Graft polymerization of styrene onto random ethylene–propylene diene monomer

The graft copolymerization of styrene (St) onto random ethylene–propylene diene monomer (EPDM) with benzoyl peroxide (BPO) and 2,2-azo-bis-isobutyronitrile (AIBN) as the initiator in solvent was studied. Results showed that BPO was superior to AIBN. The influence factors, such as reaction St and BPO, on the extent of graft were discussed. The existence of a grafted copolymer was verified by infrared spectra, NMR, and thin-laver chromatography. The grafted copolymer was characterized by thermally stimulated current. © 1996 John Wiley & Sons, Inc.     

Synthesis of styrene–ethylene–butylene–styrene triblock copolymer‐g‐polylactic acid copolymer and its potential application as a toughener for polylactic acid

The copolymer of styrene–ethylene–butylene–styrene triblock copolymer‐g‐polylactic acid (SEBS‐g‐PLA) was successfully prepared using a novel solvothermal synthetic method, in which the graft copolymerization of PLA and SEBS was simply performed in cholorform solution at 100–150°C with benzoyl peroxide (BPO) as initiator. The effect of various factors including the reaction temperature and time and the content of BPO and PLA on the graft copolymerization was investigated in detail. It is found that the optimal reaction condition for the grafted copolymers SEBS‐g‐PLA was 120°C for 5 h, while the optimal formulation of SEBS/PLA/BPO was 5 g/2 g/0.5 g in 30 mL chloroform. The properties and microstructures of the obtained SEBS‐g‐PLA copolymers were also studied. The tensile strength and elongation at break were higher than that of pure SEBS and improved with the increase of grafting degree. In addition, SEBS‐g‐PLA copolymer possessed two‐phase structure with vague phase boundaries. The as‐prepared SEBS‐g‐PLA copolymers can be used as the toughening component to improve the impact strength of PLA. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Modification of acrylonitrile–butadiene–styrene terpolymer by grafting with maleic anhydride in the melt. I. Preparation and characterization

The graft copolymerization of maleic anhydride (MAH) onto acrylonitrile–butadiene–styrene terpolymer (ABS) was carried out with dicumyl peroxide (DCP) and benzoyl peroxide (BPO) as the binary initiators and with styrene as the comonomer in the molten state. IR spectra confirmed that MAH was successfully grafted onto the ABS backbone. A reaction mechanism was proposed: the grafting most likely took place through the addition of MAH radicals to the double bond of the butadiene region of ABS. Influences such as the MAH concentration, the initiators and their concentrations, the reaction temperature, the rotating speed, and the comonomer concentration were studied. The results indicated that using styrene as a comonomer and DCP/BPO as binary initiators was beneficial for the graft copolymerization. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1249–1254, 2003     

聚乙烯的化学改性——丙烯酸在聚乙烯上的接枝共聚及其表征

在二甲苯溶液中以过氧化苯甲酰为引发剂研究了丙烯酸在聚乙烯上的接枝共聚。讨论了反应温度、单体浓度和引发剂浓度对接枝率的影响。用红外光谱、ＸＰＳ、薄层色谱和接触角证实了接枝物的存在。又制备了接枝物钠盐。     

Phase‐transfer‐agent‐aided polymerization and graft copolymerization of acrylamide

The use of phase‐transfer catalysts, with water‐insoluble initiators, for polymerization and graft copolymerization reactions was explored. The polymerization of a water‐soluble vinyl monomer, acrylamide (AAm), and the graft copolymerization of AAm onto a water‐insoluble polymer backbone, isotactic polypropylene (IPP), with a water‐insoluble initiator, benzoyl peroxide (BPO), and a phase‐transfer catalyst, tetrabutyl ammonium bromide (Bu₄N⁺Br^?), were carried out in a water/xylene binary solvent system. The conversion percentage of AAm into polyacrylamide (PAAm) and the percentage of grafting of AAm onto IPP were determined as functions of various reaction parameters, such as the BPO, AAm, and phase‐transfer‐catalyst concentrations, the amounts of water and xylene in the water/xylene mixture, the time, and the temperature. The graft copolymer, IPP‐g‐PAAm, was characterized with IR spectroscopy and thermogravimetric analysis. By a comparison of the results of the phase‐transfer‐catalyzed graft copolymerization of AAm onto IPP and the preirradiation method, it was observed that the optimum reaction conditions were milder for the phase‐transfer‐catalyst‐aided graft copolymerization. Milder reaction conditions, including the temperature, the time of reaction, and a moderate initiator (BPO), in comparison with high‐energy γ‐rays, led to better quality products, and the reaction proceeded smoothly with high productivity. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 2364–2375, 2004     

Synthesis and characterization of xanthan gum‐g‐N‐vinyl formamide with a potassium monopersulfate/Ag(I) system

A xanthan gum‐g‐N‐vinyl formamide graft copolymer was synthesized through the graft copolymerization of N‐vinyl formamide (NVF) onto xanthan gum with an efficient system, that is, potassium monopersulfate (PMS)/Ag(I) in an aqueous medium. The effects of the concentrations of Ag(I), PMS (KHSO₅), hydrogen ion, xanthan gum, and NVF along with the time and temperature on the graft copolymerization were studied by the determination of the grafting parameters (grafting ratio, add‐on, conversion, grafting efficiency, and homopolymer) and the rate of grafting. The maximum grafting ratio was obtained at a 0.6 g/dm³ concentration of xanthan gum. All the parameters showed an increasing trend with an increasing concentration of peroxymonosulfate, except the homopolymer percentage, which showed a decreasing trend. The grafting ratio, add‐on conversion, grafting efficiency, and rate of grafting increased with the concentration of Ag(I) increasing from 0.8 × 10^?2 to 1.2 × 10^?2 mol/dm³. The optimum time and temperature for the maximum degree of grafting were 90 min and 35°C, respectively. The graft copolymer was characterized with IR spectral analysis, thermogravimetric analysis, and differential calorimetry analysis. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 1637–1645, 2006     

Syntheses of acrylate core/shell imbiber beads by seeded suspension copolymerization and one‐stage copolymerization for solvent absorption–desorption

Seeded suspension copolymerization or a one‐stage copolymerization was used to synthesize acrylate core/shell imbiber beads. A two‐stage polymerization technique was used for seeded suspension polymerization. The seed particles for poly(methyl acrylate) or poly(2‐ethylhexyl acrylate) were synthesized first in a mixed solvent of toluene/isooctane containing the ethylene glycol dimethacrylate (EGDMA) crosslinking agent. These beads were swollen in styrene‐EGDMA‐BPO (benzoyl peroxide) and then polymerized in the aqueous phase to produce the polystyrene (PS) shell. The one‐stage copolymerization was carried out in toluene/isooctane containing methyl methacrylate (MMA), styrene (St), EGDMA, and BPO at 75°C for 10 h to give a core/shell copolymer of St‐MMA morphology. The appearance of core/shell imbiber beads prepared from these two techniques varied from monomer to monomer. This article describes the preparation, characterization, and application of the core/shell beads for organic solvent absorption/desorption. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 670–682, 2002     

Radiation-initiated graft copolymerization of binary monomer mixtures containing acrylonitrile with cotton cellulose

By the use of the cobalt 60 postirradiation grafting technique, purified cotton cellulose fibers were graft-copolymerized with binary mixtures of acrylonitrile and other monomers, including styrene, 1,3-butylene dimethacrylate, vinylpyrrolidone, vinylidene chloride, and methyl, butyl, lauryl, glycidyl, and allyl methacrylates. The irradiated cotton fibers were immersed in solutions of the monomers at 25°C to initiate graft copolymerization. Solvents were water, methanol, dimethyl sulfoxide, and methyl ethyl ketone, alone or in several combinations. The extent of graft copolymerization and the composition of the grafted copolymer depended on the composition of the binary mixtures of monomers and on the solvent or mixtures of solvents used. For example, addition of styrene, 1,3-butylene dimethacrylate, or vinylpyrrolidone to acrylonitrile increased the extent of graft copolymerization to a maximum value; addition of vinylidene chloride or allyl methacrylate to acrylonitrile did not greatly affect the extent of graft copolymerization; and addition of methyl or glycidyl methacrylate to acrylonitrile increased the extent of graft copolymerization without passing through a maximum value. The proportion of acrylonitrile in the grafted copolymer was generally less than that in the binary mixtures. As the reaction time was increased, the extent of graft copolymerization increased to a maximum value; however, the composition of the grafted copolymer did not change significantly. Generally, the addition of water to the solutions increased the extent of graft copolymerization. The mechanisms of these graft copolymerization reactions are discussed.     

Graft copolymerization of methylmethacrylate with N‐substituted maleimide‐styrene copolymer by ATRP

Atom transfer radical polymerization (ATRP) was employed to prepare graft copolymers having poly(MBr)‐alt‐poly(St) copolymer as backbone and poly(methyl methacrylate) (PMMA) as branches to obtain heat resistant graft copolymers. The macroinitiator was prepared by copolymerization of bromine functionalized maleimide (MBr) with styrene (St). The polymerization of MMA was initiated by poly(MBr)‐alt‐poly(St) carrying bromine groups as macroinitiator in the presence of copper bromide (CuBr) and bipyridine (bpy) at 110°C. Both macroinitiator and graft copolymers were characterized by ¹H NMR, GPC, DSC, and TGA. The ATRP graft copolymerization was supported by an increase in the molecular weight (MW) of the graft copolymers as compared to that of the macroinitiator and also by their monomodal MW distribution. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Studies on the graft polymerizations of styrene and methyl methacrylate to hydroxyl terminated polybutadiene

Hydroxyl terminated Polybutadiene (HTPB) was grafted with styrene (St) or methyl methacrylate (MMA) by free radical solution polymerization. The graft copolymerizations were conducted in benzene at 70 °C. The initiators used were benzoyl peroxide (BPO) and azobis-isobutyronitrile (AIBN). The microstructures of theobtained graft copolymers were characterized by¹³C NMR measurement and the DEPT technique, as well as by IR spectrometer. The mechanism of grafting reactions was determined from the microstructures of derived graft copolymers. It showed that graft copolymer resulted when BPO was used as initiator of the vinyl monomer polymerization, but not with AIBN. It appeared that the reaction leading to graft formation was direct attack of oligomeric styrene radicals or double bonds of the HTPB. Whereas the graft copolymerization of MMA to HTPB was the same as that suggested in the literature i.e., by a hydrogen abstract reaction.     

Graft copolymerization of methyl acrylate onto silk sericin initiated by tert‐butyl hydroperoxide

A novel redox system, tert‐butyl hydroperoxide (TBHP)–silk sericin (SS), was used to initiate the graft copolymerization of methyl acrylate (MA) onto silk sericin in an aqueous medium. The graft copolymer, consisting of nanoparticles with a fine core–shell structure, was characterized using Fourier transfer infrared spectroscopy. The effects of the concentrations of MA and TBHP, reaction temperature and time on the grafting parameters of the copolymerization were studied in detail. In terms of grafting percentage and grafting efficiency, the optimum reaction conditions were obtained as follows: [MA] = 0.465 mol L^?1, [TBHP] = 3.884 × 10^?4 mol L^?1, T = 80 °C, t = 150 min. Transmission electron microscopy images of the particles showed a core–shell morphology, where poly(methyl acrylate) cores were covered with SS shells. A possible initiation mechanism is proposed. Copyright © 2006 Society of Chemical Industry     

Synthesis of cassava starch‐g‐poly(methyl methacrylate) copolymers with benzoyl peroxide as an initiator

Graft copolymers of cassava starch and methyl methacrylate (MMA) were synthesized by free‐radical polymerization with benzoyl peroxide (BPO) as an initiator in an aqueous medium at 80°C. The formation of graft copolymers was confirmed by analysis of the obtained products with Fourier transform infrared spectroscopy and scanning electron microscopy. The effects of the amount of cassava starch, the amount of MMA monomer, the amount of BPO, and the reaction time on the grafting characteristics were studied. The optimum condition for grafting were obtained when 5 g of cassava starch, 5 g of MMA, 0.1 g of BPO, and a reaction time of 3 h were used. These condition provided a graft copolymer with 25.00% add‐on, 81.40% monomer conversion, 54.30% homopoly(methyl methacrylate) formed, 45.70% grafting efficiency, 37.20% grafting ratio, and 95.54% yield. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 4083–4089, 2006     

Syntheses and properties of N‐vinylpyrrolidione‐g‐EPDM and its modified polymer

The graft copolymerizations of N‐vinylpyrrolidione(NVP) onto ethylene–propylene–diene terpolymer (EPDM) were carried out with benzoyl peroxide (BPO) as an initiator in toluene. The synthesized EPDM‐g‐NVP (ENVP) was characterized by infrared (IR) spectroscopy and gel permeation chromatography (GPC). The effects of initiator and monomer concentrations, reaction time, and temperature were investigated in the graft copolymerization. The highest graft efficiency was obtained at 0.04 mol of NVP, 2 g of EPDM, 2 wt % of BPO and 80°C for 72 h. Modified ENVP (MENVP) was obtained by the reaction of ENVP and KOH in MeOH. Properties of EPDM, ENVP, and MENVP were investigated by a thermogravimetric analyzer (TGA), an instron tensile tester, a Fade‐O‐Meter, and a UV spectrophotometer. Tensile strength and light resistance of ENVP were better than those of MENVP. The dyeability of polymers was increased in following order: MENVP > ENVP > EPDM. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 72: 1177–1184, 1999     

ABS modified with hydrogenated polystyrene‐grafted‐natural rubber

Natural rubber (NR) latex was grafted by emulsion polymerization with styrene monomer, using cumene hydroperoxide/tetraethylene pentamene as redox initiator system. The polystyrene‐grafted NR (PS‐g‐NR) was hydrogenated by diimide reduction in the latex form using hydrazine and hydrogen peroxide with boric acid as a promoter. At the optimum condition for graft copolymerization, a grafting efficiency of 81.5% was obtained. In addition, the highest hydrogenation level of 47.2% was achieved using a hydrazine:hydrogen peroxide molar ratio of 1:1.1. Hydrogenation of the PS‐g‐NR (H(PS‐g‐NR)) increased the thermal stability. Transmission electron microscopy analysis of the H(PS‐g‐NR) particles revealed a nonhydrogenated rubber core and hydrogenated outer rubber layer, in accordance with the layer model. The addition of H(PS‐g‐NR) at 10 wt % as modifier in an acrylonitrile–butadiene–styrene (ABS) copolymer increased the tensile and impact strengths and the thermal resistance of the ABS blends, and to a greater extent than that provided by blending with NR or PS‐g‐NR. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Grafting of N‐carbamyl maleamic acid onto a styrene–butadiene–styrene copolymer

A styrene–butadiene–styrene block copolymer (SBS) was functionalized with N‐carbamyl maleamic acid (NCMA) using two peroxide initiators with the aim of grafting polar groups onto the molecular chains of the polymer. The influence of the concentration of benzoyl peroxide (BPO) and 2,5‐dimethyl, 2,5‐diterbuthylperoxihexane (DBPH) was studied. The concentration of peroxy groups ranged between 0.75 and 6 × 10^?4 mol % while the concentration of NCMA was constant at 1 wt %. The reaction temperature was chosen according to the type of peroxide employed, being 140°C for BPO and 190°C for DBPH. FTIR spectra confirmed that NCMA was grafted onto the SBS macromolecules. It was found that the highest grafting level was achieved at a concentration of peroxy groups of about 3 × 10^?4 mol %. Contact angle measurements were used to characterize the surface of the SBS and modified polymers. The contact angle of water drops decreased with the amount of NCMA grafted from 95°, the one corresponding to the SBS, to about 73°. T‐peel strength of polymer/polyurethane adhesive/polymer joints made with the modified polymers was larger than those prepared with the original SBS. The peel strength of SBS modified with 1.5 and 3 × 10^?4 mol % of peroxy groups from BPO were five times larger than that of the original SBS. The materials modified using BPO showed peel strengths higher than the ones obtained with DBPH. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4468–4477, 2006     

Blends of poly(vinyl chloride) (PVC)/natural rubber‐g‐(styrene‐co‐methyl methacrylate) for improved impact resistance of PVC

To improve the mechanical properties of poly(vinyl chloride) (PVC), the possibility of combining PVC with elastomers was considered. Modification of natural rubber (NR) by graft copolymerization with methyl methacrylate (MMA) and styrene (St) was carried out by emulsion polymerization by using redox initiator to provide an impact modifier for PVC. The impact resistance, dynamic mechanical analysis (DMA), and scanning electron microscopy (SEM) of St and MMA grafted NR [NR‐g‐(St‐co‐MMA)]/PVC (graft copolymer product contents of 5, 10, and 15%) blends were investigated as a function of the amount of graft copolymer product. It was found that the impact strength of blends was increased with an increase of the graft copolymer product content. DMA studies showed that NR‐g‐(St‐co‐MMA) has partial compatibility with PVC. SEM confirmed a shift from brittle failure to ductility with an increase graft copolymer content in the blends. The mechanical properties showed that NR‐g‐(St‐co‐MMA) interacts well with PVC and can also be used as an impact modifier for PVC. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 1666–1672, 2004     

Synthesis and properties of 2-vinylnaphthalene–EPDM–methyl methacrylate graft copolymer

A graft copolymer of 2-vinylnaphthalene (2-VN) and methyl methacrylate (MMA) onto ethylene–propylene–diene terpolymer (EPDM) was synthesized in tetrahydrofuran using benzoyl peroxide. The effects of EPDM content, and ratio of 2-VN to MMA, reaction time, reaction temperature, and initiator concentration in the graft copolymerization were examined. The light resistance, thermal stability, and the tensile properties of the graft copolymer were investigated by using Fade-o-Meter, thermogravimetric analyzer, and tensile tester. It was found that the light resitance and the heat resistance as well as the tensile strength of the graft copolymer are considerably better than those of the acrylonitrile–butadiene–styrene (ABS) copolymer. © 1994 John Wiley & Sons, Inc.     

Synthesis and characterization of solid‐phase graft copolymer of polypropylene with styrene and maleic anhydride

Polypropylene (PP) was modified by solid‐phase graft copolymerization with maleic anhydride (MAH) and styrene (St), using benzoyl peroxide as the initiator and xylene as the interfacial agent. Effects of various factors such as monomer concentration, monomer ratio, initiator concentration on grafting percentage, and acid value were investigated. The graft copolymer was characterized by Fourier transform infrared, pyrolysis gas chromatography—mass spectroscopy, and dynamic mechanical analysis, and the intrinsic viscosity of the extractive from the reaction product was investigated. The results showed that the grafting percentage and acid value of the graft copolymer of PP with two monomers (MAH and St) were considerably higher than those of the graft copolymer of PP with MAH alone. The graft segments were shown to be the copolymer of St and MAH with a substantial molecular weight. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 78: 2482–2487, 2000     

Benzoyl peroxide–p‐acetylbenzylidenetriphenyl arsoniumylide initiated copolymerization of citronellol and styrene

Alternating copolymers, containing styrene and citronellol sequences, have been synthesized by radical polymerization using benzoylperoxide (BPO)–p‐acetylbenzylidenetriphenyl arsoniumylide (pABTAY) as initiator, in xylene at 80 ± 1 °C for 3 h under inert atmosphere. The kinetic expression is R_p ∝ [BPO]^0.88 [citronellol]^0.68 [styrene]^0.56 with BPO and R_p ∝ [pABTAY]^0.27 [citronellol]^0.76 [styrene]^0.63 with pABTAY, ie the system follows non‐ideal kinetics in both cases, because of primary radical termination and degradative chain transfer reactions. The activation energy with BPO and pABTAY is 94 kJ mol^?1 and 134 kJ mol^?1, respectively. Different spectral techniques, such as IR, FTIR, ¹H NMR and ¹³C NMR, have been used to characterize the copolymer, demonstrating the presence of alcoholic and phenyl groups of citronellol and styrene. The alternating nature of the copolymer is shown by the product of reactivity ratios r₁ (Sty) = 0.81 and r₂ (Citro) = 0.015 using BPO and r₁ (Sty) = 0.37 and r₂ (Citro) = 0.01 using (pABTAY), which are calculated by the Finemann–Ross method. A mechanism of copolymerization is proposed. © 2001 Society of Chemical Industry     

Homogeneous graft copolymerization of acrylonitrile onto high α‐cellulose in a dimethyl acetamide and lithium chloride solvent system

Homogeneous graft copolymerization of acrylonitrile (AN) monomer onto high α‐cellulose was investigated in a lithium chloride/N,N‐dimethyl acetamide (DMAc/LiCl) solvent system. Benzoyl peroxide (BPO) and azobisisobutyronitrile (AIBN) were used as radical initiators. By varying temperature, time, and monomer concentrations in grafting reactions, the optimum conditions for both initiator systems were fixed. The graft yield for the AN–BPO system was higher than that for the AN–AIBN system. The optimum conditions of reactions were at temperatures of 70 and 60°C with initiator concentrations of 0.4% (0.36 mmol) and 2% (1.24 mmol) for the AN–AIBN and AN–BPO systems, respectively, at a monomer concentration of 5% (14.1 mmol) solution. The number of grafts per cellulose chain was in the range from 2.2 to 1.1 for AN–BPO and 0.5 to 2.1 for the AN–AIBN system. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 630–637, 2003