Thermal stabilization of poly(3‐hydroxybutyrate) by poly(glycidyl methacrylate)

Poly(3‐hydroxybutyrate) (PHB)/poly(glycidyl methacrylate) (PGMA) blends with the PGMA content up to 30 wt % were prepared by a solution‐precipitation procedure. The thermal decomposition of PHB/PGMA blends was studied by thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and differential thermal analysis (DTA). The thermograms of PHB/PGMA blends contained a two‐step degradation process, while that of pure PHB sample exhibited only one‐step degradation process. This degradation behavior of PHB/PGMA blends, which have a higher thermal stability as measured by maximum decomposition temperature or residual weight after isothermal degradation for 1 h, is probably due to crosslinking reactions of the epoxide groups in the PGMA component with the carboxyl chain ends of PHB fragments during the degradation process, and the occurrence of such reactions can be assigned to the exothermic peaks in their DTA thermograms. An isothermal study of these blends at 200–250°C for 1 h indicated that the residual weight was directly correlated with the amount of epoxide groups in the PHB/PGMA blends. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2945–2952, 2002; DOI 10.1002/app.10318     

Hydrogen bonding,miscibility, crystallization,and thermal stability in blends of biodegradable polyhydroxyalkanoates and polar small molecules of 4‐tert‐butylphenol

The hydrogen bonding, miscibility, crystallization, and thermal stability of poly(3‐hydroxybutyrate) (PHB)/4‐tert‐butylphenol (BOH) blends and poly(3‐hydroxybutyrate‐co‐3‐hydroxyhexanoate) [P(3HB‐3HHx)]/BOH blends were investigated by Fourier transform infrared (FTIR) spectroscopy, solid‐state¹³C‐NMR, differential scanning calorimetry, wide‐angle X‐ray diffraction (WAXD), and thermogravimetric analysis. The results of FTIR spectroscopy and solid‐state¹³C‐NMR show that intermolecular hydrogen bonds existed between the two components in the blends and that the interaction was caused by the carbonyl groups in the amorphous phase of both polyesters and the hydroxyl groups of BOH. With increasing BOH content, the chain mobility of both the PHB and P(3HB‐3HHx) components was improved. After the samples were quenched, the detected single glass‐transition temperatures decreased with composition, indicating that both PHB/BOH and P(3HB‐3HHx)/BOH were miscible blends in the melt. Moreover, as BOH content increased, the melting temperatures of PHB and P(3HB‐3HHx) clearly decreased, which implied that their crystallization was suppressed by the addition of BOH. Although the crystallinity of PHB and P(3HB‐3HHx) components decreased with increasing BOH content in the blends, their crystal structures were hardly affected after they were blended with BOH, which was further proven by WAXD results. In addition, the thermal stability of PHB was improved by a smaller amount of BOH.     

Polyhydroxybutyrate/acrylonitrile‐g‐(ethylene‐co‐ propylene‐co‐diene)‐g‐styrene blends: Their morphology and thermal and mechanical behavior

Polyhydroxybutyrate (PHB) is a biodegradable bacterial polyester emerging as a viable substitute for synthetic, semicrystalline, nonbiodegradable polymers. An elastomer terpolymer of acrylonitrile‐g‐(ethylene‐co‐propylene‐co‐diene)‐g‐styrene (AES) was blended with PHB in a batch mixer and in a twin‐screw extruder to improve the mechanical properties of PHB. The blends were characterized with differential scanning calorimetry, dynamic mechanical analysis, scanning electron microscopy, and impact resistance measurements. Despite the narrow processing window of PHB, blends with AES could be prepared via the melting of the mixture without significant degradation of PHB. The blends were immiscible and composed of four phases: poly(ethylene‐co‐propylene‐co‐diene), poly(styrene‐co‐acrylonitrile), amorphous PHB, and crystalline PHB. The crystallization of PHB in the blends was influenced by the AES content in different ways, depending on the processing conditions. A blend containing 30 wt % AES presented impact resistance comparable to that of high‐impact polystyrene, and the value was about 190% higher than that of pure PHB. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Thermal properties and non‐isothermal crystallization behavior of biodegradable poly(p‐dioxanone)/poly(vinyl alcohol) blends

Blends of two biodegradable semicrystalline polymers, poly(p‐dioxanone) (PPDO) and poly(vinyl alcohol) (PVA) were prepared with different compositions. The thermal stability, phase morphology and thermal behavior of the blends were studied by using thermogravimetric analysis (TGA), scanning electron microscopy (SEM) and differential scanning calorimetry (DSC). From the TGA data, it can be seen that the addition of PVA improves the thermal stability of PPDO. DSC analysis showed that the glass transition temperature (T_g) and the melting temperature (T_m) of PPDO in the blends were nearly constant and equal to the values for neat PPDO, thus suggesting that PPDO and PVA are immiscible. It was found from the SEM images that the blends were phase‐separated, which was consistent with the DSC results. Additionally, non‐isothermal crystallization under controlled cooling rates was explored, and the Ozawa theory was employed to describe the non‐isothermal crystallization kinetics. Copyright © 2006 Society of Chemical Industry     

Control of biodegradability of poly(3‐hydroxybutyric acid) film with grafting acrylic acid and thermal remolding

Radiation‐induced graft polymerization of acrylic acid (AAc) on poly(3‐hydroxybutyric acid) (PHB) film was carried out and the resulting film was thermally‐remolded. The PHB films grafted with AAc (PHB‐g‐AAc) having a degree of grafting higher than 5% completely lost the enzymatic degradability. The enzymatic degradability of the grafted film was recovered by thermal remolding. The highest enzymatic degradation rate was observed at degree of grafting of 10% after thermal remolding. The PHB‐g‐AAc films and thermally‐remolded PHB‐g‐AAc films were characterized by contact angle and differential scanning calorimetry. The enzymatic degradability of PHB‐g‐AAc films was lost by the grafted AAc, which covered the surface of PHB film. The acceleration of enzymatic degradation in the remolded PHB‐g‐AAc films was mainly caused by decrease of crystallinity of PHB by dispread of grafted AAc during thermal remolding. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3856–3861, 2006     

Development of novel biopolymer blends based on poly(l‐lactic acid), poly((R)‐3‐hydroxybutyrate), and plasticizer

Poly(l ‐lactic acid) (PLLA), a biopolymer that can be derived from renewable resources, is known for its brittleness as a result of slow crystallization rates under supercooling conditions, which is associated with the formation of large spherulites. In addition, the glass transition temperature (T_g) of PLLA is 60°C, such that the polymer chain is immobile at room temperature. These disadvantages make PLLA unsuitable for use in the food packaging sector. In this research, biopolymer blends based on PLLA and poly((R)‐3‐hydroxybutyrate) (PHB), together with tributyl citrate (TBC) as a plasticizer, were developed. TBC was added to increase polymer chain mobility, and to decrease PLLA T_g from 60 to 10°C in blends. Furthermore, the addition of PHB as a nucleating agent to PLLA resulted in an increased proportion of smaller spherulites. Fourier‐transform infrared (FT‐IR) spectroscopy indicated that the carbonyl group and several other characteristic peaks in blends are shifted to lower wavenumber. In addition, polarized optical microscopy experiments confirmed the results of differential scanning calorimetry, FT‐IR, and wide‐angle X‐ray diffraction, showing that PHB enhances the crystallization behavior by acting as a bionucleation. POLYM. ENG. SCI., 54:1394–1402, 2014. © 2013 Society of Plastics Engineers     

Preparation and characterization of biodegradable polymer blends from poly(3‐hydroxybutyrate)/poly(vinyl acetate)‐modified corn starch

Biodegradable polymer blends prepared by blending poly(3‐hydroxybutyrate) (PHB) and corn starch do not form intact films due to their incompatibility and brittle behavior. For improving their compatibility and flexibility, poly(vinyl acetate) (PVAc) was grafted from the corn starch to prepare the PVAc‐modified corn starch (CSV). The resulting CSV consisted of 47.2 wt% starch‐g‐PVAc copolymer and 52.8 wt% PVAc homopolymer and its structure was verified by FT‐IR analysis. In comparison with 35°C of the neat PVAc, the glass transition temperature (T_g) of the grafted PVAc chains on starch‐g‐PVAc was higher at 44°C because of the hindered molecular mobility imposed from starch on the grafted PVAc. After blending PHB with the CSV, structure and thermal properties of the blends were investigated. Only a single T_g was found for all the PHB/CSV blends and increased with increasing the CSV content. The T_g‐composition dependence of the PHB/CSV blends was well‐fitted with the Gordon‐Taylor equation, indicating that the CSV was compatible with the PHB. In addition, the presence of the CSV could raise the thermal stability of the PHB component. It was also found that the presence of the PHB and PVAc components would not hinder the enzymatic degradation of the corn starch by α‐amylase. POLYM. ENG. SCI., 55:1321–1329, 2015. © 2015 Society of Plastics Engineers     

Effect of thermal aging on the biodegradation of PCL,PHB‐V,and their blends with starch in soil compost

Different proportions of starch were blended with poly(β‐hydroxybutyrate)‐co‐poly(β‐hydroxyvalerate) (PHB‐V) or poly(ε‐caprolactone) (PCL) by extrusion, and the mechanical (maximum tensile strength, elongation at break and Young's modulus) and thermal properties (by differential scanning calorimetry) were determined. The biodegradability of the blends in soil compost was also assessed after thermal aging for 192, 425, and 600 h at different temperatures. The maximum tensile strength of the PCL50 blend (containing 50% starch) was 35% lower than that of PCL and that of the PHB‐V50 blend was 60% lower than that of PHB‐V without thermal aging. PHB‐V blends were more biodegradable than PCL blends. For the blends prepared, only the biodegradation of PHB‐V25 was affected by thermal aging. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3539–3546, 2003     

Blends of poly(3‐hydroxybutyrate) with poly(β‐alanine) and its derivatives

Nanofibers and films of poly(3‐hydroxybutyrate) (PHB)/nylon 3 [poly(β‐alanine) (N3)], PHB/poly(α‐methyl‐β‐alanine) (2mN3), and PHB/poly(β‐methyl‐β‐alanine) (3mN3) blends were prepared by electrospinning and film‐casting techniques, respectively. The miscibility of the blends was studied by Fourier transform infrared spectrometry, differential scanning calorimetry, thermogravimetric analysis, and X‐ray diffraction (XRD). The electrospinnability of the blends was studied by scanning electron microscopy. Some characteristic IR absorption bands of the components in the blends shifted gradually with changes in the compositions. The melting temperature and decomposition temperature of PHB decreased gradually with increasing fractions of N3, 2mN3, and 3mN3. The XRD spectra of all of the blends exhibited peaks with lower intensities compared to those of the neat species. The suppression of PHB crystallinity in the blends after blending was attributed to the disruption of its crystal lattice and the prevention of recrystallization of each component by means of other components and segmental interactions between the components in the amorphous phase. Thermal, spectroscopic, and optical analyses of the polymer blends revealed that the polymers were miscible with good compatibility, and this could have improved the scaffold properties of PHB. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40484.     

Thermal and crystallinity property studies of poly (L‐lactic acid) blended with oligomers of 3‐hydroxybutyrate or dendrimers of hydroxyalkanoic acids

Poly (L ‐lactic acid) (PLA) is a biodegradable polymer with slow crystallization rate. Oligomers of 3‐hydroxybutyrate (OHB) and dendrimers of hydroxyalkanoic acids with different molecular weights were blended with PLA in a hope to improve the crystallization ability and thermal stability of PLA, respectively. Four thermally‐degraded PHB products oligomers termed OHB‐1, OHB‐2, OHB‐3, and OHB‐4 with various number average molecular weights (M_n) of 4000, 7400, 14,000, and 83,000, respectively, were blended with PLA. The lower cold‐crystallization temperature (T_cc) and higher heat of cold crystallization (ΔH_cc) for blend of PLA/OHB‐1 suggested that thermally‐degraded OHB‐1 formed suitable crystal size during the cooling process and then acted as nucleation agents for PLA in the subsequent heating process. On the other hand, for the blending systems of PLA/dendrimers of hydroxyalkanoic acids, no obvious change on the thermal properties was observed compared with pure PLA except an improved PLA thermal stability possibly resulted from the crosslinking effects of the dendrimers © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

The synthesis of poly(3‐hydroxybutyrate)‐g‐poly(methylmethacrylate) brush type graft copolymers by atom transfer radical polymerization method

Brush type of poly (3‐hydroxy butyrate), PHB, copolymer synthesis has been reported. Natural PHB was chlorinated by passing chlorine gas through PHB solution in CHCl₃/CCl₄ mixture (75/25 v/v) to prepare chlorinated PHB, PHB‐Cl, with the chlorine contents varying between 2.18 and 39.8 wt %. Toluene solution of PHB‐Cl was used in the atom transfer radical polymerization (ATRP) of methyl methacrylate, MMA, in the presence of cuprous bromide (CuBr)/2,2′‐bipyridine complex as catalyst, at 90°C. This “grafting from” technique led to obtain poly (3‐hydroxybutyrate)‐g‐poly(methylmethacrylate) (PHB‐g‐PMMA) brush type graft copolymers (cylindrical brush). The polymer brushes were fractionated by fractional precipitation methods and the γ values calculated from the ratio of the volume of nonsolvent to volume of solvent of brushes were ranged between 2.8 and 9.5 depending on the molecular weight, grafting density, and side chain length of the brushes, while the γ values of PHB, PHB‐Cl, and homo‐PMMA were 2.7–3.8, 0.3–2.4, and 3.0–3.9, respectively. The fractionated brushes were characterized by gel permeation chromatography, ¹H‐NMR spectrometry, thermogravimetric analysis (TGA), and differential scanning calorimetry techniques. PHB‐g‐PMMA brush type graft copolymers showed narrower molecular weight distribution (mostly in range between 1.3 and 2.2) than the PHB‐Cl macroinitiator (1.6–3.5). PHB contents in the brushes were calculated from their TGA thermograms and found to be in range between 22 and 42 mol %. The morphologies of PHB‐g‐PMMA brushes were also studied by scanning electron microscopy. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Weak interaction,marginal miscibility,and ring‐band spherulites in blends of poly(vinylidene fluoride) with polyesters

Fourier transform infrared (FTIR) spectroscopy, optical microscopy (OM), and differential scanning calorimetry (DSC) techniques were used to probe phase behavior and interactions in blends of poly(vinylidene fluoride) (PVDF) and polyesters [poly(trimethylene adipate) (PTA) and poly(pentamethylene adipate) (PPA)] of relatively low crystallizability. DSC thermal analysis and OM characterization proved that PVDF was miscible with PTA and PPA with a low lower critical solution temperature. Small negative values of the interaction parameters (χ₁₂ = ?0.13 for a PVDF/PPA blend) were obtained with the melting‐point depression method. FTIR spectroscopy results revealed that interactions between ? CF₂ of PVDF and the ? C?O group of the polyester were weak, in agreement with the thermal analysis results. An increase in the coarseness and/or ring‐band spacing further provided supportive evidence that miscibility did exist between the polyester and PVDF constituents in the blends. Pattern changes in ring‐band spherulites of the miscible blends further substantiated the favorable, though weak, interactions between the PVDF and polyester constituents. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Preparation of cellulose acetate butyrate and poly(ethylene glycol) copolymer to blend with poly(3‐hydroxybutyrate)

A two‐step procedure was used to synthesize the cellulose acetate butyrate and poly(ethylene glycol) graft copolymer (CAB‐g‐PEG). By choosing the appropriate composition, the crosslinked graft copolymer or not could be obtained. Then, the CAB‐g‐PEG copolymer was blended with poly(3‐hydroxybutyrate) (PHB), to further improve the mechanical properties of PHB. The results indicated that PHB and CAB‐g‐PEG that were not crosslinked were miscible over the entire composition range. As the CAB‐g‐PEG copolymer increased in the PHB/CAB‐g‐PEG blends, the melting temperature of the blends decreased, the crystallization of PHB became more difficult, and the crystallinity of the blend and PHB phase all decreased. The tensile properties and impact strength of the PHB/CAB‐g‐PEG blends were superior to the PHB/CAB blends. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1471–1478, 2006     

The kinetics of the thermal decomposition of poly(3‐hydroxybutyrate) and maleated poly(3‐hydroxybutyrate)

The thermal decomposition mechanism of maleated poly(3‐hydroxybutyrate) (PHB) was investigated by FTIR and ¹H NMR. The results of experiments showed that the random chain scission of maleated PHB obeyed the six‐membered ring ester decomposition process. The thermal decomposition behavior of PHB and maleated PHB with different graft degree were studied by thermogravimetry (TGA) using various heating‐up rates. The thermal stability of maleated PHB was evidently better than that of PHB. With increase in graft degree, the thermal decomposition temperature of maleated PHB gradually increased and then declined. Activation energy E_a as a kinetic parameter of thermal decomposition was estimated by the Flynn‐Wall‐Ozawa and Kissinger methods, respectively. It could be seen that approximately equal values of activation energy were obtained by both methods. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1789–1796, 2002; DOI 10.1002/app.10463     

Miscibility study on blend of thermotropic liquid crystalline polymers and polyester

The miscibility of thermotropic liquid crystalline polymers (TLCPs) and polyester blends was investigated with thermal and morphological analyses, as well as transesterification. TLCPs composed of 80 mol % para‐hydroxybenzoate (PHB) and 20 mol % poly(ethylene terephthalate) (PET) or 60 mol % PHB and 40 mol % PET, and polyesters such as PET and poly(ethylene 2,6‐naphthalate) (PEN) were melt blended in an internal mixer. DSC analyses were performed to investigate the thermal transition behavior and to obtain thermodynamic parameters. All the blends showed only a single glass‐transition temperature, which means they are partially miscible in the molten state. The Flory–Huggins interaction parameter was calculated employing the Nishi–Wang approach, and negative values were obtained except for the P(HB8‐ET2)/PEN blends. Transesterification was investigated using ¹H‐NMR, and the change of chemical shift compared to pure PET or P(HB‐ET)s was observed in the P(HB‐ET)/PET blends. An intermediate chemical shift value (4.83 ppm) was observed in the P(HB6‐ET4)/PEN blends, which indicates transesterification occurred. The fractured surface morphology of scanning electron micrographs showed that the interfaces between the LC droplets and matrix were not distinct. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1842–1851, 2003     

Use of poly(3‐hydroxybutyrate)/niobium oxyhydroxide nanocomposites in photocatalysis: Effect of preparation methods

In this work, nanocomposites were obtained by the dispersion of niobium oxyhydroxide into a poly(3‐hydroxybutyrate) (PHB) matrix by different preparative methods. These methods led to changes in the polymer morphology and in their photocatalytic properties. Thermal and structural properties of the nanocomposites were investigated using thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and Fourier transform infrared spectroscopy (FTIR)–attenuated total reflection (ATR). Scanning electron microscopy images were analyzed in order to observe the different morphologies of nanocomposites as well as the distribution of niobium nanoparticles in the PHB matrix. The chemical interactions between the polymer and niobium nanoparticles were observed in the FTIR–ATR and thermal analyses. The results of TGA and DSC indicated an improvement in the thermal stability of the polymer and the action of inorganic nanoparticles as nucleating agents in the process of heterogeneous nucleation of PHB. The composites exhibited good catalytic activity for the removal of methylene blue dye from an aqueous medium (～90%) during a photocatalytic process. The different morphologies of PHB/niobium oxyhydroxide composites directly influenced the catalytic activity of the material due to the difference in the dispersion of nanoparticles. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45836.     

Compatibilization of cellulose acetate/poly(3‐hydroxybutyrate) blends by grafting copolymer

Blends of cellulose acetate (CA) and poly(3‐hydroxybutyrate) (PHB) were prepared by the solvent‐casting method in both the presence and the absence of a compatibilizer agent. The compatibilizer was synthesized by reactive processing between CA and PHB. From the differential scanning calorimetric analysis, it has been identified that CA/PHB blends are immiscible in the range of PHB content studied. The existence of interactions between the components was observed due to the displacement of glass transition temperature relative to PHB phase in the blend. The grafting copolymer promoted the increase of interactions between the phases specifically to compatibilized CA/40%wtPHB blend. This composition shows significant changes in crystalline percentage compared to the uncompatibilized blend. The existence of phase interactions modified the viscoelastic behavior of the compatibilized blends by introducing changes in the chain segment mobility due to the addition of compatibilizer as the dynamic mechanical analysis has pointed out. It was observed that different of the blends with lower PHB content, CA/40%wtPHB compatibilized blend with same compatibilizer content did not reach PHB saturation. This difference in behavior can be attributed to the fact that the content of compatibilizer agent used was the proper amount to promote both PHB domain size reduction and dispersion. POLYM. ENG. SCI., 56:689–696, 2016. © 2016 Society of Plastics Engineers     

Crystallization of poly(3‐hydroxybutyrate) with stereocomplexed polylactide as biodegradable nucleation agent

Crystallization kinetics behavior and morphology of poly(3‐hydroxybutyrate) (PHB) blended with of 2–10 wt% loadings of poly(L ‐ and D ‐lactic acid) (PLLA and PDLA) stereocomplex crystallites, as biodegradable nucleating agents, were studied using differential scanning calorimetry, polarizing‐light optical microscopy (POM), and wide‐angle X‐ray diffraction (WAXD). Blending PLLA with PDLA at 1:1 weight ratio led to formation of stereocomplexed PLA (sc‐PLA), which was incorporated as small crystalline nuclei into PHB for investigating melt‐crystallization kinetics. The Avrami equation was used to analyze the isothermal crystallization of PHB. The stereocomplexed crystallites acted as nucleation sites in blends and accelerated the crystallization rates of PHB by increasing the crystallization rate constant k and decreasing the half‐time (t_1/2). The PHB crystallization was nucleated most effectively with 10 wt% stereocomplexed crystallites, as evidenced byPOM results. The sc‐PLA complexes (nucleated PHB crystals) exhibit much small spherulite sizes but possess the same crystal cell morphology as that of neat PHB based on the WAXD result. POLYM. ENG. SCI., 2012. © 2012 Society of Plastics Engineers     

Effect of two different plasticizers on the properties of poly(3‐hydroxybutyrate) binary and ternary blends

Plasticized poly(3‐hydroxybutyrate) (PHB) films were obtained by solvent casting. The effects of two different additives on several properties of PHB have been examined, utilizing tributyrin and poly[di(ethyleneglycol) adipate] (A). Based on changes in the glass transition temperature (T_g) and cold crystallization temperature of host PHB, the two components are miscible with PHB and they can act as plasticizers. Binary and ternary blends were obtained by adding both plasticizers separately or together, respectively. The effect of plasticizer addition on the optical transparency, water vapor permeability, and tensile properties of the films was studied. It was found that the blends remain transparent and water vapor permeability was maintained constant until a 20 wt % of plasticizer content. Plasticizing effect was corroborated and it depended on the plasticizer percentage. Binary blends had an increased plasticity, in concordance with T_g diminution of PHB. Although ternary blends presented T_g diminution, mechanical properties were not improved probaby due to strong interactions between plasticizers. Finally, binary and ternary blends presented enhanced properties, causing an increment on processability. A correct knowledge between the formulation of the film and the role played by each component could allow getting custom films. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46016.     

Thermal evaluation of PHB/PP‐g‐MA blends and PHB/PP‐g‐MA/vermiculite bionanocomposites after biodegradation test

This study aimed to evaluate the thermal behavior of polyhydroxybutyrate (PHB)/polypropylene grafted with maleic anhydride (PP‐g‐MA) blends and PHB/PP‐g‐MA/vermiculite bionanocomposites submitted to the biodegradation test according to ASTM G 160‐03. The blends and bionanocomposites were prepared by melt intercalation method using a single screw extruder, and then, compression molded. The thermal analyzes were performed by thermogravimetry (TG) and differential scanning calorimetry. It was verified the decrease of onset degradation temperature and the melting temperature mainly after 86 days of exposure to the simulated soil. This behavior was more pronounced in bionanocomposites because of interactions between the maleic anhydride groups and the clay favoring biodegradation, making the systems more amorphous and propitious to the attack of microorganisms. POLYM. ENG. SCI., 56:555–560, 2016. © 2016 Society of Plastics Engineers