Hydrothermally-induced morphological transformation of GdVO4:Eu

The aim of the present study is to investigate the effect of a wide pH range on morphology and luminescence properties of europium-doped gadolinium vanadate (GdVO₄:Eu³⁺). GdVO₄:Eu³⁺ powders were hydrothermally synthesized at 180 °C for 24 h in a wide pH range. The as-synthesized powders were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and photoluminescence (PL) spectroscopy. The XRD results showed that GdVO₄:Eu³⁺ with the tetragonal structure formed at pH < 13 as a single phase and Gd(OH)₃ formed at pH ≥ 13 as a secondary phase. The SEM and TEM observations demonstrated the hydrothermally-induced morphological transformation of GdVO₄:Eu³⁺ powders by altering the pH of the synthesis solution. The possible mechanism for the morphological transformation was proposed. The intensities of the prominent peaks at 618 nm in the PL emission spectra of GdVO₄:Eu³⁺ powders considerably shift according to the specific morphology. The luminescence intensity of the octahedron- and rod-like GdVO₄:Eu³⁺ powders hydrothermally obtained at pH = 3 was the strongest one due to high packing density and high crystallinity as well as the extended reduction of the concentration of inherent defect states or adsorbed species.     

Hydrothermal synthesis and photoluminescence properties of nano-crystalline GdBO3:Eu phosphor

Nano-crystalline GdBO₃:Eu³⁺ was prepared by a hydrothermal method and the effects of some processing variables such as pH, temperature were investigated. The as-synthesized powders were spherical shaped agglomerates of nanoparticles. The luminescent properties were compared with samples synthesized by conventional solid-state reaction method. Both the photoluminescence intensity and chromaticity were improved and a red-shift in the CT band was observed for the hydrothermally synthesized samples. Possible mechanisms of phase formation were investigated and explanations for the changes in optical properties are proposed.     

Selective synthesis, characterization, and photoluminescence study of YPO4:Eu nanorods and nanoparticles

Two different morphological varieties of YPO₄:Eu³⁺ (nanorods and nanoparticles) have been synthesized by convenient template-assisted routes. A surfactant-mediated synthesis route generated the nanorods, while a complex based precursor solution method led to the formation of the nanoparticles. The nanorods have an average diameter of ∼33 nm and an average length of ∼290 nm, whereas the spherical nanoparticles show an average diameter of ∼34 nm. Upon photoluminescence study of the as-prepared samples, the chromaticity of the dopant ion was found to be sensitive to the host morphology as well as the preparative strategy adopted for sample fabrication.     

A novel red emitting phosphor CaIn2O4:Eu, Sm with a broadened near-ultraviolet absorption band for solid-state lighting

Red phosphor of CaIn₂O₄:Eu³⁺, Sm³⁺ is synthesized by solid state reaction. The ⁵D₀ → ⁷F₂ transition of Eu³⁺ is dominantly observed in the photoluminescence spectrum, leading to a red emission of the phosphor. The doped Sm³⁺ is found to be efficient to sensitize the emission of Eu³⁺ and be effective to extend and strengthen the absorption of near-UV light with wavelength of 400-405 nm, and the energy transfer from Sm³⁺ to Eu³⁺ occurs and is discussed. The effect of the molar concentration of Sm³⁺ on the emission intensities of the phosphor CaIn₂O₄:Eu³⁺, Sm³⁺ is investigated. The temperature quenching effect is also measured from room temperature to 425 K, and the emission intensity of the phosphor at 425 K shows about 85% of that at room temperature. Furthermore, the chromaticity coordinates, the emission intensities and the conversion efficiencies of CaIn₂O₄:Eu³⁺, Sm³⁺ are compared to those of the conventional red phosphor of Y₂O₂S:Eu³⁺.     

Y2O3:Eu microstructures: Hydrothermal synthesis and photoluminescence properties

Hexagonal microprisms of yttrium hydroxide (Y(OH)₃) with tuned diameter and height have been successfully prepared for the first time via a facile hydrothermal process using sodium citrate as the shape modifying agent. Y(OH)₃ microspheres with diameter of ca. 2.5 μm and microtubes with an average length about 13 μm, outer diameter about 3 μm and tube thickness about 800 nm were also obtained in current reaction systems. The possible formation mechanism for the Y(OH)₃ microstructures was briefly proposed. Y₂O₃:Eu³⁺ (5%) microstructures with similar morphologies was obtained after thermal treatment of the as-prepared Y(OH)₃:Eu³⁺ microstructures at 700 °C for 4 h. Results show that the relative emission intensity of the Y₂O₃:Eu³⁺ microprisms is about 8 times as those of the Y₂O₃:Eu³⁺ microtubes and microspheres under excitation of 259 nm ultraviolet light. The products were characterized by XRD, SEM, and EDS.     

Hydrothermal synthesis and photoluminescence of SrWO4:Tb novel green phosphor

Tb³⁺-doped SrWO₄ phosphors with a scheelite structure have been prepared by hydrothermal reaction. X-ray powder diffraction, field-emission scanning electron microscopy, photoluminescence excitation and emission spectra and decay curve were used to characterize the resulting samples. Scanning electron microscopy image showed that the obtained SrWO₄:Tb³⁺ phosphors appeared to be nearly spherical and their sizes ranged from 1 to 3 μm. Photoluminescence spectra indicated the phosphors emitted strong green light centered at 545 nm under ultraviolet light excitation. Because 12 at.% SWO₄:Tb³⁺ phosphor exhibits intensive green emission under 254 nm excitation in comparison with the commercial green fluorescent lamp phosphor (LaPO₄:Ce,Tb), the excellent luminescence properties make it a new promising green phosphor for fluorescent lamps application.     

Hydrothermal synthesis and vacuum ultraviolet-excited luminescence properties of novel Dy-doped LaPO4 white light phosphors

Novel LaPO₄:Dy³⁺ white light phosphors with monoclinic system were successfully synthesized by hydrothermal method at 240 °C. The strong absorption at around 147 nm in excitation spectrum was assigned to the host absorption which suggested that the vacuum ultraviolet-excited energy was efficiently transferred from the host to the Dy³⁺ ion. The f-d transition of Dy³⁺ ion was observed locating at 182 nm. Under 147 nm excitation, La_1−xPO₄:xDy³⁺ phosphor exhibited two emission bands locating at 571 nm (yellow) and 478 nm (blue) which corresponded to the hypersensitive transitions ⁴F_9/2-⁶H_13/2 and ⁴F_9/2-⁶H_15/2. It was the two emission bands that lead to the white light.     

Hydrothermal synthesis and luminescent properties of LaPO4:Eu 3D microstructures with controllable phase and morphology

Three types of Eu³⁺-doped LaPO₄ three-dimensional (3D) microstructures have been hydrothermally prepared by adjusting pH value and the molar ratio of La³⁺ and Eu³⁺ to phosphorus of Na₅P₃O₁₀ (Ln/P) at 180 °C. As the pH value was 0.15 and the molar ratio of Ln/P was in the range of 1/1 to 1/4, 5 μm urchinlike spheres composed of long nanorods of hexagonal LaPO₄:Eu were obtained. As the pH value was 1.00 and the molar ratio of Ln/P was 1/1, 3 μm hollow spheres consisting of short nanorods of monoclinic LaPO₄:Eu were prepared. Keeping the pH value at 1.0 and the molar ratio of Ln/P at 1/4, 6 μm core-shell spheres of monoclinic LaPO₄:Eu formed. Luminescent measurements were performed. Hollow spheres of monoclinic LaPO₄:Eu had the strongest emission intensity. However, the emission intensity of monoclinic core/shell structure was even lower than that of hexagonal LaPO₄:Eu urchinlike spheres.     

Preparation, characterization and luminescence of La2TeO6 phosphor doped with Eu

Phosphors of La₂TeO₆ doped with Eu³⁺ ions have been synthesized by the oxidation of the corresponding rare-earths oxytellurides of formula La_2−xEu_xO₂Te (x = 0.02, 0.06, and 0.1) at 1050 K. Powder X-ray diffraction confirms that the as prepared materials consist of the orthorhombic La₂TeO₆ as main phase. The photoluminescence (PL) of red-emitting La_2−xEu_xTeO₆ powder phosphors is reported. The emission spectrum, exhibits an intense emission peak due to ⁵D₀ → ⁷F₂ transition at 616 nm, which indicates that the Eu³⁺ ion occupies a non-centrosymmetric site in the host lattice. These materials could find application for use as lamp phosphors in the red region.     

Hydrothermal synthesis and magnetic properties of Co0.2Cu0.03Fe2.77O4 nanoparticles

Co_0.2Cu_0.03Fe_2.77O₄ nanoparticles with different morphologies have been synthesized directly via a simple hydrothermal method. The effects of pH value, precursor concentration, reaction temperature and surfactant on the particle size were discussed. X-ray diffraction analyses showed that the as-synthesized Co_0.2Cu_0.03Fe_2.77O₄ nanoparticles possessed typical spinel structure. Scanning electron microscope images showed different morphologies of the particles, including truncated octahedron and octahedron. It was indicated that well-dispersed Co_0.2Cu_0.03Fe_2.77O₄ nanoparticles can be synthesized at pH values ranging from 11 to 13, and reaction temperature of 160 °C. The particle size decreased from 18 to 10 nm after the addition of sodium dodecyl sulphate at the pH value of 9. The magnetic measurement showed that the as-prepared Co-Cu spinel ferrite nanoparticles possessed hard magnetic property.     

Synthesis and luminescence properties of novel LiSrPO4:Dy phosphor

Novel LiSrPO₄:Dy³⁺ phosphors for white light-emitting diodes (w-LEDs) were synthesized by the conventional solid-state reaction. X-ray powder diffraction (XRD) analysis confirmed the phase formation of LiSrPO₄:Dy³⁺ materials. Luminescence properties results showed that the phosphor could be efficiently excited by the UV–vis light region from 250 to 460 nm, and it exhibited blue (483 nm) and yellow (574 nm) emission corresponding to ⁴F_9/2 → ⁶H_15/2 transitions and ⁴F_9/2 → ⁶H₁₃/₂ transitions, respectively. The luminescence intensity of LiSrPO₄:xDy³⁺ phosphor firstly increased and then decreased with increasing Dy³⁺ concentration, and reached the maximum at x = 0.03. It was found that concentration quenching occurred as a result of dipole-dipole interaction according to the Dexter's theory. The decay time was also determined for various concentrations of Dy³⁺ in LiSrPO₄.     

A promising red phosphor MgMoO4:Eu for white light emitting diodes

Motivated by the need for new red phosphors for solid-state lighting applications Eu³⁺-doped MgMoO₄ was prepared by solid-state reaction and its excitation and emission spectra were measured at room temperature. In addition, the effects of firing temperature and Eu³⁺ doping concentration on the PL intensities were also investigated. Compared with Y₂O₂S:0.05Eu³⁺, the obtained Mg_0.80MoO₄:Eu³⁺_0.20 phosphor shows a stronger excitation band near 400 nm and intensely red-emission lines at 616 nm correspond to the forced electric dipole ⁵D₀ → ⁷F₂ transitions on Eu³⁺ under 394 nm light excitation. The CIE chromaticity coordinates (x = 0.651, y = 0.348) of Mg_0.80MoO₄:Eu³⁺_0.20 close to the NTSC (National Television Standard Committee) standard values, and therefore may find application on near UV InGaN chip-based white light emitting diodes.     

Solvothermal synthesis of SrMoO4:Ln (Ln = Eu, Tb, Dy) nanoparticles and its photoluminescence properties at room temperature

Rare-earth ions (Eu³⁺, Tb³⁺, Dy³⁺) doped SrMoO₄ nanoparticles were prepared by solvothermal route using oleic acid as surfactant to control the particle shape and size. X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectra (XPS), photoluminescence spectra (PL) and the kinetic decay times were applied to characterize the obtained samples. The XRD patterns reveal that all the doped samples are assigned to the scheelite-type tetragonal structure of SrMoO₄ phase. In addition, the as-synthesized SrMoO₄:Ln (Ln = Eu³⁺, Tb³⁺, Dy³⁺) particles are high purity well crystallized and with the average size of 30-50 nm. The possible formation process of SrMoO₄:Ln (Ln = Eu³⁺, Tb³⁺, Dy³⁺) nanoparticles have been discussed as well. Upon excitation by ultraviolet radiation, the as-synthesized SrMoO₄:Ln (Ln = Eu³⁺, Tb³⁺, Dy³⁺) nanoparticles exhibit the characteristic emission lines of corresponding Eu³⁺, Tb³⁺, Dy³⁺, respectively.     

Luminescent properties of Na3YSi3O9 doped with Eu under UV-VUV excitation

The luminescent properties of Na₃Y_1−xSi₃O₉:xEu³⁺ (0.05 ≦ x ≦ 0.80) powder crystals were investigated in UV-VUV region. The Eu³⁺-O²⁻ charge transfer band (CTB) was observed to be located at around 233 nm and the environmental parameter (h_e) was estimated to be about 0.730. The excitation spectrum monitoring the 613 nm red emission from Eu³⁺ ions reveals the host absorption band (HAB) to be around 145 nm. The calculated Commission Internationale de l’Eclairage (CIE) chromaticity coordinates indicate the emission by 233 nm rather than by 147 nm excitation has the better color purity and the possible mechanisms have been proposed. The Eu³⁺-emission showed high quenching concentration due to the isolated YO₆ octahedra in the host and the small h_e for the Eu³⁺ ions and the optimum concentration was determined to be as high as x = 0.65 and 0.30 with 233 and 147 nm excitation, respectively.     

Morphological investigation of sub-micron FePO4 and LiFePO4 particles for rechargeable lithium batteries

Microstructural variations of amorphous FePO₄ and LiFePO₄ (the latter obtained by chemical lithiation of the former) as a result of the annealing temperature have been studied by Thermogravimetric Analysis (TGA)/Differential Thermal Analysis (DTA), chemical analysis, Brunauer-Emmet-Taylor (BET) and Scanning Electron Microscopy (SEM) techniques. Round-shaped amorphous FePO₄ particles 40-80 nm in size are obtained after heating (at 400 °C) amorphous FePO₄·2H₂O in air (previously prepared by a precipitation route). On further heating at 650 °C, in air, crystalline trigonal FePO₄ of crystallite size <200 nm is formed. Round-shaped amorphous LiFePO₄ particles 40-80 nm in size crystallize by heating at 550 °C in Ar+5%H₂ for 3 h. After thermal treatment, LiFePO₄ particles are interconnected by necks, which resembled a sintering process. The particle size of LiFePO₄ increases with an increase of temperature up to 750 °C, but an abnormal growth is evident at annealing temperatures above 650 °C. DTA analysis showed two exothermic peaks at 547 and 768 °C for FePO₄ due to phase transitions, whereas for LiFePO₄ two exothermic effects at 496 and 567 °C are shown.     

Self-flux synthesis and photoluminescent properties of LiAl5O8

Pure-phase LiAl₅O₈ was selected as an oxide ceramic red phosphor material without dopants (color centers) and was synthesized using a self-flux method. The LiAl₅O₈ was formed by heating a powder mixture consisting of γ-Al₂O₃:Li₂SO₄ = 1:2 (molar ratio) at over 1100 °C for 1 h. Photoluminescence (PL) properties for the synthesized LiAl₅O₈ were investigated. The maximum intensity of the excitation spectrum for the photoluminescent emission of LiAl₅O₈ synthesized was at 274 nm. The peak intensity of the emission spectrum was at a wavelength of 667 nm (red color). The intensity of the peak emission spectrum increased with the heating temperature, i.e., the maximum peak intensity of the red emission spectrum was detected for the LiAl₅O₈ synthesized by heating at 1500 °C for 1 h.     

Low temperature synthesis and characterization of SnTa2O6

Sn(II)Ta₂O₆ is well known as the mineral Thoreaulite, but attempts to prepare it by direct combination of SnO and Ta₂O₅ fail. SnTa₂O₆ has now been synthesized by reacting SnCl₂ with KTaO₃ at 673 K under an inert atmosphere. Although a reported structure determination of SnTa₂O₆ indicated an acentric space group, our second harmonic generation (SHG) studies indicate that SnTa₂O₆ is centrosymmetric as is the case for isostructural SnNb₂O₆.     

Morphology control and luminescence properties of YAG:Eu phosphors prepared by spray pyrolysis

Starting from nitrate aqueous solutions with citric acid and polyethylene glycol (PEG) as additives, Y₃Al₅O₁₂:Eu (YAG:Eu) phosphors were prepared by a two-step spray pyrolysis (SP) method. The obtained YAG:Eu phosphor particles have spherical shape, submicron size and smooth surface. The effects of process conditions of the spray pyrolysis on the crystallinity, morphology and luminescence properties of phosphor particles were investigated. The emission intensity of the phosphors increased with increasing of sintering temperature and solution concentration due to the increase of the crystallinity and particles size, respectively. Adequate amount of PEG was necessary for obtaining spherical particles, and the optimum emission intensity could be obtained when the concentration of PEG was 0.10 g/ml in the precursor solution. Compared with the YAG:Eu phosphor prepared by citrate-gel (CG) method with non-spherical morphology, spherical YAG:Eu phosphor particles showed a higher emission intensity.     

Carbon-nanotube-supported Ag and Cu2O nanoparticles: Dendrimer-mediated synthesis and their broadband optical limiting properties

Multiwalled carbon nanotubes (MWCNTs) were covalently functionalized with fourth-generation poly(amido amine) (PAMAM) dendrimers with a trimesyl core (DT4), and the as-synthesized MWCNT-DT4 was used as the template for in situ growth of Ag and Cu₂O nanoparticles on MWCNTs. Extensive characterizations of the resultant hybrids have been performed using X-ray diffraction, transmission electron microscopy (TEM), high resolution TEM, energy dispersive X-ray spectroscopy, selected area electron diffraction, thermal gravimetric analysis, and X-ray photoelectron spectroscopy. The side-wall of the nanotubes was uniformly coated with the nanoparticles with mean sizes of 7–8 nm. The optical limiting property measurements of the nanoparticle-modified MWCNTs were carried out by the open-aperture z-scan technique. The results demonstrate that the samples suspended in water show broadband OL performance, and their OL behavior is better than that of MWCNT-DT4 in water due to the presence of Ag and Cu₂O nanoparticles.     

Vacuum ultraviolet excited photoluminescence properties of novel Na3Y9O3(BO3)8:Eu phosphor

The novel vacuum ultraviolet (VUV) excited Na₃Y₉O₃(BO₃)₈:Eu³⁺ red phosphor was synthesized and the photoluminescence (PL) properties were investigated. The phosphor showed strong VUV PL intensity, large quenching concentration (40 mol%) and good chromaticity (0.649, 0.351). The Eu³⁺-O²⁻ charge transition (CT) was observed to be at a higher energy (232 nm, 5.35 eV). The host absorption at 127-166 nm was broad and strong when monitoring the Eu³⁺ emission, which indicated that energy transfer from the host-lattice to the Eu³⁺ ions was efficient in Na₃Y₉O₃(BO₃)₈:Eu³⁺. These excellent VUV PL properties were revealed to be correlated with the unique isolated layer-type structure of Na₃Y₉O₃(BO₃)₈ host. The results showed that the Na₃Y₉O₃(BO₃)₈:Eu³⁺ would be a good candidate for VUV-excited red phosphor.