Morphological evaluation and phase behavior of PVDF/PEO blends in the presence of graphene nanoplatelets through rheological measurements

In this study, graphene nanoplatelets (GNPs) were incorporated into poly(vinylidene fluoride) (PVDF), poly(ethylene oxide) (PEO), and PVDF/PEO blends using solution casting method in order to achieve binary and ternary polymer nanocomposites. The focus of the work is on the compatibilizing effects of the GNPs on partially miscible PVDF/PEO blends. X-ray diffraction method, rheological measurements, scanning electron microscopy (SEM), and atomic force microscopy observations enabled us to track the dispersion state and localization of the graphene nanosheets in the nanocomposites. The results exhibited that the nanoplatelets were preferentially distributed through the PVDF phase and/or at the interface of the PVDF/PEO phases. Evaluation of the wetting parameter for the PVDF/PEO/GNPs nanocomposite also verified better affinity of the selected nanofiller with the PVDF component. Extend of the miscibility in the nanocomposites was studied by a well-known rheological method. A tangible increment in binodal (T_b) and spinodal (T_s) decomposition temperatures by addition of a very low content of the GNPs (0.5 wt %) revealed well-defined compatibilization effects of the graphene on this binary polymer blend. SEM images at different temperatures confirmed the rheologically determined liquid–liquid phase diagram. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 48017.     

Miscibility study of polymer blends composed of semirigid thermotropic liquid crystalline polycarbonate,poly(vinyl alcohol), and chitosan

Miscibility of binary and ternary polymer blends composed of thermotropic liquid crystalline polycarbonate (LCPC), poly(vinyl alcohol) (PVA), and chitosan was investigated by viscosity method, FTIR spectrum, and scanning electron microscope techniques. Effect of addition of chitosan as a compatibilizer on miscibility and morphology of binary LCPC/chitosan and PVA/chitosan and ternary LCPC/PVA/chitosan polymer blends was discussed. These measurements indicated that addition of chitosan into the blends of LCPC with PVA leads to an increase of miscibility and a formation of clear fibril structures on fractured surfaces, which are due to intermolecular hydrogen‐bonding interaction between LCPC, PVA, and chitosan chains. It was suggested that side‐chain hydroxy group of PVA and amino and hydroxy groups of chitosan play an important role in the formation of miscible phase and improvement of morphology in binary and ternary blends composed of LCPC, PVA, and chitosan. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 1616–1622, 2004     

Binary and ternary nanocomposites based on PVDF,PMMA, and PVDF/PMMA blends: polymorphism,thermal, and rheological properties

Binary and ternary nanocomposites based on poly(vinylidene fluoride) (PVDF), poly(methyl methacrylate) (PMMA), and PVDF/PMMA blends were successfully prepared through a melt-mixing process, using a commercial organoclay (15A) as the nanofiller. The 15A was more finely dispersed (intercalated/partially exfoliated) within the PVDF matrix compared with the PMMA matrix. A higher PVDF content in the ternary composite essentially led to a superior degree of 15A dispersion. The 15A addition induced the polar β-form PVDF crystals, whereas the presence of PMMA in ternary composites reduced the efficiency in promoting β-form formation by 15A. Adding 15A also enhanced the nucleation of PVDF, but the enhancement was inferior while PMMA was present. Conversely, the crystal growth of PVDF was retarded with the existence of 15A, and the PVDF/15A binary composite exhibited the greatest retardation. The equilibrium melting temperature (T_m°) of PVDF in the neat state and in the blends increased after 15A addition. The PVDF/15A binary composite possessed an evidently higher β-form T_m° than the α-form T_m° of neat PVDF (~20.1 °C rise). Similar effects on the individual components, 15A declined the thermal stability of PVDF but increased that of PMMA in the ternary composites. Rheological property measurements revealed that the ternary composites performed in-between that of individual PVDF/15A and PMMA/15A binary composites. A percolation of 15A (pseudo)network structure was developed in the composites, and a more elastic behavior was observed with increasing PVDF content in the composites.     

Crystallization behavior and hydrophilicity of poly(vinylidene fluoride)/poly(methyl methacrylate)/poly(vinyl pyrrolidone) ternary blends

Ternary blends composed of matrix polymer poly(vinylidene fluoride) (PVDF) with different proportions of poly(methyl methacrylate) (PMMA)/poly(vinyl pyrrolidone) (PVP) blends were prepared by melt mixing. The miscibility, crystallization behavior, mechanical properties and hydrophilicity of the ternary blends have been investigated. The high compatibility of PVDF/PMMA/PVP ternary blends is induced by strong interactions between the carbonyl groups of the PMMA/PVP blend and the CF₂ or CH₂ group of PVDF. According to the Fourier transform infrared and wide‐angle X‐ray difffraction analyses, the introduction of PMMA does not change the crystalline state (i.e. α phase) of PVDF. By contrast, the addition of PVP in the blends favors the transformation of the crystalline state of PVDF from non‐polar α to polar β phase. Moreover, the crystallinity of the PVDF/PMMA/PVP ternary blends also decreases compared with neat PVDF. Through mechanical analysis, the elongation at break of the blends significantly increases to more than six times that of neat PVDF. This confirms that the addition of the PMMA/PVP blend enhances the toughness of PVDF. Besides, the hydrophilicity of PVDF is remarkably improved by blending with PMMA/PVP; in particular when the content of PVP reaches 30 wt%, the water contact angle displays its lowest value which decreased from 91.4° to 51.0°. Copyright © 2011 Society of Chemical Industry     

Phase behavior of binary and ternary blends of poly(styrene‐co‐methacrylic acid), poly(styrene‐co‐4‐vinylpyridine), and poly(2,6‐dimethyl‐1,4‐phenylene oxide)

Poly(styrene‐co‐methacrylic acid) (PSMA) and poly(styrene‐co‐4‐vinylpyridine) (PS4VP) of different compositions were prepared and characterized. The phase behavior of these copolymers as binary PSMA/PS4VP mixtures or with poly(2,6‐dimethyl‐1,4‐phenylene oxide) (PPO) as PPO/PSMA or PPO/PS4VP and PPO/PSMA/PS4VP ternary blends was investigated by differential scanning calorimetry (DSC). This study showed that PPO was miscible with PS4VP containing up to 15 mol % 4‐vinylpyridine (4VP) but immiscible with PS4VP‐30 (where the number following the hyphen refers to the percentage 4VP in the polymer) and PSMA‐20 (where the number following the hyphen refers to the percentage methacrylic acid in the polymer) over the entire composition range. To examine the morphology of the immiscible blends, scanning electron microscopy was used. Because of the hydrogen‐bonding specific interactions that occurred between the carboxylic groups of PSMA and the pyridine groups of PS4VP, chloroform solutions of PSMA‐20 and PS4VP‐15 formed interpolymer complexes. The obtained glass‐transition temperatures (T_g's) of the PSMA‐20/PS4VP‐15 complexes were found to be higher than those calculated from the additivity rule. Although, depending on the content of 4VP, the shape of the T_g of the PPO/PS4VP blends changed from concave to S‐shaped in the case of the miscible blends, two T_g were observed with each PPO/PS4VP‐30 and PPO/PS4VP‐40 blend. The thermal stability of the PSMA‐20/PS4VP‐15 interpolymer complexes was studied by thermogravimetry. On the basis of the obtained results, the phase behavior of the ternary PPO/PSMA‐20/PS4VP‐15 blends was investigated by DSC. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Studies on binary and ternary blends of polypropylene with SEBS,PS, and HDPE. II. Tensile and impact properties

Studies are reported on tensile and impact properties of several binary and ternary blends of polypropylene (PP), styrene-b-ethylene-co-butylene-b-styrene triblock copolymer (SEBS), high-density polyethylene (HDPE), and polystyrene (PS). The blend compositions of the binary blends PP/X were 10 wt % X and 90 wt % PP, while those of the ternary blends PP/X/Y were 10 wt % of X and 90 wt % of PP/Y, or 10 wt % Y and 90 wt % PP/X (PP/Y and PP/X were of identical composition 90:10); X, Y being SEBS, HDPE, or PS. The results are interpreted for the effect of each individual component by comparing the binary blends with the reference system PP, and the ternary blends with the respective binary blends as the reference systems. The ternary blend PP/SEBS/HDPE showed properties distinctly superior to those of PP/SEBS/PS or the binary blends PP/SEBS and PP/HDPE. Differences in the tensile yield behavior of the different samples and their correlation with impact strength suggested shear yielding as the possible mechanism of enhancement of impact strength. Scanning electron microscopic study of the impact fractured surfaces also supports the shear yielding mechanism of impact toughening of these blends.     

Study of PS/SBS/nano-CaCO3 blends

Abstract

The effect of SBS and nano-CaCO₃ on the mechanical properties of PS blends was studied, and their morphologies were characterised by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The Izod impact strengths of notched samples of PS/SBS/CaCO₃ blends with nanometre particles of nano-CaCO₃ and SBS are higher than those of PS and PS/SBS blends with the same content of SBS, and the tensile strengths are higher than those of PS/SBS blends. The inclusion of nano-CaCO₃ within the dispersed phase of SBS enlarges the volume of the domains of SBS, which increases the toughness of the ternary blends (PS/SBS/CaCO₃). The mass ratio of SBS/CaCO ₃ plays an important role in the properties of the ternary blends because it affects the concentration of SBS in these blends, the dispersion of nano-CaCO₃ and the morphology of the ternary blends.     

Phase behavior of ternary blends containing dimethylpolycarbonate,tetramethylpolycarbonate and poly[styrene‐co‐(methyl methacrylate)] copolymers (or polystyrene)

The miscibility and phase behavior of ternary blends containing dimethylpolycarbonate (DMPC), tetramethylpolycarbonate (TMPC) and poly[styrene‐co‐(methyl methacrylate)] copolymer (SMMA) have been explored. Ternary blends containing polystyrene (PS) instead of SMMA were also examined. Blends of DMPC with SMMA copolymers (or PS) did not form miscible blends regardless of methyl methacrylate (MMA) content in copolymers. However, DMPC blends with SMMA (or PS) blends become miscible by adding TMPC. The miscible region of ternary blends is compared with the previously determined miscibility region of binary blends having the same chemical components and compositions. The region where the ternary blends are miscible is much narrower than that of binary blends. Based on lattice fluid theory, the observed phase behavior of ternary blends was analyzed. Even though the term representing the Gibbs free energy change of mixing for certain ternary blends had a negative value, blends were immiscible. It was revealed that a negative value of the Gibbs free energy change of mixing was not a sufficient condition for miscible ternary blends because of the asymmetry in the binary interactions involved in ternary blends. Copyright © 2004 Society of Chemical Industry     

Investigation on crystallization behavior and hydrophilicity of poly(vinylidene fluoride)/poly(methyl methacrylate)/poly(vinyl pyrrolidone) ternary blends by solution casting

Ternary blends composed of matrix polymer poly(vinylidene fluoride) (PVDF) with different proportions of poly(methyl methacrylate) (PMMA)/poly(vinyl pyrrolidone) (PVP) blends were prepared by solution casting. The crystallization behavior and hydrophilicity of ternary blends were characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), wide angle X‐ray diffraction (WAXD), differential scanning calorimetry (DSC), and contact angle test. According to morphological analysis, the surface was full of typical spherulitic structure of PVDF and the average diameter was in the order of 3 μm. The samples presented predominantly β phase of PVDF by solution casting. It indicated that the size of surface spherulites and crystalline phase had little change with the PMMA or PVP addition. Moreover, FTIR demonstrated special interactions among the ternary polymers, which led to the shift of the carbonyl stretching absorption band of PVP. On the other hand, the melting, crystallization temperature, and crystallinity of the blends had a little change compared with the neat PVDF in the first heating process. Except for the content of PVP containing 30 wt %, the crystallinity of PVDF decreased remarkably from 64% to 33% and the value of t_1/2 was not obtained. Besides, the hydrophilicity of PVDF was remarkably improved by blending with PMMA/PVP, especially when the content of PVP reached 30 wt %, the water contact angle displayed the lowest value which decreased from 98.8° to 51.0°. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Melt rheology and interfacial properties of binary and ternary blends of PS,EOC, and SEBS

This works systematically investigates the interfacial properties of the binary and the ternary blends based on polystyrene (PS), ethylene octene copolymer (EOC), and styrene–ethylene–butylene–styrene (SEBS) by analyzing the melt linear rheological behavior of the blends and neat components. Moreover, the relationship between rheology, phase morphology, and mechanical properties of PS/EOC ternary blends with various quantities of SEBS were studied. The surface shear modulus (β) and interfacial tension values obtained by Palierne model indicated that the EOC/SEBS blend has the best interfacial properties, while the lowest interaction was found for PS/EOC blend. Based on the Palierne model and Harkin's spreading coefficients a core–shell type morphology with EOC phase encapsulated by the SEBS shell dispersed in the PS matrix was determined for the ternary blends. Scanning electron microscopy results revealed that both fibrillar and droplet forms of dispersed phase could be developed during the blending of PS and EOC in presence of SEBS. The extent of fibrillar morphology and interfacial interactions in PS/EOC/SEBS ternary blends was dependent on the SEBS content. The improvement of the mechanical properties of PS/EOC blends in the presence of SEBS was evidenced by the tensile and impact resistance experiments. The tensile strength reinforcement was more pronounced for the ternary blends with more fibrillar dispersed phase. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48791.     

Phase behavior of blends of poly(2,6-dimethyl-1,4-phenylene oxide)/polystyrene/poly(o-chlorostyrene-co-p-chlorostyrene) copolymer

The phase behavior of ternary blends of poly(2,6-dimethyl-1,4-phenylene oxide) (PPO), polystyrene (PS) and a 50/50 mole % statistical copolymer of o-chlorostyrene and p-chlorostyrene [p(oClS-pClS)] has been investigated by differential scanning calorimetry (DSC) and analyzed in terms of a Flory-Huggins mean-field segmental interaction parameter treatment. Both PS/PPO and PPO/p(oClS-pClS) binary blends exhibit single glass transition temperatures over the full composition range whereas the PS/p(oClS-pClS) system displays a substantial immiscibilty window which extends into the ternary phase diagram. In principle, ternary systems provide enhanced opportunities relative to binary systems for evaluating segmental interaction parameters χ_ijs from experimental data because of the high sensitivity of phase boundary locations to these parameters and to component molecular weights. In this system the effect of these parameters on the phase boundary was studied experimentally and compared to calculated values.     

Glass transition behavior of polypropylene/polystyrene/styrene-ethylene-propylene block copolymer blends

Summary The glass transition behavior of ternary blends of polypropylene (PP), polystyrene (PS) and styrene-ethylene-propylene-styrene block copolymer (SEPS) was investigated. The blends were prepared by an internal mixer, and their dynamic mechanical properties and morphology were measured. The blends showed phase inversion at around 75wt% PS composition. The glass transition temperature (T_g) of the PP phase shifted to lower temperature as the PS contents were increased in PP/PS binary blends, probably due to the mismatch of thermal expansion coefficients between two components. As the SEPS copolymer contents were increased, the T_g's of the PP phase in the blends increased. In particular, the large increase in T_g of the PP phase was observed in the PP/PS (25/75) blends where the phase inversion takes place. Received: 2 February 1998/Revised version: 24 March 1998/Accepted: 13 April 1998     

Preparation and properties of PVDF/PVA hollow fiber membranes

On principle of polymer blend phase separation, PVDF/PVA hollow fiber membranes were prepared using phase inversion method. The membrane morphology and performance varied with the blending ratio. The PVDF/PVA blends showed incompatibility by the results of dynamic mechanical analysis (DMA) and infrared attenuated total reflection (FTIR-ATR) sampling technique. Based on bursting pressure and tensile strengths results, we suggest that the mechanical properties of PVDF/PVA blend membranes are worse than that of PVDF membrane. PVA can improve the hydrophilicity of PVDF/PVA hollow fiber membranes, which could be illuminated by the decrease in contact angle, the increase in equilibrium water content (EWC) and the variety in dynamic moisture regain. The pure water flux increases while the rejection ratio decreases with PVA content increasing. Moreover, PVA can improve the anti-fouling property of PVDF/PVA hollow fiber membranes, which could be illuminated by the result of increase coefficient of resistance.     

Tensile,stress-strain and creep rupture properties of poly (vinyl chloride)/poly(neopentyl glycol adipate)/poly(vinylidene fluoride) blends

Poly (vinyl chloride), PVC, and poly(vinylidene fluoride), PVDF, are incompatible polymers. Poly(neopentyl glycol adipate), PDPA, is miscible with both PVC and PVDF. With PDPA acting as a compatibilizer between PVC and PVDF. compatible PVC/PDPA/PVDF blends can be formed at PVDF content of about less than 50wt%. Above 50wt% PVDF the ternary blends exist in two phases exhibiting two glass transition temperatures, T_g, PVC is the main contributor to the mechanical strength while PDPA and PVDF contribute to the elastic properties of these blends. A compatible blend of 55/22.5/22.5 wt% PVC/PDPA/PVDF exhibiting one single T_g appears to show an interesting balance of the properties of the blend components.     

Polystyrene and polyester polyurethane elastomer blends compatibilized by SMA

Blends of polystyrene (PS) with polyester polyurethane elastomer (PU‐es) were compatibilized by addition of poly(styrene‐co‐maleic anhydride) (SMA) containing 7 wt % of maleic anhydride. Binary nonreactive (PS/PU‐es) blends, binary reactive (SMA/PU‐es) blends, and ternary reactive blends (PS/SMA/PU‐es) were prepared with 10 and 20 wt % of PU‐es. The maleic anhydride content in the ternary reactive blends was varied through addition of different SMA amounts from 0.5 to 5 wt %. Polyurethane in the blends was crosslinked by using dicumyl peroxide or sulfur to improve its mechanical properties. The experimental processing conditions, such as temperature and rotor speed in an internal mixer, were analyzed before blend preparation by processing the individual polymers, PS and SMA, and the PS/PU‐es nonreactive blend (90/10), to prevent the degradation of the polymer during melt mixing and to assure macroscopic homogeneity. The torque behavior during the mixture indicated a grafting copolymerization, which was responsible for the significant drop of the PU‐es domain size in the glassy matrix, as observed by scanning electronic microscopy (SEM). The miscibility of the glassy matrix, which was shown to be dependent on the composition and the phase behavior of ternary blends, became very complex as the SMA concentration increased, as concluded from dynamical–mechanical analysis. Blends containing 20 wt % of PU‐es presented an increase up to a factor of 2 in the deflection at break in relation to PS. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 2297–2304, 2004     

Generation of microcellular foams of PVDF and its blends using supercritical carbon dioxide in a continuous process

Use of supercritical carbon dioxide (scCO₂) as a blowing agent to generate microcellular polymer foams (MPFs) has recently received considerable attention due to environmental concerns associated with conventional organic blowing agents. While such foams derived from amorphous thermoplastics have been previously realized, semicrystalline MPFs have not yet been produced in a continuous scCO₂ process. This work describes the foaming of highly crystalline poly(vinylidene fluoride) (PVDF) and its blends with amorphous polymers during extrusion. Foams composed of neat PVDF and immiscible blends of PVDF with polystyrene exhibit poor cell characteristics, whereas miscible blends of PVDF with poly(methyl methacrylate) (PMMA) yield foams possessing vastly improved morphologies. The results reported herein illustrate the effects of blend composition and scCO₂ solubility on PVDF/PMMA melt viscosity, which decreases markedly with increasing PMMA content and scCO₂ concentration. Morphological characterization of microcellular PVDF/PMMA foams reveals that the cell density increases as the PMMA fraction is increased and the foaming temperature is decreased. This study confirms that novel MPFs derived continuously from semicrystalline polymers in the presence of scCO₂ can be achieved through judicious polymer blending.     

Characterization of interfaces in Poly (styrene-co-acrylonitrile) (SAN) based ternary polymer blends: A new approach from positron lifetime spectroscopy

Positron lifetime spectroscopy is used to develop a new approach to characterize the individual interfaces in ternary polymer blends and hence determine composition dependent miscibility level. This approach has its genesis in KSR and KRZ models for the evaluation of hydrodynamic interaction parameters (α_ij). The method successfully applied for binary blends (single interface) earlier is theoretically modified for ternary blends and experimentally verified by measuring free volume content in blends and their constituents. We have tested the efficacy of this method in two ternary blends namely SAN/PVC/PMMA and SAN/EVA/PVC at different compositions. The effective hydrodynamic parameter α_eff evaluated using individual α values turns out to be handy in predicting the overall miscibility level of a ternary blend. Results show that SAN/PVC/PMMA exhibits maximum α_eff of ?9.67 at composition 75/5/20 and SAN/EVA/PVC shows ?3.18 at 50/35/15 indicating that miscibility level is high at these compositions for these two blends. DSC and SEM studies have also been used to supplement positron results.     

Decreasing miscibility with greater heterogeneity in ternary polymer blend: poly(cyclohexyl methacrylate), poly(α‐methyl styrene) and poly(4‐methyl styrene)

A ternary blend system comprising poly(cyclohexyl methacrylate) (PCHMA), poly(α‐methyl styrene) (PαMS) and poly(4‐methyl styrene) (P4MS) was investigated by thermal analysis, optical and scanning electron microscopy. Ternary phase behaviour was compared with the behaviour for the three constituent binary pairs. This study showed that the ternary blends of PCHMA/PαMS/P4MS in most compositions were miscible, with an apparent glass transition temperature (T_g) and distinct cloud‐point transitions, which were located at lower temperatures than their binary counterparts. However, in a closed‐loop range of compositions roughly near the centre of the triangular phase diagram, some ternary blends displayed phase separation with heterogeneity domains of about 1 µm. Therefore, it is properly concluded that ternary PCHMA/PαMS/P4M is partially miscible with a small closed‐loop immisciblity range, even though all the constituent binary pairs are fully miscible. Thermodynamic backgrounds leading to decreased miscibility and greater heterogeneity in a ternary polymer system in comparison with the binary counterparts are discussed. © 2003 Society of Chemical Industry     

Application of a statistical method to study the spherulitic growth of polymer blends

This paper has two objectives. Firstly, to plan experimental blends (based on PVDF, PMMA and PVA) according to a statistical method proposed by Scheffé and subsequently to apply the model to the study of the spherulitic growth of PVDF with the aim of assess its suitability. In case it proved adequate, a simple method would become for the design of new materials from the polymer under study. Received: 12 August 1996/Revised: 13 February 1997/Accepted: 10 March 1997     

Morphological effects on glass transition behavior in selected immiscible blends of amorphous and semicrystalline polymers

The effects uncompatibilized immiscible polymer blend compositions on the T_g of the amorphous polymer were studied in the systems polystyrene/polypropylene (PS/PP), polystyrene/high density polyethylene (PS/PE) and polycarbonate/high density polyethylene (PC/PE). In the two similar systems of PS/PP and PS/PE, the T_g of PS increased with decreasing PS percentage in the blends. This variation in glass transition is attributed to the polymer domain interactions resulting from the different morphologies of various blend compositions. Experiments were conducted to study these effects by preparing blends with various polymers that varied the relationship between the T_g of the amorphous polymer and the crystallization behavior of the semicrystalline polymer. Results show that the variation in amorphous component T_g with composition depends strongly on the physical state of the semicrystalline domains. Whereas the T_g of PS in PS/PE blends changed with composition, the T_g of PC in the PC/PE blend did not change with composition.