首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 718 毫秒
1.
针对具有参数不确定性和未知外部干扰的机械手轨迹跟踪问题提出了一种多输入多输出自适应鲁棒预测控制方法. 首先根据机械手模型设计非线性鲁棒预测控制律, 并在控制律中引入监督控制项; 然后利用函数逼近的方法逼近控制律中因模型不确定性以及外部干扰引起的未知项. 理论证明了所设计的控制律能够使机械手无静差跟踪期望的关节角轨迹. 仿真验证了本文设计方法的有效性.  相似文献   

2.
This article presents a robust tracking controller for an uncertain mobile manipulator system. A rigid robotic arm is mounted on a wheeled mobile platform whose motion is subject to nonholonomic constraints. The sliding mode control (SMC) method is associated with the fuzzy neural network (FNN) to constitute a robust control scheme to cope with three types of system uncertainties; namely, external disturbances, modelling errors, and strong couplings in between the mobile platform and the onboard arm subsystems. All parameter adjustment rules for the proposed controller are derived from the Lyapunov theory such that the tracking error dynamics and the FNN weighting updates are ensured to be stable with uniform ultimate boundedness (UUB).  相似文献   

3.
Robust tracking control for rigid robotic manipulators   总被引:2,自引:0,他引:2  
The problem of robust tracking control using a nominal feedback controller and a variable structure compensator for a rigid robotic manipulator with uncertain dynamics is addressed in this note. It is shown that the effects of large system uncertainties can be eliminated and asymptotic convergence of the output tracking error can be guaranteed by using a variable structure compensator in the closed loop feedback control system for the rigid robotic manipulator  相似文献   

4.
为实现对多自由度机械臂关节运动精确轨迹跟踪,提出一种基于非线性干扰观测器的广义模型预测轨迹跟踪控制方法。针对机械臂轨迹跟踪运动学子系统,采用广义预测控制(Generalized Predictive Control,GPC)方法设计期望的虚拟关节角速度。对于机械臂轨迹跟踪动力学子系统,考虑机械臂的参数不确定性和未知外界扰动,利用GPC方法设计关节力矩控制输入,基于非线性干扰观测器方法实时估计和补偿系统模型中的不确定性。在李雅普诺夫稳定性理论框架下证明了机械臂关节角位置和角速度的跟踪误差最终收敛于零的小邻域。数值仿真验证了所提出控制方法的有效性和优越性。  相似文献   

5.
本文提出了一种基于约束预测控制的机械臂实时运动控制方法.该控制方法分为两层,分别设计了约束预测控制器和跟踪控制器.其中,约束预测控制器在考虑系统物理约束的条件下,在线为跟踪控制器生成参考轨迹;跟踪控制器采用最优反馈控制律,使机械臂沿参考轨迹运动.为了简化控制器的设计和在线求解,本文采用输入输出线性化的方式简化机械臂动力学模型.同时,为了克服扰动,在约束预测控制器中引入前馈策略,提出了带前馈一反馈控制结构的预测控制设计.因此,本文设计的控制器可以使机械臂在满足物理约束的条件下快速稳定地跟踪到目标位置.通过在PUMA560机理模型上进行仿真实验,验证了预测控制算法的可行性和有效性.  相似文献   

6.
In this paper, a stable adaptive fuzzy-based tracking control is developed for robot systems with parameter uncertainties and external disturbance. First, a fuzzy logic system is introduced to approximate the unknown robotic dynamics by using adaptive algorithm. Next, the effect of system uncertainties and external disturbance is removed by employing an integral sliding mode control algorithm. Consequently, a hybrid fuzzy adaptive robust controller is developed such that the resulting closed-loop robot system is stable and the trajectory tracking performance is guaranteed. The proposed controller is appropriate for the robust tracking of robotic systems with system uncertainties. The validity of the control scheme is shown by computer simulation of a two-link robotic manipulator.  相似文献   

7.
李桂秋  陈志旺 《计算机应用》2012,32(6):1707-1712
为了使机械手系统在含有模型不确定项时具有良好的跟踪性能和较强的抗干扰能力,提出了一种间接自适应鲁棒预测控制。首先,针对机械手模型设计出非线性鲁棒预测控制器;然后,基于三次样条函数逼近控制律中因模型不确定性产生的未知项,并在控制律中引入一个D-控制项抑制外部干扰。理论证明了所设计的控制器能够使跟踪误差收敛到原点。仿真验证了所提方法的有效性。  相似文献   

8.
机械手的模糊逆模型鲁棒控制   总被引:3,自引:0,他引:3  
提出一种基于模糊聚类和滑动模控制的模糊逆模型控制方法,并将其应用于动力学 方程未知的机械手轨迹控制.首先,采用C均值聚类算法构造两关节机械手的高木-关野 (T-S)模糊模型,并由此构造模糊系统的逆模型.然后,在提出的模糊逆模型控制结构中, 离散时间滑动模控制和时延控制(TDC)用于补偿模糊建模误差和外扰动,保证系统的全局 稳定性并改进其动态和稳态性能.系统的稳定性和轨迹误差的收敛性可以通过稳定性定理来 证明.最后,以两关节机械手的轨迹跟随控制为例,揭示了该设计方法的控制性能.  相似文献   

9.
利用广义模糊双曲正切模型的全局逼近特点,设计一种模糊自适应控制器用于机器人轨迹跟踪控制.广义双曲正切模型利用输入变量的平移能以任意精度逼近系统的不确定动态.对于系统不确定外界干扰和模糊系统的逼近误差,通过求解一个线性矩阵不等式来保证闭环系统的鲁棒稳定性.对比传统的模糊基函数,在保证系统跟踪精度的前提下,双曲正切模糊基函数的自适应调整参数大大减少,仿真表明该控制算法具有较强的鲁棒性能和较好的跟踪性能.  相似文献   

10.
This paper extends tube‐based model predictive control of linear systems to achieve robust control of nonlinear systems subject to additive disturbances. A central or reference trajectory is determined by solving a nominal optimal control problem. The local linear controller, employed in tube‐based robust control of linear systems, is replaced by an ancillary model predictive controller that forces the trajectories of the disturbed system to lie in a tube whose center is the reference trajectory thereby enabling robust control of uncertain nonlinear systems to be achieved. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

11.
A robust tracking control design of robot systems including motor dynamics with parameter perturbation and external disturbance is proposed in this study via adaptive fuzzy cancellation technique. A minimax controller equipped with a fuzzy-based scheme is used to enhance the tracking performance in spite of system uncertainties and external disturbance. The design procedure is divided into three steps. At first, a linear nominal robotic control design is obtained via model reference tracking with desired eigenvalue assignment. Next, a fuzzy logic system is constructed and then tuned to eliminate the nonlinear uncertainties as possibly as it can to enhance the tracking robustness. Finally, a minimax control scheme is specified to optimally attenuate the worst-case effect of both the residue due to fuzzy cancellation and external disturbance to achieve a minimax tracking performance. In addition, an adaptive fuzzy-based dynamic game theory is introduced to solve the minimax tracking problem. The proposed method is appropriate for the robust tracking design of robotic systems with large parameter perturbation and external disturbance. A simulation example of a two-link robotic manipulator driven by DC motors is also given to demonstrate the effectiveness of proposed design method's tracking performance  相似文献   

12.
A robust controller is proposed to achieve accurate tracking for a class of nonlinear uncertain robot manipulators with actuator dynamics. A dynamic model is derived that incorporates the manipulator dynamics with the actuator dynamics. The parameter uncertainty in the model is quantified using the linear parameterization technique. The proposed switching controller guarantees the global asymptotic stability. To rectify the chattering caused by the switching action of the controller, the controller is modified into a smoothed form by putting a boundary layer around the sliding surface. It is shown that the smoothing controller guarantees the uniform ultimate boundedness of the actual trajectory. Simulation results show the feasibility and excellent tracking performance of the controller.  相似文献   

13.
This paper provides a solution to the problem of robust output feedback model predictive control of constrained, linear, discrete-time systems in the presence of bounded state and output disturbances. The proposed output feedback controller consists of a simple, stable Luenberger state estimator and a recently developed, robustly stabilizing, tube-based, model predictive controller. The state estimation error is bounded by an invariant set. The tube-based controller ensures that all possible realizations of the state trajectory lie in a simple uncertainty tube the ‘center’ of which is the solution of a nominal (disturbance-free) system and the ‘cross-section’ of which is also invariant. Satisfaction of the state and input constraints for the original system is guaranteed by employing tighter constraint sets for the nominal system. The complexity of the resultant controller is similar to that required for nominal model predictive control.  相似文献   

14.
基于模糊变结构的机械臂控制   总被引:7,自引:0,他引:7  
现有的机械臂模糊变结构控制方法大都计算复杂或需要检测滑模面的微分信号.本文将机械臂模型分为确定部分和不确定部分进行研究,对确定部分采用一般反馈控制,对不确定部分采用变结构集中补偿控制,为了消除变结构控制器的抖震引入模糊控制方法,将滑模面作为模糊控制器的输入,补偿控制器权值作为输出.本方案不仅不需要检测滑模面微分信号,而且计算简单,易于实现.仿真结果表明,在存在模型误差和外部扰动的情况下,该方案既能达到快速跟踪,又能很好的消除控制器的抖震.  相似文献   

15.
In this paper, a robust adaptive terminal sliding mode controller is developed for n-link rigid robotic manipulators with uncertain dynamics. An MIMO terminal sliding mode is defined for the error dynamics of a closed loop robot control system, and an adaptive mechanism is introduced to estimate the unknown parameters of the upper bounds of system uncertainties in the Lyapunov sense. The estimates are then used as controller parameters so that the effects of uncertain dynamics can be eliminated and a finite time error convergence in the terminal sliding mode can be guaranteed. Also, a useful bounded property of the derivative of the inertial matrix is explored, the convergence rate of the terminal sliding variable vector is investigated, and an experiment using a five bar robotic manipulator is carried out in support of the proposed control scheme.  相似文献   

16.
This article presents a new approach to trajectory tracking control of uncertain rigid manipulators using only position measurements. The proposed control strategy is an adaptive scheme that is very general and computationally efficient, requires virtually no information regarding the manipulator dynamic model, and is implementable without calculation of the robot inverse dynamics or inverse kinematic transformations. It is shown that the controller ensures semiglobal uniform boundedness of all signals in the presence of bounded disturbances, and that the ultimate size of the tracking errors can be made arbitrarily small. Additionally, it is demonstrated that the proposed strategy can be used as the basis for developing controllers for “cascaded” robotic systems, such as manipulators with significant actuator dynamics or joint flexibility. The efficacy of this approach to manipulator control is illustrated through both computer simulations and hardware experiments. © 1997 John Wiley & Sons, Inc.  相似文献   

17.
The ever increasingly stringent performance requirements of industrial robotic applications highlight significant importance of advanced robust control designs for serial robots that are generally subject to various uncertainties and external disturbances. Therefore, this paper proposes and investigates the design and implementation of a robust adaptive fuzzy sliding mode controller in the task space for uncertain serial robotic manipulators. The sliding mode control is well known for its robustness to system parameter variations and external disturbances, and is thus a highly desirable and cost-effective approach to achieve high precision control task for serial robots. The proposed controller is designed based on a fuzzy logic approximation to accomplish trajectory tracking with high accuracy and simultaneously attenuate effects from uncertainties. In the controller, the high-frequency uncertain term is approximated by using a fuzzy logic system while the low-frequency term is adaptively updated in real time based on a parametric adaption law. The control efficacy and effectiveness of the proposed control algorithm are comparatively verified against a recently proposed conventional controller. The test results demonstrate that the proposed controller has better trajectory tracking performances and is more robust against large disturbances than the conventional controller under the same operating conditions.  相似文献   

18.
This paper presents methodologies for dynamic modeling and trajectory tracking of a nonholonomic wheeled mobile manipulator (WMM) with dual arms. The complete dynamic model of such a manipulator is easily established using the Lagrange’s equation and MATHEMATICA. The structural properties of the overall system along with its subsystems are also well investigated and then exploited in further controller synthesis. The derived model is shown valid by reducing it to agree well with the mobile platform model. In order to solve the path tracking control problem of the wheeled mobile manipulator, a novel kinematic control scheme is proposed to deal with the nonholonomic constraints. With the backstepping technique and the filtered-error method, the nonlinear tracking control laws for the mobile manipulator system are constructed based on the Lyapunov stability theory. The proposed control scheme not only achieves simultaneous trajectory and velocity tracking, but also compensates for the dynamic interactions caused by the motions of the mobile platform and the two onboard manipulators. Simulation results are performed to illustrate the efficacy of the proposed control strategy.  相似文献   

19.
This paper considers the trajectory tracking problem for uncertain robot manipulators subject to external disturbance torques. The external disturbance torques are assumed to be unknown and time-varying. We present a disturbance observer-based controller which estimates the lumped disturbance (the external disturbance torque combined with the effect of plant uncertainties), and compensates it so that the overall closed-loop system behaves like the nominal closed-loop system that is composed of the nominal model of robot manipulator and the feedback linearization-based tracking controller. A simplified implementation of the proposed controller is also introduced. Simulation results on a robot manipulator are given to validate the performance of the proposed controller.  相似文献   

20.
This paper presents an adaptive nonsingular terminal sliding mode (NTSM) tracking control design for robotic systems using fuzzy wavelet networks. Compared with linear hyperplane-based sliding control, terminal sliding mode controller can provide faster convergence and higher precision control. Therefore, a terminal sliding controller combined with the fuzzy wavelet network, which can accurately approximate unknown dynamics of robotic systems by using an adaptive learning algorithm, is an attractive control approach for robots. In addition, the proposed learning algorithm can on-line tune parameters of dilation and translation of fuzzy wavelet basis functions and hidden-to-output weights. Therefore, a robust control law is used to eliminate uncertainties including the inevitable approximation errors resulted from the finite number of fuzzy wavelet basis functions. The proposed controller requires no prior knowledge about the dynamics of the robot and no off-line learning phase. Moreover, both tracking performance and stability of the closed-loop robotic system can be guaranteed by Lyapunov theory. Finally, the effectiveness of the fuzzy wavelet network-based control approach is illustrated through comparative simulations on a six-link robot manipulator  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号