A 183 GHz f/sub T/ and 165 GHz f/sub max/ regrown-emitter DHBT with abrupt InP emitter

Small-area regrown emitter-base junction InP/In-GaAs/InP double heterojunction bipolar transistors (DHBT) using an abrupt InP emitter are presented for the first time. In a device with emitter-base junction area of 0.7 /spl times/ 8 /spl mu/m/sup 2/, a maximum 183 GHz f/sub T/ and 165 GHz f/sub max/ are exhibited. To our knowledge, this is the highest reported bandwidth for a III-V bipolar transistor utilizing emitter regrowth. The emitter current density is 6/spl times/10/sup 5/ A/cm/sup 2/ at V/sub CE,sat/ = 1.5 V. The small-signal current gain h/sub 21/ = 17, while collector breakdown voltage is near 6 V for the 1500-/spl Aring/-thick collector. The emitter structure, created by nonselective molecular beam epitaxy regrowth, combines a small-area emitter-base junction and a larger-area extrinsic emitter contact, and is similar in structure to that of a SiGe HBT. The higher f/sub T/ and f/sub max/ compared to previously reported devices are achieved by simplified regrowth using an InP emitter and by improvements to the regrowth surface preparation process.     

AlGaN/GaN HEMTs on SiC with f/sub T/ of over 120 GHz

AlGaN/GaN high electron mobility transistors (HEMTs) grown on semi-insulating SiC substrates with a 0.12 /spl mu/m gate length have been fabricated. These 0.12-/spl mu/m gate-length devices exhibited maximum drain current density as high as 1.23 A/mm and peak extrinsic transconductance of 314 mS/mm. The threshold voltage was -5.2 V. A unity current gain cutoff frequency (f/sub T/) of 121 GHz and maximum frequency of oscillation (f/sub max/) of 162 GHz were measured on these devices. These f/sub T/ and f/sub max/ values are the highest ever reported values for GaN-based HEMTs.     

Ultra high-speed InP-InGaAs SHBTs with f/sub max/ of 478 GHz

InP-based single heterojunction bipolar transistors (SHBTs) for high-speed circuit applications were developed. Typical common emitter DC current gain (/spl beta/) and BV/sub CEO/ were about 17 and 10 V, respectively. Maximum extrapolated f/sub max/ of 478 GHz with f/sub T/ of 154 GHz was achieved for 0.5 /spl times/ 10 /spl mu/m/sup 2/ emitter size devices at 300 kA/cm/sup 2/ collector current density and 1.5 V collector bias. This is the highest f/sub max/ ever reported for any nontransferred substrate HBTs, as far as the authors know. This paper highlights the optimized conventional process, and the authors have great hopes for the process that offers inherent advantages for the direct implementation to high-speed electronic circuit fabrication.     

Over 300 GHz f/sub T/ and f/sub max/ InP/InGaAs double heterojunction bipolar transistors with a thin pseudomorphic base

Describes 150-nm-thick collector InP-based double heterojunction bipolar transistors with two types of thin pseudomorphic bases for achieving high f/sub T/ and f/sub max/. The collector current blocking is suppressed by the compositionally step-graded collector structure even at J/sub C/ of over 1000 kA/cm/sup 2/ with practical breakdown characteristics. An HBT with a 20-nm-thick base achieves a record f/sub T/ of 351 GHz at high J/sub C/ of 667 kA/cm/sup 2/, and a 30-nm-base HBT achieves a high value of 329 GHz for both f/sub T/ and f/sub max/. An equivalent circuit analysis suggests that the extremely small carrier-transit-delay contributes to the ultrahigh f/sub T/.     

InGaAs/InP DHBTs with 120-nm collector having simultaneously high f/sub /spl tau//, f/sub max//spl ges/450 GHz

InP/In/sub 0.53/Ga/sub 0.47/As/InP double heterojunction bipolar transistors (DHBT) have been designed for increased bandwidth digital and analog circuits, and fabricated using a conventional mesa structure. These devices exhibit a maximum 450 GHz f/sub /spl tau// and 490 GHz f/sub max/, which is the highest simultaneous f/sub /spl tau// and f/sub max/ for any HBT. The devices have been scaled vertically for reduced electron collector transit time and aggressively scaled laterally to minimize the base-collector capacitance associated with thinner collectors. The dc current gain /spl beta/ is /spl ap/ 40 and V/sub BR,CEO/=3.9 V. The devices operate up to 25 mW//spl mu/m/sup 2/ dissipation (failing at J/sub e/=10 mA//spl mu/m/sup 2/, V/sub ce/=2.5 V, /spl Delta/T/sub failure/=301 K) and there is no evidence of current blocking up to J/sub e//spl ges/12 mA//spl mu/m/sup 2/ at V/sub ce/=2.0 V from the base-collector grade. The devices reported here employ a 30-nm highly doped InGaAs base, and a 120-nm collector containing an InGaAs/InAlAs superlattice grade at the base-collector junction.     

Self-aligned SiGe NPN transistors with 285 GHz f/sub MAX/ and 207 GHz f/sub T/ in a manufacturable technology

This paper reports on SiGe NPN HBTs with unity gain cutoff frequency (f_T) of 207 GHz and an f_MAX extrapolated from Mason's unilateral gain of 285 GHz. f_MAX extrapolated from maximum available gain is 194 GHz. Transistors sized 0.12×2.5 μm² have these characteristics at a linear current of 1.0 mA/μm (8.3 mA/μm²). Smaller transistors (0.12×0.5 μm²) have an f_T of 180 GHz at 800 μA current. The devices have a pinched base sheet resistance of 2.5 kΩ/sq. and an open-base breakdown voltage BV_CEO of 1.7 V. The improved performance is a result of a new self-aligned device structure that minimizes parasitic resistance and capacitance without affecting f_T at small lateral dimensions     

High-speed Schottky-barrier pMOSFET with f/sub T/=280 GHz

High-speed results on sub-30-nm gate length pMOSFETs with platinum silicide Schottky-barrier source and drain are reported. With inherently low series resistance and high drive current, these deeply scaled transistors are promising for high-speed analog applications. The fabrication process simplicity is compelling with no implants required. A sub-30-nm gate length pMOSFET exhibited a cutoff frequency of 280 GHz, which is the highest reported to date for a silicon MOS transistor. Off-state leakage current can be easily controlled by augmenting the Schottky barrier height with an optional blanket As implant. Using this approach, good digital performance was also demonstrated.     

A submicrometer 252 GHz f/sub T/ and 283 GHz f/sub MAX/ InP DHBT with reduced C/sub BC/ using selectively implanted buried subcollector (SIBS)

The selectively implanted buried subcollector (SIBS) is a method to decouple the intrinsic and extrinsic C/sub BC/ of InP-based double-heterojunction bipolar transistors (DHBTs). Similar to the selectively implanted collector (SIC) used in Si-based bipolar junction transistors (BJTs) and HBTs, ion implantation is used to create a N+ region in the collector directly under the emitter. By moving the subcollector boundary closer to the BC junction, SIBS allows the intrinsic collector to be thin, reducing /spl tau//sub C/, while simultaneously allowing the extrinsic collector to be thick, reducing C/sub BC/. For a 0.35 /spl times/ 6 /spl mu/m/sup 2/ emitter InP-based DHBT with a SIBS, 6 fF total C/sub BC/ and >6 V BV/sub CBO/ were obtained with a 110-nm intrinsic collector thickness. A maximum f/sub T/ of 252 GHz and f/sub MAX/ of 283 GHz were obtained at a V/sub CE/ of 1.6 V and I/sub C/ of 7.52 mA. Despite ion implantation and materials regrowth during device fabrication, a base and collector current ideality factor of /spl sim/2.0 and /spl sim/1.4, respectively, at an I/sub C/ of 100 /spl mu/A, and a peak dc /spl beta/ of 36 were measured.     

Self-aligned InP DHBT with f/sub /spl tau// and f/sub max/ over 300 GHz in a new manufacturable technology

We report self-aligned indium-phosphide double-heterojunction bipolar transistor devices in a new manufacturable technology with both cutoff frequency (f/sub /spl tau//) and maximum oscillation frequency (f/sub max/) over 300 GHz and open-base breakdown voltage (BV/sub ceo/) over 4 V. Logic circuits fabricated using these devices in a production integrated-circuit process achieved a current-mode logic ring-oscillator gate delay of 1.95 ps and an emitter-coupled logic static-divider frequency of 152 GHz, both of which closely matched model-based circuit simulations.     

Laterally scaled Si-Si/sub 0.7/Ge/sub 0.3/ n-MODFETs with f/sub max/>200 GHz and low operating bias

We report on the dc and RF characterization of laterally scaled, Si-SiGe n-MODFETs. Devices with gate length, L/sub g/, of 80 nm had f/sub T/=79 GHz and f/sub max/=212 GHz, while devices with L/sub g/=70 nm had f/sub T/ as high as 92 GHz. The MODFETs displayed enhanced f/sub T/ at reduced drain-to-source voltage, V/sub ds/, compared to Si MOSFETs with similar f/sub T/ at high V/sub ds/.     

InGaAs-InP metamorphic DHBTs grown on GaAs with lattice-matched device performance and f/sub /spl tau//, f/sub max/>268 GHz

InP-In/sub 0.53/Ga/sub 0.47/As-InP double heterojunction bipolar transistors (DHBTs) were grown on a GaAs substrate using a metamorphic buffer layer and then fabricated. The metamorphic buffer layer is InP - employed because of its high thermal conductivity to minimize device heating. An f/sub /spl tau// and f/sub max/ of 268 and 339 GHz were measured, respectively - both records for metamorphic DHBTs. A 70-nm SiO/sub 2/ dielectric sidewall was deposited on the emitter contact to permit a longer InP emitter wet etch for increased device yield and reduced base leakage current. The dc current gain /spl beta/ is /spl ap/35 and V/sub BR,CEO/=5.7 V. The collector leakage current I/sub cbo/ is 90 pA at V/sub cb/=0.3 V. These values of f/sub /spl tau//, f/sub max/, I/sub cbo/, and /spl beta/ are consistent with InP based DHBTs of the same layer structure grown on a lattice-matched InP substrate.     

AlGaN/GaN MIS-HFETs with f/sub T/ of 163 GHz using cat-CVD SiN gate-insulating and passivation Layers

Al/sub 0.4/Ga/sub 0.6/N/GaN heterostructure field-effect transistors (HFETs) with an AlGaN barrier thickness of 8 nm and a gate length (L/sub G/) of 0.06-0.2 /spl mu/m were fabricated on a sapphire substrate. We employed two novel techniques, which were thin, high-Al-composition AlGaN barrier layers and SiN gate-insulating, passivation layers formed by catalytic chemical vapor deposition, to enhance high-frequency device characteristics by suppressing the short channel effect. The HFETs with L/sub G/=0.06-0.2 /spl mu/m had a maximum drain current density of 1.17-1.24 A/mm at a gate bias of +1.0 V and a peak extrinsic transconductance of 305-417 mS/mm. The current-gain cutoff frequency (f/sub T/) was 163 GHz, which is the highest value to have been reported for GaN HFETs. The maximum oscillation frequency (f/sub max/) was also high, and its value derived from the maximum stable gain or unilateral gain was 192 or 163 GHz, respectively.     

Submicron InP-InGaAs single heterojunction bipolar transistors with f/sub T/ of 377 GHz

Submicron InP-InGaAs-based single heterojunction bipolar transistors (SHBTs) are fabricated to achieve record-breaking speed performance using an aggressively scaled epitaxial structure coupled with a submicron emitter process. SHBTs with dimensions of 0.35 /spl times/16 /spl mu/m have demonstrated a maximum current gain cutoff frequency f/sub T/ of 377 GHz with a simultaneous maximum power gain cutoff frequency f/sub MAX/ of 230 GHz at the current density Jc of 650 kA/cm/sup 2/. Typical BV/sub CEO/ values exceed 3.7 V.     

Graded base type-II InP/GaAsSb DHBT with f/sub T/=475 GHz

The first demonstration of a type-II InP/GaAsSb double heterojunction bipolar transistor (DHBT) with a compositionally graded InGaAsSb to GaAsSb base layer is presented. A device with a 0.4/spl times/6 /spl mu/m/sup 2/ emitter dimensions achieves peak f/sub T/ of 475 GHz (f/sub MAX/=265 GHz) with current density at peak f/sub T/ exceeding 12 mA//spl mu/m/sup 2/. The structure consists of a 25-nm InGaAsSb/GaAsSb graded base layer and 65-nm InP collector grown by MBE with breakdown voltage /spl sim/4 V which demonstrates the vertical scaling versus breakdown advantage over type-I DHBTs.     

InGaAs-InP mesa DHBTs with simultaneously high f/sub /spl tau// and f/sub max/ and low C/sub cb//I/sub c/ ratio

We report an InP-InGaAs-InP double heterojunction bipolar transistor (DHBT), fabricated using a conventional triple mesa structure, exhibiting a 370-GHz f/sub /spl tau// and 459-GHz f/sub max/, which is to our knowledge the highest f/sub /spl tau// reported for a mesa InP DHBT-as well as the highest simultaneous f/sub /spl tau// and f/sub max/ for any mesa HBT. The collector semiconductor was undercut to reduce the base-collector capacitance, producing a C/sub cb//I/sub c/ ratio of 0.28 ps/V at V/sub cb/=0.5 V. The V/sub BR,CEO/ is 5.6 V and the devices fail thermally only at >18 mW//spl mu/m/sup 2/, allowing dc bias from J/sub e/=4.8 mA//spl mu/m/sup 2/ at V/sub ce/=3.9 V to J/sub e/=12.5 mA//spl mu/m/sup 2/ at V/sub ce/=1.5 V. The device employs a 30 nm carbon-doped InGaAs base with graded base doping, and an InGaAs-InAlAs superlattice grade in the base-collector junction that contributes to a total depleted collector thickness of 150 nm.     

Pseudomorphic In/sub 0.52/Al/sub 0.48/As/In/sub 0.7/Ga/sub 0.3/As HEMTs with an ultrahigh f/sub T/ of 562 GHz

We fabricated decananometer-gate pseudomorphic In/sub 0.52/Al/sub 0.48/As/In/sub 0.7/Ga/sub 0.3/As high-electron mobility transistors (HEMTs) with a very short gate-channel distance. We obtained a cutoff frequency f/sub T/ of 562 GHz for a 25-nm-gate HEMT. This f/sub T/ is the highest value ever reported for any transistor. The ultrahigh f/sub T/ of our HEMT can be explained by an enhanced electron velocity under the gate, which was a result of reducing the gate-channel distance.     

Dual-gate AlGaN/GaN modulation-doped field-effect transistors with cut-off frequencies f/sub T/>60 GHz

We demonstrate dual-gate AlGaN/GaN modulation-doped field-effect transistors (MODFETs) with gate-lengths of 0.16 /spl mu/m and 0.35 /spl mu/m for the first and second gates, respectively. The dual-gate device exhibits a current-gain cut-off frequency f/sub T/>60 GHz, and can simultaneously achieve a high breakdown voltage of >+100 V. In comparison to single-gate devices with the same gate length 0.16 /spl mu/m, dual-gate FETs can significantly increase breakdown voltages, largely increasing the maximum allowable drain bias for high power application. The continuous wave (CW) output power is in excess of 3.5 W/mm at 8.2 GHz. The corresponding large-signal gain is 12 dB and the power added efficiency is 45%. The dual-gate device with different gate lengths shows the capability of providing simultaneous high cut-off frequencies, and high breakdown voltages for broadband power amplifiers.     

50-nm T-gate metamorphic GaAs HEMTs with f/sub T/ of 440 GHz and noise figure of 0.7 dB at 26 GHz

GaAs-based transistors with the highest f/sub T/ and lowest noise figure reported to date are presented in this letter. A 50-nm T-gate In/sub 0.52/Al/sub 0.48/As/In/sub 0.53/Ga/sub 0.47/As metamorphic high-electron mobility transistors (mHEMTs) on a GaAs substrate show f/sub T/ of 440 GHz, f/sub max/ of 400 GHz, a minimum noise figure of 0.7 dB and an associated gain of 13 dB at 26 GHz, the latter at a drain current of 185 mA/mm and g/sub m/ of 950 mS/mm. In addition, a noise figure of below 1.2 dB with 10.5 dB or higher associated gain at 26 GHz was demonstrated for drain currents in the range 40 to 470 mA/mm at a drain bias of 0.8 V. These devices are ideal for low noise and medium power applications at millimeter-wave frequencies.     

40-Gb/s circuits built from a 120-GHz f/sub T/ SiGe technology

Product designs for 40-Gb/s applications fabricated from SiGe BiCMOS technologies are now becoming available. In this paper we first briefly discuss heterojunction bipolar transistor (HBT) device operation at high speed, demonstrating that perceived concerns regarding lower BV/sub CEO/ and higher current densities required to operate silicon HBTs at such high speeds do not in actuality limit design or performance. The high-speed portions of the 40-Gb/s system are then addressed individually. We demonstrate the digital capability through a 4: 1 multiplexer and a 1 : 4 demultiplexer running over 50 Gb/s error free at a -3.3-V power supply. We also demonstrate a range of analog elements, including a lumped limiting amplifier which operates with a 35-GHz bandwidth, a transimpedance amplifier with 220-/spl Omega/ gain and 49.1-GHz bandwidth, a 21.5-GHz voltage-controlled oscillator with over -100-dBc/Hz phase noise at 1-MHz offset, and a modulator driver which runs a voltage swing twice the BV/sub CEO/ of the high-speed SiGe HBT. These parts demonstrate substantial results toward product offerings, on each of the critical high-speed elements of the 40-Gb/s system.     

InGaAs-InP DHBTs for increased digital IC bandwidth having a 391-GHz f/sub /spl tau// and 505-GHz f/sub max/

InP-In/sub 0.53/Ga/sub 0.47/As-InP double heterojunction bipolar transistors (DHBT) have been designed for use in high bandwidth digital and analog circuits, and fabricated using a conventional mesa structure. These devices exhibit a maximum 391-GHz f/sub /spl tau// and 505-GHz f/sub max/, which is the highest f/sub /spl tau// reported for an InP DHBT-as well as the highest simultaneous f/sub /spl tau// and f/sub max/ for any mesa HBT. The devices have been aggressively scaled laterally for reduced base-collector capacitance C/sub cb/. In addition, the base sheet resistance /spl rho//sub s/ along with the base and emitter contact resistivities /spl rho//sub c/ have been lowered. The dc current gain /spl beta/ is /spl ap/36 and V/sub BR,CEO/=5.1 V. The devices reported here employ a 30-nm highly doped InGaAs base, and a 150-nm collector containing an InGaAs-InAlAs superlattice grade at the base-collector junction. From this device design we also report a 142-GHz static frequency divider (a digital figure of merit for a device technology) fabricated on the same wafer. The divider operation is fully static, operating from f/sub clk/=3 to 142.0 GHz while dissipating /spl ap/800 mW of power in the circuit core. The circuit employs single-buffered emitter coupled logic (ECL) and inductive peaking. A microstrip wiring environment is employed for high interconnect density, and to minimize loss and impedance mismatch at frequencies >100 GHz.