Synthesis and antitumor activity of poly(3,4‐dihydro‐2H‐pyran‐co‐maleic anhydride‐co‐vinyl acetate)

The radical‐initiated terpolymerization of 3,4‐dihydro‐2H‐pyran (DHP), maleic anhydride (MA), and vinyl acetate (VA), which were used as a donor–acceptor–donor system, was carried out in methyl ethyl ketone in the presence of 2,2′‐azobisisobutyronitrile as an initiator at 65°C in a nitrogen atmosphere. The synthesis and characterization of binary and ternary copolymers, some kinetic parameters of terpolymerization, the terpolymer‐composition/thermal‐behavior relationship, and the antitumor activity of the synthesized polymers were examined. The polymerization of the DHP–MA–VA monomer system predominantly proceeded by the alternating terpolymerization mechanism. The in vitro cytotoxicities of poly(3,4‐dihydro‐2H‐pyran‐alt‐maleic anhydride) [poly(DHP‐alt‐MA)] and poly(3,4‐dihydro‐2H‐pyran‐co‐maleic anhydride‐co‐vinyl acetate) [poly(DHP‐co‐MA‐co‐VA)] were evaluated with Raji cells (human Burkitt lymphoma cell line). The antitumor activity of the prepared anion‐active poly(DHP‐alt‐MA) and poly(DHP‐co‐MA‐co‐VA) polymers were studied with methyl–thiazol–tetrazolium testing, and the 50% cytotoxic dose was calculated. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 2352–2359, 2005     

Antimicrobial properties of bio‐inspired poly(4‐vinyl‐2‐pyridone) and its N‐alkylated cationic derivatives

Developing new antimicrobial polymers and designing new antimicrobial materials are important research areas for overcoming bacterial resistance. In the present study a new polymer, poly(4‐vinyl‐2‐pyridone), having bioactive structure analogous to that of naturally occurring heterocyclic compounds, was synthesized from 4‐vinylpyridine following a simple protocol. To augment the antibacterial properties of the synthesized polymer, N ‐alkylation of the heterocyclic pyridone moieties was achieved with ethylene chlorohydrin (2‐chloroethanol) to generate choline analogous structure. Also, its N ‐butylated analogue was synthesized as a reference compound to study structure–activity relationship. Structures of the polymers were confirmed using various characterization techniques. Antimicrobial efficacy of the polymers was determined using the minimum inhibitory concentration method in parallel experiments. The test microorganisms used were a Gram (+) bacterium (Staphylococcus epidermidis ), Gram (?) bacteria (Salmonella typhi , Pseudomonas aeruginosa and Escherichia coli ) and a fungus (Candida albicans ). Both the polymer derivatives are far more effective antimicrobial agents than the pristine polymer. Trends in the antimicrobial efficacy of these polymers correlate with their zeta potential values. © 2016 Society of Chemical Industry     

Rheology of poly(N‐vinyl pyrrolidone)–poly(ethylene glycol) adhesive blends under shear flow

The rheological properties of adhesive miscible blends of high‐molecular‐weight poly(N‐vinyl pyrrolidone) (PVP) with short‐chain poly(ethylene glycol) (PEG) under oscillatory and steady‐state shear flow have been examined with dynamic mechanical and squeezing‐flow analysis. The latter allows the rheological characterization of adhesive blends under conditions modeling adhesive‐bond formation as a fixed compressive force is applied to an adhesive film. The most adhesive PVP blend with 36 wt % PEG has been established to flow like a viscoplastic (yield stress) liquid with a power‐law index of about 0.12. The study of the apparent yield stress as a function of the PVP–PEG composition, content of sorbed water, molecular weight of PVP, and temperature shows that the occurrence of a yield stress in the blends results most likely from a noncovalent crosslinking of PVP macromolecules through short PEG chains by means of hydrogen bonding of both terminal OH groups of PEG to the complementary functional groups in PVP monomer units. A molecular mechanism of PVP–PEG interaction was established earlier by direct and independent methods. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 522–537, 2006     

Graft copolymerization of N‐vinyl‐2‐pyrrolidone onto sodium carboxymethylcellulose with azobisisobutyronitrile as the initiator

Graft copolymers of sodium carboxymethylcellulose with N‐vinyl‐2‐pyrrolidone were prepared in aqueous solutions with azobisisobutyronitrile as the initiator. The graft copolymers [sodium carboxymethylcellulose‐g‐poly(N‐vinyl‐2‐pyrrolidone)] were characterized with Fourier transform infrared spectroscopy, elemental analysis, nuclear magnetic resonance spectroscopy, differential scanning calorimetry, and scanning electron microscopy. The grafting parameters, including the graft yield of the graft copolymer and the grafting efficiency of the reaction, were evaluated comparatively. The effects of reaction variables such as the time, temperature, and monomer and initiator concentrations on these parameters were studied. The graft yield and grafting efficiency increased and then decreased with increasing concentrations of N‐vinyl‐2‐pyrrolidone and azobisisobutyronitrile and increasing polymerization temperatures. The optimum temperature and polymerization time were 70°C and 4.30 h, respectively. Further changes in the properties of grafted sodium carboxymethylcellulose, such as the intrinsic viscosity, were determined. The overall activation energy for the grafting was also calculated to be 10.5 kcal/mol. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 936–943, 2007     

Poly(ethylene‐alt‐maleic acid) as complexing reagent to separate metal ions using membrane filtration

Commercial, water‐soluble poly(ethylene‐alt‐maleic anhydride), P(E‐alt‐MAn), was quantitatively hydrolyzed by 0.2M NaOH to yield poly(ethylene‐alt‐maleic acid), P(E‐alt‐MAc). The polymer structure is confirmed by FT‐IR spectroscopy. As the pH increases, metal ion affinity increases because the majority of the functional groups are present as carboxylate anions, which can form more stable complexes at a higher pH. By increasing the filtration factor, Z, metal ion affinity does not significantly decrease, which means that the ligand–metal interaction is strong and cannot be destroyed by washing with water at the filtration cell's pH. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2057–2061, 2006     

Preparation and microstructural analysis of poly(ethylene oxide) comb‐type grafted poly(N‐isopropyl acrylamide) hydrogels crosslinked by poly(ϵ‐caprolactone)

Poly(N‐isopropyl acrylamide) (PNIPAAm)‐graft‐poly(ethylene oxide) (PEO) hydrogels crosslinked by poly(?‐caprolactone) diacrylate were prepared, and their microstructures were investigated. The swelling/deswelling kinetics and compression strength were measured. The relationship between the structure and properties of hydrogel are discussed. It was found that the PEO comb‐type grafted structure reduced the thermosensitivity and increased the compression strength. The addition of poly(?‐caprolactone) (PCL) accelerated the deswelling rate of the hydrogels. Meanwhile, the entanglement of PCL chains restrained the further swelling of the network of gels. The PCL crosslinking agent and PEO comb‐type grafted structure made the behavior of the hydrogels deviate from the rubber elasticity equations. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Synthesis and reactive features of a terpolymer: Poly(N‐vinyl‐2‐pyrrolidone‐co‐vinyl acetate‐co‐glycidyl methacrylate)

A polyvinyl pyrrolidone terpolymer system is described that can be chemically cross‐linked at moderate, 70–100°C, temperatures. The system has significant potential for development of durable long‐lasting pyrrolidone coatings in a wide range of applications, particularly in water filtration membrane construction where leaching is an unresolved, serious problem. The synthesis of the terpolymer, poly(N‐vinyl‐2‐pyrrolidone‐co‐vinyl acetate‐co‐glycidyl methacrylate), by free radical polymerization is described. The reactive features of this terpolymer are presented in the context of acidic anhydride curing. In a polar aprotic solvent, the terpolymer is reacted with poly(methyl vinyl ether‐co‐maleic acid) and cured thermally. Key aspects of the terpolymer synthesis and the acid anhydride cross‐linking reaction using DSC, rheology, FTIR, and a small molecule model system to study the cross‐linking chemistry are presented. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Water‐soluble poly(ethylene glycol) prodrug of pemetrexed: Synthesis,characterization, and preliminary cytotoxicity

Pemetrexed is a novel antifolate of antimetabolite with multiple enzyme targets involved in both pyrimidine and purine synthesis. It has entered the clinical usage due to favorable profiles especially in the cancer treatment of mesothelioma and non–small‐cell lung carcinoma. But it presents numerous challenges associated with poor water solubility and unstability in its original form of glutamic acid. The aim of this study is to solubilize pemetrexed by designing and synthesizing its aqueous‐soluble prodrug using high aqueous‐soluble polymeric carrier poly(ethylene glycol) (PEG). A new type of soluble pemetrexed prodrug was synthesized with dihydroxyl PEG and a single amino acid linkage, and was extensively characterized using ¹H‐NMR, ¹³C‐NMR, Fourier‐transform infrared, and matrix‐assisted laser desorption time of flight mass spectrometry. In addition, the prodrugs were evaluated for the drug loading capability, the aqueous solubility, and the preliminary in vitro cytotoxicity. The results indicate that the new PEGylated pemetrexed conjugates possess enhanced water solubility and stability, and provide another feasible choice of the pharmaceutical form of pemetrexed in the clinical application. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Nonionic water‐soluble polymer: Preparation,characterization, and application of poly(1‐vinyl‐2‐pyrrolidone‐co‐hydroxyethylmethacrylate) as a polychelatogen

The free‐radical copolymerization of water‐soluble poly(1‐vinyl‐2‐pyrrolidone‐co‐hydroxyethylmethacrylate) was carried out with a feed monomer ratio of 75:25 mol %, and the total monomer concentration was 2.67M. The synthesis of the copolymer was carried out in dioxane at 70°C with benzoyl peroxide as the initiator. The copolymer composition was obtained with elemental analysis and ¹H‐NMR spectroscopy. The water‐soluble polymer was characterized with elemental analysis, Fourier transform infrared, ¹H‐ and ¹³C‐NMR spectroscopy, and thermal analysis. Additionally, viscosimetric measurements of the copolymer were performed. The thermal behavior of the copolymer and its complexes were investigated with differential scanning calorimetry (DSC) and thermogravimetry techniques under a nitrogen atmosphere. The copolymer showed high thermal stability and a glass transition in the DSC curves. The separation of various metal ions by the water‐soluble poly(1‐vinyl‐2‐pyrrolidone‐co‐hydroxyethylmethacrylate) reagent in the aqueous phase with liquid‐phase polymer‐based retention was investigated. The method was based on the retention of inorganic ions by this polymer in a membrane filtration cell and subsequent separation of low‐molar‐mass species from the polymer/metal‐ion complex formed. Poly(1‐vinyl‐2‐pyrrolidone‐co‐hydroxyethylmethacrylate) could bind metal ions such as Cr(III), Co(II), Zn(II), Ni(II), Cu(II), Cd(II), and Fe(III) in aqueous solutions at pHs 3, 5, and 7. The retention percentage for all the metal ions in the polymer was increased at pH 7, at which the maximum retention capacity could be observed. The interaction of inorganic ions with the hydrophilic polymer was determined as a function of the pH and filtration factor. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 178–185, 2006     

Radiation synthesis and characterization of poly(N‐vinyl‐2‐pyrrolidone/acrylic acid) and poly(N‐vinyl‐2‐pyrrolidone/acrylamide) hydrogels for some metal‐ion separation

Two different hydrogels, prepared from N‐vinyl‐2‐pyrrolidone/acrylic acid (NVP/AAc) and N‐vinyl‐2‐pyrrolidone/acrylamide (NVP/AAm), were studied for the separation and extraction of some heavy‐metal ions from wastewater. The hydrogels were prepared by the γ‐radiation‐induced copolymerization of the aforementioned binary monomer mixtures. Further modification was carried out for the NVP/AAc copolymer through an alkaline treatment to improve the swelling behavior by the conversion of the carboxylic acid groups into its sodium salts. The thermal stability and swelling properties were also investigated as functions of the N‐vinyl‐2‐pyrrolidone content. The characterization and some selected properties of the prepared hydrogels were studied, and the possibility of their practical use in wastewater treatment for heavy metals such as Cu, Ni, Co, and Cr was investigated. The maximum uptake for a given metal was higher for a treated NVP/AAc hydrogel than for an untreated NVP/AAc hydrogel and was higher for an untreated NVP/AAc hydrogel than for an NVP/AAm hydrogel. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2642–2652, 2004     

Low‐phosphorus maleic acid and sodium ρ‐styrenesulfonate copolymer as calcium carbonate scale inhibitor

In this article, a multifunctional and environment‐friendly agent for industry circulation cooling water, maleic acid and sodium ρ‐styrenesulfonate copolymer containing low‐phosphorus was synthesized in aqueous solution with hypophosphorous acid/hydrogen peroxide as redox initiators. The effects of monomer feed ratio, temperature, dose of hypophosphorous acid, and drop speed of hydrogen peroxide on calcium carbonate inhibition were investigated, and the experimental conditions were optimized using orthogonal method. The composition and structure of the copolymer were analyzed by enery‐dispersive X‐ray analysis, fourier transform infrared spectroscopy, and nuclear magnetic resonance spectroscopy. The results of the static scale inhibition tests showed that the copolymer was effective in inhibiting the formation of calcium carbonate scale. The calcium carbonate precipitates formed in the static tests were examined by scanning electronic microscopy and X‐ray diffraction spectra. The results indicate that in the presence of the copolymer the calcium carbonate precipitate is the mixture of calcite and vaterite that could be stabilized kinetically in the presence of the copolymer. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Improved swelling–deswelling behavior of poly(N‐isopropyl acrylamide) gels with poly(N,N′‐dimethyl aminoethyl methacrylate) grafts

Thermoresponsive and pH‐responsive gels were synthesized from N‐isopropyl acrylamide (NIPA) and N,N′‐dimethyl aminoethyl methacrylate (DMAEMA) monomers. Gelation reactions were carried out with both conventional free‐radical polymerization (CFRP) and controlled free‐radical polymerization [reversible addition fragmentation transfer (RAFT)] techniques. The CFRP gels were prepared by polymerizing mixtures of NIPA and DMAEMA in 1,4‐dioxane in presence of N,N'‐methylene bisacrylamide (BIS) as cross‐linker. The RAFT gels were prepared by a the polymerization of NIPA via a similar process in the presence of different amounts of poly(N,N′‐dimethyl aminoethyl methacrylate) macro chain‐transfer agent and the crosslinker. These gels were characterized by scanning electron microscopy (SEM) and differential scanning calorimetry. SEM analysis revealed a macroporous network structure for the RAFT gels, whereas their volume phase‐transition temperatures (VPTTs) were found to be in the range 32–34°C, close to that of poly(N‐isopropyl acrylamide) gels. However, the CFRP copolymer gels exhibited a higher VPTT; this increased with increasing DMAEMA content. The RAFT gels exhibited higher swelling capabilities than the corresponding CFRP gels and also showed faster shrinking–reswelling behavior in response to changes in temperature. All of the gels showed interesting pH‐responsive behavior as well. The unique structural attributes exhibited by the RAFT gels can potentially open up opportunities for developing new materials for various applications, for example, as adsorbents or carrier of drugs or biomolecules. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42749.     

Release of diclofenac through gluteraldehyde crosslinked poly(vinyl alcohol)/poly(acrylic acid) alloy membranes

A controlled‐release preparation of diclofenac sodium for transdermal administration has been developed. Poly(vinyl alcohol) (PVA) and PVA/poly(acrylic acid) (PAA) alloy membranes were prepared from a solvent‐casting technique using different PVA/PAA (v/v) ratios. The release of the drug from the membrane was evaluated under in vitro conditions at pH 7.4. The delivery system provided linear release without time lag, burst effect, and boundary layer resistance. Effects of variables such as film thickness and PVA/PAA ratio on the permeation behavior of the polymeric membranes were discussed. The optimal PVA/PAA was determined as 50/50. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 72–77, 2004     

Modification of poly(octadecene‐alt‐maleic anhydride) films by reaction with functional amines

Thin films of poly(octadecene‐alt‐maleic anhydride) on top of Si wafers and glass plates were modified by reactions with different functional amines to be used in future studies on the relevance of certain molecular surface properties for the covalent immobilization of proteins. For that aim, a strategy was developed and applied to convert the anhydride moieties of the copolymer by functional amines into side chains bearing hydrophilic groups of acidic (carboxylic acid, sulfonic acid), basic (amines), or neutral (poly(ethylene oxide) (PEO), glucose) character. The modification of the copolymer films was achieved through the two‐step formation of a cyclic imide, which was very stable in aqueous solution. Depending on the reactivity of the applied amine, the adjustment of the reaction time was suitable for the preparation of partially converted surfaces of the polymer film. Degrees of modification between 5 and 30% (according to X‐ray photoelectron spectroscopy data) were obtained. Annealing the modified polymer films induced efficient back‐formation of the anhydride groups. By reaction of the layered polyanhydrides with highly crosslinked diamines, amine‐functionalized polymer films were produced that were capable of binding secondary polyanhydride layers. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1255–1266, 2003     

Mechanochemical modification of silica with poly(1‐vinyl‐2‐pyrrolidone) by grinding in a stirred media mill

The polymerization of 1‐vinyl‐2‐pyrrolidone (VP) mechanochemically initiated by grinding silica was investigated in a wet stirred media mill. The polymerization itself proceeds from the silica grinding without any additional initiator. We have found that the amount of grafted polymer increases with an increase in total ground silica surface. The suspension of polymer‐modified silica nanoparticles showed high colloidal stability in water because of the appearance of grafted hydrophilic PVP on the surface during the reactive grinding. Because the nanoparticles SiO₂‐graft‐PVP are biocompatible, the developed polymer nanocomposite material can be of particular interest for the performance of membranes and for the fabrication of biocompatible hydrogels with enhanced mechanical properties and porosity. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 3708–3714, 2007     

Specific interactions in 4‐hydroxybenzoic acid/poly(2‐vinylpyridine)/poly(N‐vinyl‐2‐pyrrolidone) blends

The specific interactions in ternary 4‐hydroxybenzoic acid (HBA)/poly(2‐vinylpyridine) (P2VPy)/poly(N‐vinyl‐2‐pyrrolidone) (PVP) blends were studied by differential scanning calorimetry, Fourier transform infrared (FTIR) spectroscopy, and electron microscopy. FTIR study shows the existence of hydrogen‐bonding interactions between HBA and P2VPy as well as PVP. The addition of a sufficiently large amount of HBA produces a blend showing one glass‐transition temperature (T_g). Microscopic study shows a drastic reduction in domain size in single‐T_g blends. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 901–907, 2001     

Thermal and microwave‐assisted oxidative degradation of poly(ethylene oxide)

The kinetics of the thermal and microwave‐assisted oxidative degradation of poly(ethylene oxide) were determined with potassium persulfate as the oxidizing agent. Gel permeation chromatography was used to determine the variation of the molecular weight with time. The degradation was studied as a function of the temperature and persulfate concentration, and it was found that the degradation rate increased with the temperature and concentration of persulfate. Continuous distribution kinetics were used to determine the rate coefficients for the degradation process, and the activation energies were obtained. The results indicated that the microwave‐assisted process had a lower activation energy of 10.3 kcal/mol, whereas that of the thermal degradation was 25.2 kcal/mol. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 2090–2096, 2005     

Hydrogel characteristics of a novel temperature‐sensitive polymer,poly(N‐2‐methoxyisopropylacrylamide)

In this study, a novel temperature‐sensitive polymer, poly(N‐2‐methoxyisopropylacrylamide), PNMIPA, in the crosslinked hydrogel form was obtained. The monomer, N‐2‐methoxyisopropylacrylamide (NMIPA) was synthesized by the nucleophilic substitution reactions of acryloyl chloride with 2‐methoxyisopropylamine. Hydrogel matrix of PNMIPA was obtained by the bulk polymerization method. The bulk polymerization experiments were performed at +4°C, by using N,N‐methylenebisacrylamide (MBA) as crosslinker, polyethyleneglycol (PEG) 4000 as diluent, and potassium persulfate (KPS) and tetramethylethylenediamine (TEMED) as the initiator and accelerator, respectively. The same polymerization procedures were applied by changing monomer, initiator, crosslinker and diluent concentrations in order to obtain crosslinked gel structures having different temperature–sensitivity properties. The equilibrium swelling ratio of PNIMPA gel matrices at constant temperature increased with increasing initiator concentration and decreasing monomer concentration. The use of PEG 4000 as diluent in the gel synthesis resulted in about two times increase in equilibrium swelling ratios in the low temperature region. A decrease in the equilibrium swelling ratios of gel matrices started at 30°C and the decrease became insignificant at 55°C. Temperature‐sensitivities were determined in two different media. Distilled water medium was used in order to observe the temperature‐sensitivity of the gel clearly and the phosphate buffer medium was used in order to represent the temperature‐sensitive swelling behavior of the gel when it is used in biological media. Step effect was applied on ambient temperature in two opposite directions in order to examine the dynamic swelling and shrinking behaviors of the gels. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Rheological study of poly(ethylene glycol)/poly(N‐isopropylacrylamide‐co‐2‐acrylamido‐2‐methylpropanesulphonic acid) semiinterpenetrating network formation

The formation of a series of semiinterpenetrating network (SIPN) hydrogels made by free‐radical copolymerization of N‐isopropylacrylamide (NIPA) and 2‐acrylamido‐2‐methylpropanesulphonic acid (AMPS) with varying comonomer mole ratios, crosslinked with N,N′‐methylene‐bisacrylamide (MBAA) in the presence of poly(ethylene glycol) (PEG) with average molecular weight 6,000 g mol^?1 was studied via determination of complex viscosity, η*, using plate–plate rheometry. The isothermal time dependence of η* at various temperatures or the variation of η* with temperature of pregel solutions was utilized to detect the onset of gelation. The SIPN systems were compared with the corresponding gels made under the same conditions in the absence of PEG. The copolymer mainchain composition has a major effect on the time or temperature for onset of gelation and in particular gelation appears to be inhibited to some extent by MBAA when the AMPS/NIPA mole ratio in the pregel solution exceeds 0.5. The presence or absence of PEG in pregel solutions has a lesser effect on gelation. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 2083–2087, 2004     

Synthesis and characterization of poly(N‐vinyl‐2‐pyrrolidone) grafted sodium alginate hydrogel beads for the controlled release of indomethacin

Graft copolymers of sodium alginate (NaAlg) with N‐vinyl‐2‐pyrrolidone were prepared using azobisisobutyronitrile as initiator. The graft copolymers (NaAlg‐g‐PVP) were characterized with Fourier transform infrared spectroscopy, elemental analysis, and differential scanning calorimetry. Polymeric hydrogel beads of NaAlg and NaAlg‐g‐PVP were prepared by crosslinking method using glutaraldehyde (GA) as a crosslinker in the hydrochloric acid catalyst (HCl) and these beads were used to deliver anti‐inflammatory drug, indomethacin (IM). Chemical stability of the IM after encapsulation into beads was confirmed by FTIR. Preparation conditions of the NaAlg‐g‐PVP beads were optimized by considering the percentage entrapment efficiency, particle size, swelling capacity and their release data. In vitro release studies were performed in simulated gastric fluid (pH 1.2) for the initial 2 h, followed by simulated intestinal fluid (pH 7.4) for 4 h. Effects of GA concentration, exposure time to GA, drug/polymer (d/p) ratio, and concentration of HCl on the release of IM were discussed. It was observed that IM release from the beads decreased with increasing GA concentration and exposure time. IM release also decreases with increasing d/p ratio and HCl concentration. The highest IM release was obtained to be 77% for beads crosslinked with 0.027M GA. Swelling experiments were also performed to compute molecular mass between crosslinks of the beads. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008