders during densification process. The numerical modeling of hot powder compaction simulation is performed based on the large deformation formulation, temperature-dependent cap plasticity model, and frictional contact algorithm. The modified cap plasticity takes the temperature effects into the numerical simulation of highly nonlinear behavior of metal powder. Finally, numerical examples are analyzed to demonstrate the feasibility of proposed optimization algorithm for designing powder components in the cold- and hot-forming processes of powder compaction.     

Near-net-shape forming of alumina powder under hot pressing and hot isostatic pressing

Densification and deformation of alumina powder under hot pressing and hot isostatic pressing were investigated. Finite element calculations were performed by implementing constitutive equations for grain growth, power law creep and diffusional creep in the user defined subroutine CREEP of ABAQUS. An alumina compact of valve head shape was produced under hot pressing and its forming process was predicted by the finite element calculation. Densification behavior of an alumina powder compact encapsulated by a stainless steel container was also investigated under hot isostatic pressing. Inhomogeneous deformations of an alumina powder compact due to the shield effect of a container during hot isostatic pressing were observed experimentally and predicted by the finite element analysis.     

Densification behavior of tungsten-fiber-reinforced copper powder compacts under hot isostatic pressing

Densification behavior of tungsten-fiber-reinforced copper powder compacts under hot isostatic pressing was investigated. Hot isostatic pressing was carried out for a bundle of copper-coated tungsten fibers in copper powder. Due to tungsten-fibers and copper coating layers, the densification rate of a tungsten-fiber-reinforced copper powder compact was slower than that of pure copper powder. The constitutive equations by McMeeking and co-workers and by Abouaf and co-workers were implemented into a finite element program (ABAQUS) to analyze densification behavior of tungsten-fiber-reinforced copper powder compacts under hot isostatic pressing. Finite element calculations were compared with experimental results for the variation of relative density with time for copper powder compacts during hot isostatic pressing. Density distributions in copper powder compacts were also investigated by comparing experimental results with finite element calculations.     

采用GPS+HIP生产工艺制造Al2O3基陶瓷刀片

介绍了采用GPS +HIP生产工艺制造Al2 O3 基陶瓷刀片所涉及的混料、压制、排胶、气氛保护烧结(GPS)、热等静压 (HIP)处理、刀片刃磨等主要生产工序     

Synthesis of silicon carbide ceramics from a polysilastyrene at low temperatures

The conventional route for preparation of silicon carbide ceramics is by the use of pressureless sintering, hot pressing, or hot isostatic pressing of silicon carbide starting powders. High sintering temperatures (2073–2473 K) and the addition of sintering additives are normally used to enhance densification. These sintering additives, however, form second phases at grain boundaries which impair the mechanical properties of the material, particularly at high temperatures. It is therefore desirable that new processing routes are developed that overcome these difficulties. A proposed route is to use a polymeric pressure which can provide a Silicon carbide matrix as binding agent for silicon carbide powders, thus making the requirement for high temperatures and sintering additives unnecessary. This paper reports observations of the direct transformation of a polymeric precursor into amorphous Si–C, and crystalline SiC at low temperatures, and the use of this precursor as a binder for the production of SiC powder/ex-precursor SiC composites.     

Densification of mixed metal powder at high temperature

Densification behaviors of mixed metal powder under high temperature were investigated. Experimental data of mixed copper and tool steel powder with various volume fractions of Cu powder were obtained under hot isostatic pressing and hot pressing. By mixing the creep potentials of McMeeking and co-workers and of Abouaf and co-workers originally for pure powder, the mixed creep potentials with various volume fractions of Cu powder were employed in the constitutive models. The constitutive equations were implemented into a finite element program (ABAQUS) to compare with experimental data for densification of mixed powder under hot isostatic pressing and hot pressing. Finite element calculations by using the creep potentials of Abouaf and co-workers agreed reasonably well with experimental data, however, those by the model of McMeeking and co-workers underestimate experimental data as observed in the case of pure metal powders.     

Densification behavior of aluminum alloy powder under cold compaction

Densification behavior of aluminum alloy (Al6061) powder was investigated under cold compaction. Experimental data were obtained under triaxial compression with various loading conditions. A special form of the Cap model was proposed from experimental data of Al6061 powder under triaxial compression. The proposed yield function and several other yield functions in the literature were implemented into a finite element program (ABAQUS) to compare with experimental data for densification behavior of Al6061 powder under cold isostatic pressing and die compaction. The agreement between finite element calculations from the proposed yield function and experimental data is very good under cold isostatic pressing and die compaction.     

Model for compaction of metal powders

A new yield criterion for metal powder compaction based on continuum mechanics has been proposed. It includes three parameters to characterize the geometric hardening of powder compact and strain hardening of incompressible metal matrix. The elasto-plastic finite element method to describe compaction of metal powders has been formulated using the new yield criterion. The values of parameters in the yield criterion could be determined through cold isostatic pressing (CIP). The finite-element method was used to simulate compaction behaviour of copper powders of different shape and mean particle size.     

Creep densification of copper powder compact

Densification of metal powder under high temperature processing was investigated. Experimental data were obtained for copper powder under hot isostatic pressing, hot pressing and uniaxial creep compression. Theoretical calculations from the constitutive models by McMeeking and co-workers were compared with the experimental data. The agreements between experimental data and theoretical calculations are reasonably good when hydrostatic stress is dominant, but not as good when deviatoric stress increases.