Cu2O/Cu/TiO2 nanotube Ohmic heterojunction arrays with enhanced photocatalytic hydrogen production activity

Cu₂O/Cu/TiO₂ nanotube heterojunction arrays were prepared by assembling Cu@Cu₂O core-shell nanoparticles on TiO₂ nanotube arrays (NTAs) using a facile impregnation-reduction method. SEM and TEM results show that Cu@Cu₂O plate-like nanoparticles with tens of nanometers in size are confined inside TiO₂ NTAs. Only the outmost several nanometers of the nanoparticles are Cu₂O and the predominant inner of the nanoparticles are Cu metals. Cu L₃VV Auger spectra of Cu₂O/Cu/TiO₂ NTAs suggest that Cu metals are enveloped by at least several nanometers Cu₂O on the surface, which further confirms the Cu@Cu₂O core shell structure of Cu nanoparticles. The ability of light absorption of Cu₂O/Cu/TiO₂ NTAs is enhanced. The range of absorption wavelengths changes from 400 to 700 nm due to the surface plasmon response of Cu metals core and Cu₂O nanoparticles shell. The photocatalytic hydrogen production rate of Cu₂O/Cu/TiO₂ heterojunction arrays is enhanced when compared with those of Cu₂O/TiO₂ NTAs and TiO₂ NTAs under UV light. Moreover, a stable H₂ generation property was obtained under visible light (λ gt; 400 nm). The Cu metal core is believed to play a key role in the enhancement of photocatalytic properties of Cu₂O/Cu/TiO₂ nanotube heterojunction arrays.     

Multi-electron storage of photoenergy using Cu2O–TiO2 thin film photocatalyst

UV–vis irradiation of thin films of TiO₂ (ITO/TiO₂) and Cu₂O/TiO₂ (ITO/Cu₂O/TiO₂) coated on conducting glasses generate H₂ from H₂O and once the illumination is ceased, the H₂ production was still noticeable under dark for ITO/Cu₂O/TiO₂ at a lesser production rate for up to 2 h. No such dark reactions were observed for ITO/TiO₂ or TiO₂-coated copper metal foil (Cu/TiO₂). It was noticed that the irradiation of ITO/Cu₂O/TiO₂ leads to formation of trapped electrons and this stored energy leads to generate H₂ from H₂O in the dark.     

Controllable proton and CO2 photoreduction over Cu2O with various morphologies

Simultaneous photocatalytic reduction of water to H₂ and CO₂ to CO was observed over Cu₂O photocatalyst under both full arc and visible light irradiation (>420 nm). It was found that the photocatalytic reduction preference shifts from H₂ (water splitting) to CO (CO₂ reduction) by controlling the exposed facets of Cu₂O. More interestingly, the low index facets of Cu₂O exhibit higher activity for CO₂ photoreduction than high index facets, which is different from the widely-reported in which the facets with high Miller indices would show higher photoactivity. Improved CO conversion yield could be further achieved by coupling the Cu₂O with RuO_x to form a heterojunction which slows down fast charge recombination and relatively stabilises the Cu₂O photocatalyst. The RuO_x amount was also optimised to maximise the junction's photoactivity.     

The influence of the electrodeposition potential on the morphology of Cu2O/TiO2 nanotube arrays and their visible-light-driven photocatalytic activity for hydrogen evolution

The influence of the electrodeposition potential on the morphology of Cu₂O/TiO₂ nanotube arrays (Cu₂O/TNA) and their visible-light-driven photocatalytic activity for hydrogen evolution have been investigated for the first time in this work. The photocatalytic hydrogen evolution rate of the as-prepared Cu₂O/TNA at the deposition potential of −0.8 V was about 42.4 times that of the pure TNA under visible light irradiation. This work demonstrated a feasible and simple electrodeposition method to fabricate an effective and recyclable visible-light-driven photocatalyst for hydrogen evolution.     

Cu(OH)2-modified TiO2 nanotube arrays for efficient photocatalytic hydrogen production

Cu(OH)₂/TNAs photocatalyst was prepared by loading Cu(OH)₂ nanoparticles on TiO₂ nanotube arrays (TNAs) using a chemical bath deposition method. The amount of Cu(OH)₂ loaded on the arrays was controlled by the repeated deposition times. The prepared catalyst was used to generate hydrogen under simulated solar light irradiation, and the results demonstrated that the hydrogen yield of Cu(OH)₂/TNAs was 20.3 times that of the pure TNAs. Furthermore, the photocatalytic efficiency for hydrogen production decreased only 5.8% after five cycles, indicating that Cu(OH)₂/TNAs photocatalyst showed excellent stability and reusability. This work presents an applicable and facile method to fabricate a highly active and stable photocatalyst for hydrogen production.     

Continuous hydrogen production activity over finely dispersed Ag2O/TiO2 catalysts from methanol:water mixtures under solar irradiation: A structure–activity correlation

Ag₂O/TiO₂ catalysts with varying amounts of Ag₂O 0.5, 1, 2, and 5 wt% loadings are prepared by impregnation method and Ag/TiO₂ catalyst is prepared by photo deposition method. These catalysts are characterized by XRD, SEM-EDAX, DRS, XPS and TEM techniques. DRS studies clearly showing the expanded photo response of TiO₂ into visible region on impregnation of Ag⁺ ions on surface layers of TiO₂ due to the increased number of energy states created by the silver ions in TiO₂ surface lattice. TEM images are showing the fine dispersion of silver particles on TiO₂ surface. XPS of Ag₂O/TiO₂ calcined and used catalysts along with Ag₂O/TiO₂ reduced and Ag/TiO₂ photo deposited catalysts are compared and the binding energy values of Ti 2p, O1s and Ag 3d are confirming that silver ions are in interaction with TiO₂ in Ag₂O/TiO₂ calcined catalysts. EDAX analysis supports the presence of silver species on the surface layers of TiO₂. Photocatalytic hydrogen production activity studies are conducted over Ag₂O/TiO₂, Ag₂O/TiO₂ reduced and Ag/TiO₂ photo deposited catalysts in pure water and methanol:water mixtures under solar irradiation. Maximum hydrogen production of 145 μmoles/h is observed on 0.5wt% Ag₂O/TiO₂ catalyst in pure water and the maximum hydrogen production of 3350 μmoles/h is observed on 1wt% Ag₂O/TiO₂ catalyst in methanol:water mixtures. Whereas Ag₂O/TiO₂ reduced and Ag/TiO₂ photo deposited catalysts are not showing any hydrogen production activity either in water or in methanol:water mixtures under solar irradiation. Based on the XPS, DRS, TEM, SEM-EDAX studies and the hydrogen production activity on these catalysts, a structure–activity correlation has been proposed wherein the interacted Ag⁺ ions on the surface layers of TiO₂ are playing an important role in maintaining the hydrogen production activity under solar irradiation.     

Preferential oxidation of CO in H2 stream on Au/CeO2–TiO2 catalysts

A series of Au catalysts supported on CeO₂–TiO₂ with various CeO₂ contents were prepared. CeO₂–TiO₂ was prepared by incipient-wetness impregnation with aqueous solution of Ce(NO₃)₃ on TiO₂. Gold catalysts were prepared by deposition–precipitation method at pH 7 and 65 °C. The catalysts were characterized by XRD, TEM and XPS. The preferential oxidation of CO in hydrogen stream was carried out in a fixed bed reactor. The catalyst mainly had metallic gold species and small amount of oxidic Au species. The average gold particle size was 2.5 nm. Adding suitable amount of CeO₂ on Au/TiO₂ catalyst could enhance CO oxidation and suppress H₂ oxidation at high reaction temperature (>50 °C). Additives such as La₂O₃, Co₃O₄ and CuO were added to Au/CeO₂–TiO₂ catalyst and tested for the preferential oxidation of CO in hydrogen stream. The addition of CuO on Au/CeO₂–TiO₂ catalyst increased the CO conversion and CO selectivity effectively. Au/CuO–CeO₂–TiO₂ with molar ratio of Cu:Ce:Ti = 0.5:1:9 demonstrated very high CO conversion when the temperature was higher than 65 °C and the CO selectivity also improved substantially. Thus the additive CuO along with the promoter and amorphous oxide ceria and titania not only enhances the electronic interaction, but also stabilizes the nanosize gold particles and thereby enhancing the catalytic activity for PROX reaction to a greater extent.     

Synthesis of g-C3N4/TiO2 with enhanced photocatalytic activity for H2 evolution by a simple method

A photocatalyst composed of graphite-like carbon nitride (g-C₃N₄) and TiO₂ was fabricated by a simple method to calcine the mixture of melamine and TiO₂ precursor. The photocatalyst has enhanced photoactivity for hydrogen evolution from water. Characterization by XRD, FTIR, SEM and elemental analysis showed that the crystal structure and morphologies of composites were affected by the amount of melamine in the composite. The UV–Vis characterization displayed that the optical absorption range of g-C₃N₄/TiO₂ hybrid was broadened with a synergistic effect. The photoactivity for H₂ evolution was shown that the best result obtained from the composite with 67 wt% melamine has about 5 times improvement compared with bare TiO₂ or pure g-C₃N₄. The enhanced photoactivity might be related with the favorable structure resulted from heat-treatment temperature, and the content of g-C₃N₄ participating in wide optical absorption, separation and transportation of electronic-holes, as well as morphology of composite.     

Photoelectrochemical and photocatalytic properties of Ag-loaded BaTiO3/TiO2 heterostructure nanotube arrays

BaTiO₃/TiO₂ (BT) heterostructure nanotube arrays were fabricated by in situ hydrothermal method using TiO₂ nanotubes as both template and reactant. Compared with pure TiO₂ nanotube arrays, the BT heterostructures exhibited enhanced photocurrent under UV light irradiation. For further improving the photoelectrochemical performance, Ag nanoparticles were loaded on the surface of BT heterostructure by two different photo-reduction (Ag/BT-P) and chemical reduction (Ag/BT-C) methods. The results showed that the Ag nanoparticles on Ag/BT-C were uniform and dispersed homogeneously, but the Ag nanoparticles on Ag/BT-P were very large, which resulted in the tailored and integrated nanotube structure destroyed. The electrochemical impedance spectra (EIS) indicated that the impedance arc radius of Ag/BT-C was much smaller than Ag/BT-P and the pure BT nanotube arrays, indicating that the enhanced charge carrier separation was achieved on Ag/BT-C. In addition, the Ag/BT-C nanotube arrays exhibited a higher photocatalytic activity for methylene blue (MB) degradation.     

CuCr2O4/TiO2 heterojunction for photocatalytic H2 evolution under simulated sunlight irradiation

CuCr₂O₄/TiO₂ heterojunction has been successfully synthesized via a facile citric acid (CA)-assisted sol-gel method. Techniques of X-ray diffraction (XRD), transmission electron microscopy (TEM), and UV-vis diffuse reflectance spectrum (UV-vis DRS) have been employed to characterize the as-synthesized nanocomposites. Furthermore, photocatalytic activities of the as-obtained nanocomposites have been evaluated based on the H₂ evolution from oxalic acid solution under simulated sunlight irradiation. Factors such as CuCr₂O₄ to TiO₂ molar ratio in the composites, calcination temperature, photocatalyst mass concentration, and initial oxalic acid concentration affecting the photocatalytic hydrogen producing have been studied in detail. The results showed that the nanocomposite of CuCr₂O₄/TiO₂ is more efficient than their single part of CuCr₂O₄ or TiO₂ in producing hydrogen. The optimized composition of the nanocomposites has been found to be CuCr₂O₄·0.7TiO₂. And the optimized calcination temperature and photocatalyst mass concentration are 500 °C and 0.8 g l⁻¹, respectively. The influence of initial oxalic acid concentration is consistent with the Langmuir model.     

Enhanced hydrogen generation from methanol aqueous solutions over Pt/MoO3/TiO2 under ultraviolet light

The photocatalytic activity in hydrogen production from methanol reforming can be significantly enhanced by Pt/MoO₃/TiO₂ photocatalysts. Compared with Pt/P25, the photocatalytic activity of optimized Pt/MoO₃/TiO₂ shows an evolution rate of 169 μmol/h/g of hydrogen, which is almost two times higher than that of Pt/P25. XRD and Raman spectra show that MoO₃ are formed on the surface of TiO₂. It is found that with the bulk MoO₃ just formed, the catalyst shows the highest activity due to a large amount of heterojunctions and the high crystallinity of MoO₃. The HRTEM image showed a close contact between MoO₃ and TiO₂. It is proposed that the Z-scheme type of heterojunction between MoO₃ and TiO₂ is responsible for the improved photocatalytic activity. The heterojunction structure of MoO₃/TiO₂ does not only promote the charge separation, but also separates the reaction sites, where the oxidation (mainly on MoO₃) and reduction (on TiO₂) reactions occurred.     

Structural properties of CuO/TiO2 nanorod in relation to their catalytic activity for simultaneous hydrogen production under solar light

CuO was introduced into porous TiO₂ nanorod through impregnation method. Before the impregnation step, TiO₂ nanorod was hydrothermally synthesized from TiO₂ powder in aqueous NaOH solution and followed by thermal treatment at 450 °C. The structures and properties of impregnated samples were characterized using various techniques, including XRD, BET, XAS, TEM, and UV-DRS. Their photocatalytic performance on simultaneous hydrogen production from pure water and aqueous methanol solution was also investigated under solar light. It was found that CuO/TiO₂ nanorod possessed a high surface area, good photocatalytic property and excellent hydrogen generation activity. Incorporation of Cu ions into the lattice framework of anatase TiO₂ nanorod enhanced the efficiency in visible region at 438–730 nm. Moreover, the XAS results showed that some Cu ions formed solid solution in the TiO₂ nanorod (Cu_xT_1−xO₂). However, the excessive incorporation of Cu ions did not improve any ability of anatase TiO₂ nanorod for production of hydrogen from pure water splitting. This could be due to the excessive CuO agglomeration at outside-pores which blocked the sensitization of TiO₂ nanorod. Only 1% Cu/TiO₂ nanorod was found to be a remarkable and an efficient photocatalyst for hydrogen production under solar light from both pure water and sacrificial methanol splitting. The highest rate of hydrogen production of 139.03 μmol h⁻¹ g_catalyst⁻¹ was found in sacrificial methanol which was 3.24% higher than in pure water.     

Low-temperature preparation of AgIn5S8/TiO2 heterojunction nanocomposite with efficient visible-light-driven hydrogen production

AgIn₅S₈ and AgIn₅S₈/TiO₂ heterojunction nanocomposite with efficient photoactivity for H₂ production were prepared by a low-temperature water bath deposition process. The resultant AgIn₅S₈ shows an absorption edge at ∼720 nm, corresponding to a bandgap of ∼1.72 eV, and its visible-light-driven photoactivity (100.1 μmol h⁻¹) for H₂ evolution is 9 times higher than that (11 μmol h⁻¹) of the product derived from a hydrothermal process, while the obtained AgIn₅S₈/TiO₂ heterojunction nanocomposites prepared by using commercially available TiO₂ nanoparticles (P25) as TiO₂ source exhibit remarkably improved photoactivity as compared to the pristine AgIn₅S₈, and the AgIn₅S₈/TiO₂ nanocomposite with molar ratio of 1:10 shows a maximum photocatalytic H₂ evolution rate (371.1 μmol h⁻¹), which is 4.3 times higher than that (85 μmol h⁻¹) of the corresponding AgIn₅S₈/TiO₂ nanocomposite derived from a hydrothermal method. This significant enhancement in the photocatativity of the present AgIn₅S₈/TiO₂ nanocomposite can be ascribed to the better dispersion of the AgIn₅S₈ formed on TiO₂ nanoparticle surfaces and the more intimate AgIn₅S₈/TiO₂ heterojunction structure during the water bath deposition process under continuously stirring as compared to the corresponding nanocomposite derived from a hydrothermal method. This configuration of nanocomposite results in fast diffusion of the photogenerated carriers in AgIn₅S₈ towards TiO₂, which is beneficial for separating spatially the photogenerated carriers and improving the photoactivity. The present findings shed light on the tuning strategy of spectral responsive region and photoactivity of photocatalysts for efficient light-to-energy conversion.     

Al2O3-coated nanoporous TiO2 electrode for solid-state dye-sensitized solar cell

This paper reports the preparation of a core-shell nanoporous electrode consisting of an inner TiO₂ porous matrix and a thin overlayer of Al₂O₃, and its application for solid-state dye-sensitized solar cell using p-CuI as hole conductor. Al₂O₃ overlayer was coated onto TiO₂ porous film by the surface sol–gel process. The role of Al₂O₃ layer thickness on the cell performance was investigated. The solar cells fabricated from Al₂O₃-coated electrodes showed superior performance to the bare TiO₂ electrode. Under illumination of AM 1.5 simulated sunlight (89 mW/cm²), a ca. 0.19 nm Al₂O₃ overlayer increased the photo-to-electric conversion efficiency from 1.94% to 2.59%.     

High photocatalytic hydrogen production over the band gap-tuned urchin-like Bi2S3-loaded TiO2 composites system

A new system using Bi₂S₃-loaded TiO₂ photocatalysts (Bi₂S₃/TiO₂) was developed to enhance the production of hydrogen. The Bi₂S₃ (5, 10, 15 wt%) particles in an urchin-like morphology with a length of about 2∼3 μm and a diameter of 15–20 nm, which can absorb all wavelengths in UV–visible radiation, were prepared by solvothermal method and loaded onto nano-sized TiO₂ (10∼15 nm) for photocatalysis on hydrogen production. The evolution of H₂ from methanol/water (1:1) photo splitting over the Bi₂S₃/TiO₂ composite in the liquid system was enhanced, compared with that over pure TiO₂ and Bi₂S₃. In particular, 14.2 ml of H₂ gas was produced after 12 h when 0.5 g of a 10 wt% Bi₂S₃/TiO₂ composite was used. On the basis of cyclic voltammetry (CV) results, the high photoactivity was attributed to the increase of band gap in the Bi₂S₃/TiO₂ composite, due to the decreased recombination between the excited electrons and holes.     

Enhancement of photoelectrochemical response by Au modified in TiO2 nanorods

We report on the design and synthesis of a novel Au/TiO₂/Au heterostructure and its implementation as a photoanode for photoelectrochemical (PEC) application. The Au/TiO₂/Au heterostructure was produced by assembling Au nanoparticles and TiO₂ nanorods (NRs) onto FTO substrate, followed by electrodepositing Au nanoparticles on the TiO₂NRs. Field emission scanning electron microscopy (FESEM), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and electrochemical methods were adopted to characterize the prepared photoanodes. Compared to the system involving Au nanoparticles directly linked to TiO₂, this Au/TiO₂/Au heterostructure exhibits significant improved photoresponse as a photoanode, as demonstrated good performance in PECs. This study illustrates the importance of pre-deposited Au underlayers in influencing PEC properties of hybrid assembled nanostructures. As the Au/TiO₂NRs/Au photoanodes are easily fabricated and highly stable, Au/TiO₂NRs/Au can serve as a good substitution for TiO₂ in a variety of solar energy driven applications including PEC water splitting, photocatalysis, and solar cells.     

Facile preparation and size-dependent photocatalytic activity of Cu2O nanocrystals modified titania for hydrogen evolution

Degussa TiO₂ powder (P25) with Cu₂O nanocrystals of different sizes deposited on the surface were prepared by a facile ethanol-induced deposition followed with a calcination process at 350 °C and characterized by XRD, XPS, HRTEM and UV–Vis diffuse reflectance spectra, respectively. In our protocol, Cu₂O nanocrystals is formed by reducing Cu(II) with the ethanol adsorbed on the surface of P25. The absorption edge as well as photocatalytic activity for H₂ evolution are closely related to the size of the Cu₂O nanocrystals depending on the Cu content in the as-prepared composites. The 0.9 mol% Cu₂O/TiO₂ composite with ca. 4 nm Cu₂O nanocrystals exhibits the highest photocatalytic H₂ evolution rate of 318 μmol h⁻¹ under the illumination of simulant solar light and an apparent quantum efficiency of 28.6% at 365 nm, 397 times higher than that of P25. This enhancement is mainly attributed to the quantum confinement effect of quantum-sized Cu₂O nanocrystals (q-Cu₂O), which can upgrade the conduction band bottom of q-Cu₂O, and thus facilitates the effective separation of photogenerated charge carriers to enhance the photocatalytic activity. The results provided here not only offers a green and simple way for depositing q-Cu₂O on the surfaces of P25 to get the photocatalyst with an excellent photocatalytic activity for H₂ evolution, but also sheds a new insight for the fabrication of efficient p–n heterojunctions for the separation of electron-hole pairs by quantum confinement effect.     

Photocatalytic hydrogen production over CuO and TiO2 nanoparticles mixture

Cheap and efficient photocatalysts were fabricated by simply mixing TiO₂ nanoparticles (NPs) and CuO NPs. The two NPs combined with each other to form TiO₂/CuO mixture in an aqueous solution due to the opposite surface charge. The TiO₂/CuO mixture exhibited photocatalytic hydrogen production rate of up to 8.23 mmol h⁻¹ g⁻¹ under Xe lamp irradiation when the weight ratio of P25 to CuO was optimized to 10. Although the conduction band edge position of CuO NPs is more positive than normal hydrogen electrode, the TiO₂/CuO mixture exhibited good photocatalytic hydrogen production performance because of the inter-particle charge transfer between the two NPs. The detailed mechanism of the photocatalytic hydrogen production is discussed. This mixing method does not require a complicated chemical process and allows mass production of the photocatalysts.     

Fabrication and comparison of highly efficient Cu incorporated TiO2 photocatalyst for hydrogen generation from water

Efficient Cu incorporated TiO₂ (Cu–TiO₂) photocatalysts for hydrogen generation were fabricated by four methods: in situ sol–gel, wet impregnation, chemical reduction of Cu salt, and in situ photo-deposition. All prepared samples are characterized by good dispersion of Cu components, and excellent light absorption ability. Depending on the preparation process, hydrogen generation rates of the as-prepared Cu–TiO₂ were recorded in the range of 9–20 mmol h⁻¹ g_catalyst⁻¹, which were even more superior to some noble metal (Pt/Au) loaded TiO₂. The various fabrication methods led to different chemical states of Cu, as well as different distribution ratio of Cu between surface and bulk phases of the photocatalyst. Both factors have been proven to influence photocatalytic hydrogen generation. In addition, the Cu content in the photocatalyst played a significant role in hydrogen generation. Among the four photocatalysts, the sample that was synthesized by in situ sol–gel method exhibited the highest stability. High efficiency, low cost, good stability are some of the merits that underline the promising potential of Cu–TiO₂ in photocatalytic hydrogen generation.     

TiO2 nanotubes coupled with nano-Cu(OH)2 for highly efficient photocatalytic hydrogen production

Noble-metal-free Cu(OH)₂/TNTs (TNTs: TiO₂ nanotubes) nanocomposite photocatalysts were successfully prepared by loading nano-Cu(OH)₂ on TNTs via a hydrothermal-precipitation process. These were then characterized in terms of morphology and physicochemical properties by employing TEM, XRD, XPS, BET, UV–Vis DRS and PL. The effects of Cu(OH)₂ loading, amount of catalyst on the photocatalytic hydrogen production performance of Cu(OH)₂/TNTs were investigated in detail in aqueous methanol solution under UV irradiation. The results show that, compared with pure TNTs, the TNTs loaded with highly dispersed 8 wt% Cu(OH)₂ exhibited remarkably improved activity for hydrogen production (the largest quantity of evolved hydrogen was ca. 14.94 mmol h⁻¹ g⁻¹ catalyst) with good photostability. This high activity is attributed to the strong synergistic function of Cu(OH)₂/TNTs, including suitable potential of Cu(OH)₂/Cu (E⁰ = −0.222 V) between conduction band (−0.260 V) of TNTs and the reduction potential of H⁺/H₂ (E⁰ = 0.000 V), a unique tubular microstructure of TNTs coated with nano-Cu(OH)₂, large BET specific surface area and high dispersion of Cu(OH)₂. Furthermore, a process mechanism for methanol/water decomposition over Cu(OH)₂/TNTs is proposed to understand its high activity.