Luminescent properties of Gd2Ti2O7: Eu phosphor films prepared by sol-gel process

Gd₂Ti₂O₇: Eu³⁺ thin film phosphors were fabricated by a sol-gel process. X-ray diffraction (XRD), atomic force microscopy (AFM) and photoluminescence (PL) spectra as well as lifetimes were used to characterize the resulting films. The results of XRD indicated that the films began to crystallize at 800 °C and the crystallinity increased with the elevation of annealing temperatures. Uniform and crack free phosphor films were obtained, which mainly consisted of grains with an average size of 70 nm. The doped Eu³⁺ showed orange-red emission in crystalline Gd₂Ti₂O₇ phosphor films due to an energy transfer from Gd₂Ti₂O₇ host to them. Both the lifetimes and PL intensity of the Eu³⁺ increased with increasing the annealing temperature from 800 to 1000 °C, and the optimum concentrations for Eu³⁺ were determined to be 9 at.%. of Gd³⁺ in Gd₂Ti₂O₇ film host.     

Luminescence of SrGdGa3O7:RE(RE = Eu, Tb) phosphors and energy transfer from Gd to RE

Eu³⁺- and Tb³⁺-activated SrGdGa₃O₇ phosphors were synthesized by the solid-state reaction and their luminescence properties were investigated. Sr(Gd_1 − xEu_x)Ga₃O₇ and Sr(Gd_1 − xTb_x)Ga₃O₇ formed continuous solid solution in the range of x = 0-1.0. Unactivated SrGdGa₃O₇ exhibited a typical characteristic excitation and emission of Gd ion. The SrGdGa₃O₇:xEu³⁺ and SrGdGa₃O₇:xTb³⁺ phosphors also showed the well-known Eu³⁺ and Tb³⁺ excitation and emission. The energy transfer from Gd³⁺ to Eu³⁺ and Tb³⁺ were verified by photoluminescence spectra. The dependence of photoluminescence intensity on Eu³⁺ and Tb³⁺ concentration were also studied in detail and the photoluminescence (PL) intensity of SrGdGa₃O₇:Eu and SrGdGa₃O₇:Tb were compared with commercial phosphors, Y₂O₃:Eu and LaPO₄:Ce,Tb. The luminescence decay measurements showed that the lifetimes of Eu³⁺ and Tb³⁺ were in the range of microsecond. The energy transfer from Gd³⁺ to Tb³⁺ was also observed in decay curve.     

Synthesis and photoluminescence properties of SrLu2O4:Eu superfine phosphor

Superfine powder SrLu₂O₄:Eu³⁺ was synthesized with a precursor prepared by an EDTA - sol-gel method at relatively low temperature using metal nitrate and EDTA as starting materials. The heat decomposition mechanism of the precursor, formation process of SrLu₂O₄:Eu³⁺and the properties of the particles were investigated by thermo-gravimetric (TG) - differential thermal analysis (DTA), X-ray diffraction (XRD), transmission electron microscopy (TEM) and photoluminescence (PL) analyses. The results show that pure SrLu₂O₄:Eu³⁺ superfine powder has been produced after the precursor was calcinated at 900 °C for 2 h and has an elliptical shape and an average diameter of 80-100 nm. Upon excitation with 250 nm light, all the SrLu₂O₄:Eu³⁺ powders show red and orange emissions due to the 4f-4f transitions of Eu³⁺ ions. The highest photoluminescence intensity at 610 nm was found at a content of about 6 mol% Eu³⁺. Splitting of the ⁵D₀-⁷F₁ emission transition revealed that the Eu³⁺ ions occupied two nonequivalent sites in the crystallite by substituting Lu³⁺ ions.     

Novel Dy-doped Ca2Gd8(SiO4)6O2 white light phosphors for Hg-free lamps application

The luminescent properties of Ca₂Gd_8(1−x)(SiO₄)₆O₂:xDy³⁺ (1% ≤ x ≤ 5%) powder crystals with oxyapatite structure were investigated under vacuum ultraviolet excitation. In the excitation spectrum, the peaks at 166 nm and 191 nm of the vacuum ultraviolet region can be assigned to the O²⁻ → Gd³⁺, and O²⁻ → Dy³⁺ charge transfer band respectively, which is consistent with the theoretical calculated value using Jφrgensen's empirical formula. While the peaks at 183 nm and 289 nm are attributed to the f-d spin-allowed transitions and the f-d spin-forbidden transitions of Dy³⁺ in the host lattice with Dorenbos's expression. According to the emission spectra, all the samples exhibited excellent white emission under 172 nm excitation and the best calculated chromaticity coordinate was 0.335, 0.338, which indicates that the Ca₂Gd₈(SiO₄)₆O₂:Dy³⁺ phosphor could be considered as a potential candidate for Hg-free lamps application.     

Synthesis and photoluminescence of nano-Y2O3:Eu phosphors

We report nano-Y₂O₃:Eu³⁺ phosphors with particle size of about 50 nm and relatively high photoluminescence (PL) intensity which is close to the standard for application. The influences of the dope amount, the surfactant and the precipitation pH on the PL intensity, the particle size and the dispersion have been studied. It has been found that 4% is the best Eu³⁺ molar concentration to get the highest PL intensity for both nano- and micro-Y₂O₃:Eu³⁺. The addition of butanol as a surfactant inhibits the grain growth and the agglomeration of particles efficiently by reducing the oxygen bridge bonds. As the pH rises, the PL intensity and the particle size increase due to the formation of oxygen bridge bonds.     

Low-temperature synthesis of Y2SiO5:Eu powders using mesoporous silica and their luminescence properties

This paper reports the synthesis of Eu³⁺ ions-doped Y₂SiO₅ (Y₂SiO₅:Eu³⁺) powders by mesoporous template route. Using mesoporous silica SBA-15 as silica source, Y₂SiO₅:Eu³⁺ powders were prepared by solid-state reaction at a calcination temperature of 1300 °C without fluxes. The prepared Y₂SiO₅:Eu³⁺ powders were characterized by X-ray diffraction, scanning electron microscope, nitrogen adsorption-desorption isotherms, and photoluminescence spectroscopy. The results show that the crystalline Y₂SiO₅:Eu³⁺ particles are dense and have a morphology similar to SBA-15. The low calcination temperature is attributed to the high reactive activity of SBA-15 with large surface area and non-crystalline structure. The Y₂SiO₅:Eu³⁺ powders prepared at a low calcination temperature show luminescence properties similar to the reported results of Eu³⁺ doped-Y₂SiO₅ samples prepared at high temperatures.     

Synthesis and optical properties of (Gd1−x,Eux)2O2SO4 nano-phosphors by a novel co-precipitation method

(Gd_1−x,Eu_x)₂O₂SO₄ nano-phosphors were synthesized by a novel co-precipitation method from commercially available Gd₂O₃, Eu₂O₃, H₂SO₄ and NaOH starting materials. Composition of the precursor is greatly influenced by the molar ratio of NaOH to (Gd_1−x,Eu_x)₂(SO₄)₃ (the m value), and the optimal m value was found to be 4. Fourier transform infrared spectrum (FT-IR) and thermal analysis show that the precursor (m = 4) can be transformed into pure (Gd_1−x,Eu_x)₂O₂SO₄ nano-phosphor by calcining at 900 °C for 2 h in air. Transmission electron microscope (TEM) observation shows that the Gd₂O₂SO₄ phosphor particles (m = 4) are quasi-spherical in shape and well dispersed, with a mean particle size of about 30-50 nm. Photoluminescence (PL) spectroscopy reveals that the strongest emission peak is located at 617 nm under 271 nm light excitation, which corresponds to the ⁵D₀ → ⁷F₂ transition of Eu³⁺ ions. The quenching concentration of Eu³⁺ ions is 10 mol% and the concentration quenching mechanism is exchange interaction among the Eu³⁺ ions. Decay study reveals that the ⁵D₀ → ⁷F₂ transition of Eu³⁺ ions has a single exponential decay behavior.     

Luminescence enhancement of Y2O3:Eu and Y2SiO5:Ce,Tb core particles with SiO2 shells

This paper reports on the luminescence and microstructural features of oxide nano-crystalline (Y₂O₃:Eu³⁺) and submicron-sized (Y₂SiO₅:Ce³⁺,Tb³⁺) phosphor cores, produced by two different synthesis techniques, and subsequently coated by an inert shell of SiO₂ using a sol-gel process. The shells mitigate the detrimental effect of the phosphor particle surfaces on the photoluminescence emission properties, thereby increasing luminous output by 20-90%, depending on the core composition and shell thickness. For Y₂O₃:Eu³⁺, uniformly shaped, narrow particle size distribution core/shell particles were successfully fabricated. The photoluminescence emission intensity of core nanoparticles increased with increasing Eu³⁺ activator concentration and the luminescence emission intensity of the core/shell particles was 20-50% higher than that of the core particles alone. For Y₂SiO₅:Ce³⁺,Tb³⁺, the core/shell particles showed enhancement of the luminescence emission intensity of 35-90% that of the core particles, depending on the SiO₂ shell thickness.     

Hydrothermal synthesis and luminescent properties of Y2O3:Tb and Gd2O3:Tb microrods

One-dimensional (1D) Y₂O₃:Tb³⁺ and Gd₂O₃:Tb³⁺ microrods have been successfully prepared through a large-scale and facile hydrothermal method followed by a subsequent calcination process in N₂/H₂ mixed atmosphere. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (IR), thermogravimetric analysis (TGA), energy-dispersive X-ray spectra (EDX), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED), photoluminescence (PL) and cathodoluminescence (CL) spectra as well as kinetic decays were used to characterize the samples. The as-formed products via the hydrothermal process could transform to cubic Y₂O₃:Tb³⁺ and Gd₂O₃:Tb³⁺ with the same morphology and slight shrinking in size after a postannealing process. Both Y₂O₃:Tb³⁺ and Gd₂O₃:Tb³⁺ microrods exhibit strong green emission corresponding to ⁵D₄ → ⁷F₅ transition (542 nm) of Tb³⁺ under UV light excitation (307 and 258 nm, respectively), and low-voltage electron beam excitation (1.5 → 3.5 kV), which have potential applications in fluorescent lamps and field emission displays.     

Preparation of highly ordered growth of single-crystalline Gd2O2S:Eu nanostructures

A simple and facile template-assisted hydrothermal route has been demonstrated for the shape-selective preparation of highly ordered single-crystalline Gd₂O₂S:Eu³⁺ nanostructures, such as nanotubes, nanorods and nanoflowers. These fabricated nanostructures possess desirable atomic structures, surfaces, morphologies and properties to meet the growing demands and specific requirements of new technologies. The concentration of precursor chemicals, the temperature, the reaction time, and the use of a capping agent are key factors in the morphological control of Gd₂O₂S:Eu³⁺ nanostructures. The morphology and the phase composition of the prepared nanostructures were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), energy disperse spectroscopy (EDS) and photoluminescence (PL). We believe this technique will be readily adopted in realizing other forms of various nanostructured materials.     

Vacuum ultraviolet excited photoluminescence properties of novel Na3Y9O3(BO3)8:Eu phosphor

The novel vacuum ultraviolet (VUV) excited Na₃Y₉O₃(BO₃)₈:Eu³⁺ red phosphor was synthesized and the photoluminescence (PL) properties were investigated. The phosphor showed strong VUV PL intensity, large quenching concentration (40 mol%) and good chromaticity (0.649, 0.351). The Eu³⁺-O²⁻ charge transition (CT) was observed to be at a higher energy (232 nm, 5.35 eV). The host absorption at 127-166 nm was broad and strong when monitoring the Eu³⁺ emission, which indicated that energy transfer from the host-lattice to the Eu³⁺ ions was efficient in Na₃Y₉O₃(BO₃)₈:Eu³⁺. These excellent VUV PL properties were revealed to be correlated with the unique isolated layer-type structure of Na₃Y₉O₃(BO₃)₈ host. The results showed that the Na₃Y₉O₃(BO₃)₈:Eu³⁺ would be a good candidate for VUV-excited red phosphor.     

A novel red emitting phosphor CaIn2O4:Eu, Sm with a broadened near-ultraviolet absorption band for solid-state lighting

Red phosphor of CaIn₂O₄:Eu³⁺, Sm³⁺ is synthesized by solid state reaction. The ⁵D₀ → ⁷F₂ transition of Eu³⁺ is dominantly observed in the photoluminescence spectrum, leading to a red emission of the phosphor. The doped Sm³⁺ is found to be efficient to sensitize the emission of Eu³⁺ and be effective to extend and strengthen the absorption of near-UV light with wavelength of 400-405 nm, and the energy transfer from Sm³⁺ to Eu³⁺ occurs and is discussed. The effect of the molar concentration of Sm³⁺ on the emission intensities of the phosphor CaIn₂O₄:Eu³⁺, Sm³⁺ is investigated. The temperature quenching effect is also measured from room temperature to 425 K, and the emission intensity of the phosphor at 425 K shows about 85% of that at room temperature. Furthermore, the chromaticity coordinates, the emission intensities and the conversion efficiencies of CaIn₂O₄:Eu³⁺, Sm³⁺ are compared to those of the conventional red phosphor of Y₂O₂S:Eu³⁺.     

Investigation of Na3GdP2O8:Tb as a potential green-emitting phosphor for plasma display panels

The photoluminescent properties of a series of Tb³⁺-doped Na₃GdP₂O₈ phosphors excitable by vacuum ultraviolet and ultraviolet light are reported. The host related absorption, f-f and f-d transitions of Gd³⁺ and Tb³⁺, and charge transfer of O²⁻ → Gd³⁺ and O²⁻ → Tb³⁺ are assigned. Under 147 nm light excitation, Na₃GdP₂O₈:Tb³⁺ phosphors show efficient green emissions with a dominant peak at 545 nm. The optimal sample Na₃Gd_0.4Tb_0.6P₂O₈ shows a shorter decay time and a comparable brightness when compared with the commercial Zn₂SiO₄:Mn²⁺ green phosphor. These results demonstrate that it is a potential candidate for plasma display panels application.     

Engineering of luminescence from Gd2O3:Eu nanophosphors by pulsed laser deposition

Nanostructured Gd₂O₃:Eu³⁺ thin films were prepared by pulsed laser ablation technique. The dependence of structural, morphological and optical properties of these films on photoluminescence was systematically studied by varying the annealing temperature, Eu³⁺ incorporation concentration and laser fluence. The intensity of the XRD peak from (2 2 2) crystal plane was found to increase with annealing temperature in the range 973–1173 K. Films annealed at 1173 K show a preferential growth along (2 2 2) crystal plane of the cubic Gd₂O₃ and enhanced photoluminescence at 612 nm. XRD and Micro-Raman spectra and lattice strain investigations suggest that Eu³⁺ incorporation introduce a strong lattice distortion in Gd₂O₃ matrix. Morphological investigations using atomic force microscopy indicate a strong influence of the annealing process on the surface roughness and particle size. This kind of transparent thin film phosphors may promise for applications in flat-panel displays and X-ray imaging systems.     

Luminescent properties of long lasting phosphor Ca2MgSi2O7:Eu

Long afterglow phosphors (Ca_1−xEu_x)₂MgSi₂O₇ (0.002 ≤ x ≤ 0.02) were prepared by solid-state reactions under a weak reductive atmosphere. X-ray diffraction pattern, photoluminescence spectra, decay curve, afterglow spectra and thermoluminescence curves were investigated. The phosphors showed two emission peaks when they were excited by 343 nm, due to two types of Eu²⁺ centers existing in the Ca₂MgSi₂O₇ lattice. However, only one emission peak can be found in their afterglow spectra. Energy transfer between Eu²⁺ ions in inequivalent sites was found. A possible mechanism was presented and discussed. The afterglow decay time of Ca_1.998MgSi₂O₇:Eu_0.002 was nearly 12.5 h which means it was a good long lasting phosphor.     

Nanocomposite BaSO4/Y2O3:Eu powders prepared by heterogeneous nucleation processing

Forming core–shell-structured phosphor particles is an effect way to improve the properties of the rare-earth-doped inorganic luminescent systems, as well as to achieve a reduction in the amount of expensive rare earth metal. Heterogeneous nucleation processing is a commonly used method to prepared core–shell-structured particles. A nanocomposite BaSO₄/Y₂O₃:Eu³⁺ powder was prepared by coating BaSO₄ submicrospheres with nano-Y₂O₃:Eu³⁺ particles via heterogeneous nucleation processing. Thermogravimetric analysis and differential scanning calorimetry (TGA/DSC) were utilized to reveal the mechanism of the homogenous precipitation reaction process. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive spectroscopy (EDS) were utilized to characterize the BaSO₄/Y₂O₃:Eu³⁺ core–shell-structured phosphor particles. By controlling the hydrolysis of urea, BaSO₄ particles are well coated with the shell of Y₂O₃:Eu³⁺, and the nucleation of coating materials is predominantly heterogeneous rather than homogeneous. Photoluminescence spectra were utilized as well. The BaSO₄/Y₂O₃:Eu³⁺ particles show a red emission corresponding to ⁵D₀–⁷F₂ of Eu³⁺ under the excitation of ultraviolet.     

Synthesis and photoluminescence properties of a new red emitting phosphor: Ca3(VO4)2:Eu; Mn

A new red emitting phosphor, Ca₃(VO₄)₂:Eu³⁺; Mn²⁺, was synthesized by a citric acid sol-gel combustion method and characterized by XRD, TEM and photoluminescence (PL) spectra. The red emission located at about 613 nm was ascribed to ⁵D₀-⁷F₂ transition of Eu³⁺. And the red luminescence intensity changed with annealing temperature and concentration of Eu³⁺. The effect of the co-doped Mn²⁺ was also investigated systematically.     

Optical investigation of Eu:PbF2 ceramics and transparent glass-ceramics

This paper reports an optical investigation of glass-ceramics formed by annealing glasses with compositions 50 GeO₂-40 PbO-10 PbF₂-x EuF₃, x = [0.5; 1; 1.5; 2] and polycrystalline ceramics with composition 100 PbF₂, y EuF₃, with y = 5, 10, 15 and 20. For each material, the photoluminescence spectrum and the photoluminescence lifetimes of the ⁵D₀, ⁵D₁ and ⁵D₂ Eu³⁺ levels are measured. Occurrence of Eu³⁺:β-PbF₂ nanocrystallites in the glass-ceramics is confirmed and total ceramisation requires more than 10% of EuF₃ with respect to PbF₂ in the starting glass.In the Eu³⁺:β-PbF₂ ceramics and glass-ceramics, Eu³⁺ ions replace Pb²⁺ in their regular cubic site, but they interact together to form dimers and higher nuclearity clusters. These two species are easily distinguished according to their photoluminescence decay rate. For the EuF₃ rates investigated here, there are no isolated Eu³⁺ ions in the PbF₂ lattice.A preliminary investigation of the optical properties of co-doped Gd³⁺:Eu³⁺:β-PbF₂ ceramics was also performed. It shows that mixed Gd³⁺-Eu³⁺ dimers and clusters are formed, and that efficient Gd³⁺ → Eu³⁺ energy transfer occurs in these ceramics. The Pb²⁺ ions of the lattice may also be involved in the energy transfer process.     

Luminescent properties of Sr2P2O7:Eu,Mn phosphor under near UV excitation

The phosphors in the system Sr_2−x−yP₂O₇:xEu²⁺,yMn²⁺ were synthesized by solid-state reactions and their photoluminescence properties were investigated. These phosphors have strong absorption in the near UV region, which is suitable for excitation of ultraviolet light emitting diodes (UVLEDs). The orange-reddish emission of Mn²⁺ in these phosphors can be used as a red component in the tri-color system and may be enhanced by adjusting the Mn²⁺/Eu²⁺ ratio. The energy transfer from Eu²⁺ to Mn²⁺ is observed with a transfer efficiency of ∼0.45 and a critical distance of ∼10 Å. The results reveal that Sr_2−x−yP₂O₇:xEu²⁺,yMn²⁺ phosphors could be used in white light UVLEDs.