Determination of Electron Collision Cross Sections Set for Tetramethysilane

A swarm analysis technique based on the solution of the Boltzmann equation is used to derive low energy electron collision cross sections for tetramethylsilane （TMS）. The calculated swarm parameters with this first available cross sections set is consistent with measured values of the swarm parameters. Calculations of transport parameters in mixtures of TMS with argon are also presented.     

Dosimetric Analyses of Single Particle Microbeam in Cell Irradiation Experiment

Single particle microbeam （SPM） is uniquely capable of delivering precisely the predefined number of charged particles to determined individual cells or sub-cellular targets in situ. It has been recognized as a powerful technique for unveiling ionization irradiation mechanisms of organism. This article describes some investigations on the irradiation quality of SPM of major world laboratories by means of Monte Carlo method based on dosimetry and microdosimetry. Those parameters are helpful not only to improve SPM irradiating cell experiments but also to study the biological effects of cells irradiated by SPM.     

Calculation of Plasma Radiation in Electrothermal-Chemical Launcher简

A numerical model of radiation has been adopted for electrothermM-chemical （ETC） launcher, in which Monte Carlo method and statistical physics are employed to simulate the process of a capillary plasma source in an ETC launcher. The effect on propellant grains with different average absorption coefficients is discussed. The plasma-propellant interaction is also discussed when combined with a thermal model. Results show that the strong instantaneous radiation is responsible for the transmission of energy to the propellant grains leading to ignition. The efficiency of energy absorption in the propellant bed always maintains a high level. Radiant energy caused by plasma is concentrated around the plaslna injector. And the ＂hot zone＂ efficiency is mainly affected by the properties of propellant grains within a small field around the plasma injector.     

Characterization of Nitrogen Glow Discharge Plasma via Optical Emission Spectrum Simulation

Optical emission spectroscopy in nitrogen glow discharge plasma is simulated, and the collision excitations and characteristic emissions of the species （N2, N2^＋, N^＋, N） are investigated by a Monte Carlo model for nitrogen molecular gas discharge. The excitation rates of the main excited states are calculated and the corresponding relation and relative magnitude between the distribution of excitation rate of a certain excited state and the distributions of the emission rates of various lines originating from this excited level are also explored. The simulated results are compared with the experimental measurements in two typical discharge conditions. The luminescence mechanism of the line N2^＋： 391.4 nm is explained based on the microscopic plasma processes. The cathode glow in N2 discharge is found to be mainly caused by N^＋ impact excitation and the intensity of cathode glow decreases with the voltage. The corresponding relation between the emission rate or intensity of the 391.4 nm line and the production rate and the density of N2^＋ is also examined.     

A study of quasi-absolute method in photon activation analysis

Relative methods, which are performed with the assistance of reference materials, are widely used in photon activation analysis(PAA). On the contrary, absolute methods, which are conducted without any reference material, are rarely applied due to the difficulty in obtaining photon flux. To realize absolute measurement in PAA,we retrieve photon flux in the sample via Monte Carlo simulation and raise a novel procedure—quasi-absolute method. With simulated photon flux and cross section data from existing databases, it is possible to calculate the concentration of target elements in the sample straightforwardly. A controlled experiment indicates that results from the quasi-absolute method for certain elements are nearly comparable to relative methods in practice.This technique of absolute measurement has room for improvement in the future and can serve as a validation technique for experimental data on cross sections as well.     

Kinetic Monte Carlo Simulation of Deposition of Co Thin Film on Cu（001）

A kinetic Monte Carlo （kMC） simulation is conducted to study the growth of ultrathin film of Co on Cu（001） surface. The many-body, tight-binding potential model is used in the simulation to represent the interatomic potential. The film morphology of heteroepitaxial Co film on a Cu（001） substrate at the transient and final state conditions with various incident energies is simulated. The Co covered area and the thickness of the film growth of the first two layers are investigated. The simulation results show that the incident energy influences the film growth and structure. There exists a transition energy where the interracial roughness is minimum. There are some void regions in the film in the final state, because of the influence of the island growth in the first few layers. In addition, there are deviations from ideal layer-by-layer growth at a coverage from 0 - 2 monolayers （ML）.     

Comparison between nuclear thermometers in central Xe＋Sn collision

The temperature of fragmenting source in central heavy-ion collisions at Fermi energy is investigated by the isospin-dependent quantum molecular dynamics model in combination with the statistical decay model GEMINI. Five different nuclear thermometers are used to extract nuclear temperature. We find that the He and Li isotope temperature reaches a plateau at about 70-100 MeV/nucleon of beam energy. The slope temperature and the quadrupole fluctuation temperature give high values. The quantum slope temperature and the quantum quadrupole fluctuation temperature are more close to the He and Li isotope temperatures.     

Experimental Study of the Recovery Times of Spark Gap Switch with Different Gases

A two-pulse method is used to determine the insulation recovery time of the gas spark gap switch with different types of gas applied in a high power accelerator with a water dielectric pulse forming line. At the breakdown voltage of 450 kV, with the vacuum diode voltage of about 200 kV, and a current of 30 kA, recovery characteristics of H2, N2, SF6 were studied. The recovery percentages of the gas breakdown voltage and vacuum diode voltage were determined. The results show that hydrogen has the best recovery characteristics. At a pulse interval of 8.8 ms, the recovery percentages of both the gas breakdown voltage and vacuum diode voltage for hydrogen exceed 95%. For SF6 and N2 with an interval of 25 ms and 50 ms respectively, a 90% voltage recovery was obtained. The experiments also proved that the repetitive rate of the high power accelerator with a pulse forming line is mainly restricted by the gas switch repetitive rate; the recovery percentages of the vacuum diode voltage are limited by the recovery percentages of the gas switch breakdown voltage. The hydrogen switch can be employed for a high repetitive rate-high power accelerator with a pulse forming line.     

Ultra-Low Breakdown Voltage of Field Ionization in Atmospheric Air Based on Silicon Nanowires

Classic field ionization requires extremely high positive electric fields,of the order of a few million volts per centimeter.Here we show that field ionization can occur at dramatically lower fields on the electrode of silicon nanowires(SiNWs)with dense surface states and large field enhancement factor.A field ionization structure using SiNWs as the anode has been investigated,in which the SiNWs were fabricated by improved chemical etching process.At room temperature and atmospheric pressure,breakdown of the air is reproducible with a fixed anode-to-cathode distance of 0.5μm.The breakdown voltage is~38 V,low enough to be achieved by a batterypowered unit.Two reasons can be given for the low breakdown voltage.First,the gas discharge departs from the Paschen’s law and the breakdown voltage decreases sharply as the gap distance falls inμm range.The other reason is the large electric field enhancement factor(β)and the high density of surface defects,which cause a highly non-uniform electric field for field emission to occur.     

Experimental Study of a Minitype Atmospheric Non-equilibrium Plasma Source

A mini-type of plasma source was studied experimentally. The results showed that the plasma density, which was generated by an atmospheric non-equilibrium plasma source, rises with the increase in driving electric-field and the momentum of gas particles. For a driving electricfield of 56 kV/cm and a gas particles＇ momentum of 10^9 × 10^-22 g·m/s, the ion density can exceed 10^10/cm^3 while the effective volume of the plasma source is only 2.5 cm^2. This study may help develop a method to generate a minitype plasma source with low energy consumption but high ion concentration. This source can be used in chemical industry, environmental engineering and military applications.     

Physics Analysis and Optimization Studies for a Fusion Neutron Source Based on a Gas Dynamic Trap

To further investigate the fusion neutron source based on a gas dynamic trap （GDT）, characteristics of the GDT were analyzed and physics analyses were made for a fusion neutron source based on the GDT concept. The prior design of a GDT-based fusion neutron source was optimized based on a refreshed understanding of GDT operation. A two-step progressive development route of a GDT-based fusion neutron source was suggested. Potential applications of GDT are discussed. Preliminary analyses show that a fusion neutron source based on the GDT concept is suitable for plasma-material interaction research, fusion material and subcomponent testing, and capable of driving a proof-of-principle fusion fission hybrid experimental facility.     

Plasma-Neutral Gas Structure in a Magnesium Cathodic Arc Operating at Oxygen Gas with Experimental Comparison

The plasma-neutral gas structure generated in a magnesium cathodic arc operated with oxygen gas at a constant current of 50 A has been investigated by employing a simplified one-dimensional fluid model.The model includes elastic collisions and charge-exchange reactions between metallic particles and gas molecules,and also generation and recombination of gaseous ions by electron impact.The distribution profiles of density and velocity of species along the axial direction were obtained at diferent background gas pressures(in the range of 0.7~3.0 Pa)by this model.A comparison with the experiments was made.At lower gas pressures,the depositing particles were mainly the metallic ions with a larger kinetic energy.As the gas pressure increased,the magnesium atoms with smaller kinetic energy acted as the dominant depositing species.Determined by the minimization of the system’s total energy,MgO(100)or/and MgO(110)orientation appeared easily in the MgO films at lower gas pressures,and at higher gas pressures,the film preferred orientation was MgO(111).     

Spectrum Blueshifting of Ultrashort UV Laser Pulse Induced by Ionization of Supersonic He and Ar Gas Jets

The predominant spectral blueshifting of a sub-picosecond UV laser pulse induced by ultrafast ionization of noble gases was investigated. Spectral measurements were made at various gas densities. Typical quasi-periodic structures in the blueshifted spectrum were obtained. The observations were in connection with the so-called self-phase modulation of laser pulses in the ultrafast ionization process which was simply simulated with an ADK （Ammosov-Delone-Krainov） ionization model. Some quantitative information can be deduced from the measurements and calculations.     

The Gas Nucleation Process Study of Anatase TiO2 in Atmospheric Non-Thermal Plasma EnhancedChemical Vapor Deposition简

Abstract The gas phase nucleation process of anatase TiO2 in atmospheric non-thermal plasma enhanced chemical vapor deposition is studied. The particles synthesized in the plasma gas phase at different power density were collected outside of the reactor. The structure of the collected particles has been investigated by field scanning electron microscope （FESEM）, X-ray diffraction （XRD）, high resolution transmission electron microscopy （HRTEM） and selected area electron diffraction （SAED）. The analysis shows that uniform crystalline nuclei with average size of several nanometers have been formed in the scale of micro second through this reactive atmo- spheric plasma gas process. The crystallinity of the nanoparticles increases with power density. The high density of crystalline nanonuclei in the plasma gas phase and the low gas temperature are beneficial to the fast deposition of the 3D porous anatase TiO2 film.     

Ar~+/Ar,O_2~+/O_2 and N_2~+/N_2 Elastic Momentum Collision Cross Sections: Calculation and Validation Using the Semi-Classical Model

The aim of this paper is to obtain relevant sets of collision cross sections of the parent ions in low pressure discharges in argon, oxygen, and nitrogen, i.e., Ar＋ in Ar, O2＋ in O2 and N2＋ in N2. These ion data are first discussed and then validated from comparisons between the calculated transport coefficients and those measured in the literature. The elastic momentum transfer collision cross sections are determined from a semi-classical approximation for the phase shift calculation based on a 12-6-4 inter-particle potential while ion transport coefficients are determined versus the reduced electric field from Monte Carlo simulations.     

Development of Data Acquisition Card Driver for ICRH System on EAST

Presented in this paper is the development of the driver for the data acquisition card with a peripheral component interconnection （PCI） local bus on the ion cyclotron range of frequency heating （1CRH） system. The driver is mainly aimed at the embedded VxWorks system （real-time operating system） which is widely used in various fields of real-time systems. An efficient way is employed to develop this driver, which will advance the real-time control of the ICRH system on the experimental advanced superconductor tokamak （EAST）. The driver is designed using the TORNADO integrated development environment （IDE）, and implemented in C plus language. The details include the hardware configuration, analogue/digital （A/D） and digital/analogue （D/A） conversion, input and output （I/O） operation of the driver to support over five cards. The data acquisition card can be manipulated in a low-level program and meet the requirements of A/D conversion and D/A outputs.     

Effect of Cold Plasma Treatment on Seed Germination and Growth of Wheat简

This study investigated the effect of cold helium plasma treatment on seed germina- tion, growth and yield of wheat. The effects of different power of cold plasma on the germination of treated wheat seeds were studied. We found that the treatment of 80 W could significantly improve seed germination potential （6.0%） and germination rate （6.7%） compared to the control group. Field experiments were carried out for wheat seeds treated with 80 W cold plasma. Com- pared with the control, plant height （20.3%）, root length （9.0%） and fresh weight （21.8%） were improved significantly at seedling stage. At booting stage, plant height, root length, fresh weight, stem diameter, leaf area and leaf thickness of the treated plant were respectively increased by 21.8%, 11.0%, 7.0%, 9.0%, 13.0% and 25.5%. At the same time, the chlorophyll content （9.8%）, nitrogen （10.0%） and moisture content （10.0%） were higher than those of the control, indicating that cold plasma treatment could promote the growth of wheat. The yield of treated wheat was 7.55 t-ha-1, 5.89% more than that of the control. Therefore, our results show that cold plasma has important application prospects for increasing wheat yield.     

Role of Ion Beam Irradiation and Annealing Effect on the Deposition of AlON Nanolayers by Using Plasma Focus Device

AlON nanolayers are synthesized on Al substrate by the irradiation of energetic nitrogen ions using plasma focusing. Samples are exposed to multiple （5, 10, 15, 20 and 25） focus shots. Ion energy and ion number density range from 80 keV to 1.4 MeV and 5.6×10^19 m^- 3 to 1.3×10^19 m ^-3, respectively. Moreover, the effect of continuous annealing （473 K and 523 K） on an AlN surface layer synthesized with 25 focus shots is also examined. The main features of the X-ray diffraction （XRD） patterns with increasing focus shots are： （i） variation in the crystallinity of AlN along （111）, （200） and （311） planes, （ii） increasing average crystallite size of AlN （111） plane, and （iii） stress relaxation observed in AlN （111） and （200） planes. The crystallinity of AlN surface layer is comparatively better at 473 K annealing temperature. A broadened diffraction peak related to an aluminium oxide phase showing weak crystallinity is observed for 15 focus shots while non-bounded oxides are present in all other deposited layers. Raman and Fourier transform infrared spectroscopy （FTIR） analysis confirm the presence of AlN and Al203 for the surface layer annealed at 473 K temperature. Raman analysis shows that the overlapping of AlN and Al2Oa results in the development of residual stresses. Scanning electron microscope （SEM） results demonstrate that the formation of rounded grains （range from 20 nm to 200 nm） and variations in their microstructures features depend on the increasing number of focus shots. Decomposition of larger clusters into smaller ones is observed.     

Simulation of Electron-Beam Generating Plasma at Atmospheric Pressure

As electron-beam generating plasma is widely applied, the software tool EGS4 （Electron-Gamma Shower） was used to simulate the transmission and energy deposition of electron-beam in air. The simulation results indicated that the range of the electron-beam was inversely proportional to the gas pressure in a wide range of gas pressure, and the electron-beam of 200 keV could generate a plasma with a density 10^11 cm^-3 in air of latm. In addition, the energy distribution of the beam-electron and plasma density profile produced by the beam were achieved.