Synthesis and characterization of needle-like BaAleO4：Eu,Dy phosphor via hydrothermal-homogeneous precipitation method

A needle-like Eu2+ and Dy3+ co-doped BaAl2O4 long-lasting phosphor was synthesized via a hydrothermal-homogeneous precipitation method assisted by cetyl trimethyl ammonium bromide(CTAB) as a template.The crystal structure,morphology and optical properties of the composites were characterized.XRD results showed that the single-phase BaAl2O4 was formed at 900 ℃ in an active carbon atmosphere,which was much lower than that prepared by traditional solid-state reaction method.Scanning electron microscopy(SEM) and transmission electron microscopy(TEM) observation revealed that the precursor had well-dispersed distribution and showed needle-like morphology with the average diameter of about 100 nm and the length up to 1 μm.The final product,BaAl2O4:Eu2+,Dy3+ phosphor,inherited the needle-like shape from precursor via adding the surfactant CTAB.After irradiation by ultraviolet radiation with 355 nm for 5 min,the phosphors emitted bluish green color long-lasting phosphorescence corresponding to the typical emission of Eu2+ ion.Both the photoluminescence spectra and luminance decay revealed that the phosphor had efficient luminescent and long-lasting properties.     

Synthesis and luminescence properties of BaWO4：Pr^3＋ microcrystal

BaWO4:Pr3+ (hereafter BWO:Pr) microcrystals were prepared via a hydrothermal route, and characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), photoluminescence excitation and emission spectra. The as-prepared products with different morphologies of egg-shape rod, olive-like, and quasi-sphere were obtained by the addition of the surfactants and chelating agents. The emis-sion spectra of BWO:Pr microcrystals showed the strong red emission (642 nm) assigned to the Pr3+ ions of 3P0→3F2 transition with blue ex-citation (484.6 nm, 3H4→3P0).     

LiZnPO4：Tb^3＋,Ce^3＋ green phosphors with high efficiency

Tb3+ and Ce3+ co-activated LiZnPO4 phosphors with high luminescence efficiency were synthesized by a high temperature solid-state reaction at 1000 oC for 3 h. The XRD patterns, photoluminescence spectra and SEM were recorded and the effects of Tb3+ and Ce3+ concentration, sintering condition on the luminescent properties of as-synthesized phosphors were investigated. The emission spectra under ultraviolet (200-300 nm) radiation showed a dominant peak at 543 nm attributed to the 5D4→7F5 transition of Tb3+, which was greatly en-hanced by the co-doping of Ce3+, indicating that there occurred an efficient non-radiative energy transfer from Ce3+ to Tb3+. The optimal dop-ing concentrations of Tb3+ and Ce3+ were determined to be 9% and 10%, respectively.     

Influence of concentration and sintering temperature on luminescence properties of Eu^3＋：SnO2 nanocrystallites

The nanopowders of SnO2 doped with different Eu3+ concentrations were synthesized using the modified Pechini method. The Eu3+ concentrations were high above solubility limit. The average size of crystallites was controlled by the sintering temperatures. The structure and the morphology of obtained powders were examined using the XRD (X-ray diffraction) and TEM (transmission electron microscopy) analyses. The Eu2Sn2O7 phase separation was observed at relatively high concentration of Eu3+ ions. The ZnS:Ag micropowders were mixed with the Eu3+:SnO2 powders and their normalized emission was used to measure a relative efficiency of Eu3+:SnO2. The photoluminescence spectra of mixed powders were measured in function of Eu3+ concentration and average size of nanocrystallites. The reference peak method was used for comparison of intensities of the samples and selection of optimal one. The influence of the average grain size and Eu3+ concen-tration on the phosphor’s efficiency was discussed. The presented results confirmed the rightness of synthesis of the Eu3+:SnO2 in form of nanocrystalites with relatively high Eu3+ concentration.     

Synthesis of CaWO4：Eu3＋ phosphor powders via ethylene glycol route and its optical properties

Eu3+ doped CaWO4 with tetragonal system were prepared at comparatively low temperature (125 ?C) in ethylene glycol medium. The phosphor was further investigated by X-ray diffractometer (XRD), photoluminescence spectrophotometer (PL), Fourier transform infra red (FT-IR) spectroscopy and transmission electron microscopy (TEM). XRD analysis indicated a decrease in the unit cell volume of CaWO4 with increasing Eu3+ ion concentration. It indicated the homogeneous substitution of Ca2+ ions in CaWO4 by the Eu3+ ions. TEM images showed that the particle size ranged from 20 to 200 nm and it could extend the application of the nanoparticles. The photoluminescence study showed that the intensity of electric dipole transition (5D0→7F2) at 614 nm dominated over the magnetic dipole transition (5D0→7F1) at 592 nm. The optimum concentration of Eu3+ for the highest luminescence was found to be 20 at.%. The as prepared samples were found to be dis-persible in water and methanol.     

Preparation and upconversion luminescence of monodisperse Gd2O3：Ho^3＋,Yb^3＋ nanocrystals

Gd2O3:Ho3+,Yb3+ nanocrystals were synthesized via solvothermal method.X-ray diffraction(XRD),transmission electron microscopy(TEM),absorption and upconversion spectra were employed to characterize the synthesized nanocrystals.The results of XRD and TEM showed that obtained Gd2O3:Ho3+,Yb3+ nanocrystals were cubic in crystal structure and uniform spherical in morphology.The average crystallite size was calculated to be 7.5 nm.Green and red up-conversion emissions corresponding to(5F4,5S2)→5I8 and 5F5 → 5I8 transition were observed upon 980 nm excitation at room temperature.The results indicated that both green and red luminescence were based on the two-photon processes.Laser power and doping concentration dependence of the upconverted emissions were studied to understand the upconversion mechanisms.Excited state absorption and energy-transfer processes were discussed as the possible mechanisms for the visible emissions.     

Synthesis and luminescence properties of a novel phosphor Ca2–x/2Si1–xPxO4:Eu2+for near UV-excited white-light-emitting diodes

A novel green-emitting phosphor,Eu2+-doped Ca2-x/2 Si1-x Px O4(0.25≤x≤0.30),was prepared through a conventional solidstate reaction.X-ray diffraction(XRD),photoluminescence(PL) and decay studies were employed to characterize the sample,which was assigned to P63mc space group in the hexagonal system.The effect of P-doping on the α-Ca2 SiO4 was studied and P2 O5 broken down by the raw material of(NH4)2 HPO4 played an important role in stabilizing α-Ca2 SiO4 which can only be stable at high temperature.The XRD patterns of the Ca2-x/2 Si1-x Px O4 host were found pure and optimized when the mole fraction of P2 O5 was 14.5%.The diffuse reflectance spectra of the Ca1.855 Si0.71 P0.29 O4 and Ca1.845 Si0.71 P0.29 O4 :0.01Eu2+covered the spectral region of 230-400 nm,implying that the phosphor was suitable for UV or near-UV LED excitation.The phosphor could be effectively excited in the near UV region with the maximum at 372 nm.The emission spectrum of the Ca1.845 Si0.71 P0.29 O4 :0.01Eu2+phosphor showed an asymmetrical single intensive band centered at 513 nm,which corresponded to the 4f65d1→4f7transition of Eu2+.Eu2+ions might occupy two types of Ca2+sites in the Ca1.855 Si0.71 P0.29 O4 lattice and form two corresponding emission centers,which led to the asymmetrical emission of Eu2+in Ca1.855 Si0.71 P0.29 O4.The effects of Eu2+-doped concentration in Ca1.855-x Si0.71 P0.29 O4 :xEu2+on the PL were also discussed,the optimum doping concentration of Eu2+was 1 mol.% and the critical distance of the energy transfer was also calculated by the concentration-quenching method.The non-radiative energy transfer between Eu2+seemed to be caused by the multipole-multipole interaction.The fluorescence lifetime of Eu2+was found to be 0.55711 μs.The results suggested that these phosphors might be promising candidates used for near UV light excited white LEDs.     

Luminescent properties of red phosphors K2Ba（MoO4）2：Eu3＋ for white light emitting diodes

K2Ba(MoO4)2:Eu3+ phosphors were synthesized by solid-state reaction. The emission and excitation spectra of K2 Ba(MoO4)2:Eu3+ phosphors exhibited that the phosphors could be effectively excited by near ultraviolet (394 nm) and blue (465 nm) light, and emitted red light at 616 nm. The influence of Eu3+concentration, sintering temperature and charge compensators (K+, Na+ or Li+ ) on the emission intensity were investigated. The results indicated that concentration quenching of Eu3+ was not observed within 30mol.% Eu 3+, 600 oC was a suitable sintering temperature for preparation of K2 Ba(MoO4)2:Eu3+phosphors, and K+ ions gave the best improvement to enhance the emission intensity. The CIE chromaticity coordinates of K2 Ba(MoO4)2:0.05Eu3+phosphor were calculated to be (0.68, 0.32), and color purity was 97.4%.     

Preparation and luminescence properties of Ce3＋/Dy3＋-codoped fluorosilicate glass ceramics

The Ce3+and Dy3+ co-doped fluorosilicate glass and glass ceramics containing SrF2 or CeF3 nanocrystals were prepared under re-ducing atmosphere. The precipitated nano-crystalline phase shifted from cubic SrF2 to hexagonal CeF3 gradually with the heat treatment tem-perature increasing from 620 to 680 °C. The glass and glass ceramics emitted white light, deriving from a combination of the Ce3+ blue and the Dy3+ yellow light. The CIE coordinates could be tuned by adjusting the ratio of Ce3+/Dy3+ concentration. The luminescence could be en-hanced significantly by annealing the samples at the temperatures lower than 640 °C.     

Synthesis and luminescence properties of a novel red Sr3Bi（PO4）3：Sm^3＋ phosphor

A series of Sr3Bi1-x(PO4)3: xSm3+phosphors were prepared by solid state method at 1250 °C for 4 h. X-ray diffraction (XRD) indi-cated that the sample was of a pure phase of Sr3Bi(PO4)3. The main excitation peaks were located at 343 (6H5/2→4H9/2), 360 (6H5/2→4D3/2), 373 (6H5/2→6P7/2), 400 (6H5/2→4F7/2), 414 (6H5/2→6P5/2) and 467 nm (6H5/2→4I13/2). The main emission were located at 563 (4G5/2→6H5/2), 599 (4G5/2→6H7/2), 646 (4G5/2→6H9/2) and 708 nm (4G5/2→6H11/2). The intensest emission was excited by 400 nm. We studied the effect of differ-ent doping concentrations of Sm3+ activator on the luminescence properties and found that the luminescent intensity first increased with Sm3+ concentration increasing, and then decreased. The luminescent intensity had the best value when x=0.04. The chromaticity coordinates of the sample Sr3Bi0.96(PO4)3:0.04Sm3+ were (x=0.57, y=0.36), and the lifetime was 2.12 ms.     

Combustion synthesis and luminescence properties of blue NaBaPO4:Eu2+ phosphor

The blue-emitting phosphor NaBaPO4:Eu2+ was prepared by the combustion method. The phase structure and microstructure of the as-prepared samples were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM), respectively. Under the excita-tion wavelength of 360 nm, the emission spectrum exhibited only one blue band centering at 435 nm, which was ascribed to the 4f65d1→4f7 transition on Eu2+ ions. Compared with the phosphor obtained by solid-state reaction method, the relative emission intensity of sample ob-tained by combustion method increased slightly. The decay times and the temperature dependence luminescence intensities (25-300 oC) were discussed in order to further investigate the potential applications. Furthermore, Eu2+-doped NaBaPO4 phosphor showed higher thermally sta-ble luminescence comparable to commercially available Y3Al5O12:Ce3+ (YAG:Ce3+) phosphor. All the investigated suggestions that Na-BaPO4:Eu2+ is a good phosphor candidate applied in white light emitting diode.     

Luminescent Properties of Green Phosphor Ca8Mg（SiO4 ）4 Cl2：EU^2＋ , DY^3＋ for LED Applications

The new phosphor calcium magnesium chlorosilicate, codoped with Eu^2＋ and Dy^3＋, was synthesized with the help of the high temperature solid state reaction in reducing atmosphere. The excitation and emission spectra were very similar to that of Ca8Mg（SiO4）4Cl2 ：Eu^2＋, and the Dy^3＋ concentration influenced the emission intensity of this phosphor. The intensity of Eu^2＋ and Dy^3＋ codoped CMSC was stronger than that of Eu^2＋ singly doped CMSC. The emission spectrum of the Dy^3＋ ion overlapped the absorption band of the Eu^2＋ ion, indicating that an energy transfer from Dy^3＋ to Eu^2＋ took place in CMSC：Eu^2＋, Dy^3＋ phosphor. The mechanism of the energy transfer from Dy^3＋ tO Eu^2＋, in this phosphor, might be resonant energy transfer.     

Properties of red-emitting phosphors Sr2MgSi2O7:Eu3+ prepared by gel-combustion method assisted by microwave

Novel red-emitting phosphors Sr2MgSi2O7:Eu3+ were prepared by gel-combustion method assisted by microwave. The phase struc-ture and luminescent properties of as-synthesized phosphors were investigated by XRD and fluorescence spectrophotometer, respectively. The results showed that the as-synthesized sample was Sr2MgSi2O7 with tetragonal crystal structure. The excitation spectrum of Sr2MgSi2O7:Eu3+ was composed of two major parts: one was the broad band between 200 and 350 nm, which belonged to the charge transfer of Eu3+-O2-; the other consisted of a series of sharp lines between 350 and 450 nm, ascribed to the f-f transition of Eu3+. The emission spec-trum consisted of two emission peaks at 593 and 616 nm, which was attributed to 5D0→7F1 and 5D0→7F2 of Eu3+, respectively. The concen-tration of Eu3+ (x) had great effect on the emission intensity of Sr2-xMgSi2O7:Eu3+x. When x varied in the range of 0.04-0.18, the intensity of emission peaks at 593 and 616 nm increased gradually with the concentration of Eu3+ increasing. It was interesting that no concentration quenching occurred. Moreover, the luminescent intensity could be greatly enhanced with incorporation of charge compensator Li+ ions.     

Broadband downconversion in YVO4：Tm3＋,Yb3＋ phosphors

An efficient near-infrared (NIR) downconversion (DC) by converting broadband ultraviolet (UV) into NIR was demonstrated in YVO4:Tm3+,Yb3+ phosphors. The phosphors were extensively characterized using various methods such as X-ray diffraction, photoluminescence excitation, photoluminescence spectra and decay lifetime to provide supporting evidence for DC process. Upon UV light varying from 260 to 350 nm or blue light (473 nm) excitation, an intense NIR emission of Yb3+ corresponding to transition of 2F5/2→2F7/2 peaking at 985 nm was generated. The visible emission, the NIR mission and the decay lifetime of the phosphors of various Yb3+ concentrations were investigated. Experimental results showed that the energy transfer from vanadate group to Yb3+ via Tm3+ was very efficient. Application of the broadband DC YVO4:Tm3+,Yb3+ phosphors might greatly enhance response of siliconbased solar cells.     

Preparation of Non-Grinding Long Afterglow SrAl2O4 ：Eu^2＋ , Dy^3＋ Material by Microwave Combustion Method

The non-grinding long afterglow material SrAl2O4：Eu^2＋ , Dy^3＋ was prepared by combustion method in home mierowave oven direetly, after dispersant, frother, eomburent, and mineralizer were added into the reacting system. XRD analysis showed that the powders were nearly pure SrAl2O4 phase with few other phases, and the size of the grain was 41.1 nm. Fluoreseenee speetrum results indieated that there were 2 exeitation peaks loeated at 345 and 400 nm, and the emission peak loeated at 516 nm, afterglow lasted up to 30 min or more. The mierowave eombustion method has advantages of less time, low temperature and no grinding process, and the material made by the method has good luminescent property.     

Effects of crystal field on photoluminescence properties of Ca2Al2SiO7:Eu2+ phosphors

A series of single-phased Ca₂Al₂SiO₇:Eu²⁺ phosphors were synthesized by the solid-state reaction. Their structure and photolumi-nescence properties were investigated by the X-ray powder diffraction （XRD） and excitation and emission spectra in detail. The emission spectra of Ca₂Al₂SiO₇:Eu²⁺ phosphors consisted of blue and green band located at419 and542 nm, respectively. The relative intensities of the blue and green emission changed with Eu²⁺ concentration and were sensitive to the excitation wavelength. The unique photoluminescence property originated from the 4f⁷→4f⁶5d transition of Eu²+ at different energy levels, on which the effect of the crystal field strength was con-sidered to be tailed by adjusting the host composition.