Glass-Free Zn2Te3O8 Microwave Ceramic for LTCC Applications

A Zn₂Te₃O₈ ceramic was investigated as a promising dielectric material for low-temperature co-fired ceramics (LTCC) applications. The Zn₂Te₃O₈ ceramic was synthesized using the solid-state reaction method by sintering in the temperature range 540°–600°C. The structure and microstructure of the compounds were investigated using X-ray diffraction (XRD) and scanning electron microscopy methods. The dielectric properties of the ceramics were studied in the frequency range 4–6 GHz. The Zn₂Te₃O₈ ceramic has a dielectric constant (ɛ_r) of 16.2, a quality factor ( Q _u× f ) of 66 000 at 4.97 GHz, and a temperature coefficient of resonant frequency (τ_f) of −60 ppm/°C, respectively. Addition of 4 wt% TiO₂ improved the τ_f to −8.7 ppm/°C with an ɛ_r of 19.3 and a Q _u× f of 27 000 at 5.14 GHz when sintered at 650°C. The chemical reactivity of the Zn₂Te₃O₈ ceramic with Ag and Al metal electrodes was also investigated.     

Synthesis of BaCu(B2O5) Ceramics and their Effect on the Sintering Temperature and Microwave Dielectric Properties of Ba(Zn1/3Nb2/3)O3 Ceramics

BaCu(B₂O₅) ceramics were synthesized and their microwave dielectric properties were investigated. BaCu(B₂O₅) phase was formed at 700°C and melted above 850°C. The BaCu(B₂O₅) ceramic sintered at 810°C had a dielectric constant (ɛ_r) of 7.4, a quality factor ( Q × f ) of 50 000 GHz and a temperature coefficient of resonance frequency (τ_f) of −32 ppm/°C. As the BaCu(B₂O₅) ceramic had a low melting temperature and good microwave dielectric properties, it can be used as a low-temperature sintering aid for microwave dielectric materials for low temperature co-fired ceramic application. When BaCu(B₂O₅) was added to the Ba(Zn_1/3Nb_2/3)O₃ (BZN) ceramic, BZN ceramics were well sintered even at 850°C. BaCu(B₂O₅) existed as a liquid phase during the sintering and assisted the densification of the BZN ceramic. Good microwave dielectric properties of Q × f =16 000 GHz, ɛ_r=35, and τ_f=22.1 ppm/°C were obtained for the BZN+6.0 mol% BaCu(B₂O₅) ceramic sintered at 875°C for 2 h.     

Dielectric Properties of Ceramics in Ba (Co1/3 Nb2/3)O3–Ba(Zn1/3Nb2/3)O3 Solid Solution

The dielectric properties of the Ba (Co_1/3 Nb_2/3)O₃–Ba(Zn_1/3Nb_2/3)O₃ system were determined. Ba (Co_1/3 Nb_2/3)O₃–Ba(Zn_1/3Nb_2/3)O₃ has a complex perovskite structure, a high dielectric constant, a low dielectric loss, and a low temperature coefficient of the resonant frequency. A solid-solution ceramic with 0.7Ba (Co_1/3 Nb_2/3)O₃·0.3 Ba(Zn_1/3Nb_2/3)O₃ has a dielectric constant of K=33.5, Q=11000 at 6.5 GHz, and a temperature coefficient of the resonant frequency of τ_f=0 ppm/°C. The temperature coefficient of resonant frequency can be varied by changing the composition. The Q values of the ceramics can be increased by annealing in a nitrogen atmosphere. These ceramics can be used for resonant elements and stabilized oscillators.     

Influence of Non-Stoichiometry on the Structure and Properties of Ba(Zn1/3Nb2/3)O3 Microwave Dielectrics. IV. Tuning τf and the Part Size Dependence of Q×f

High Q ceramics of Ba₃W₂O₉ (BW)-substituted Ba(Zn_1/3Nb_2/3) O₃ (BZN) were prepared with a zero τ_f through the partial substitution of Zn by Ni and Co. The small concentrations of B-site vacancies introduced by the substitution of BW accelerated the kinetics and stability of the cation ordering and lowered the sintering temperature. Dense, zero τ_f, ordered solid solutions such as 0.99Ba(Zn_0.3Co_0.7)_1/3Nb_2/3O₃–0.01BW with ɛ_r=34.4 and Q × f =82 000 at ∼8 GHz could be obtained after sintering at 1380°C for 5 h and annealing at 1300°C for 24 h. Partially ordered ceramics in the Zn/Co and Zn/Ni solid solutions show a large gradient in the ordering throughout the pellets, which produces a resonant frequency dependence of their Q × f value. The ordering gradient is associated with the increased constraints on the growth of the 1:2 ordered structure within the interior of larger and thicker pellets and can be minimized by extended annealing.     

Microwave Dielectric Properties of Low-Fired Ba5Nb4O15

The effect of B₂O₃ on the sintering temperature and microwave dielectric properties of Ba₅Nb₄O₁₅ has been investigated using X-ray powder diffraction, scanning electron microscopy, and a network analyzer. Interactions between Ba₅Nb₄O₁₅ and B₂O₃ led to formation of second phases, BaNb₂O₆ and BaB₂O₄. The addition of B₂O₃ to Ba₅Nb₄O₁₅ resulted in lowering the sintering temperature from 1400° to 925°C. Low-fired Ba₅Nb₄O₁₅ could be interpreted by measuring changes in the quality factor ( Q × f ), the relative dielectric constant (ɛ_r), and the temperature coefficient of resonant frequency (τ_f) as a function of B₂O₃ additions. More importantly, the formation of BaNb₂O₆ provided temperature compensation. The microwave dielectric properties of low-fired Ba₅Nb₄O₁₅ had good dielectric properties: Q × f = 18700 GHz, ɛ_r= 39, and τ_f= 0 ppm/°C.     

Titanium Incorporation in Zn2TiO4 Spinel Ceramics

Compositions in the Zn₂TiO₄+ x TiO₂ system ( x = 0–0.43) were synthesized via the solid-state reaction route, using high-purity (≥99.99%) metal-oxide powders. The incorporation of titanium, in the form of TiO₂, in Zn₂TiO₄ spinel ceramics was investigated by analyzing the crystal structure and measuring the dielectric properties. The results of the crystal structure analyses suggested that TiO₂ levels of x ≤ 0.33 could be incorporated into the Zn₂TiO₄ spinel at temperatures of T > 945°C, whereas the solid solubility of titanium in Zn₂TiO₄ decreased for T < 945°C. When x ≥ 0.28, the Zn₂Ti₃O₈ phase formed in the Zn₂TiO₄ grain interior while cooling after heat treatment. Measurement of the microwave dielectric properties also supported the conclusion that the solubility limit of titanium in Zn₂TiO₄ was close to x = 0.33, as determined through analysis of the crystal structure.     

Fabrication and Electrical Properties of Textured Sr0.53Ba0.47Nb2O6 Ceramics by Templated Grain Growth

Textured Sr_0.53Ba_0.47Nb₂O₆ ceramics with a relative density of >95% were fabricated using templated grain growth (TGG). Acicular KSr₂Nb₅O₁₅ template particles synthesized via a molten salt process were aligned by tape casting in a mixture of solid-state-synthesized SrNb₂O₆ and BaNb₂O₆ powders. The resulting ceramics possessed strong fiber texture along the polar axis ([001]) of the strontium barium niobate. Samples with 15.4 wt% templates attained a textured fraction of 0.82 after sintering at a temperature of 1450°C for 4 h. These materials showed peak dielectric constants of 7550 at 1 kHz, remanent polarizations of 13.2 μC/cm², saturation polarizations of 21 μC/cm² (60%–85% of the single-crystal value), piezoelectric strain coefficients of 78 pC/N (70%–85% of the single-crystal value), and room-temperature pyroelectric coefficients of 2.9 × 10⁻²μC·(cm²·°C)⁻¹ (52% of the single-crystal value). These results show that TGG is a viable option for accessing single-crystal properties in polycrystalline ceramics.     

Fabrication of Transparent, Sintered Sc2O3 Ceramics

We report here the fabrication of transparent Sc₂O₃ ceramics via vacuum sintering. The starting Sc₂O₃ powders are pyrolyzed from a basic sulfate precursor (Sc(OH)_2.6(SO₄)_0.2·H₂O) precipitated from scandium sulfate solution with hexamethylenetetramine as the precipitant. Thermal decomposition behavior of the precursor is studied via differential thermal analysis/thermogravimetry, Fourier transform infrared spectroscopy, X-ray diffractometry, and elemental analysis. Sinterability of the Sc₂O₃ powders is studied via dilatometry. Microstructure evolution of the ceramic during sintering is investigated via field emission scanning electron microscopy. The best calcination temperature for the precursor is 1100°C, at which the resultant Sc₂O₃ powder is ultrafine (∼85 nm), well dispersed, and almost free from residual sulfur contamination. With this reactive powder, transparent Sc₂O₃ ceramics having an average grain size of ∼9 μm and showing a visible wavelength transmittance of ∼60–62% (∼76% of that of Sc₂O₃ single crystal) have been fabricated via vacuum sintering at a relatively low temperature of 1700°C for 4 h.     

Effect of Grain Size on Diffusion-Induced Grain-Boundary Migration in Ba(Zn1/3Nb2/3)O3 Ceramics

Diffusion-induced grain-boundary migration (DIGM) in Ba(Zn_1/3Nb_2/3)O₃ (BZN) ceramics was investigated with small (3.0 μm) and large (31. 4 μm) grain size specimens. The specimens were embedded in Nb₂O₅ or ZnO powders and then heat-treated at 1250° and 1310°C, respectively. The grain boundaries of the small grain size specimens were immobile, while those of the large grain size specimens migrated away from their centers of curvature. From the observed difference in migration behavior depending on grain size, the magnitude of the driving force for the DIGM was estimated.     

Effects of La2O3 Addition and PbO Excess on the Transmittance of PbZrO3–PbTiO3–Pb(Zn1/3Nb2/3)O3 Ceramics by Spark Plasma Sintering

The effects of La₂O₃ addition and PbO excess on the microstructures and optical properties of PbZrO₃–PbTiO₃–Pb(Zn_1/3Nb_2/3)O₃ (PZ–PT–PZN) ceramics prepared by spark plasma sintering were investigated. When 1 mol% La₂O₃ was added, the highest transmittance of 35% at 700 nm for PZ–PT–PZN ceramics was obtained. The improved transmittance was attributed to the increased relative density and the decreased optical anisotropy. The samples containing more than 1 mol% La₂O₃ showed decreased transmittance, due to the appearance of secondary phases. The transmittance of PZ–PT–PZN ceramics increased slightly to 29% at 700 nm with increasing amount of excess PbO up to 10 mol% and thereafter decreased rapidly.     

Dielectric Properties of the "Twinned" 8H-Hexagonal Perovskite Ba8Nb4Ti3O24

The dielectric properties of dense ceramics of the "twinned" 8H-hexagonal perovskite Ba₈Nb₄Ti₃O₂₄ are reported. Single-phase powders were obtained from the mixed-oxide route at 1325°C and ceramics (>92% of the theoretical X-ray density) by sintering in air or flowing O₂ at 1400°–1450°C. The ceramics are dc insulators with a band gap >3.4 eV that resonate at microwave frequencies with relative permittivity, ɛ_r∼44–48, quality factor, Q × f _r∼21 000–23 500 GHz (at f _r∼5.5 GHz) and temperature coefficient of resonant frequency, TC _f,∼+115 ppm/K.     

Temperature-Stable Dielectrics Based on Chemically Inhomogeneous BaTiO3

The dielectric properties and chemical homogeneity of BaTiO₃ ceramics sintered with additions of the pseudophase "CdBi₂Nb₂O₉" were investigated using SEM, TEM, STEM, and EDX. In materials showing the "X7R" dielectric temperature characteristic, the microstructure exhibits the grain core-grain shell structure. The perovskite material in the shell shows a temperature characteristic determined by mixed crystals of BaTiO₃ with the complex perovskites Ba(Bi_1/2Nb_1/2)O₃ and Ba(Cd_1/3Nb_2/3)O₃ having an approximate Curie point of -80°C. The chemical inhomogeneity emerges during a process of reactive liquid-phase sintering. Application of too-high sintering temperatures leads to uniform distributions of the additives via solid-state diffusion and to the loss of the X7R characteristic.     

Piezoelectric Properties of Pb(Mg1/3Nb2/3)O3 PbTiO3 -PbZrO3 Ceramics Modified with Certain Additives

Effects of additives on the piezoelectric properties of Pb(Mg_1/3Nb_2/3)O₃-PbTiO₃-PbZrO₃ ceramics in a perovskite-type structure are described. The tetragonality of Pb(Mg_1/3Nb_2/3)_0.375-Ti_0.375Zr_0.25O₃ ceramics increased with the addition of NiO, Cr₂O₃, or Fe₂O₃ but decreased with the addition of MnO₂ or CoO. The dielectric and piezoelectric properties of the base composition were improved markedly through selection of additives in proper amounts. Addition of NiO yielded a high dielectric constant and planar coupling coefficient for compositions at the morphotropic transition boundary. High mechanical Q -factors and low electrical dissipation factors were obtained by addition of MnO₂. Addition of both NiO and MnO₂ produced a mechanical Q -factor of 2051 and a planar coupling coefficient of 0.553. The resonant frequency of Pb(Mg_1/2Nb_2/3)_0.4375Ti_0.4375 zr_0.125O₃ containing MnO₂ had very low temperature and time dependence. The microstructure indicated that ceramics with a high mechanical Q -factor had a fine, uniform grain structure. Addition of Cr₂O₃ retarded grain growth and addition of MnO₂, NiO, CoO, or Fe₂O₃ promoted grain growth in the ternary system.     

Low-Temperature Sintering and Microwave Dielectric Properties of the Zn2SiO4 Ceramics

B₂O₃ was added to nominal composition Zn_1.8SiO_3.8 (ZS) ceramics to decrease their sintering temperature for application to low-temperature cofired ceramic (LTCC) devices. B₂O₃ reacted with SiO₂ to form a liquid phase containing SiO₂ and B₂O₃. The composition and melting temperature of the liquid phase depended on the sintering temperature and the B₂O₃ content. The specimen containing 20.0 mol% of B₂O₃ sintered at 900°C exhibited high microwave dielectric properties of Q × f =53 000 GHz, ɛ _r=5.7, and τ_f=−16 ppm/°C, confirming the promising potential of the B₂O₃-added ZS ceramics as candidate materials for the LTCC devices.     

Microstructures and Microwave Dielectric Characteristics of Ca(Zn1/3Nb2/3)O3 Complex Perovskite Ceramics

Ca(Zn_1/3Nb_2/3)O₃ microwave dielectric ceramics were prepared using a solid-state reaction process, and their microwave dielectric properties were evaluated as functions of sintering and postdensification annealing conditions. The relationship between microwave dielectric properties and processing was interpreted through the variation of microstructures. The dielectric constant showed slight variation with sintering and annealing conditions, but the Q × f value increased at first and then decreased with increased sintering temperature, and annealing in oxygen indicated significant improvement in Q × f , especially for the specimens sintered at higher temperatures. The good microwave dielectric properties were obtained in the ceramics sintered at 1225°C in air for 3 h and annealed at 1100°C in oxygen for 8 h: ɛ= 34.1, Q × f = 15 890 GHz, τ_f=−48 ppm/°C.     

Effect of Bi2O3 Addition on the Sintering Temperature and Microwave Dielectric Properties of Zn2SiO4 Ceramics

Bi₂O₃ was added to a nominal composition of Zn_1.8SiO_3.8 (ZS) ceramics to decrease their sintering temperature. When the Bi₂O₃ content was <8.0 mol%, a porous microstructure with Bi₄(SiO₄)₃ and SiO₂ second phases was developed in the specimen sintered at 885°C. However, when the Bi₂O₃ content exceeded 8.0 mol%, a liquid phase, which formed during sintering at temperatures below 900°C, assisted the densification of the ZS ceramics. Good microwave dielectric properties of Q × f =12,600 GHz, ɛ_r=7.6, and τ_f=−22 ppm/°C were obtained from the specimen with 8.0 mol% Bi₂O₃ sintered at 885°C for 2 h.     

Tape Casting and Dielectric Properties of Zn2Te3O8-Based Ceramics with an Ultra-Low Sintering Temperature

The suitability of dielectric ceramics made of zinc tellurate (Zn₂Te₃O₈) and titanium dioxide (TiO₂) with an ultra-low sintering temperature (650°C) for tape casting and thus for the multimodule technique with Al electrodes was investigated. The properties of the tape before and after sintering as well as the amount of organic additives for the casting process and a thermal analysis of the tape up to 1000°C are reported. In addition, electrodes on a multilayer module made on stacked tapes were prepared using Al paste and postfiring, followed by relative permittivity and loss tangent measurements to verify the electrical performance of the whole structure. The dielectric properties of the stacked module without any electrodes were also measured. The results show that the composition is well suited for the tape process but extra care should be taken especially with the proper sintering temperature for optimized electrical performance.     

Nanopowder Preparation and Dielectric Properties of a Bi2O3–Nb2O5 Binary System Prepared by the High-Energy Ball-Milling Method

The high-energy ball-milling (HEM) method was used to synthesize the compositions of BiNbO₄, Bi₅Nb₃O₁₅, and Bi₃NbO₇ in a Bi₂O₃–Nb₂O₅ binary system. Reagent Bi₂O₃ and Nb₂O₅ were chosen as the starting materials. The X-ray diffraction patterns of the three compositions milled for different times were studied. Only the cubic Bi₃NbO₇ phase, Nb₂O₅, and amorphous matters were observed in powders after being milled for 10 h. After heating at proper temperatures the amorphous matters disappeared and the proleptic phases of BiNbO₄ and Bi₅Nb₃O₁₅ could be obtained. The Scherrer formula was used to calculate the crystal size and the results of nanopowders are between 10 and 20 nm. The scanning electron microscopy photos of Bi₃NbO₇ powders showed drastic aggregation, and the particle size was about 100 nm. The dielectric properties of ceramics sintered from the nanopowders prepared by HEM at 100–1 MHz and the microwave region were measured. Bi₃NbO₇ ceramics showed a good microwave permittivity ɛ_r of about 80 and a Q × f of about 300 at 5 GHz. The triclinic phase of BiNbO₄ ceramics reached its best properties with ɛ_r=24 and Q × f =14 000 GHz at about 8 GHz.     

Dielectric and Ferroelectric Properties of Ceramics in the Pb(Zn 1/3Nb2/3)O3-BaTiO3-PbTiO3 System

The use of Pb(Zn_1/3Nb_2/3)O₃ ceramics is restricted by the formation of a pyrochlore phase detrimental to both dielectric and piezoelectric properties. Recently it has been shown that a 6 mol% addition of BaTiO₃ to PZN suppresses the formation of pyrochlore phase. Phase relations and dielectric properties of ceramics in the PZN-BT-PT system are reported here. Compositions with the perovskite structure, having high dielectric constant and low temperature coefficient of capacitance, have been identified.     

Atmospheric Dependence on Dielectric Loss of 1/6Ba5Nb4O15· 5/6BaNb2O6 Ceramics

Samples of 1/6Ba₅Nb₄O₁₅·5/6BaNb₂O₆ along with the pure end members, Ba₅Nb₄O₁₅ and BaNb₂O₆, were sintered under low oxygen partial pressure. The degradation mechanisms of dielectric loss in this reducing atmosphere have been studied. We found that the degradation occurred primarily due to the formation of oxygen vacancies caused by the reduction of Nb⁵⁺. This was determined by measuring the electrical conductivity, and through X-ray photoelectron spectroscopy. More importantly, the dielectric loss of 1/6Ba₅Nb₄O₁₅·5/6BaNb₂O₆ samples with higher temperature stability was further decreased on sintering in a reducing atmosphere. This observation has been explained by considering the increased porosity and formation of a reduced second phase, Ba_0.65NbO₃.