共查询到20条相似文献,搜索用时 93 毫秒
1.
FIR低通和带通滤波器的关系分析与仿真 总被引:2,自引:1,他引:1
为了避开直接设计带通滤波器的繁琐设计步骤要求,利用低通滤波器与带通滤波器的关系,间接设计带通滤波器是创新之处,即通过设计简单的低通滤波器从而达到设计带通滤波器的要求。介绍了窗函数法FIR数字低通、带通滤波器的设计,给出了低通滤波器与带通滤波器的频率响应函数,并分析了它们之间的关系,得出了相关结论,结合实例,利用Matlab证实了该结论的正确性,为带通滤波器的设计提供了一种新方法。 相似文献
2.
3.
为设计频谱性能优良的有限冲激响应( FIR)数字带通滤波器,从窗函数的性质及选择指标出发,分析了椭圆球面波函数( PSWF)作为窗函数的优势;在此基础上根据数字滤波器设计的原理和要求,选择0阶基带椭圆球面波函数作为窗函数设计数字带通滤波器,并利用微分方程状态转移矩阵逼近的PSWF求解算法,给出了基于PSWF的FIR数字带通滤波器设计方法。理论分析和仿真结果表明:PSWF数字带通滤波器具有较低的设计复杂度,与Kaiser滤波器和Blackman滤波器相比,其旁瓣衰减有超过7 dB的优势,且具有与两种滤波器相当的通带波纹波动和过渡带宽。 相似文献
4.
本文较详细地分析了用余弦序列对低通数字滤波器的脉冲序列进行调制,获得中心频率可调的带通数字滤波器(或对高通数字滤波器进行调制获得带阻数字滤波器)的设计原理和方法。论证了经这种调制方法获得的带通(或带阻)数字滤波器的低系数量化效应基本不随中心频率而变。 相似文献
5.
6.
7.
8.
牛宝良 《太赫兹科学与电子信息学报》2014,12(5):702-706
无限冲击响应(IIR)数字滤波器设计通常需要先设计S域滤波器,再变换到Z域。为简化IIR数字滤波器的设计过程,本文提出利用单自由度系统(SDOF)模型直接设计IIR数字滤波器的方法,包括低通、带通、高通、带阻等。仿真结果表明设计过程直接、简单,滤波器参数不需要随采样频率而变,具有良好特性,是一种设计IIR数字滤波器的简便易用的新方法。 相似文献
9.
10.
11.
介绍了激光唱机和数字功率放大器等数字音频产品的音频特性及其测量方法,并详细讨论了在测试过程中如何选取和设置带通滤波器、低通滤波器和fs/2带通滤波器。 相似文献
12.
We propose in this paper a tunable second order band-pass filter based on two CMOS current feedback operational amplifiers
(CFOAs). The CFOA includes a novel offset compensation technique. A digital building block is implemented in the proposed
band-pass filter to tune its central frequency. An important feature of the adopted tuning procedure is the ability to tune
the filter without affecting other characteristics such as gain, phase and quality factor. The band-pass filter topology is
validated with a configuration where the central frequency is tuned from 60 MHz to 95 MHz with frequency steps of 5 MHz. Measurements
of the offset-compensated CFOA are promising, and simulation results of the CFOA-based band-pass filter using the 0.18 μ m
CMOS process confirm our theoretical analysis. 相似文献
13.
14.
15.
数字调谐滤波器软件原理研究 总被引:1,自引:1,他引:0
跳频技术中教字调谐滤波器可以改善系统的抗干扰性能。数字调谐滤波器性能不仅由硬件决定,更依赖于内部的软件以及调测过程的软件算法。介绍一种数字调谐滤波器的软件原理,对算法原则进行了阐述,指出结合硬件的软件技术才是数字调谐滤波器的关键技术。 相似文献
16.
17.
Sikka Prateek Asati Abhijit R. Shekhar Chandra 《Wireless Personal Communications》2022,127(3):1869-1878
Wireless Personal Communications - This paper proposes an area, speed and power-optimized band-pass digital signal processing filter targeted for Kintex-7 Field Programmable Gate Array device. The... 相似文献
18.
Eric Lebel Ali Assi Mohamad Sawan 《Analog Integrated Circuits and Signal Processing》2008,54(1):21-29
We propose in this paper a programmable band-pass filter based on an array of fully differential transconductance circuits
that controls the filter parameters. The signal path does not contain any switch, and fine-tuning of the filter parameters
is implemented using programmable capacitors. A digital building block is implemented in the proposed band-pass filter to
tune its central frequency as well as its bandwidth. The filter circuit is based on a biquad topology, which is designed and
implemented with CMOS 0.18 μm technology. Experimental results show a programming ability of the center frequency between
5.9 and 58 MHz, and the quality factor can be tuned from 0.36 to 10. These features are obtained for a total power consumption
of less than 10.5 mW from a single 1.8 V power supply. 相似文献
19.
给出了基于FPGA的IIR数字滤波器的设计和实现方法。首先,用双线性变换法设计出巴特沃兹数字带通滤波器的相关参数;其次,利用Maflab软件对所设计的滤波器进行了仿真分析;最后,利用QuartIlsII软件进行了模块设计和功能仿真。实验结果证明了该方法的有效性。 相似文献