Hamilton体系下含弱粘接复合材料层合板的无网格求解方法

该文结合径向基点插值函数、弹簧层模型和弹性材料修正后的H-R（Hellinger-Reissner）变分原理,推导了含弱粘接复合材料层合板控制方程的无网格列式。利用典型径向基函数Multiquadric（MQ）,计算了含弱粘接复合材料层合板的应力与位移。通过与精确法的对比,证明了控制方程无网格列式的正确性,并研究了弱粘...     

A three-dimensional semi-analytical model for the composite laminated plates with a stepped lap repair

A three-dimensional semi-analytical model of the static response and sensitivity analysis was established based on the state space methods and meshless method for the composite laminated plates with a stepped lap repair. Firstly, the meshfree formulations of Hamilton canonical equation and the linear spring-layer were deduced by the radial point interpolation method (RPIM) shape functions and the modified Hellinger–Reissner (H–R) variational principle of elastic solids. And then a three-dimensional hybrid governing equation of the static response analysis and sensitivity analysis were developed for the composite laminated plates with a stepped lap repair. The present three-dimensional semi-analytical model with no initial assumptions regarding displacement and stress accounts for the transverse shear deformation and rotary in the governing equation of structure. By using the hybrid governing equation in the response analysis and sensitivity analysis, the convoluted algorithm can be avoided in sensitivity analysis, and the response quantities and the sensitivity coefficients can be obtained simultaneously.     

Behavior of laminated sandwich plates having interfacial imperfections by a new refined element

The static response of laminated sandwich plates having imperfections at the layer interfaces is investigated by a refined plate theory. The plate theory represents parabolic through thickness variation of transverse shear stresses, which are continuous at the layer interfaces and become zero at the plate top and bottom surfaces. In this plate model the interfacial imperfection is represented by a linear spring-layer. Moreover, with all these features of an accurate modeling, it involves unknowns only at the reference plane of the plate. To have generality in the analysis, finite element method is adopted. But any existing plate element cannot be used, as the plate theory demands certain inter-elemental continuity. Thus an attempt has also been made to develop a new triangular element. As there is no published result on imperfect sandwich plates, the problems of perfect sandwich plates and ordinary laminated plate with inter-laminar imperfection are used for validation.     

Stiffened plate bending analysis in terms of refined triangular laminated plate element

Based on the higher-order global–local theories, a finite element model is proposed to study the bending behavior of stiffened laminated plates. The proposed model treats the embedded stiffeners as the part of laminated plate, so that the compatibility of displacements and stresses between the plate and the stiffeners can be automatically satisfied. Distributions of the displacements and stresses through the thickness of laminates were also given for the first time, which can serve as references for future investigations as such information is lacking in the published literature. In addition, the impact of the stiffeners on the bending response of the stiffened laminated plates is also studied in terms of the quantity, the collocation and the geometry of stiffeners. Numerical results showed that the higher-order global–local theories are more suitable for predicting the bending response of thick and moderately thick stiffened laminated plates compared to the first order theory commonly used in engineering. By varying the quantity, the collocation and the geometry of stiffeners, the stiffness and the strength of stiffened laminated plates can be remarkably improved.     

An extended layerwise/solid-element method of stiffened composite plates with delaminations and transverse crack

The stiffened composite plates with the transverse crack and delamination were studied in this paper, and an extended layerwise/solid-element (XLW/SE) method was developed. In the proposed method, the governing equations of composite plates and stiffeners were established based on the extended layerwise method and 3D solid elements, respectively. The final governing equation of stiffened composite plates is assembled by using the compatibility conditions and internal force equilibrium conditions at the joint interface between the plates and stiffeners. For the stiffened composite plates with damages, the XLW/SE method can obtain the local stress and displacement fields accurately and simulate the in-plane transverse cracks and delaminations simultaneously, considering complicated stiffeners without any assumptions. In the numerical examples, the results obtained by the proposed method are compared with those obtained by the 3D elastic models developed in the general finite element code, and the good agreements were achieved for the stiffened composite plates with/without delaminations and/or transverse crack.     

四边简支压电层合板灵敏度分析的精确解

为了应用弹性力学中的Hamilton 正则方程研究压电材料的灵敏度系数问题,基于压电材料的H-R(Hellinger-Reissner) 变分原理,简要地导出Hamilton正则方程算子表达式,建立了四边简支板静力学控制方程。根据灵敏度定义,在静力学控制方程的基础上联立灵敏度控制方程,得到了增维的齐次压电材料静力响应和灵敏度系数混合控制方程。应用该方程可以同时求得压电层合板的力学、电学参量及其灵敏度。该算法过程简单、运算效率和稳定性好。数值算例结果与有限差分法的结果比较表明本文方法切实有效。      

Finite element analysis of stiffened laminated plates under transverse loading

A finite element model is developed to study the behavior of stiffened laminated plates under transverse loadings. Transverse shear flexibility is incorporated in both beam and plate displacement fields. A laminated plate element with 45 degrees of freedom is used in conjunction with a laminated beam element having 12 degrees of freedom for the bending analysis of eccentrically-stiffened laminated plates. The validity of the formulation is demonstrated by comparing with the available solutions in the literature. The numerical results are presented for eccentrically-stiffened layered plates having various boundary conditions and with stiffeners varying in number.     

阻尼夹芯复合材料加筋板的振动分析与数值模拟

以阻尼夹芯复合材料加筋板为研究对象,依据一阶剪切变形理论(FSDT)和Hamilton原理,推导板和加强筋的应变能、动能表达式,采用变分原理建立控制微分方程,根据相关边界条件和傅里叶级数求解方程。建立了ANSYS阻尼夹芯复合材料加筋板的有限元模型,该模型考虑到阻尼夹芯复合材料加筋板中阻尼材料与纤维预浸料间的结合方式,用模态应变能有限元数值模拟方法研究了结构的动力学性能,并通过对数值模拟结果与理论解的比较,验证了模型的合理性和有效性。探讨了不同的筋条尺寸、不同的筋条数量、不同的筋条分布方式对阻尼夹芯复合材料加筋板动力学性能的影响,得出了阻尼夹芯复合材料加筋板的一阶模态频率和损耗因子随不同参数的变化曲线,其结论为阻尼夹芯复合材料加筋板的优化设计提供参考。     

A new finite element for buckling analysis of laminated stiffened plates

A new stiffened plate element for stability analysis of laminated stiffened plates has been presented. The basic plate element is a combination of Allman's plane stress triangular element and a Discrete Kirchhoff–Mindlin plate bending element. The element includes transverse shear effects. The model accommodates any number of arbitrarily oriented stiffeners within the plate element and eliminates constraints on the mesh division of the plate. The element has no problem associated with shear locking – a phenomenon usually encountered in isoparametric elements. The stability analysis of laminated stiffened plates has been carried out under different loading conditions with the present element.     

Effects of Interfacial Damage on the Global and Local Static Response of Cross-Ply Laminates

The problem of the implications of interfacial damage on the local and global static response of cross-ply laminated flat structures is addressed in this paper. As a basic prerequisite, a third-order generalized zig-zag nonlinear plate theory incorporating the effect of interfacial damage is used. The theory rests upon a representation of the displacement field which: (i) fulfills a priori the shear traction continuity conditions at each interface of the laminate and the free shear traction conditions on the top and bottom external planes of the plate, (ii) satisfies the requirement of continuous displacements at the perfectly bonded interfaces, and (iii) incorporates the interfacial tangential displacement jump condition when slip-type interlayer imperfections are present. The theory also incorporates the geometrical nonlinearities and the thermal effects. Numerical results highlighting the effect of interfacial damage on the static response of laminated composite plates in cylindrical bending are displayed and conclusions on their implications upon their load-carrying capacity are outlined. This revised version was published online in July 2006 with corrections to the Cover Date.     

具有初始几何缺陷加劲板的动态屈曲

针对工程中常用的加劲板,研究了动态屈曲的求解方法。将加劲板分为母板与加劲肋两个部分考虑,其中母板按经典薄板理论计算,加劲肋视为Euler梁。假定加劲板的位移,利用Hamilton原理结合系统能量和振型叠加法建立了加劲板的动态屈曲特征方程。最后,选择四边简支加劲板进行数值分析,分析中考虑初始几何缺陷的影响,并讨论了初始几何缺陷、加劲肋的数量及其刚度的变化对动态屈曲临界荷载的影响。结果表明：一阶模态的初始几何缺陷对加劲板的临界荷载影响很大,而增加加劲肋的数量及其刚度可以提高加劲板的抗动态屈曲能力。研究结果也为加劲板的结构设计方法提供一定的参考。     

厚度不连续悬臂梁板的自由振动分析

将厚度不连续梁板视为层合板, 分别应用Hamilton 正则方程半解析法建立每一层的线性方程。考虑到每两层连接界面上应力和位移的连续性, 联立各层的方程得到整个结构的特征方程, 其主要的优越性表现为: 控制方程不限制不连续梁板的厚度, 并能适合处理厚度不对称且不连续的层合板。本文中的方法可修改或扩展用来分析加筋压电材料层合板或带有压电材料传感器和驱动器块的板壳等问题。      

一类双壳结构振动特性的半解析法

以Hamilton正则方程的半解析法为基础,为一类双壳结构的振动特性提出了一种新的数学模型。基本步骤:(1)独立地建立内外壳和连接筋的线性方程组;(2)考虑到内外壳和连接筋的界面上的应力和位移的连续性,联立内外壳和连接筋的方程,从而得到全结构的方程组。主要优点是:采用了同一种Hamiltonian等参元离散壳和连接筋,结构的转动惯性、剪切变形等因素都得到了考虑,而且不限制壳的厚度和筋的高度;该方法象一般的有限元法一样适应复杂的边界条件和由多种材料构成的结构。本文的方法可推广用来研究加筋复合材料或加筋压电材料层合壳及相应的双壳结构的动力学问题。     

Nonlinear dynamic response of laminated plates resting on nonlinear elastic foundations by the discrete singular convolution-differential quadrature coupled approaches

In this paper, nonlinear dynamic response of rectangular laminated composite plate resting on nonlinear Pasternak type elastic foundations is investigated. First-order shear deformation theory (FSDT) is used for modeling of moderately thick plates. The plate formulation is based on the von Karman nonlinear equation. The resulting nonlinear governing equations for transient analysis of laminated plates on elastic foundation are integrated using the discrete singular convolution-differential quadrature coupled approaches. The nonlinear governing equations of motion of plate are discretized in space and time domains using the discrete singular convolution and the differential quadrature methods, respectively. The validity of the present method is demonstrated by comparing the present results with those available in the open literature. The effects of the foundation parameters, boundary conditions and geometric parameters of plates on nonlinear dynamic response of laminated thick plates are investigated.     

Buckling response of laminated composite stiffened plates subjected to partial in-plane edge loading

This article presents the buckling analysis of laminated composite stiffened plates subjected to partial in-plane edge loading. The finite element method is used to carry out the analysis. The eight-noded isoparametric degenerated shell element with C⁰ continuity and first-order shear deformation and a compatible three-noded curved beam element are used to model the plate skin and the stiffeners, respectively. The eigen value analysis is carried out to track the buckling load. The convergence study is performed for some specific problems and the results are compared with the available results in the literature. It is observed that the convergence of results is very fast for this finite element model. Effect of different parameters like orientation of fibers, number of layers, and loading types are considered in the present investigation. It is also observed that all these parameters have significant effect on the buckling response of the composite stiffened plate.     

Dynamic buckling of a laminated composite stringer–stiffened cylindrical panel

The present study deals with the “dynamic buckling” of a laminated composite stringer–stiffened curved panel. The “dynamic buckling”, in the present study, is concerned with the unbounded lateral response of the panel, which is subjected to an axial impact load.In reinforced panels with widely spaced adequately stiff stringers, the structure may pass through two major states before its total collapse: buckling of the panel skin between stiffeners and buckling of the stiffeners themselves. This study focuses on the lowest buckling load of the stringer–stiffened panel, which is, buckling of the panel skin between stiffeners.The analysis of the laminated composite stringer–stiffened cylindrical panel was performed by using the commercial ANSYS finite element software. The model simulates the structure and its associated boundary conditions. The boundary conditions simulate the stringer–stiffened cylindrical panel as a part of a fuselage. The static buckling analysis was performed using the eigenvalue buckling approach to determine the static critical load. Modal analysis was used to calculate the first natural frequency and corresponding mode shape of the structure. Nonlinear transient dynamic analysis was used to determine the dynamic critical load. In the transient dynamic analysis the Newmark method with the Newton–Raphson scheme were used.In the present study, the equation of motion approach was applied. By this approach, the equations of motion were numerically solved for various load parameter values (loading amplitude and loading duration) to obtain the system response. Special attention was given to the neighborhood of loading durations corresponding to the period of the lowest bending frequency of the skin.For each load duration, the dynamic buckling load was calculated using a load versus lateral displacement curve generated by the ANSYS code.The results were plotted on a dynamic load amplification factor (DLF) graph. The DLF is defined, as the ratio of the dynamic buckling to the static buckling of the panel. For loading periods in the neighborhood of the lowest natural frequency of the panel, the DLF was less than unity. It means that, for those particular loading periods, the dynamic buckling load is lower than the static one.     

Nonlinear static response of laminated composite plates by discrete singular convolution method

In this paper, large deflection analysis of laminated composite plates is analysed. Nonlinear governing equation for bending based on first-order shear deformation theory (FSDT) in the von Karman sense is presented. These equations have been solved by the method of discrete singular convolution (DSC). Regularized Shannon’s delta (RSD) kernel and Lagrange delta sequence (LDS) kernel are selected as singular convolution to illustrate the present algorithm. The effects of plate aspect ratio, fiber orientation, boundary conditions, thickness-to-side ratio, and applied load on the nonlinear static response of the laminated plate are investigated.     

Finite-Element Analysis of Laminated Stiffened Cylindrical Shallow Shell

A finite-element solution for a geometrically nonlinear fiber composite shallow shell with Stringer-type stiffeners is presented. A laminated, anisotropic thin/thick shallow stiffened shell finite element is developed and applied for the solution of several static problems. Geometrically, a nonlinear finite-element model is based on the nonlocking shear deformable theory. Stiffened composite cylinders are subjected to mechanical loading and the shallow shell theory is used for the geometric representation and formulation of the axially stiffened cylinders. A new, two-sided meshing system is generated to represent a cylindrical shell with stiffeners in a three-dimensional coordinate system.     

复合材料层合板屈曲稳定性优化设计及其灵敏度计算方法

笔者在有限元分析基础上研究了以屈曲稳定性作为约束条件或优化目标的复合材料层合板结构优化设计及其灵敏度分析方法,重点讨论了屈曲临界荷载灵敏度对内力场和载荷的依赖关系及其在铺层优化、尺寸优化和形状优化问题中的不同计算方法,并在JIFEX软件中实现了复杂结构复合材料层合板优化设计方法。数值算例验证了本文算法和程序的有效性。     

复合材料加筋板的动力分析

本文构造了九自由度三角形拟协调罚函数复合材料板单元与六自由度复合材料梁单元,考虑了剪切变形与转动惯量的影响。用这两种单元对复合材料加筋板的自由振动、阻尼特性和瞬态响应问题进行了研究,给出一些有益结果。