Temperature‐responsive characteristics of poly(N‐isopropylacrylamide) hydrogels with macroporous structure

Macroporous poly(N‐isopropylacrylamide) (PNIPA) hydrogels were synthesized by free‐radical crosslinking polymerization in aqueous solution from N‐isopropylacrylamide monomer and N,N‐methylenebis (acrylamide) crosslinker using poly(ethylene glycol) (PEG) with three different number‐average molecular weights of 300, 600 and 1000 g mol^?1 as the pore‐forming agent. The influence of the molecular weight and amount of PEG pore‐forming agent on the swelling ratio and network parameters such as polymer–solvent interaction parameter (χ) and crosslinking density (ν_E) of the hydrogels is reported and discussed. Scanning electron micrographs reveal that the macroporous network structure of the hydrogels can be adjusted by applying different molecular weights and compositions of PEG during polymerization. At a temperature below the volume phase transition temperature, the macroporous hydrogels absorbed larger amounts of water compared to that of conventional PNIPA hydrogels, and showed higher equilibrated swelling ratios in aqueous medium. Particularly, the unique macroporous structure provides numerous water channels for water diffusion in or out of the matrix and, therefore, an improved response rate to external temperature changes during the swelling and deswelling process. These macroporous PNIPA hydrogels may be useful for potential applications in controlled release of macromolecular active agents. Copyright © 2006 Society of Chemical Industry     

Thermal characterizations of semi‐interpenetrating polymer networks composed of poly(ethylene oxide) and poly(N‐isopropylacrylamide)

Poly(N‐isopropylacrylamide) (PNIPAAm)/poly(ethylene oxide) (PEO) semi‐interpenetrating polymer networks (semi‐IPNs) synthesized by radical polymerization of N‐isopropylacrylamide (NIPAAm) in the presence of PEO. The thermal characterizations of the semi‐IPNs were investigated by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and dielectric analysis (DEA). The melting temperature (T_m) of semi‐IPNs appeared at around 60°C using DSC. DEA was employed to ascertain the glass transition temperature (T_g) and determine the activation energy (E_a) of semi‐IPNs. From the results of DEA, semi‐IPNs exhibited one T_g indicating the presence of phase separation in the semi‐IPN, and T_gs of semi‐IPNs were observed with increasing PNIPAAm content. The thermal decomposition of semi‐IPNa was investigated using TGA and appeared at around 370°C. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3922–3927, 2003     

Preparation and characterization of thermosensitive poly(N‐isopropylacrylamide)/poly(ethylene oxide) semi‐interpenetrating polymer networks

Temperature‐sensitive poly(N‐isopropylacrylamide) hydrogels were successfully synthesized by using poly(ethylene oxide) as the interpenetrating agent. The newly prepared semi‐interpenetrating polymer network (semi‐IPN) hydrogels exhibited much better properties as temperature‐sensitive polymers than they did in the past. Characterizations of the IPN hydrogels were investigated using a swelling experiment, FTIR spectroscopy, and differential scanning calorimetry (DSC). Semi‐IPN hydrogels exhibited a relatively high temperature dependent swelling ratio in the range of 23–28 at room temperature. DSC was used for the determination of the lower critical solution temperature of the semi‐IPN hydrogel. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3032–3036, 2003     

Network parameters and volume phase transition behavior of poly(N‐isopropylacrylamide) hydrogels

Thermosensitive hydrogels were prepared by free radical polymerization in aqueous solution from N‐isopropylacrylamide (NIPA) monomer and N,N‐methylenebis(acrylamide) (MBAAm) crosslinker. The swelling equilibrium of the hydrogels in deionized water was investigated as a function of temperature and MBAAm content. The results indicated that the swelling behavior and temperature sensitivity of the hydrogels were affected by the amount of MBAAm content. The average molecular mass between crosslinks and polymer–solvent interaction parameter (χ) of the hydrogels were determined from equilibrium swelling values. The swelling variations were explained according to swelling theory based on the hydrogel chemical structure. The swelling equilibrium of the hydrogels was also investigated as a function of temperature in aqueous solutions of the anionic surfactant sodium dodecyl sulfate (SDS) and the cationic surfactant dodecyltrimethylammonium bromide (DTAB). In deionized water, the hydrogels showed a discontinuous volume phase transition at 32°C. In SDS and DTAB solutions, the equilibrium swelling ratio and the volume phase transition temperature (lower critical solution temperature) of the hydrogels increased, which is ascribed to the conversion of nonionic PNIPA hydrogel into polyelectrolyte hydrogels because of binding of surfactant molecules through the hydrophobic interaction. Additionally, the amount of free SDS and DTAB ions was measured at different temperatures by a conductometric method; it was found that the electric conductivity of the PNIPA–surfactant systems depended strongly on both the type and concentration of surfactant solutions. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 1756–1762, 2006     

Temperature‐sensitive switch from composite poly(N‐isopropylacrylamide) sponge gels

Thermally sensitive polymers change their properties with a change in environmental temperature in a predictable and pronounced way. These changes can be expected in drug delivery systems, solute separation, enzyme immobilization, energy‐transducer processes, and photosensitive materials. We have demonstrated a thermal‐sensitive switch module, which is capable of converting thermal into mechanical energy. We employed this module in the control of liquid transfer. The thermally sensitive switch was prepared by crosslinking poly(N‐isopropylacrylamide) (PNIPAAm) gel inside the pores of a sponge to generate the composite PNIPAAm/sponge gel. This gel, contained in a polypropylene tube, was inserted into a thermoelectric module equipped with a fine temperature controller. As the water flux through the composite gel changes from 0 to 6.6 × 10² L m⁻² h, with a temperature change from 23 to 40°C, we can reversibly turn on and off the thermally sensitive switch. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 75:1735–1739, 2000     

Preparation and properties of temperature‐sensitive soy protein/poly(N‐isopropylacrylamide) interpenetrating polymer network hydrogels

Temperature‐sensitive interpenetrating polymer network (IPN) hydrogels based on soy protein and poly(N‐isopropylacrylamide) were successfully prepared. The structure and properties were systematically characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, differential scanning calorimetry and thermogravimetric analysis, and the swelling and deswelling behavior was also investigated. It was found that the hydrogels had good miscibility, thermal stability and temperature sensitivity, and the lower critical solution temperature was ca 32 °C. Changing the content of soy protein or crosslinker could be used to control the swelling behavior, water retention and network structure of the IPN hydrogels. The results show that the novel IPN hydrogels may be of potential interest in drug delivery systems. Copyright © 2011 Society of Chemical Industry     

Preparation of temperature sensitive poly(vinylidene fluoride) hollow fiber membranes grafted with N‐isopropylacrylamide by a novel approach

In the present study, the temperature sensitive PVDF‐g‐NIPAAm HFM was prepared by grafting N‐isopropylacrylamide (NIPAAm) on poly(vinylidene fluoride) (PVDF) hollow fiber membrane (HFM) using a novel approach, alkaline treatment method. The structures of PVDF‐g‐NIPAAm HFM were characterized by scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR), respectively. The effects of alkaline treatment time and grafting yield on the mechanical properties of PVDF HFM were measured and analyzed. In addition, the temperature sensitive behavior of PVDF‐g‐NIPAAm HFM and the effect of grafting yield on the temperature sensitive behavior were investigated by the flux of pure water and the rejection of ovalbumin. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 833–837, 2006     

Properties of interpenetrating polymer network hydrogels composed of poly(vinyl alcohol) and poly(N‐isopropylacrylamide)

Interpenetrating polymer network (IPN) hydrogels based on poly(vinyl alcohol) and poly(N‐isopropylacrylamide) were prepared by the sequential‐IPN method. The IPN hydrogels were analyzed for sorption behavior of water at 35°C and at a relative humidity of 95% using a dynamic vapor sorption system, and water diffusion coefficients were calculated. Differential scanning calorimetry was used for the quantitative determination of the amounts of freezing and nonfreezing water. Free water contents in the IPN hydrogel of IPN1, IPN2, and IPN3 were 45.8, 37.9 and 33.1% in pure water, respectively. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2041–2045, 2003     

Synthesis and characterization of pH‐ and temperature‐sensitive silk sericin/poly(N‐isopropylacrylamide) interpenetrating polymer networks

Interpenetrating polymer networks (IPNs) composed of silk sericin (SS) and poly(N‐isopropylacrylamide) (PNIPAAm) were prepared simultaneously. The properties of the resultant IPN hydrogels were characterized by differential scanning calorimetry and SEM as well as their swelling behavior at various temperatures and pH values. The single glass transition temperature (T_g) presented in the IPN thermograms indicated that SS and PNIPAAm form a miscible pair. The swollen morphology of the IPNs observed by SEM demonstrated that water channels (pores present in SEM micrographs) were distributed homogeneously through out the network membranes. The swelling ratio of the IPNs depended significantly on the composition, temperature and pH of the buffer solutions. The dynamic transport of water into the IPN membrane was analyzed based on the Fickian equation. Copyright © 2006 Society of Chemical Industry     

Thermoreversible hydrogels. XIX. Synthesis and swelling behavior and drug release behavior for the N‐isopropylacrylamide/poly(ethylene glycol) methylether acrylate copolymeric hydrogels

A series of thermosensitive copolymeric hydrogels were prepared from various molar ratios of N‐isopropylacrylamide (NIPAAm) and poly(ethylene glycol) methylether acrylate (PEGMEA_n), which was synthesized from acryloyl chloride and poly(ethylene glycol) mono methylether with three oxyethylene chain lengths. Investigation of the effect of the chain length of oxyethylene in PEGMEA_n, and the amount of the PEGMEA_n in the NIPAAm/PEGMEA_n copolymeric gels, on swelling behavior in deionized water was the main purpose of this study. Results showed that the swelling ratio for the present copolymeric gels increased with increasing chain length of oxyethylene in PEGMEA_n and also increased with increase in the amount of PEGMEA_n in the copolymeric gels. However, the gel strength and effective crosslinking density of these gels decreased with increase in swelling ratio. Some kinetic parameters were also evaluated in this study. Finally, the drug release and drug delivery behavior for these gels were also assessed. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1683–1691, 2003     

Thermodynamic investigation of thermoresponsive xanthan‐poly (N‐isopropylacrylamide) hydrogels

Polysaccharide‐based hydrogels, such as xanthan maleate/poly(N‐isopropylacrylamide) (PNIPAAm) interpenetrated polymer networks, are thermostimulable materials of interest for the controlled release of biologically active components due to conformation changes at the low critical‐solution temperature (LCST) PNIPAAm phase transition. The phase transition of these interpenetrated polymer network hydrogels, where PNIPAAm is in a ‘confined’ environment, was examined by high resolution magic angle spinning nuclear magnetic resonance and differential scanning calorimetry. High resolution magic angle spinning nuclear magnetic resonance spectroscopy allows the accurate determination of LCST and an evaluation of the corresponding thermodynamic data. More particularly, the evolution of these data as a function of the composition of the hydrogel, and of the external parameters such as pH and ionic strength, was considered. LCST shows a minimal value with increasing xanthan content. Moreover, it was possible to calculate, as a function of temperature, the fraction of NIPAAm which remains uncollapsed. The data obtained for pure PNIPAAm hydrogels are in good agreement with recently published results. The phase transition of PNIPAAm in a diphasic hydrogel is broader when PNIPAAm is ‘confined’ within an interpenetrated polymer network than in a pure PNIPAAm crosslinked network. The widening of the transition with increasing xanthan content indicates a reduction of the PNIPAAm interchain aggregation in a network structure. Copyright © 2011 Society of Chemical Industry     

Adsorption of nile red by poly(N‐isopropylacrylamide) gels in binary water/tetrahydrofuran mixtures

The adsorption of Nile Red by poly(N‐isopropylacrylamide) (PNIPAM) gels in binary water/tetrahydrofuran solutions was investigated using absorption spectrophotometry as a function of the volume fraction of THF, φ. Due to the cononsolvency abilities of such binary solvent mixtures, deswelling of the PNIPAM gels is observed in water‐rich mixtures, 0 ≤ φ ≤ 0.6, while the gels reswell for φ > 0.6. The position of the absorption band of Nile Red before and after equilibration with the PNIPAM gels indicates that the composition of the external solvent mixture is not practically influenced by the swelling process. On the other hand, it is found that the gels can effectively adsorb Nile Red in water‐rich mixtures (φ < 0.6), whereas no significant adsorption was observed in tetrahydrofuran‐rich mixtures. In fact, about 80% of the dye is adsorbed by the PNIPAM gels, at φ = 0.2. Under these conditions, the rather shrunk PNIPAM gel offers a more convenient less polar environment for Nile Red than the water‐rich bulk solvent. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Sulfur containing poly(N‐isopropylacrylamide) copolymer hydrogels for thermosensitive extraction of gold(III) ions

Poly[N‐isopropylacrylamide‐co‐[2‐(methylthio)ethyl methacrylate]], poly(NIPA‐co‐MTEMA) gels were prepared by free radical polymerization in aqueous solution. The homogeneous and heterogeneous gels were prepared by using 10 mM MTEMA in 5.0%(v/v) ethanol at 10°C and 30 mM MTEMA in 20%(v/v) ethanol at 50°C, in 1.0 and 1.5M NIPA solution, respectively. Homogeneous and heterogeneous gels had swelling ratios at 540 ± 28% and 551 ± 37%, respectively. The extraction of Au(III) ion was studied in batch method. The optimum pHs for the extraction of Au(III) by homogeneous and heterogeneous gels were 1–3 and 1–5, respectively. The suitable extraction time was 3 h at 50°C when using a rod‐shaped copolymer (0.7 cm diameter and 1 cm length). The adsorption behavior obeyed the Langmuir and Freundlich isotherms. The maximum sorption capacities of Au(III) onto homogeneous and heterogeneous gels were 62.8 and 322 μmol/g, respectively. The desorption equilibrium was reached within 2–3 h at 10°C by 0.1M thiourea in 5%(v/v) HCl. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Preparation and performance of thermosensitive poly(N‐isopropylacrylamide) hydrogels by frontal photopolymerization

In this study, frontal photopolymerization was applied to the fabrication of thermosensitive poly(N‐isopropylacrylamide) (PNIPAm) hydrogels. The influence of experimental conditions and reactant components on the feature of the polymerization front was investigated. The morphology of the samples indicated the successful preparation of PNIPAm hydrogels. The mechanical properties and thermal stability of the obtained hydrogels are discussed. The results indicated that the performance of the hydrogels is related to their microstructure and the type of crosslinkers. The swelling behavior and drug delivery ability were determined under different temperature conditions. The hydrogels exhibit a classical thermoresponsive behavior, which was also demonstrated by the DSC results. Therefore, frontal photopolymerization can be an alternative method for the preparation of PNIPAm hydrogels under mild conditions. © 2019 Society of Chemical Industry     

Poly(N‐isopropylacrylamide) grafting on aluminium to actively switch its surface drag in water

Active control of flow over object surfaces achieved by means of mechanical and/or electrical methods has recently been studied. However, there has been no report on actively switching the surface drag of an object by chemical modification of the object's surface. Poly(N‐isopropylacrylamide) (PNIPA) was grafted onto the surface of an aluminium (Al) substrate via (A) surface‐initiated atom transfer radical polymerization and (B) radical polymerization with an azo‐group surface initiator. The grafting density was 0.19 and 0.15 chains nm^?2, respectively. The water contact angle of the PNIPA‐grafted Al surface reversibly changed between 55° and 82° for (A) and between 42° and 65° for (B) at temperatures of 25 and 40 °C, which was ascribed to the temperature‐responsive, hydrophilic–hydrophobic switching of the grafted PNIPA surface. The PNIPA grafting was applied on the surface of an ogive‐shaped Al model. The normalized dropping speed of the model in water increased 1.1 times at 42 °C in comparison to that at 22 °C. Switching of the surface drag of PNIPA‐grafted Al in water was demonstrated on the basis of the hydrophilicity and hydrophobicity of the grafted Al surface, the switching occurring with a change in temperature. Copyright © 2010 Society of Chemical Industry     

Physical properties of poly(vinyl chloride)–grafted N‐isopropylacrylamide graft copolymers and corresponding polyblends

The physical properties of poly(vinyl chloride) (PVC) and poly(N‐isopropylacrylamide) [poly(NIPAAm)] blend systems, and their corresponding graft copolymers such as PVC‐g‐NIPAAm, were investigated in this work. The compatible range for PVC–poly(NIPAAm) blend systems is less than 15 wt % poly(NIPAAm). The water absorbencies for the grafted films increase with increase in graft percentage. The water absorbencies for the blend systems increase with increase in poly(NIPAAm) content within the compatible range for the blends, but the absorbencies decrease when the amount of poly(NIPAAm) is more than the compatible range in the blend system. The tensile strengths for the graft copolymers are larger than the corresponding blends. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 76: 170–178, 2000     

Thermosensitive fibres of lyocell/poly(N‐isopropylacrylamide): multiparametric analysis for studying the graft copolymerization

The thermosensitive properties of the hydrogel poly(N‐isopropylacrylamide) (pNIPAAm) together with the good mechanical properties of lyocell fibres make a combination of the two to be thought of as a smart textile. In the present study the optimal values of various parameters that control the grafting process of pNIPAAm onto lyocell fibres were determined considering the influence of the interaction between them. The copolymerization of pNIPAAm hydrogel onto lyocell fibres was performed in aqueous acidic medium using cerium(IV) as initiator. An experimental design was planned in order to study the effect of the interactions between some variables that affect the kinetics of the graft copolymerization: the cerium(IV) initiator concentration, the N‐isopropylacrylamide (NIPAAm) monomer concentration and the liquor fibre‐to‐bath ratio. The results show that the interaction between the concentrations of NIPAAm and the initiator significantly affects the degree of grafting (DG), the optimum values being 1250 and 12.25 mmol L^?1, respectively. In contrast, the liquor ratio parameter shows no significant interaction with the other two variables studied, meaning that it acts independently but showing a proportional relationship with respect to the DG obtained. In addition, the presence of pNIPAAm in the copolymer obtained was confirmed by Fourier transform infrared spectral analysis. Moreover, the water sorption capacity, depending on the temperature, of the lyocell/pNIPAAm copolymer was studied, with an increase being observed when the DG is higher than 60% and also increasing with the temperature.© 2012 Society of Chemical Industry     

Synthesis of poly(N,N‐diethylacrylamide‐co‐acrylic acid) hydrogels with fast response rate in NaCl medium

A series of thermo‐ and pH‐sensitive poly (N,N‐diethylacrylamide‐co‐acrylic acid) (P(DEA‐co‐AA)) hydrogels were prepared in NaCl aqueous solutions with different concentrations. Swelling and deswelling studies showed that in comparison with conventional P(DEA‐co‐AA) hydrogels (prepared in distilled water), the P(DEA‐co‐AA) hydrogels thus prepared had almost the same volume phase transition temperature (VPTT), but exhibited much faster response rates as the temperature was raised above their VPTT. Besides, the hydrogels prepared by this method had faster response rates in low pH buffer solutions, and the response rates increased with the increased concentration of the NaCl solutions used during the polymerization. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Preparation of composite‐crosslinked poly(N‐isopropylacrylamide) gel layer and characteristics of reverse hydrophilic–hydrophobic surface

The composite‐crosslinked poly(N‐isopropylacrylamide) (PNIPAAm) gels were prepared by grafting N‐isopropylacrylamide on the surface of glass plates modified by organosilanes. The glass plates as the substrate increase the mechanical strength of composite PNIPAAm gel layers. We investigated the effects of a series of organosilanes and the reaction time of organosilanes on surface characteristics, such as the static contact angle and the layer thickness. We discuss the equilibrium swelling ratio and the water release behavior of the gel layers in terms of the crosslinking density of the composite gels. The composite gels exhibit not only the characteristics of remarkable water release but also the reversed hydrophilic–hydrophobic surface properties. The gel layers are hydrophilic under 25°C and change to hydrophobic above 40°C. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 72: 1–11, 1999     

Effects of cononsolvency on preferential adsorption phenomenon in poly(N‐isopropylacrylamide) ternary solutions

In this work, the effect of cononsolvency on the phase transition and preferential adsorption phenomenon behaviors of poly(N‐isopropylacrylamide)/methanol/water ternary solutions was studied. In this cononsolvent system, the , , and χ₁₂ values show a nonlinear behavior and the minimum values of and , while the maximum value of χ₁₂ at ϕ₂ is around 0.7. These facts indicated that one water molecule could directly bond with one methanol molecule to form the H₂O MeOH complex. The H₂O MeOH complex structure was found to remarkably affect the phase transition of poly(N‐isopropylacrylamide) (PNIPAM) in ternary solution. However, at the composition of mixed cononsolvent, ϕ₂ < 0.2, the PNIPAM molecules may preferentially adsorbed pure water molecules; therefore, the LCST decreases slightly with composition of mixed cosolvent and this may be because of the small amount of H₂O MeOH complexes in the mixed cononsolvent. While, at ϕ₂ > 0.7, the PNIPAM molecules may preferentially adsorbed pure methanol molecules. PNIPAM ternary solutions were transparent and no transition occurred in this region. This indicates that the PNIPAM coils exhibited a much‐extended conformation in solutions. In contrast, at 0.2 < ϕ₂ < 0.4 and 0.4 < ϕ₂ < 0.7, PNIPAM molecules preferentially adsorbed water and methanol molecules, respectively, and also adsorbed large amount of H₂O MeOH complexes. In these regions, the clathrate‐like structure around the side chain of PNIPAM molecule became more defected with adsorbing H₂O MeOH complex. Therefore, we considered that the various thermodynamic behaviors between PNIPAM and mixture solvents must be related different preferential adsorption phenomena, which were mainly related to different degrees of polymer–solvent interaction and structures of solvent used. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008