Design of low-order linear-phase IIR filters via orthogonalprojection

This paper presents an indirect linear-phase IIR filter design technique based on a reduction of linear-phase FIR filters. The desired filter is obtained by minimizing the L₂ norm of the difference between the original FIR filter and the lower order IIR filter. We first establish a relationship between the Hankel singular values of the discarded part of the FIR filter and the L₂ norm of the corresponding filter approximation error based on model truncation. This result motivates us to propose a simple finite search method that will achieve better approximation results than commonly used truncation methods such as the balanced truncation (BT) and the impulse response gramian (IRG) methods. We then develop an iterative algorithm for finding an optimal IIR filter based on a matrix projection of the original FIR filter. The convergence of the proposed algorithm is established. Filters designed using the proposed algorithm are compared with those obtained by other techniques with respect to the amplitude response and group delay characteristics in the passband. Numerical examples show that the proposed algorithm offers the best performance     

Two-channel IIR QMF banks with approximately linear-phase analysisand synthesis filters

Perfect linear-phase two-channel QMF banks require the use of finite impulse response (FIR) analysis and synthesis filters. Although they are less expensive and yield superior stopband characteristics, perfect linear phase cannot be achieved with stable infinite impulse response (IIR) filters. Thus, IIR designs usually incorporate a postprocessing equalizer that is optimized to reduce the phase distortion of the entire filter bank. However, the analysis and synthesis filters of such an IIR filter bank are not linear phase. In this paper, a computationally simple method to obtain IIR analysis and synthesis filters that possess negligible phase distortion is presented. The method is based on first applying the balanced reduction procedure to obtain nearly allpass IIR polyphase components and then approximating these with perfect allpass IIR polyphase components. The resulting IIR designs already have only negligible phase distortion. However, if required, further improvement may be achieved through optimization of the filter parameters. For this purpose, a suitable objective function is presented. Bounds for the magnitude and phase errors of the designs are also derived. Design examples indicate that the derived IIR filter banks are more efficient in terms of computational complexity than the FIR prototypes and perfect reconstruction FIR filter banks. Although the PR FIR filter banks when implemented with the one-multiplier lattice structure and IIR filter banks are comparable in terms of computational complexity, the former is very sensitive to coefficient quantization effects     

A direct approach to H2 optimal deconvolution ofperiodic digital channels

This paper studies the H₂ optimal deconvolution problem for periodic finite impulse response (FIR) and infinite impulse response (IIR) channels. It shows that the H₂ norm of a periodic filter can be directly quantified in terms of periodic system matrices and linear matrix inequalities (LMIs) without resorting to the commonly used lifting technique. The optimal signal reconstruction problem is then formulated as an optimization problem subject to a set of matrix inequality constraints. Under this framework, the optimization of both the FIR and IIR periodic deconvolution filters can be made convex, solved using the interior point method, and computed by using the Matlab LMI Toolbox. The robust deconvolution problem for periodic FIR and IIR channels with polytopic uncertainties are further formulated and solved, also by convex optimization and the LMIs. Compared with the lifting approach to the design of periodic filters, the proposed approach is simpler yet more powerful in dealing with multiobjective deconvolution problems and channel uncertainties, especially for IIR deconvolution filter design. The obtained solutions are applied to the design of an optimal filterbank yielding satisfactory performance     

General IIR optical filter design for WDM applications usingall-pass filters

A general design algorithm is presented for infinite impulse response (IIR) bandpass and arbitrary magnitude response filters that use optical all-pass filters as building blocks. Examples are given for an IIR multichannel frequency selector, an amplifier gain equalizer, a linear square-magnitude response, and a multi-level response. Major advantages are the efficiency of the IIR filter compared to finite impulse response (FIR) filters, the simplicity of the optical architecture, and its tolerance for loss. A reduced set of unique operating states is discussed for implementing a reconfigurable multichannel selection filter     

基于FIR与相位补偿IIR滤波器的雷达回波信号处理

FIR与IIR频率选择滤波器的设计,被广泛应用于数字信号处理领域之中。文章以雷达回波信号的数字处理为例,首先分别设计FIR,IIR滤波器完成了对信号特定频率分量的滤除。进而,针对IIR滤波器的非线性相位,基于最优化设计全通系统实现了相位补偿,并对FIR,IIR滤波器进行了综合比较。     

Least-squares design of IIR filters with prescribed magnitude andphase responses and a pole radius constraint

This paper presents a method for the frequency domain design of infinite impulse response (IIR) digital filters. The proposed method designs filters approximating prescribed magnitude and phase responses. IIR filters of this kind can have approximately linear-phase responses in their passbands, or they can equalize magnitude and phase responses of given systems. In many cases, these filters can be implemented with less memory and with fewer computations per output sample than equivalent finite impulse response (FIR) digital filters. An important feature of the proposed method is the possibility to specify a maximum radius for the poles of the designed rational transfer function. Consequently, stability can be guaranteed, and undesired effects of implementations using fixed-point arithmetic can be alleviated by restricting the poles to keep a prescribed distance from the unit circle. This is achieved by applying Rouche's theorem in the proposed design algorithm. We motivate the use of IIR filters with an unequal number of poles and zeros outside the origin of the complex plane. In order to satisfy simultaneous specifications on magnitude and phase responses, it is advantageous to use IIR filters with only a few poles outside the origin of the z-plane and an arbitrary number of zeros. Filters of this type are a compromise between IIR filters with optimum magnitude responses and phase-approximating FIR filters. We use design examples to compare filters designed by the proposed method to those obtained by other methods. In addition, we compare the proposed general IIR filters with other popular more specialized structures such as FIR filters and cascaded systems consisting of frequency-selective IIR filters and phase-equalizing allpass filters     

Q value analysis of microwave photonic filters

This paper first presents the fundamental principles of the microwave photonic filters.As an example to explain how to implement a microwave photonic filter, a specific finite impulse response (FIR) filter is illustrated.Next, the Q value of the microwave photonic filters is analyzed theoretically, and methods around how to gain high Q value are discussed.Then,divided into FIR filter, first-order infinite impulse response (IIR) filter, and multi-order IIR filter, several novel microwave photonic filters with high Q value are listed and compared.The technical difficulties to get high Q value in first-order IIR filter and multi-order IIR filter are analyzed concretely.Finally, in order to gain higher Q value, a multi-order IIR microwave photonic filter that easily extends its order is presented and discussed.     

Low-power digital filtering using approximate processing

We present an algorithmic approach to the design of low-power frequency-selective digital filters based on the concepts of adaptive filtering and approximate processing. The proposed approach uses a feedback mechanism in conjunction with well-known implementation structures for finite impulse response (FIR) and infinite impulse response (IIR) digital filters. Our algorithm is designed to reduce the total switched capacitance by dynamically varying the filter order based on signal statistics. A factor of 10 reduction in power consumption over fixed-order filters is demonstrated for the filtering of speech signals     

Synthesis of coherent two-port optical delay-line circuit with ringwaveguides

A method has already been reported by the author and others for synthesizing coherent two-port lattice-form optical delay-line circuits which have the same filter characteristics as finite impulse response (FIR) digital filters. This paper proposes a two-port circuit configuration with ring waveguides which can realize the same filter characteristics as infinite impulse response (IIR) digital filters. It also describes a synthesis method for realizing arbitrary IIR filter characteristics with the circuit configuration. This method is based on scattering matrix factorization. Some synthesis examples are demonstrated including an elliptic filter, a Butterworth filter, an optical filter with maximally flat group-delay characteristics, a group-delay dispersion equalizer, and a multichannel selector     

Weighted least-squares approximation of FIR by IIR digital filters

This paper presents a method for the weighted least-squares approximation of finite impulse response (FIR) filters by infinite impulse response (IIR) filters. It is shown, how a solution to this approximation problem can be obtained by solving a related pure least-squares approximation problem. For the latter, we utilize a generalized version of a previously published technique with low computational complexity and guaranteed stability of the IIR filters. Unlike the well-established model-reduction approaches that are carried out in the state space, our method works directly with the numerator and denominator coefficients of the transfer functions. Thus, the influence of finite-precision arithmetic on the results is small. This makes our approach applicable for the approximation of large-order FIR filters and allows the usage of arbitrarily shaped weighting functions. It is shown that our method can successfully be employed to achieve a uniform approximation     

Analysis and design of periodically time-varying IIR filters, withapplications to transmultiplexing

Fundamental constraints on the form of infinite impulse response (IIR) periodically time-varying (PTV) filters are identified, and a design technique with well-defined error and stability characteristics based on those constraints is presented. The design technique is based on the selection of poles and zeros within the time-invariant filter banks of equivalent PTV filter analysis structures. A simple example is presented to illustrate the design method, which implements the IIR PTV as a time-invariant all-feedback IIR filter of the form 1/D(z^P) cascaded with an finite impulse response (FIR) PTV filter. An application of IIR PTV filters to telecommunications transmultiplexing is presented to illustrate the design method and for comparison to an existing PTV design method. The computational complexity of the resulting system compares favorably with that of existing transmultiplexers     

An FIR Channel Estimation Filter with Robustness to Channel Mismatch Condition

This letter proposes a finite impulse response (FIR) channel estimation filter that has robustness against the channel mismatch due to the FIR structure. The channel impulse response is described with a complex state space model and then estimated from received data on the recent time interval. Numerical results show that the FIR channel estimation filter can provide more robust performance than conventional Kalman IIR filters when channel model parameters are not correct.     

Optical half-band filters

This paper proposes two kinds of novel 2×2 circuit configuration for finite-impulse response (FIR) half-band filters. These configurations can be transformed into each other by a symmetric transformation and their power transmittance is identical. The configurations have only about half the elements of conventional FIR lattice-form filters. We derive a design algorithm for achieving desired power transmittance spectra. We also describe 2×2 circuit configurations for infinite-impulse response (IIR) half-band filters. These configurations are designed to realize arbitrary-order IIR half-band filter characteristics by extending the conventional half-band circuit configuration used in millimeter-wave devices. We discuss their filter characteristics and confirm that they have a power half-band property. We demonstrate design examples including FIR maximally flat half-band filters, an FIR Chebyshev half-band filter, and an IIR elliptic half-band filter     

FIR Beamforming for Frequency-Selective Channels with Linear Equalization

In this letter, we consider transmit beamforming with finite impulse response (FIR) filters for frequency-selective channels and simple linear equalization at the receiver. Since a closed-form solution for the optimum FIR beamforming filters (BFFs) does not seem to exist, an efficient numerical method for their recursive calculation is developed. Our numerical results show that for typical GSM/EDGE channels short FIR BFFs can closely approach the performance of the optimum infinite impulse response (IIR) BFFs derived in [1] and yield significant gains over single-antenna transmission.     

Design of 3-D Noncausal Filters with Small Roundoff Noise and No Overflow Oscillations

The contribution of this paper consists of two individual parts. First, an invertible mapping technique is presented for 3-D digital system design, and it is applied to approximate 3-D noncausal filters in the spatial domain. Secondly, an algorithm is proposed for obtaining a structure for 3-D IIR filters with small roundoff noise and no overflow oscillations. The design of noncausal filters can be carried out by three steps: 1), a given noncausal impulse response is transformed into the first octant using the proposed 3-D invertible mapping technique; 2), the transformed impulse response in the first octant is approximated by balanced model reduction of 3-D separable denominator systems;3), the resultant 3-D IIR filter is transformed back to the original coordinates.     

A digital signal processing approach to interpolation

In many digital signal precessing systems, e.g., vacoders, modulation systems, and digital waveform coding systems, it is necessary to alter the sampling rate of a digital signal Thus it is of considerable interest to examine the problem of interpolation of bandlimited signals from the viewpoint of digital signal processing. A frequency dmnain interpretation of the interpolation process, through which it is clear that interpolation is fundamentally a linear filtering process, is presented, An examination of the relative merits of finite duration impulse response (FIR) and infinite duration impulse response (IIR) digital filters as interpolation filters indicates that FIR filters are generally to be preferred for interpolation. It is shown that linear interpolation and classical polynomial interpolation correspond to the use of the FIR interpolation filter. The use of classical interpolation methods in signal processing applications is illustrated by a discussion of FIR interpolation filters derived from the Lagrange interpolation formula. The limitations of these filters lead us to a consideration of optimum FIR filters for interpolation that can be designed using linear programming techniques. Examples are presented to illustrate the significant improvements that are obtained using the optimum filters.     

IIR Filter Adaptation Using Branch-and-Bound: A Novel Approach

Adaptive infinite impulse response (IIR) filters provide significant advantages over equivalent finite impulse response (FIR) implementations because they are able to more accurately model physical plants that have pole-zero structures. Additionally, they are typically capable of meeting performance specifications using fewer filter parameters. This savings in parameters, which can be as much as 5–10 times, leads to the use of fewer multiplier blocks and therefore, lower power consumption. Despite these advantages, adaptive IIR filters have not found widespread use because the associated mean squared error (MSE) cost function is multimodal and therefore, significantly difficult to minimize. Additionally, the filter can become unstable during adaptation. These two properties pose several problems for adaptive algorithms, causing them to be sensitive to initial conditions, produce biased solutions, unstable filter configurations or converge to local minima. These problems prevent the widespread use of adaptive IIR filters in practice and if such filter structures are to become more practical, new, innovative solutions are required. This paper proposes a new algorithm for minimizing the MSE cost function of adaptive IIR filters aimed at addressing some of the aforementioned issues. We adopt the approach of using a Branch-and-Bound algorithm, which is an exhaustive search method, and employ interval arithmetic for all computations. Simulation results show that the resulting algorithm is viable and competitive and, when compared with a number of existing state-of-the-art algorithms, outperforms them in terms of the MSE of the final point.      

Relative optimization for blind deconvolution

We propose a relative optimization framework for quasi-maximum likelihood (QML) blind deconvolution and the relative Newton method as its particular instance. Special Hessian structure allows fast Newton system construction and solution, resulting in a fast-convergent algorithm with iteration complexity comparable to that of gradient methods. We also propose the use of rational infinite impulse response (IIR) restoration kernels, which constitute a richer family of filters than the traditionally used finite impulse response (FIR) kernels. We discuss different choices of nonlinear functions that are suitable for deconvolution of super- and sub-Gaussian sources and formulate the conditions under which the QML estimation is stable. Simulation results demonstrate the efficiency of the proposed methods.