Steam reforming of ethanol over Co3O4–Fe2O3 mixed oxides

Co₃O₄, Fe₂O₃ and a mixture of the two oxides Co–Fe (molar ratio of Co₃O₄/Fe₂O₃ = 0.67 and atomic ratio of Co/Fe = 1) were prepared by the calcination of cobalt oxalate and/or iron oxalate salts at 500 °C for 2 h in static air using water as a solvent/dispersing agent. The catalysts were studied in the steam reforming of ethanol to investigate the effect of the partial substitution of Co₃O₄ with Fe₂O₃ on the catalytic behaviour. The reforming activity over Fe₂O₃, while initially high, underwent fast deactivation. In comparison, over the Co–Fe catalyst both the H₂ yield and stability were higher than that found over the pure Co₃O₄ or Fe₂O₃ catalysts. DRIFTS-MS studies under the reaction feed highlighted that the Co–Fe catalyst had increased amounts of adsorbed OH/water; similar to Fe₂O₃. Increasing the amount of reactive species (water/OH species) adsorbed on the Co–Fe catalyst surface is proposed to facilitate the steam reforming reaction rather than decomposition reactions reducing by-product formation and providing a higher H₂ yield.     

Thermophysical properties and devitrification of SrO–La2O3–Al2O3–B2O3–SiO2-based glass sealant for solid oxide fuel/electrolyzer cells

Thermal behaviors and stability of glass/glass–ceramic-based sealant materials are critical issues for high temperature solid oxide fuel/electrolyzer cells. To understand the thermophysical properties and devitrification behavior of SrO–La₂O₃–Al₂O₃–B₂O₃–SiO₂ system, glasses were synthesized by quenching (25 − X)SrO–20La₂O₃–(7 + X)Al₂O₃–40B₂O₃–8SiO₂ oxides, where X was varied from 0.0 mol% to 10.0 mol% at 2.5 mol% interval. Thermal properties were characterized by dilatometry and differential scanning calorimetry (DSC). Microstructural studies were performed by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and X-ray diffraction (XRD). All the compositions have a glass transition temperature greater than 620 °C and a crystallization temperature greater than 826 °C. Also, all the glasses have a coefficient of thermal expansion (CTE) between 9.0 × 10⁻⁶ K⁻¹ and 14.5 × 10⁶ K⁻¹ after the first thermal cycle. La₂O₃ and B₂O₃ contribute to glass devitrification by forming crystalline LaBO₃. Al₂O₃ stabilizes the glasses by suppressing devitrification. Significant improvement in devitrification resistance is observed as X increases from 0.0 mol% to 10.0 mol%.     

Effects of Y2O3-modification to Ni/γ-Al2O3 catalysts on autothermal reforming of methane with CO2 to syngas

The effects of Y₂O₃-modification to Ni/γ-Al₂O₃ catalysts on autothermal reforming of methane to syngas were investigated. It was found that the introduction of Y₂O₃ (5%, 8%, 10%) lead to significant improvement in catalytic activity and stability, and the H₂/CO ratio could be adjusted via controlling the O₂/CO₂ ratio of the feed gas. According to the characterization results of catalysts before and after reaction, it was found that the Y₂O₃·γ-Al₂O₃ supported Ni catalysts had higher NiO reducibility, smaller Ni particle size, higher Ni dispersion and stronger basicity than those of the Ni/γ-Al₂O₃ catalysts. The analysis of catalysts after reaction showed that the addition of Y₂O₃ inhibited the Ni sintering, changed the type of coke and decreased the amount of coke on the catalysts. All the experimental results indicated that the introduction of Y₂O₃ to Ni/γ-Al₂O₃ resulted in excellent catalytic performances in autothermal reforming of methane, and Y₂O₃ played important roles in preventing metal sintering and coke deposition via controlling NiO reducibility, Ni particle size and dispersion, and basicity of catalysts.     

Plasma-reduced Ni/γ–Al2O3 and CeO2–Ni/γ–Al2O3 catalysts for improving dry reforming of propane

Pristine Ni/γ–Al₂O₃ and CeO₂–Ni/γ–Al₂O₃ catalysts were prepared by co-impregnation technique for dry reforming of propane. X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) were used to examine the structure and morphology of the catalysts before and after the reforming reactions. The excellent interaction between catalyst active phases was observed in both CeO₂–Ni/γ–Al₂O₃ and Ni/γ–Al₂O₃ stabilized with polyethelene glycol (Ni/γ–Al₂O₃–PEG). Towards C₃H₈ and CO₂ conversion, the CeO₂–Ni/γ–Al₂O₃ and Ni/γ–Al₂O₃–PEG showed improved catalytic activity when compared to the pristine Ni/γ–Al₂O₃ catalyst. Interestingly, high H₂ concentration was achieved with the CeO₂–Ni/γ–Al₂O₃ and high CO concentration with the Ni/γ–Al₂O₃–PEG, which is due to the nanoconfinement of nickel particles within the support and favorable metal-support interaction as a result of plasma reduction. The CeO₂–Ni/γ–Al₂O₃ catalyst exhibited better stability for anti-sintering and coke resistance, thus exhibiting high reactivity and durability in the dry reforming.     

Effect of B2O3–Bi2O3–PbO frit on the performance of LaBaCo2O5+δ cathode for intermediate-temperature solid oxide fuel cells

The effects of B₂O₃–Bi₂O₃–PbO (BBP) frit on the electrochemical performance, electrical conductivity, and thermal expansion of LaBaCo₂O_5+δ (LBCO) cathode were investigated. BBP frit was found to be effective in lowering the sintering temperature of LBCO cathode by about 200 °C and in improving its electrochemical performance within the intermediate-temperature range of 600–800 °C. LBCO with 5 wt.% BBP frit cathode based on Sm_0.2Ce_0.8O_1.9 electrolyte showed the best electrochemical performance, i.e., the lowest area-specific resistance (ASR) and cathodic overpotential. The ASR values were about 64.1%, 66.1%, and 74.5% lower than those of LBCO at 700, 750, and 800 °C, respectively. The cathodic overpotential decreased from 51.0 mV for LBCO to 8.2 mV at a current density of 0.2 A cm⁻² at 700 °C. The electrical conductivity of LBCO with 5 wt.% BBP frit was about 320–330 S cm⁻¹ at 600–800 °C in air.     

Catalysts of Ni/α-Al2O3 and Ni/La2O3-αAl2O3 for hydrogen production by steam reforming of bio-oil aqueous fraction with pyrolytic lignin retention

This paper reports on the steam reforming, in continuous regime, of the aqueous fraction of bio-oil obtained by flash pyrolysis of lignocellulosic biomass (sawdust). The reaction system is provided with two steps in series: i) thermal step at 200 °C, for the pyrolytic lignin retention, and ii) reforming in-line of the treated bio-oil in a fluidized bed reactor, in the range 600–800 °C, with space-time between 0.10 and 0.45 g_catalyst h (g_bio-oil)⁻¹. The benefits of incorporating La₂O₃ to the Ni/α-Al₂O₃ catalyst on the kinetic behavior (bio-oil conversion, yield and selectivity of hydrogen) and deactivation were determined. The significant role of temperature in gasifying coke precursors was also analyzed. Complete conversion of bio-oil is achieved with the Ni/La₂O₃-αAl₂O₃ catalyst, at 700 °C and space-time of 0.22 g_catalyst h (g_bio-oil)⁻¹. The catalyst deactivation is low and the hydrogen yield and selectivity achieved are 96% and 70%, respectively.     

A study on electrical conductivity of chemosynthetic Al2O3–2SiO2 geoploymer materials

Al₂O₃–2SiO₂ amorphous powders are synthesized by sol–gel method with tetraethoxysilane (TEOS) and aluminum nitrate (ANN) as the starting materials. The microstructure and phase structure of the powders are investigated by SEM and XRD analysis. Geopolymer materials samples are prepared by mechanically mixing stoichiometric amounts of calcined Al₂O₃–2SiO₂ powders and sodium silicate solutions to allow a mass ratio of Na₂O/Al₂O₃ = 0.4, 0.375, 0.35, 0.325, 0.288, 0.26, 0.23 or 0.2 separately, and finally to form a homogenous slurry at a fixed H₂O/Na₂O mole ratio = 11.7. The results show that the synthetic Al₂O₃–2SiO₂ powders have polycondensed property and their compressive strengthes are similar to that of nature metakaolin geopolymer materials. The results also show that the water consumption is not the main influencing factor on electrical conductivity of harden geopolymer materials but it can intensively affect the microstructure of geopolymer materials. In addition, the electrical conductivity of harden geopolymer sample is investigated, and the results show that the geopolymer materials have a high ionic electrical conductivity of about 1.5 × 10⁻⁶ S cm⁻¹ in air at room temperature.     

Oxidative steam reforming of ethanol over Ni/Al2O3 catalysts promoted by CeO2, ZrO2 and CeO2–ZrO2

Oxidative steam reforming of ethanol at low oxygen to ethanol ratios was investigated over nickel catalysts on Al₂O₃ supports that were either unpromoted or promoted with CeO₂, ZrO₂ and CeO₂–ZrO₂. The promoted catalysts showed greater activity and a higher hydrogen yield than the unpromoted catalyst. The characterization of the Ni-based catalysts promoted with CeO₂ and/or ZrO₂ showed that the variations induced in the Al₂O₃ by the addition of CeO₂ and/or ZrO₂ alter the catalyst's properties by enhancing Ni dispersion and reducing Ni particle size. The promoters, especially CeO₂–ZrO₂, improved catalytic activity by increasing the H₂ yield and the CO₂/CO and the H₂/CO values while decreasing coke formation. This results from the addition of ZrO₂ into CeO₂. This promoter highlights the advantages of oxygen storage capacity and of mobile oxygen vacancies that increase the number of surface oxygen species. The addition of oxygen facilitates the reaction by regenerating the surface oxygenation of the promoters and by oxidizing surface carbon species and carbon-containing products.     

CO2 reforming of CH4 by combination of cold plasma jet and Ni/γ-Al2O3 catalyst

CO₂ reforming of CH₄ to synthesis gas was investigated by cold plasma jet (CPJ) only and combination of cold plasma jet with Ni/γ-Al₂O₃ catalyst at atmospheric pressure. The higher selectivity of H₂ and CO, and higher energy efficiency was obtained by this novel process. The optimum experimental conditions are: CH₄ = 3.33 Nl/min, CO₂ = 5.00 Nl/min, N₂ = 8.33 Nl/min, and the input power at 770 W. The results showed that, for the plasma only, the conversions of CH₄ and CO₂ were 46% and 34%, the selectivities of CO and H₂ were 85% and 78%, the energy efficiency was 2.9 mmol/kJ, respectively; for the combination of cold plasma jet with Ni/γ-Al₂O₃ catalyst, the conversions of CH₄ and CO₂ were increased by 14% and 6%, the yield of H₂ and CO increased by 18% and 11%, the energy efficiency reached at 3.7 mmol/kJ, respectively. And the catalyst hasn't accessorial heating. The CPJ method has the advantage of simple processing and is easy to be industrialized.     

Characterization and activity test of commercial Ni/Al2O3, Cu/ZnO/Al2O3 and prepared Ni–Cu/Al2O3 catalysts for hydrogen production from methane and methanol fuels

In this study, methane and methanol steam reforming reactions over commercial Ni/Al₂O₃, commercial Cu/ZnO/Al₂O₃ and prepared Ni–Cu/Al₂O₃ catalysts were investigated. Methane and methanol steam reforming reactions catalysts were characterized using various techniques. The results of characterization showed that Cu particles increase the active particle size of Ni (19.3 nm) in Ni–Cu/Al₂O₃ catalyst with respect to the commercial Ni/Al₂O₃ (17.9). On the other hand, Ni improves Cu dispersion in the same catalyst (1.74%) in comparison with commercial Cu/ZnO/Al₂O₃ (0.21%). A comprehensive comparison between these two fuels is established in terms of reaction conditions, fuel conversion, H₂ selectivity, CO₂ and CO selectivity. The prepared catalyst showed low selectivity for CO in both fuels and it was more selective to H₂, with H₂ selectivities of 99% in methane and 89% in methanol reforming reactions. A significant objective is to develop catalysts which can operate at lower temperatures and resist deactivation. Methanol steam reforming is carried out at a much lower temperature than methane steam reforming in prepared and commercial catalyst (275–325 °C). However, methane steam reforming can be carried out at a relatively low temperature on Ni–Cu catalyst (600–650 °C) and at higher temperature in commercial methane reforming catalyst (700–800 °C). Commercial Ni/Al₂O₃ catalyst resulted in high coke formation (28.3% loss in mass) compared to prepared Ni–Cu/Al₂O₃ (8.9%) and commercial Cu/ZnO/Al₂O₃ catalysts (3.5%).     

Syngas production by CO2 reforming of coke oven gas over Ni/La2O3–ZrO2 catalysts

Syngas production by CO₂ reforming of coke oven gas (COG) was studied in a fixed-bed reactor over Ni/La₂O₃–ZrO₂ catalysts. The catalysts were prepared by sol–gel technique and tested by XRF, BET, XRD, H₂-TPR, TEM and TG–DSC. The influence of nickel loadings and calcination temperature of the catalysts on reforming reaction was measured. The characterization results revealed that all of the catalysts present excellent resistance to coking. The catalyst with appropriate nickel content and calcination temperature has better dispersion of active metal and higher conversion. It is found that the Ni/La₂O₃–ZrO₂ catalyst with 10 wt% nickel loading provides the best catalytic activity with the conversions of CH₄ and CO₂ both more than 95% at 800 °C under the atmospheric pressure. The Ni/La₂O₃–ZrO₂ catalysts show excellent catalytic performance and anti-carbon property, which will be of great prospects for catalytic CO₂ reforming of COG in the future.     

Hydrogen production from oxidative steam-reforming of n-propanol over Ni/Y2O3–ZrO2 catalysts

Oxidative steam reforming (OSR) of n-propanol was studied over new Ni catalysts (ca. 7% Ni wt/wt) supported on Y₂O₃–ZrO₂ oxides with different yttrium content (2–41 % Y₂O₃ wt/wt). Materials were characterized by X-ray diffraction, temperature-programmed reduction, X-ray photoelectron and Raman spectroscopy, scanning electron microscopy with energy dispersive X-ray analysis and high resolution transmission electron microscopy. Samples were used in calcined form and tested in the temperature range 673–773 K using a reactant feed of n-propanol/water/O₂ at a molar ratio 1/9/0.5. Hydrogen production is related with the support composition and Ni dispersion.     

Study of polymer electrolytes with grafted Au–γ-Fe2O3 nanoparticles

The work is aimed at enhancing the Li⁺ ion-conduction properties of polymer electrolytes (PE) for thin-film solid-state batteries. The research exploits novel ideas of structuring ionically conducting polymers or molecular polyether building blocks with grafted magnetic nanoparticles with the use of magnetic field, in order to enhance ionic conductivity along oriented helical PE chains. The experimental route being tested is based on the chemisorption of thiolated PEO on core–shell gold-coated maghemite. It was found that casting, under a gradient magnetic field (GMF), of concentrated PEs containing very small concentration – 0.5%(w/w) dithiol-connected Fe₂O₃/Fe₃O₄–Au nanoparticles results in enhancement of the total ionic conductivity by more than an order of magnitude.     

Effects of noble metal-doping on Ni/La2O3–ZrO2 catalysts for dry reforming of coke oven gas

A series of noble metal (Ru, Pd, Ag) doped Ni catalysts supported on La₂O₃–ZrO₂ mixed oxide were prepared using the sol–gel method and evaluated for use in dry reforming of coke oven gas (COG). The catalysts were investigated by means of N₂ adsorption–desorption, XRD, H₂-TPR, TPH, TEM and TG–DSC. TPH analysis revealed that two carbonaceous species formed on the used catalysts and that the low-temperature carbon species was sufficiently active for the reforming reaction. TEM observations indicated that highly dispersed and small metal particles were formed, suppressing coke deposition and improving catalytic performance. The test results indicated that the addition of trace amounts of noble metals effectively promotes catalytic activity. The 0.1Ru–10Ni/8LZ catalyst showed the highest performance among the bimetallic catalysts, because of the strong synergetic effect between Ru and Ni via the formation of a Ru–Ni alloy, which will be promising catalysts in the catalytic dry reforming of COG.     

Combination of CO2 reforming and partial oxidation of methane to produce syngas over Ni/SiO2 and Ni–Al2O3/SiO2 catalysts with different precursors

Ni/SiO₂ and Ni–Al₂O₃/SiO₂ catalysts were prepared by incipient wetness impregnation using citrate and nitrate precursors and tested with a reaction of combination of CO₂ reforming and partial oxidation of methane to produce syngas (H₂/CO). The catalytic activity of Ni/SiO₂ and Ni–Al₂O₃/SiO₂ greatly depended on interaction between NiO and support. NiO strongly interacted with support formed small nickel particles (about 4 nm for NiSC which is abbreviation of Ni/SiO₂ prepared with Nickel citrate precursor) after reduction. The small nickel particles over NiSC catalysts exhibited a good catalytic performance.     

Metal-supported solid oxide fuel cells with in-situ sintered (Bi2O3)0.7(Er2O3)0.3–Ag composite cathode

Metal-supported solid oxide fuel cells (SOFCs) containing porous 430L stainless steel support, Ni-YSZ anode and YSZ electrolyte were fabricated by tape casting, laminating and co-firing in a reduced atmosphere. (Bi₂O₃)_0.7(Er₂O₃)_0.3–Ag composite cathode was applied by screen printing and in-situ sintering. The polarization resistances of the composite cathode were 1.18, 0.48, 0.18, 0.09 Ω cm² at 600, 650, 700 and 750 °C, respectively. A promissing maximum power density of 568 mW cm⁻² at 750 °C was obtained of the single cell. Short-term stability was measured as well.     

Catalytic effect of MgFe2O4 on the hydrogen storage properties of Na3AlH6–LiBH4 composite system

The effect of MgFe₂O₄ on the hydrogen storage properties of the composite Na₃AlH₆4LiBH₄ was studied for the first time, where it was found that MgFe₂O₄ addition decreased the onset desorption temperature of Na₃AlH₆4LiBH₄. Hydrogen (～9.5 wt%) was released in three stages and the dehydrogenation temperatures were reduced to 80 °C, 350 °C, and 430 °C for the first, second, and third stage, respectively. The absorption kinetics of Na₃AlH₆4LiBH₄ was also significantly improved due to the catalytic effect of MgFe₂O₄. Using Kissinger analysis, the apparent activation energies of decomposition of the Li₃AlH₆ and NaBH₄ stages in Na₃AlH₆4LiBH₄-10 wt% MgFe₂O₄ were calculated to be 72 and 141 kJ/mol, respectively. These values were considerably lower than the corresponding values for the undoped composite. X-ray diffraction analysis revealed the formation of new products such as MgO and Fe during the heating process. Our results suggest that MgFe₂O₄ enhanced the hydrogen storage properties of Na₃AlH₆4LiBH₄ through the formation of active species, such as MgO and Fe.     

Ag/Al2O3(Li2O)/g-C3N4光催化乙醇制取环氧乙烷

本文制备了一系列Ag/Al₂O₃(Li₂O)/g-C₃N₄复合催化剂,考察了其可见光催化乙醇制取环氧乙烷的性能。Li₂O可调变Al₂O₃表面的酸性,从而降低了主要副产物乙醛的选择性。Ag/Al₂O₃(Li₂O) 在g-C₃N₄上的负载量对产物环氧乙烷的选择性有较大影响,当Ag/Al₂O₃(Li₂O) 负载量为5wt%时,乙醇具有较高的转换率,且环氧乙烷的选择性高达100%。