Preparation of antimicrobial sutures by preirradiation grafting of acrylonitrile onto polypropylene monofilament. III. Hydrolysis of the grafted suture

Polypropylene‐grafted‐polyacrylonitrile (PP‐g‐PAN) sutures were prepared by graft polymerization of acrylonitrile onto polypropylene (PP) monofilament using a preirradiation method. The grafted PP monofilaments were subsequently hydrolyzed to introduce carboxyl groups for antimicrobial drug immobilization. The maximum conversion of nitrile groups into carboxyl groups was limited to about 62% and produced sutures with carboxyl content ranging from 0.042 to 0.25 mmol/g. The physical characteristics of sutures were evaluated by FTIR, X‐ray diffraction, differential scanning calorimetry, and X‐ray photoelectron spectroscopy. In general, the hydrolysis did not cause any significant variation in crystalline structure. The mechanical strength was affected in all the grafted sutures. The tensile strength of sutures was investigated as a function of the degree of grafting. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 2509–2516, 2004     

Preparation of antimicrobial sutures by preirradiation grafting of acrylonitrile onto polypropylene monofilament. II. Mechanical,physical, and thermal characteristics

Polypropylene‐g‐polyacrylonitrile sutures were prepared by graft polymerization of acrylonitrile onto polypropylene monofilament by preirradiation method. Sutures with various graft levels were characterized by Fourier Transform Infrared Spectroscopy (FTIR), Density, Birefriengence, X‐ray Diffraction, Scanning Electron Microscopy (SEM), and Differential Scanning Calorimetry (DSC). Mechanical properties of the unmodified and grafted sutures were also evaluated. The physical characteristics of sutures were markedly affected by the graft levels. Density of the polypropylene sutures increased with an increased in the degree of grafting. The heat of fusion and heat of crystallization decreased with the increase in the degree of grafting. X‐ray diffraction also revealed decrease in crystallinity with the increase in the graft levels. Tenacity of the monofilament improved, whereas the elongation at break decreased in grafted samples. Scanning electron microscopy showed significant variation in surface morphology in the grafted samples. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 1224–1229, 2004     

Development of antimicrobial polypropylene sutures by graft copolymerization. II. Evaluation of physical properties,drug release,and antimicrobial activity

Polypropylene (PP) sutures are prepared by the simultaneous radiation grafting of 1‐vinylimidazole (VIm) onto PP monofilament sutures. The tenacity slightly decreases whereas the elongation increases with the increase in the degree of grafting. Thermogravimetric analysis shows that the stability of the sutures is enhanced by the grafting process. The grafted sutures have reasonably good water uptake. They are subsequently immobilized with an antimicrobial drug, ciprofloxacin. The modified suture releases the drug over a period of 4–5 days. The antimicrobial activity of the modified suture is determined against Esherichia coli by the zone of inhibition technique. A clear zone of inhibition is observed around the drug‐containing suture. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3534–3538, 2007     

Graft copolymerization and characterization of 2‐hydroxyethyl methacrylate onto jute fiber by photoirradiation

UV radiation induced graft copolymerization of 2‐hydroxyethyl methacrylate onto natural lignocellulose (jute) fiber was carried out by two methods: simultaneous irradiation and grafting and preirradiation grafting. 1‐Hydroxycyclohexyl‐phenylketone was used as the photoinitiator in both methods. In the former method, the variation of the graft weight was measured for different values of radiation exposure time and the concentrations of both the monomer and photoinitiator. The latter method produced up to 76% graft weight compared to 45% obtained with the former method. The preirradiation method offers better control of the homopolymerization reaction compared to that afforded by the other method. The optimum value of the reaction parameters on the graft weight was evaluated. The mechanical properties of grafted samples were found to be drastically different from those of the as‐received ones and the effect was proportional to the percentage of graft weight. Differential scanning calorimetry studies showed that the percentage of graft add‐on of hydroxyethyl methacrylate with jute had a significant effect on the thermal properties. IR studies indicated the degree of grafting could be estimated by correlating the band intensities with the graft weight. The jute samples grafted with poly(hydroxyethyl methacrylate) at a level of 12% graft weight exhibited a maximum 20% increase in hydrophilicity. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2898–2910, 2006     

Plasma induced graft polymerization of acrylic acid onto polypropylene monofilament

Plasma induced graft polymerization of acrylic acid onto polypropylene (PP) monofilament was carried to introduce carboxyl functionality on its surface. The monofilament was treated with oxygen plasma to create hydroperoxide groups and subsequent graft polymerization was initiated on this exposed monofilament. It was observed that in the absence of an added inhibitor, the grafting did not proceed because of the extensive homopolymerization which left behind hardly any monomer for the grafting reaction. The addition of ferrous sulfate to the grafting medium led to the homopolymer free grafting reaction. The addition of organics, such as methanol, butanone, and acetone led to complete inhibition of the homopolymerization at 60% content. However, the addition of butanone led to much lower degree of grafting than methanol and acetone. The contact angle of the monofilament showed drastic reduction by plasma treatment and by the subsequent grafting of acrylic acid. The grafting in ferrous sulfate medium showed higher contact angles as compared to the grafting in organic medium. The surface morphology was significantly influenced by the nature of the additive in the grafting medium. © 2007 Wiley Periodicals, Inc. JAppl Polym Sci, 2008     

UV‐radiation–induced preirradiation grafting of methyl methacrylate onto lignocellulose fiber in an aqueous medium and characterization

The preirradiation method of grafting has been established by ultraviolet radiation. Methyl methacrylate (MMA) was grafted onto jute fiber in an aqueous medium. The variation of graft weight with UV‐radiation time, monomer concentration, and reaction time was investigated. The conversion of monomer into homopolymer and graft copolymer was evaluated. The graft weight passes through a maximum value (～ 122%) with UV‐radiation time. The optimum value of the monomer concentration was evaluated for maximum degree of grafting. Graft copolymerization of MMA onto lignocellulose fiber significantly increases the elongation at break (～ 65%) compared to that of the “as‐received” sample. However, a linear decrease on breaking load was observed with the increase of graft weight. The estimation of degree of grafting was achieved using an IR technique by correlating band intensities with the degree of grafting. Considering the water‐absorption property, the grafted sample showed a maximum up to 61% decrease in hydrophilicity compared to that of the as‐received sample. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1667–1675, 2004     

Synthesis and characterization of biodegradable polyethylene by graft copolymerization of starch using glucose–Ce(IV) redox system

Graft copolymerization of low‐density polyethylene (LDPE) onto starch was carried out with glucose–cerium(IV) redox initiator in an aqueous sulfuric acid medium under nitrogen atmosphere. The graft yield was influenced by various parameters like reaction time, temperature, and concentrations of acid, glucose, polyethylene (PE), starch, and initiator. A maximum graft yield of 85.66% was obtained at a temperature of 50°C and at higher concentration of starch. Effect of grafting on crystallinity, morphology, and thermal properties of modified PE has been evaluated using X‐ray diffraction, scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA/DTA). Biodegradability of starch‐grafted PE has been tested applying soil‐burial test. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 3229–3239, 2006     

Surface designing of polypropylene by critical monitoring of the grafting conditions

The grafting of acrylic acid onto electron beam‐irradiated polypropylene was carried out using preirradiation method. The stability of peroxy radicals was investigated by electron spin resonance. It was found that the decay of peroxy radicals is much faster at 70°C than at 40°C and ambient temperature. The grafting has been observed to be strongly dependent on the monomer dilution in the reaction medium. The grafting was ascertained by attenuated total reflectance (ATR). The distribution of grafts across the samples was monitored by infrared microscopy. It was found that the graft management is considerably influenced by composition of the grafting medium. The grafting involving pure monomer leads to the surface enrichment with the polyacrylic acid chains. The samples grafted in pure monomer led to much lower contact angles as compared to the diluted monomer solution. The swelling of the grafted samples also showed a trend that was governed by the graft management. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 546–553, 2006     

Synthesis of cassava starch‐g‐poly(methyl methacrylate) copolymers with benzoyl peroxide as an initiator

Graft copolymers of cassava starch and methyl methacrylate (MMA) were synthesized by free‐radical polymerization with benzoyl peroxide (BPO) as an initiator in an aqueous medium at 80°C. The formation of graft copolymers was confirmed by analysis of the obtained products with Fourier transform infrared spectroscopy and scanning electron microscopy. The effects of the amount of cassava starch, the amount of MMA monomer, the amount of BPO, and the reaction time on the grafting characteristics were studied. The optimum condition for grafting were obtained when 5 g of cassava starch, 5 g of MMA, 0.1 g of BPO, and a reaction time of 3 h were used. These condition provided a graft copolymer with 25.00% add‐on, 81.40% monomer conversion, 54.30% homopoly(methyl methacrylate) formed, 45.70% grafting efficiency, 37.20% grafting ratio, and 95.54% yield. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 4083–4089, 2006     

Graft polymerization of acrylic acid onto polypropylene monofilament by RF plasma

Plasma‐induced graft polymerization of acrylic acid onto polypropylene monofilament was carried out to introduce carboxyl groups on its surface. The monofilament was treated with oxygen plasma to create hydroperoxide groups and subsequent graft polymerization of acrylic acid on exposed filament was carried out. An increase in the plasma power led to higher graft levels. It was observed that the hydroperoxide build up on PP surface follows linear increase with the increase in the plasma treatment time only up to 180 s beyond which it slowed down significantly. The formation of oxygenated species was ascertained by X‐ray photoelectron spectroscopy, and the peroxide content was measured by the 2′‐diphenylpicrylhydrazyl (DPPH) estimation. The grafting was observed to be considerably influenced by the plasma exposure time, plasma power, reaction temperature, monomer concentration and the storage temperature. A maximum in the degree of grafting was observed at 40% monomer concentration beyond which grafting tended to decrease very fast. The grafting was also found to be maximum at 50°C followed by a sharp decrease, subsequently. The storage of the exposed filament at ?80°C led to the identical grafting all along the 16 days. However, the storage at 25°C showed significant reduction in the degree of grafting. The atomic force microscopy showed that surface morphology is transformed into a nonhomogeneous one after the plasma exposure, but tends to flatten out after the grafting process in the form of globular structures. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Preparation of an anion‐exchange adsorbent by the radiation‐induced grafting of vinylbenzyltrimethylammonium chloride onto cotton cellulose and its application for protein adsorption

Poly(vinylbenzyltrimethylammonium chloride)‐graft‐cotton cellulose, an anion‐exchange matrix, was synthesized by a mutual radiation‐induced grafting technique with a ⁶⁰Co γ‐radiation source. The grafted matrix was characterized by grafting yield estimation, elemental analysis, Fourier transform infrared spectroscopy, and scanning electron microscopy. The grafting yield decreased with the increase in the dose rate. However, the grafting yield and nitrogen content of grafted samples increased almost linearly with an increase in the total irradiation dose. To evaluate the performance of the grafted anion‐exchange matrix, the protein adsorption and elution behavior were investigated in a continuous column process under various experimental conditions, with bovine serum albumin used as a model protein. The binding and elution behavior of the anion‐exchange matrix depended on different experimental parameters, such as the grafting yield, ionic strength, pH of the medium, and amount of protein loaded. From a breakthrough curve, the equilibrium binding capacity and elution percentage of the grafted anion‐exchange matrix were estimated to be 40 mg/g and 94%, respectively. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 5512–5521, 2006     

A modified model and algorithm for flow‐enhanced crystallization—Application to fiber spinning

The graft copolymerization of acrylamide (AAm) monomer onto polyethylene‐coated polypropylene (PE‐co‐PP) nonwoven fabric was carried out by the mutual irradiation method. The general peculiarities of the grafting have been studied by gravimetric, scanning electron microscope (SEM), mechanical properties, and Fourier transform infrared (FTIR) methods. The influence of absorbed dose, dose rate, as well as the monomer concentration on the degree of grafting has been determined. Metal ions uptake of Cu²⁺, Co²⁺, Ni²⁺ by the grafted fabrics was evaluated. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3240–3245, 2006     

UV‐radiation induced graft copolymerization of methyl methacrylate onto sodium salt of partially carboxymethylated psyllium

UV‐radiation induced grafting of methyl methacrylate onto sodium salt of partially carboxymethylated psyllium has been carried out using ceric ammonium nitrate as a photoinitiator in an aqueous medium. The reaction variables including concentrations of initiator, nitric acid, monomer, and amount of the backbone as well as time and temperature have been varied for establishing the optimized reaction conditions for grafting. The influence of these reaction conditions on the grafting yields has been discussed. The overall activation energy of grafting has been calculated. The infrared spectroscopic, thermogravimetric analysis, and scanning electron microscopic techniques have been used for the characterization of graft copolymers. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Radiation‐modified copolymer for the extraction of metal ions from water

The modification of heavy‐duty polyethylene films was carried out through the graft copolymerization of acrylamide and vinyl acetate mixtures of different compositions with the simultaneous radiation method. The influence of the synthesis conditions (the irradiation dose, comonomer composition, and dilution) on the degree of grafting was investigated. The grafted samples were characterized with Fourier transform infrared spectroscopy, scanning electron microscopy, and differential scanning calorimetry. The effect of the grafting degree on the thermal stability of the modified polymer was examined. The extraction of heavy and toxic metals such as cadmium, cobalt, copper, nickel, and lead by the modified heavy‐duty polyethylene was evaluated, and the metal‐ion uptake by the grafted and chemically treated samples seemed better than that of the grafted and untreated ones. Both the rate and amount of the metal‐ion uptake were affected by the temperature of the feed solution and the grafting degree. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Graft copolymerization of methyl acrylate onto poly(vinyl alcohol) initiated by potassium diperiodatoargentate(III)

The graft copolymerization of methyl acrylate onto poly(vinyl alcohol) (PVA) using potassium diperiodatoargentate(III) [Ag(III)]–PVA redox system as initiator was studied in an alkaline medium. Some structural features and properties of the graft copolymer were confirmed by Fourier‐transfer infrared spectroscopy, scanning electron microscope, X‐ray diffraction and thermogravimetric analysis. The grafting parameters were determined as a function of concentrations of monomer, initiator, macromolecular backbone (X?_n = 1750, M? = 80 000 g mol^?1), reaction temperature and reaction time. A mechanism based on two single‐electron transfer steps is proposed to explain the formation of radicals and the initiation profile. Other acrylate monomers, such as methyl methacrylate, ethyl acrylate and n‐butyl acrylate, were also used to produce graft copolymerizations. It has been confirmed that grafting occurred to some degree. Thermogravimetric analysis was performed in a study of the moisture resistance of the graft copolymer. Copyright © 2004 Society of Chemical Industry     

Graft copolymerization of p‐acryloyloxybenzoic acid and p‐methacryloyloxybenzoic acid onto isotactic polypropylene and their thermal properties: Part I

The polymerization and grafting of the monomers p‐acryloyloxybenzoic acid and p‐methacryloyloxybenzoic acid were studied. Poly(acryloyloxybenzoic acid) was obtained by γ‐radiation‐induced solution polymerization and bulk melt polymerization initiated by dicumyl peroxide. Poly(methacryloyloxybenzoic acid) could be obtained only by bulk melt polymerization. The graft copolymerization of the monomers onto isotactic polypropylene was carried out in bulk. The maximum grafting was reached in shorter times at higher temperatures, and it also increased with the concentration of the monomers in the reaction medium. The thermal and crystallization behavior of the graft copolymers was studied with differential scanning calorimetry and wide‐angle X‐ray diffraction. The graft copolymerization of p‐acryloyloxybenzoic acid did not have any influence on the formation of both α forms (monoclinic) of polypropylene, whereas p‐methacryloyloxybenzoic acid led to the α₂ form. The β‐crystalline modification (hexagonal) formed in poly(acryloyloxybenzoic acid)‐g‐polypropylene products at 185°C and at higher grafting temperatures and also in the second run of differential scanning calorimetry studies after fast cooling. The β form was not observed in graft copolymers of poly(methacryloyloxybenzoic acid). © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis,characterization, and biodegradation of carboxymethylchitosan‐g‐medium chain length polyhydroxyalkanoates

Grafting of medium chain length polyhydroxyalkanoates (mcl‐PHA) produced by Comamonas testosteroni onto carboxymethylchitosan (CMCH) using ceric ammonium nitrate (CAN) as an initiator was carried out under nitrogen atmosphere in aqueous medium. The grafting composition was 2 g CMCH, 0.2M CAN, and 0.5 g mcl‐PHA. The reaction was carried out at 40°C ± 1°C for 4.5 h, and reaction product was extracted by acetone precipitation. The CMCH‐g‐mcl‐PHA copolymers were characterized by Fourier transform infrared spectroscopy, Thermogravimetric analysis, differential scanning calorimetry, and scanning electron microscopy. The data obtained showed successful grafting of mcl‐PHA onto CMCH polymer. TGA results indicated that the graft was stable up to 380°C, and the solubility studies revealed a high % grafting efficiency. Biodegradation studies of the graft in terms of microbial growth, extracellular protein concentration, and % weight loss in the graft were carried out for 30 days using a bacterial isolate Burkholderia cepacia 202 and a fungal isolate Aspergillus fumigatus 202. 93% weight loss of the graft was obtained in case of A. fumigatus 202, whereas B. cepacia 202 showed 76% loss in weight of the graft. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Graft copolymerization of methacrylic acid onto guar gum,using potassium persulfate as an initiator

Graft copolymerization of methacrylic acid (MAA) onto guar gum (GG) was carried out by free radical initiation mechanism by using potassium persulfate (PPS) as an initiator. It was found that % grafting, grafting efficiency, and % conversion were all dependent on the concentration of PPS, MAA, reaction temperature, and reaction time. Using PPS, the maximum % grafting was ascertained to be 241 at the optimum conditions of 60°C reaction temperature, 3 h of reaction time, 1.1 mmol of PPS, and 0.058 mol of MAA. Plausible mechanism for grafting reaction was suggested. The graft copolymer formed was characterized by Fourier transform infrared and differential scanning calorimetry. The graft copolymer formed could find applications in drug delivery. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 618–623, 2006     

Synthesis and characterization of dextrin‐grafted polypropylene

We carried out the graft copolymerization of the water‐soluble natural polymer dextrin onto preirradiated polypropylene (PP) in an aqueous medium using benzoyl peroxide (BPO) as the radical initiator. PP was irradiated by γ rays from a Co⁶⁰ source at a constant dose rate of 3.40 kGy/h to introduce hydroperoxide linkages, which served as the sites for grafting. The graft copolymerization was studied as a function of different reaction parameters, and the maximum percentage grafting (P_g; 55%) of dextrin onto PP was obtained at optimum conditions of [BPO] = 5.165 × 10⁻² mol/L, temperature = 60°C in 120 min with 15 mL of water. Different grafting parameters, such as the percentage apparent grafting, percentage grafting, and percentage true grafting have been evaluated. The graft copolymers were characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis, and scanning electron microscopy. Swelling studies were carried out in pure, binary, ternary, and quaternary solvent systems composed of water, ethanol (EtOH), dimethyl sulfoxide (DMSO), and N,N‐dimethylformamide (DMF) at different ratios. The maximum swelling percentage PP‐g‐dextrin (both composite and true graft) was observed in pure DMSO and DMF followed by EtOH and water. Water‐retention studies of PP and PP‐g‐dextrin (both composite and true graft) were investigated at different time periods, temperatures, and pH values. The maximum percentage water retention of PP‐g‐dextrin (composite, 124%) was observed at 8 h and 50°C in a neutral medium (pH 7). © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis and characterization of butyl acrylate graft sodium salt of partially carboxymethylated starch

Graft copolymers were synthesized by graft copolymerization of butyl acrylate (BA) onto sodium salt of partially carboxymethylated starch (Na‐PCMS). Ceric ammonium nitrate (CAN), a redox initiator, was used for initiation of graft copolymerization reaction. All the experiments were run with Na‐PCMS having degree of substitution, DS = 0.35. The grafting reaction was characterized by parameters such as % total conversion (%Ct), % grafting (%G), % grafting efficiency (%GE), and % add‐on. Graft copolymers were characterized by infrared spectral analysis and scanning electron microscopy. Variables affecting graft copolymerization reaction such as nitric acid concentration, reaction time, reaction temperature, and ceric ion concentration were investigated. The results revealed that 0.3M CAN as initiator, 0.3M HNO₃, with reaction time 4–4.5 h at 25–30°C were found as suitable parameters for maximum yield of graft copolymerization reaction. © 2006 Wiley Periodicals, Inc. JAppl Polym Sci 102: 3334–3340, 2006