Hydrogen storage in Co-and Zn-based metal-organic frameworks at ambient temperature

Hydrogen adsorption properties of some Co-and Zn-based Metal-Organic Framework (MOF) materials were studied at near ambient temperatures. Maximal hydrogen storage capacity of 0.75 wt% was found for a Zn-based material at 175 Bar hydrogen pressure and T = −4 °C. Hydrogen adsorption correlated linearly with BET surface area and strongly depends on temperature. Relatively low structural stability of some MOF's results in framework collapse during degassing and hydrogen adsorption measurements.     

Potential application of metal-organic frameworks (MOFs) for hydrogen storage: Simulation by artificial intelligent techniques

Metal-organic frameworks are a new class of materials for hydrogen adsorption/storage applications. The hydrogen storage capacity of this structure is typically related to pressure, temperature, surface area, and adsorption enthalpy. Literature provides no reliable correlation for estimating the hydrogen uptake capacity of MOFs from these easy-measured variables. Therefore, this study introduces several straightforward and accurate artificial intelligence (AI) techniques to fill this gap, initially determining the appropriate topology of AI-based methods, then comparing their performances by statistical criteria, and introducing the most accurate. This study used artificial neural networks, hybrid neuro-fuzzy systems, and support vector machines as estimators. The general regression neural networks (GRNN) with a spread of 7.92 × 10⁻⁴ shows the highest correlation with the literature data and provides a relative absolute deviation of 5.34%, mean squared error of 0.059, and coefficient of determination of 0.9946.     

Hydrogen storage in zeolite imidazolate frameworks. A multiscale theoretical investigation

A multiscale approach is used to investigate the hydrogen adsorption in nanoporous Zeolite Imidazolate Frameworks (ZIFs) on varying geometries and organic linkers. Ab initio calculations are performed at the MP2 level to obtain correct interaction energies between hydrogen molecules and the ZIF structures. Subsequently, classical grand canonical Monte-Carlo (GCMC) simulations are carried out to obtain the hydrogen uptake of ZIFs at different thermodynamic conditions of pressure and temperature.     

Crown-like Zn0.5Cd0.5S/M-TiO2 composites derived from metal-organic frameworks for photocatalytic hydrogen production

Photocatalytic hydrogen production has been recognized as one of the most desirable approaches to overcome the worldwide energy and environmental issues. Here, novel sea urchin-like Zn_0.5Cd_0.5S and mesoporous TiO₂ (M-TiO₂) are designed, and a series of crown-like Zn_0.5Cd_0.5S/M-TiO₂ composites with different contents of M-TiO₂ are synthesized by hydrothermal method. The optimum hydrogen production rate of composites reaches 180.4 mmolh^?1g^?1 with the AQE up to 48.9% at 420 nm, which is 3.5 and 216 times that of pure Zn_0.5Cd_0.5S and the M-TiO₂, respectively. The outstanding performance of optimized Zn_0.5Cd_0.5S/M-TiO₂ composite prepared in this work exceeds most reported Cd-S-based catalysts. The improvement on the photocatalytic performance of composites is mainly due to the enlarged specific surface area, the exposure of more active sites, and the enhancement of the electron-hole separation efficiency.     

Catenated metal-organic frameworks: Promising hydrogen purification materials and high hydrogen storage medium with further lithium doping

Based on the first-principles derived force fields and grand canonical Monte Carlo simulations, we find that the catenated metal-organic frameworks outperform the noncatenated structures, in terms of H₂ separation from other gases (CH₄, CO and CO₂) and H₂ adsorption by Li doping. A system utilizing IRMOF-11 (or IRMOF-13) for hydrogen separation and Li-doped IRMOF-9 for hydrogen storage is therefore proposed, with hydrogen uptake of 4.91 wt% and 36.6 g/L at 243 K and 100 bar for Li-doped IRMOF-9, which is close to the 2017 DOE target. It is promising to find appropriate microporous materials for hydrogen purification and storage at ambient conditions with structure catenated.     

Thermally stable Ni MOF catalyzed MgH2 for hydrogen storage

The poor kinetics is the main issue hindering MgH₂ for practical hydrogen storage application. In this work, the tricarboxybenzene was used to construct the stable Ni MOF (Ni-BTC300) as the catalyst for MgH₂. The prepared MOFs maintained their chemical structure after 300 °C calcining and doped to MgH₂ by ball milling. The dispersed, uniformly bonded Ni atoms can improve the kinetics of the composites, which could desorb 5.14 wt% H₂ within 3 min at 300 °C. And the stable MOF structure leading to good cycle stability in both kinetics and capacity, with retention of 98.2% after 10 cycles.     

Effect of platinum doping of activated carbon on hydrogen storage behaviors of metal-organic frameworks-5

In this work, we prepared platinum doped on activated carbons/metal-organic frameworks-5 hybrid composites (Pt-ACs-MOF-5) to obtain a high hydrogen storage capacity. The surface functional groups and surface charges were confirmed by Fourier transfer infrared spectroscopy (FT-IR) and zeta-potential measurement, respectively. The microstructures were characterized by X-ray diffraction (XRD). The sizes and morphological structures were also evaluated using a scanning electron microscopy (SEM). The pore structure and specific surface area were analyzed by N₂/77 K adsorption/desorption isotherms. The hydrogen storage capacity was studied by BEL-HP at 298 K and 100 bar. The results revealed that the hydrogen storage capacity of the Pt-ACs-MOF-5 was 2.3 wt.% at 298 K and 100 bar, which is remarkably enhanced by a factor of above five times and above three times compared with raw ACs and MOF-5, respectively. In conclusion, it was confirmed that Pt particles played a major role in improving the hydrogen storage capacity; MOF-5 would be a significantly encouraging material for a hydrogen storage medium as a receptor.     

Density functional study of hydrogen spillover on direct Pd-doped metal-organic frameworks IRMOF-1

The direct doping of small Pd cluster on IRMOF-1 and its influence on H₂ adsorption were investigated using periodic density functional methods. Our calculations indicate that the Pd cluster prefers to be deposited on the linker. The doped Pd cluster can not only play the important role for dissociating H₂ molecules, but also enhance the H interaction with IRMOF-1 by altering its electronic structures. As a result, hydrogen spillover in IRMOF-1 by directly doping Pd catalysts is thermodynamically feasible and the odd numbered H bottlenecks on undoped IRMOF-1 are eliminated. In addition, we discuss a working mechanism for releasing H₂ from the chemisorbed states.     

Enhancement of hydrogen adsorption by alkali-metal cation doping of metal-organic framework-5

Over the past decade, metal-organic frameworks (MOFs) have been extensively studied as a novel approach to store hydrogen. The large surface area and volume of micropores that are intrinsic to MOFs make them ideal for gas adsorption. In addition, we chemically reduced MOF-5 by doping it with alkali metals (Li, Na, and K). We found that the H₂ uptake capacity of MOF-5 materials doped with Li, Na, and K exceeded that of a neutral framework by 24%, 68%, and 70%, respectively. Notably, at the same levels of doping, the Li⁺-doped framework exhibited the strongest H₂ binding, and the binding strength decreased sequentially in the order Li⁺ > Na⁺ > K⁺.     

Concepts for improving hydrogen storage in nanoporous materials

Hydrogen storage in nanoporous materials has been attracting a great deal of attention in recent years, as high gravimetric H₂ capacities, exceeding 10 wt% in some cases, can be achieved at 77 K using materials with particularly high surface areas. However, volumetric capacities at low temperatures, and both gravimetric and volumetric capacities at ambient temperature, need to be improved before such adsorbents become practically viable. This article therefore discusses approaches to increasing the gravimetric and volumetric hydrogen storage capacities of nanoporous materials, and maximizing the usable capacity of a material between the upper storage and delivery pressures. In addition, recent advances in machine learning and data science provide an opportunity to apply this technology to the search for new materials for hydrogen storage. The large number of possible component combinations and substitutions in various porous materials, including Metal-Organic Frameworks (MOFs), is ideally suited to a machine learning approach; so this is also discussed, together with some new material types that could prove useful in the future for hydrogen storage applications.     

Improved hydrogen desorption properties of ammonia borane by Ni-modified metal-organic frameworks

Ammonia borane (AB) has attracted intensive study because of its low molecular weight and abnormally high gravimetric hydrogen capacity. However, the slow kinetics, irreversibility, and formation of volatile materials (borazine and ammonia) of AB limit its practical application. In this paper, new strategies by doping AB in metal-organic framework MIL-101 (denoted as AB/MIL-101) or in Ni modified MIL-101 (denoted as AB/Ni@MIL-101) are developed for hydrogen storage. In AB/MIL-101 samples, dehydrogenation did not present any induction period and undesirable by-product borazine, and decomposition thermodynamics and kinetics are improved. For AB/Ni@MIL-101, the peak temperature of AB dehydrogenation was shifted to 75 °C, which is the first report of such a big decrease (40 °C) in the decomposition temperature of AB. Furthermore, borazine and ammonia emissions that are harmful for proton exchange membrane fuel cells, were not detected. The interaction between AB and MIL-101 is discussed based on both theoretical calculations and experiments. Results show that Cr-N and B-O bonds have generated in AB/MIL-101 nanocomposites, and the decomposition mechanism of AB has changed.     

A model study of effect of M = Li,Na, Be,Mg, and Al ion decoration on hydrogen adsorption of metal-organic framework-5

The effect of light metal ion decoration of the organic linker in metal-organic framework MOF-5 on its hydrogen adsorption with respect to its hydrogen binding energy (ΔB.E.) and gravimetric storage capacity is examined theoretically by employing models of the form MC₆H₆:nH₂ where M = Li⁺, Na⁺, Be²⁺, Mg²⁺, and Al³⁺. A systematic investigation of the suitability of DFT functionals for studying such systems is also carried out. Our results show that the interaction energy (ΔE) of the metal ion M with the benzene ring, ΔB.E., and charge transfer (Q_trans) from the metal to benzene ring exhibit the same increasing order: Na⁺ < Li⁺ < Mg²⁺ < Be²⁺ < Al³⁺. Organic linker decoration with the above metal ions strengthened H₂-MOF-5 interactions relative to its pure state. However, amongst these ions only Mg²⁺ ion resulted in ΔB.E. magnitudes that were optimal for allowing room temperature hydrogen storage applications of MOF-5. A much higher gravimetric storage capacity (6.15 wt.% H₂) is also predicted for Mg²⁺-decorated MOF-5 as compared to both pure MOF-5 and Li⁺-decorated MOF-5.     

Simulation of hydrogen storage tank packed with metal-organic framework

Hydrogen adsorption in high surface metal-organic framework (MOF) has generated significant interest over the past decade. We studied hydrogen storage processes of MOF-5 hydrogen storage systems with adsorbents of both the MOF-5 powder (0.13 g/cm³) and its compacted tablet (0.30 g/cm³). The charge–discharge cycles of the two MOF-5 adsorbents were simulated and compared with activated carbon. The physical model is based on mass, momentum and energy conservation equations of the adsorbent-adsorbate system composed of gaseous and adsorbed hydrogen, adsorbent bed and tank wall. The adsorption process was modeled using a modified Dubinin–Astakov (D–A) adsorption isotherm and its associated variational heat of adsorption. The model was implemented by means of finite element analysis software Comsol Multiphysics™, and the system simulation platform Matlab/Simulink™. The thermal average temperature from Comsol simulation is used to fill the gap between the system model and the multi-dimensional models. The heat and mass transfer feature of the model was validated by the experiments of activated carbon, the simulated pressure and temperatures are in good agreement with the experimental results. The model was further validated by the metal-organic framework of Cu-BTC and is being extended its application to MOF-5 in this study. The maximum pressure in the powder MOF-5 tank is much higher than that in the activated carbon tank due to the lower adsorbent density of MOF-5 and resulting lower hydrogen adsorption. The maximum pressure in the compacted MOF-5 tank is a little bit lower than that in the activated carbon tank due to the higher adsorbent density and resulting higher hydrogen adsorption. The temperature swings during the charge–discharge cycle of both MOF-5 tanks are higher than that of the activated carbon tank. These are caused mainly by pressure work in the powder MOF-5 tank and by adsorption heat in the compacted MOF-5 tank. For both MOF-5 hydrogen storage systems, the lumped parameter models implemented by Simulink agree well with experimental pressures and with pressures and thermal average temperatures from Comsol simulation.     

Superalkali NLi4 decorated graphene: A promising hydrogen storage material with high reversible capacity at ambient temperature

This paper investigates the decoration of superalkali NLi₄ on graphene and the hydrogen storage properties by using first principles calculations. The results show that the NLi₄ units can be stably anchored on graphene while the Li atoms are strongly bound together in the superalkali clusters. Decoration using the superalkali clusters not only solve the aggregation of metal atoms, it also provide more adsorption sites for hydrogen. Each NLi₄ unit can adsorb up to 10 H₂ molecules, and the NLi₄ decorated graphene can reach a hydrogen storage capacity 10.75 wt% with an average adsorption energy ?0.21 eV/H₂. We also compute the zero-point energies and the entropy change upon adsorption based on the harmonic frequencies. After considering the entropy effect, the adsorption strengths fall in the ideal window for reversible hydrogen storage at ambient temperatures. So NLi₄ decorated graphene can be promising hydrogen storage material with high reversible storage capacities.     

Efficient synthesis for large-scale production and characterization for hydrogen storage of ligand exchanged MOF-74/174/184-M (M = Mg2+, Ni2+)

A semitechnical route (optimized by BASF SE) to synthesize MOF-74/174-M (M = Mg²⁺, Ni²⁺) efficiently in ton-scale production is presented with the goal of mobile and stationary gas storage applications especially for hydrogen as future energy carrier. In addition, a new member of these series of materials, MOF-184-M (M = Mg²⁺, Ni²⁺) is introduced using ligand exchange strategy in order to produce a more porous analogue (possessing large aperture) without loss of crystallinity. This family comprising MOF-74/174/184 are characterized systematically for hydrogen adsorption properties by volumetric measurements with a Sieverts’ apparatus. Replacing the linker by a longer one results in an increase of the BET area from 984 to 3154 m²/g and an enhancement of the excess cryogenic (77 K) hydrogen storage capacity from 1.8 to 4.7 wt%. The heat of adsorption of linker exchanged MOF-174/184 (as a function of uptake) shows similar values to the parent MOF-74, indicating successful construction of expanded MOFs in large scale production. Finally, a usable capacity of these MOFs is investigated for mobile application, revealing that the increasing surface area without strong binding metal sites through longer linker exchange is one of important parameters for improving usable capacity.     

Catalytic hydrolysis of hydrazine borane for chemical hydrogen storage: Highly efficient and fast hydrogen generation system at room temperature

There has been rapidly growing interest for materials suitable to store hydrogen in solid state for transportation of hydrogen that requires materials with high volumetric and gravimetric storage capacity. B-N compounds such as ammonia-triborane, ammonia-borane and amine-borane adducts are well suited for this purpose due to their light weight, high gravimetric hydrogen storage capacity and inclination for bearing protic (N-H) and hydridic (B-H) hydrogens. In addition to them, more recent study [26] has showed that hydrazine borane with a gravimetric hydrogen storage capacity of 15.4% wt needs to be considered as another B-N compound that can be used for the storage of hydrogen. Herein we report for the first time, metal catalyzed hydrolysis of hydrazine borane (N₂H₄BH₃, HB) under air at room temperature. Among the catalyst systems tested, rhodium(III) chloride was found to provide the highest catalytic activity in this reaction. In the presence of rhodium(III) chloride, the aqueous solution of hydrazine borane undergoes fast hydrolysis to release nearly 3.0 equivalent of H₂ at room temperature with previously unprecedented H₂ generation rate TOF = 12000 h⁻¹. More importantly, it was found that in the catalytic hydrolysis of hydrazine borane the reaction between hydrazine borane and water proceeds almost in stoichiometric proportion indicating that the efficient hydrogen generation can be achieved even from the highly concentrated solution of hydrazine borane or in the solid state when water added to the solid hydrazine borane. This finding is crucial especially for on-board application of the existing system. The work reported here also includes (i) finding the solubility of hydrazine borane plus its stability against self-hydrolysis in water, (ii) the definition of reaction stoichiometry and the identification of reaction products for the catalytic hydrolysis of hydrazine borane, (iii) the collection of wealthy kinetic data to demonstrate the effect of substrate and catalyst concentrations on the hydrogen generation rate and to determine the rate law for the catalytic hydrolysis of hydrazine borane, (iv) the investigation of the effect of temperature on the rate of hydrogen generation and determination of activation parameters (E_a, ΔH^#, and ΔS^#) for the catalytic hydrolysis of hydrazine borane.     

Pd (II) decorated conductive two-dimensional chromium-pyrazine metal-organic framework for rapid detection of hydrogen

The utilization of H₂ for versatile application has demanded highly selective, low cost and rapid hydrogen sensors that are proficient in sensing H₂ near flammability limit. In this report, Cr^IIICl₂(pyrazine)₂ MOF with negatively charged pyrazine linkers in its structure is used for the stabilization of Pd (II) via charge transfer interactions. This material design turned an innocent MOF into selective hydrogen sensor that can respond (through decrease in resistance under dynamic sensing setup) to H₂ in 5–7 s with a detection range of 0.25%–1% H₂ concentration. A correlation of H₂ sensing characteristics and the structure-property relationship is established using density functional theory (DFT) calculations. The calculations suggested that near fermi level in Pd^II@CrPy, the bandwidth increases upon interaction with H₂ thereby the phase space for electron delocalization increases leading to better carrier mobility. This new approach not only yields novel sensing properties but also enables limited usage of precious metal to develop cost-effective sensors.     

Computational screening of metal-organic frameworks with open copper sites for hydrogen purification

With the increasing demand for environmental protection worldwide, metal-organic frameworks (MOFs) have been pivotal in the clean energy domain. Due to the high surface areas, large porosities and structural tunability, they are promising for the adsorption separation of H₂/CH₄ mixtures. High-throughput computational screening was adopted to identify the optimal adsorbents for hydrogen purification from 502 MOFs with open copper sites. Firstly, the adsorption performance of H₂/CH₄ mixture in 440 MOFs, which exhibit non-zero surface area and over -3.8 Å largest cavity diameter (LCD), was calculated using grand canonical Monte Carlo (GCMC) simulations at 300 K and various pressures. Secondly, we identified the top 9 high-performance MOFs by evaluating the ranking of candidate adsorbent performance according to a combination metric of adsorption performance score (APS, the product of adsorption capacity of CH₄ and selectivity of CH₄ over H₂) and percent regenerability (R%). PCN-39 and MOF-505 exhibit high APS of 101 mol kg⁻¹ and 67.9 mol kg⁻¹, respectively, promising for hydrogen purification. Subsequently, the breakthrough curves of H₂/CH₄ mixture through the fixed bed packed with some optimal MOFs were predicted to evaluate their effects in practical hydrogen purification. UMODEH08 or UMOBEF04 exhibits the long dimensionless residence time over 30 of CH₄ for the H₂/CH₄ separation. Finally, we also explored the behaviors of the radial distribution functions (RDF) and adsorption equilibrium configurations to further demonstrate how the selected MOFs differentiate CH₄ from H₂. The investigation on all these observations at molecular level will pave the way for the development of new materials for clean energy applications.     

Transition metal decorated covalent triazine-based frameworks as a capacity hydrogen storage medium

From ab initio density functional theory (DFT) calculations, the structural stability and hydrogen adsorption capacity of transition metal (TM, TM = Sc, Ti, V, Cr, Mn) decorated covalent triazine-based framework (CTF) are discussed. It is found that by calculation, these TM atoms can adsorb on the CTF sheet without clusters. The Sc, Ti, V, Cr and Mn decorated CTF are predicated to bind five, four, three, three and two of hydrogen molecules. We found that Sc and Ti decorated CTF are suitable candidates for effective reversible hydrogen storage at near ambient condition, whereas V, Cr and Mn decorated CTF are not promising materials due to too large average bind energies per hydrogen molecule.