In vitro evaluation of tissue adhesives composed of hydrophobically modified gelatins and disuccinimidyl tartrate

The effect of the hydrophobic group content in gelatin on the bonding strength of novel tissue–penetrating tissue adhesives was evaluated. The hydrophobic groups introduced into gelatin were the saturated hexanoyl, palmitoyl, and stearoyl groups, and the unsaturated oleoyl group. A collagen casing was employed as an adherend to model soft tissue for the in vitro determination of bonding strength of tissue adhesives composed of various hydrophobically modified gelatins and disuccinimidyl tartrate. The adhesive composed of stearoyl-modified gelatin (7.4% stearoyl; 10Ste) and disuccinimidyl tartrate showed the highest bonding strength. The bonding strength of the adhesives decreased as the degree of substitution of the hydrophobic groups increased. Cell culture experiments demonstrated that fluorescein isothiocyanate-labeled 10Ste was integrated onto the surface of smooth muscle cells and showed no cytotoxicity. These results suggest that 10Ste interacted with the hydrophobic domains of collagen casings, such as hydrophobic amino acid residues and cell membranes. Therefore, 10Ste–disuccinimidyl tartrate is a promising adhesive for use in aortic dissection.     

Effectiveness and biocompatibility of a novel biological adhesive application for repair of meniscal tear on the avascular zone

Abstract

We have investigated the effectiveness and safety of a newly developed biological adhesive for repair of meniscal tear. The adhesive was composed of disuccinimidyl tartrate (DST) as a crosslinker and human serum albumin (HSA) as a hardener. To determine adequate concentration, bonding strength was measured using a tensiometer 5 min after applying the adhesive on the avascular zone tear of porcine meniscus; it was compared with the strengths of commercially available cyanoacrylate-based and fibrin-based adhesives. In vivo examination was performed using Japanese white rabbits, creating longitudinal tears on the avascular zone of meniscus and applying DST–HSA adhesive. Three months after operation the rabbits were sacrificed and tension test and histological evaluation were performed. Bonding strength was measured in three porcine meniscus groups: (i) only suturing, (ii) suturing after applying the adhesive on surface and (iii) suturing using an adhesive-soaked suture. The optimum concentrations were 0.1 mmol of DST and 42 w/v% of HAS. Bonding strength was greatest with cyanoacrylate-based adhesive, followed by DST–HSA adhesive, and fibrin-based adhesive. No inflammation was observed in the synovium or surrounding tissues 3 months after using the DST–HSA adhesive. Bonding strength was greatest with DST–HSA adhesive-soaked suturing group (77 ± 6 N), followed by suturing only group (61 ± 5 N) and surface adhesive application group (60 ± 8 N). The newly developed DST-HSA adhesive is considered safe and may be effective in enforcement of bonding of avascular zone tear of the meniscus.     

Effectiveness and biocompatibility of a novel biological adhesive application for repair of meniscal tear on the avascular zone

We have investigated the effectiveness and safety of a newly developed biological adhesive for repair of meniscal tear. The adhesive was composed of disuccinimidyl tartrate (DST) as a crosslinker and human serum albumin (HSA) as a hardener. To determine adequate concentration, bonding strength was measured using a tensiometer 5 min after applying the adhesive on the avascular zone tear of porcine meniscus; it was compared with the strengths of commercially available cyanoacrylate-based and fibrin-based adhesives. In vivo examination was performed using Japanese white rabbits, creating longitudinal tears on the avascular zone of meniscus and applying DST–HSA adhesive. Three months after operation the rabbits were sacrificed and tension test and histological evaluation were performed. Bonding strength was measured in three porcine meniscus groups: (i) only suturing, (ii) suturing after applying the adhesive on surface and (iii) suturing using an adhesive-soaked suture. The optimum concentrations were 0.1 mmol of DST and 42 w/v% of HAS. Bonding strength was greatest with cyanoacrylate-based adhesive, followed by DST–HSA adhesive, and fibrin-based adhesive. No inflammation was observed in the synovium or surrounding tissues 3 months after using the DST–HSA adhesive. Bonding strength was greatest with DST–HSA adhesive-soaked suturing group (77 ± 6 N), followed by suturing only group (61 ± 5 N) and surface adhesive application group (60 ± 8 N). The newly developed DST-HSA adhesive is considered safe and may be effective in enforcement of bonding of avascular zone tear of the meniscus.     

PLLA–collagen and PLLA–gelatin hybrid scaffolds with funnel-like porous structure for skin tissue engineering

Abstract

In skin tissue engineering, a three-dimensional porous scaffold is necessary to support cell adhesion and proliferation and to guide cells moving into the repair area in the wound healing process. Structurally, the porous scaffold should have an open and interconnected porous architecture to facilitate homogenous cell distribution. Moreover, the scaffolds should be mechanically strong to protect deformation during the formation of new skin. In this study, the hybrid scaffolds were prepared by forming funnel-like collagen or gelatin sponge on a woven poly(l-lactic acid) (PLLA) mesh. The hybrid scaffolds combined the advantages of both collagen or gelatin (good cell-interactions) and PLLA mesh (high mechanical strength). The hybrid scaffolds were used to culture dermal fibroblasts for dermal tissue engineering. The funnel-like porous structure promoted homogeneous cell distribution and extracellular matrix production. The PLLA mesh reinforced the scaffold to avoid deformation. Subcutaneous implantation showed that the PLLA–collagen and PLLA–gelatin scaffolds promoted the regeneration of dermal tissue and epidermis and reduced contraction during the formation of new tissue. These results indicate that funnel-like hybrid scaffolds can be used for skin tissue regeneration.     

Cohesive failure of adhesive joints

Abstract

Present interest in adhesives is intense, since in many ways they provide the ideal means of joining components, especially those assembled by robot techniques. In this paper, it is shown how the measured strength of an adhesive joint reflects the interaction between the properties of substrate, adhesive, and the interface between them. Work is discussed which shows how the peel strengths of model systems have been varied by both altering the interfacial bonding and changing the mechanical properties of the adhesive. Appropriate changes to surface topography as well as the introduction into the adhesive of second ‘phases’, which may be hard or soft, or even bubbles, can produce significant joint toughening in a range of adhesive joints. For the future, improved prediction of joint service properties from design data is to be expected. This will come from the further application to adhesive joints of fracture mechanics, time–temperature superposition techniques, slipline field theory, and finite element analysis.

MST/723     

On the mechanical properties of bovine serum albumin (BSA) adhesives

Biological adhesives, natural and synthetic, are of current active interest. These adhesives offer significant advantages over traditional sealant techniques, in particular, they are easier to use, and can play an integral part in the healing mechanism of tissue. Thus, biological adhesives can play a major role in medical applications if they possess adequate mechanical behavior and stability over time. In this work, we report on the method of preparation of bovine serum albumin (BSA) into a biological adhesive. We present quantitative measurements that show the effect of BSA concentration and cross-linker content on the bonding strength of BSA adhesive to wood. A comparison is then made with synthetic poly(glycidyl methacrylate) (PGMA) adhesive, and a commercial cyanoacrylate glue, which was used as a control adhesive. In addition, BSA samples were prepared and characterized for their water content, tensile strength, and elasticity. We show that on dry surface, BSA adhesive exhibits a high bonding strength that is comparable with non-biological commercial cyanoacrylate glues, and synthetic PGMA adhesive. Tensile testing on wet wood showed a slight increase in the bonding strength of BSA adhesive, a considerable decrease in the bonding strength of cyanoacrylate glue, and negligible adhesion of PGMA. Tests performed on BSA samples demonstrate that initial BSA concentration and final water content have a significant effect on the stress–strain behavior of the samples.     

The effects of thermal cycle and nanostructure reinforcement on the shear load in adhesively bonded joints

Abstract

In this study, the shear strength of a nanocomposite adhesive was experimentally and numerically investigated under ambient temperature and thermal cycling conditions. This study used the Thick Adherend Shear Test method, which is commonly used to determine the shear stress–displacement of adhesives. Shear–displacement was determined by an extensometer to accurately compare results obtained from the Thick Adherend Shear Test results for joints with numerical analyses. As a result, when the shear failure load obtained from experiments was examined, the nanocomposite adhesives, obtained by adding a nanostructure into the adhesive, improved both the ambient temperature and thermal cycling performances of the joints.     

Single-walled carbon nanotube–epoxy composites for structural and conductive aerospace adhesives

Single-walled carbon nanotubes (SWCNTs) were incorporated at low loading (up to ∼1 wt%) into an unfilled aerospace-grade epoxy system, to impart electrical conductivity while maintaining structural bonding capability, as a route for development of a structural and conductive adhesive. At these low SWCNT loadings the tensile properties were maintained or improved, while strength decreased in a higher loading case. The structural bonding performance of composite-to-composite joints, evaluated in lap-shear and peel tests, was reasonably maintained for adhesives containing 0.5 wt% or 1 wt% SWCNTs. In the case of the 0.5 wt% SWCNT–adhesive, peel and lap-shear strength were unchanged while the addition of 1 wt% resulted in 30% increase of peel strength but the lap-shear strength was reduced by 10–15%. For 1 wt% SWCNT–adhesives, conductivities as high as 10⁻¹ S m⁻¹ and typically ∼10⁻³ S m⁻¹ were achieved. Joint electrical resistance measured between aluminum adherends was larger than predicted by the bulk conductivity, but was reduced by a post-treatment step resulting in apparent joint conductivities within one order of magnitude of the bulk samples.     

PLLA–collagen and PLLA–gelatin hybrid scaffolds with funnel-like porous structure for skin tissue engineering

In skin tissue engineering, a three-dimensional porous scaffold is necessary to support cell adhesion and proliferation and to guide cells moving into the repair area in the wound healing process. Structurally, the porous scaffold should have an open and interconnected porous architecture to facilitate homogenous cell distribution. Moreover, the scaffolds should be mechanically strong to protect deformation during the formation of new skin. In this study, the hybrid scaffolds were prepared by forming funnel-like collagen or gelatin sponge on a woven poly(l-lactic acid) (PLLA) mesh. The hybrid scaffolds combined the advantages of both collagen or gelatin (good cell-interactions) and PLLA mesh (high mechanical strength). The hybrid scaffolds were used to culture dermal fibroblasts for dermal tissue engineering. The funnel-like porous structure promoted homogeneous cell distribution and extracellular matrix production. The PLLA mesh reinforced the scaffold to avoid deformation. Subcutaneous implantation showed that the PLLA–collagen and PLLA–gelatin scaffolds promoted the regeneration of dermal tissue and epidermis and reduced contraction during the formation of new tissue. These results indicate that funnel-like hybrid scaffolds can be used for skin tissue regeneration.     

Evaluation of hydrogels for soft tissue adhesives <Emphasis Type="Italic">in vitro</Emphasis> and <Emphasis Type="Italic">in vivo</Emphasis> analyses

In this study, natural materials (sodium alginate, dextran, gelatin and carboxymethyl chitosan) were modified to get aldehyde components and amino components. Upon mixing the two-component solutions together, four kinds of Schiff base hydrogels formed successfully within 5-300 s and could seal the wound tissue. The cytotoxicity tests of hydrogel extraction solution confirmed that the hydrogels are nontoxic materials. The adhesive ability was evaluated in vivo by measuring the adhesive strength after sealing the skin incisions on the back of rats. All the hydrogels showed higher adhesive strength than that of commercial fibrin glue and the blank control. The histological staining observation by hematoxylin and eosin staining (HE) and Masson’s trichrome staining (MTC) methods suggested that the hydrogels had good biocompatibility and biodegradation in vivo. They have only normal initial inflammation to skin tissue and could improve the formation of new collagen in the incision section. So, the prepared hydrogels were both safe and effective tissue adhesive, which had the great potentials to be used as skin tissue adhesive.     

Klebflächenvorbehandlung von Aluminiumoberflächen mit SIP‐Haftvermittler

Surface pretreatment for adhesive bonding of aluminium with adhesive mediator SIP The present contribution describes the influence of different surface pretreatments including adhesive mediator SIP for adhesive bonding of aluminium alloy AlMg4,5Mn0,4. The investigations were performed using two cold hardening two‐components epoxy‐adhesives, one hot hardening one‐component epoxy‐adhesive and one cold hardening two‐components polyurethane‐adhesive. The adhesive bonds with epoxy‐adhesives show after three‐step pretreatment degreasing + corundblasting + SIP coating the highest adhesive strength values whereas adhesive bonds with polyurethane‐adhesive showed a decrease of bond strength as compared with the delivering surface condition.     

Klebtechnik – multifunktionales Fügen für den nachhaltigen Werkstoffeinsatz im 21. Jahrhundert

Adhesive bonding technology – multifunctional joining for the sustainable use of materials in the 21^st century Adhesive bonding meets the key requirements for the sustainable joining technology of the 21^st Century: different materials can be assembled with integrated additional functions in a weight saving manner. The review paper outlines introductory the origin and the commercial relevance of adhesive bonding technology. Methods of surface treatment and the meaning of adhesion and cohesion are discussed. The classification of the adhesives occurs according to the setting mechanism. The right selection is explained. The comparison with other joining technologies is important for the assessment of adhesive bonding. The geometric design of the joint is based on construction guidelines: one should avoid stress peaks and maximize the glue area. Simple notes for the strength calculation make dimensioning easier. Materials testing in adhesive bonding engineering is described. The thick‐adherend tensile shear test is suited for the in situ determination of mechanical characteristics. Applications of adhesive bonding in aviation and aerospace and transportation are presented. Besides these traditional industries, new markets in sectors like electronics and medicine are opened up. Due to high strength and deformability, chemically curing products solve demanding tasks in adhesive bonding and sealing technology.     

Klebflächenvorbehandlung von Aluminiumoberflächen mit Haftvermittler

Surface pretreatment for adhesive bonding of aluminum with adhesive mediator The influence of three steps pretreatment degreasing, blasting and primer and the two steps pretreatment degreasing and blasting on the adhesive behaviour of aluminum alloy AlMg4,5Mn0,5 were investigated. The investigations were preformed using two cold hardening two‐components epoxy adhesives, one hot hardening one‐component epoxy adhesive and one cold hardening two‐components polyurethane adhesive. The three steps pretreatment indicate that the adhesion bonding strength by epoxy adhesives are higher than that by two steps pretreatment. On the other hand, the adhesion bonding strength was similar by using polyurethane adhesive independence of the pretreatment method. Leaving out the pretreatment step degreasing after corund blasting caused by using, PU, EP 2 and EP 3 adhesives a significant decreasing of the bonding strength in comparison with the only degreased specimen. This degreasing process was used to remove the residual blasting medium from the aluminum surfaces after blasting. The topographical structure of the surfaces after corund blasting was covered by further pretreatment with primer as a consequence of higher primer viscosity, which causes a decreasing in the surface roughness. The chemical composition of pretreated surfaces by three steps was different from that by two steps.     

Promotion of osteogenic differentiation of stem cells and increase of bone-bonding ability in vivo using urease-treated titanium coated with calcium phosphate and gelatin

Abstract

Because of its excellent biocompatibility and low allergenicity, titanium has been widely used for bone replacement and tissue engineering. To produce a desirable composite with enhanced bone response and mechanical strength, in this study bioactive calcium phosphate (CaP) and gelatin composites were coated onto titanium (Ti) via a novel urease technique. The cellular responses to the CaP/gelatin/Ti (CaP/gel/Ti) and bone bonding ability were evaluated with proliferation and osteogenic differentiation of mesenchymal stem cells (MSCs) on CaP/gel/Ti and CaP/Ti in vitro. The results showed that the optical density values, alkaline phosphatase expression and genes expression of MSCs on CaP/gel/Ti were similar to those on CaP/Ti, yet significantly higher than those on pure Ti (p < 0.05). CaP/gel/Ti and CaP/Ti rods (2 mm in diameter, 10 mm in length) were also implanted into femoral shaft of rabbits and pure Ti rods served as control (n = 10). Histological examination, scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) measurements were performed at 4 and 8 weeks after the operation. The histological and SEM observations demonstrated clearly that more new bone formed on the surface of CaP/gel/Ti than in the other two groups at each time point. The CaP/gel/Ti bonded to the surrounding bone directly with no intervening soft tissue layer. An interfacial layer, containing Ti, Ca and P, was found to form at the interface between bone and the implant on all three groups by EDS analysis. However, the content of Ca, P in the surface of CaP/gel/Ti implants was more than in the other two groups at each time point. The CaP/gel/Ti modified by the urease method was not only beneficial for MSCs proliferation and osteogenic differentiation, but also favorable for bone bonding ability on Ti implants in vivo, suggesting that Ti functionalized with CaP and gelatin might have a great potential in clinical joint replacement or dental implants.     

Adhesion and structure properties of protein nanomaterials containing hydrophobic and charged amino acids

Protein polymers are being used or considered for biobased adhesives and coating materials. Most adhesives derived from macro protein molecules work through receptors or cross-links to bring about adhesion. The adhesion mechanism of protein polymers would lead to better understanding of adhesives and the discovery of new practical properties of protein polymers at both nano- and macro-scales. The objective of this research work was to study adhesion properties of protein polymers at nanoscale (a peptide adhesive with nanometer-scale units that range in size of several nanometers, defined as protein nanomaterial). Seven protein nanomaterial samples with different degrees of adhesive strength were designed and synthesized using solid phase chemistries. All protein nanomaterials contain a common hydrophobic core flanked by charged amino acid sequences. The adhesion properties of the protein nanomaterials were investigated at different pH values and curing temperatures. The protein nanomaterials self aggregate and interact with the wood surface. The protein nanomaterial KKK-FLIVIGSII-KKK identified in this study had high adhesive strength toward wood. It had the highest shear strength at pH 12, with an amino acid sequence that was very hydrophobic and uncharged. This protein nanomaterial underwent structural analyses using circular dichroism, laser-Fourier transform infrared, and laser desorption mass spectrometry. At pH 12 this peptide adopted a pH-induced beta-like conformation. Adhesive strength reflects contributions of both hydrogen bonding and van der Waals interactions. Ionic and covalent bonds do not appear to be significant factors for adhesion in this study.     

改性大豆蛋白基胶黏剂的研究进展

目的 解决大豆蛋白胶黏剂胶合强度低、粘度大的问题,使制得的胶黏剂能满足室内使用人造板及胶合制品的要求.方法 通过综述改性大豆蛋白胶黏剂在胶合强度、粘度方面的研究进展,分析原子转移自由基聚合(ATRP)法改性大豆蛋白胶黏剂的前景.结论 采用ATRP对大豆蛋白进行接枝改性,可在提高胶合强度的同时保障粘度适中.ATRP改性大豆蛋白胶黏剂为改性大豆蛋白胶黏剂的研究提供了新的探索道路,对制备粘度适中、胶合强度.     

液相连接氮化硅陶瓷的结合强度研究

本文用玻璃焊料研究了氮化硅陶瓷的液相连接,探讨了组份（0～10wt％α－Si₃N₄）、温度（1450～1650℃）和保温时间（10～120min）对结合强度的影响规律．结果表明,α－Si₃N₄的加入提高了液态焊料的粘度,降低了焊料的流动性,导致结合强度下降．采用组份为不含α－Si₃N₄的纯氧化物玻璃焊料在1600℃、保温30min可以得到较为理想的结合强度．     

固化条件对环氧树脂胶黏剂粘合强度的影响

研究了不同固化条件(温度、湿度)以及反应物配比对环氧树脂胶黏剂粘合强度的影响。结果表明,在使用环氧树脂胶黏剂粘接橡胶与金属基体时,固化条件对其粘接效果产生了显著影响。当温度为25 ℃,环氧树脂胶黏剂在湿度小于55%时粘合强度较高,湿度过高,粘合强度会明显下降,说明过于潮湿的环境不利于环氧树脂胶黏剂的应用。当湿度为55%,环氧树脂胶黏剂在20~25 ℃时粘合强度较高,当温度升高或者降低至10 ℃时,粘合强度都会有明显下降。      

Transient liquid phase diffusion bonding of continuous SiC fibre reinforced Ti–6AI–4V composite to Ti–6AI–4V alloy

Abstract

A continuous SiC fibre reinforced Ti–6Al–4V composite was diffusion bonded in transient liquid phase to Ti–6Al–4V alloy plate using Ti–Cu–Zr amorphous filler metal. Joint strength increased with bonding time up to 1·8 ks and reached the maximum value of 850 MN m^?2 which corresponded to 90% of the tensile strength of Ti–6Al–4V. The extent of deformation of Ti–6Al–4V in the vicinity of the bonding interface was small compared with that of solid diffusion bonding because of the low bonding pressure. The bonding layer had an acicular microstructure which was composed of Ti₂Cu and α titanium with dissolved zirconium. Brittle products such as (Ti, Zr )₅ Si₃ or (Ti, Zr )₅ Si₄ were formed at the interface between the SiC fibres and the filler metal. These products existed only at the end of fibres, in very small amounts, therefore joint strength was not significantly affected by the products.

MST/1989     

Application of Bionic Design to FRP T-Joints

We applied the concepts of bionics to enhance the mechanical strength of fiberglass reinforced plastic T-joints. The failure modes of the designed arthrosis-like and gum-like joints were determined using three-point bending tests and numerical simulations and compared with those of normal T-joints bonded using structural adhesives. In the simulation, we used cohesive elements to simulate the adhesive interface of the structural adhesive. The experimental and simulation results show that the arthrosis-like joint can effectively delay the failure progress and enhance the bonding strength of T-joints, thus confirming that an appropriate bionic design can effectively control the bonding properties of structural adhesives.