Dopant‐Free,Amorphous–Crystalline Heterophase SnO2 Electron Transport Bilayer Enables >20% Efficiency in Triple‐Cation Perovskite Solar Cells

Improving the ohmic contact and interfacial morphology between an electron transport layer (ETL) and perovskite film is the key to boost the efficiency of planar perovskite solar cells (PSCs). In the current work, an amorphous–crystalline heterophase tin oxide bilayer (Bi‐SnO₂) ETL is prepared via a low‐temperature solution process. Compared with the amorphous SnO₂ sol–gel film (SG‐SnO₂) or the crystalline SnO₂ nanoparticle (NP‐SnO₂) counterparts, the heterophase Bi‐SnO₂ ETL exhibits improved surface morphology, considerably fewer oxygen defects, and better energy band alignment with the perovskite without sacrificing the optical transmittance. The best PSC device (active area ≈ 0.09 cm²) based on a Bi‐SnO₂ ETL is hysteresis‐less and achieves an outstanding power conversion efficiency of ≈20.39%, which is one of the highest efficiencies reported for SnO₂‐triple cation perovskite system based on green antisolvent. More fascinatingly, large‐area PSCs (active areas of ≈3.55 cm²) based on the Bi‐SnO₂ ETL also achieves an extraordinarily high efficiency of ≈14.93% with negligible hysteresis. The improved device performance of the Bi‐SnO₂‐based PSC arises predominantly from the improved ohmic contact and suppressed bimolecular recombination at the ETL/perovskite interface. The tailored morphology and energy band structure of the Bi‐SnO₂ has enabled the scalable fabrication of highly efficient, hysteresis‐less PSCs.     

Rubidium Fluoride Modified SnO2 for Planar n-i-p Perovskite Solar Cells

Regulating the electron transport layer (ETL) has been an effective way to promote the power conversion efficiency (PCE) of perovskite solar cells (PSCs) as well as suppress their hysteresis. Herein, the SnO₂ ETL using a cost-effective modification material rubidium fluoride (RbF) is modified in two methods: 1) adding RbF into SnO₂ colloidal dispersion, F and Sn have a strong interaction, confirmed via X-ray photoelectron spectra and density functional theory results, contributing to the improved electron mobility of SnO₂; 2) depositing RbF at the SnO₂/perovskite interface, Rb⁺ cations actively escape into the interstitial sites of the perovskite lattice to inhibit ions migration and reduce non-radiative recombination, which dedicates to the improved open-circuit voltage (V_oc) for the PSCs with suppressed hysteresis. In addition, double-sided passivated PSCs, RbF on the SnO₂ surface, and p-methoxyphenethylammonium iodide on the perovskite surface, produces an outstanding PCE of 23.38% with a V_oc of 1.213 V, corresponding to an extremely small V_oc deficit of 0.347 V.     

Multifunctional Aminoglycoside Antibiotics Modified SnO2 Enabling High Efficiency and Mechanical Stability Perovskite Solar Cells

SnO₂ as an electron transport layer (ETL) has been widely used in regular planar perovskite solar cells (PSCs) owing to its high optical transmittance, less photocatalytic activity, and low-temperature processing. However, SnO₂-based PSCs still face many challenges which greatly impair their efficiency and stability of PSCs. Herein, a novel and effective multifunctional modification strategy is proposed by incorporating streptomycin sulfate (STRS) molecules with multiple functional groups into SnO₂ ETL. STRS can significantly suppress SnO₂ nanoparticle agglomeration, improve the electronic property of SnO₂, as well as reduce nonradiative recombination. At the same time, interfacial residual tensile stress is released and the interfacial energy level alignment becomes more matched. As a result, the STRS-modified PSCs achieve a higher efficiency of 22.89% compared to 20.61% of the control device and exhibit a hysteresis-free feature. The humidity and thermal stability of PSCs based on STRS-SnO₂ are significantly improved. Furthermore, the efficiency of flexible devices increased from 19.74% to 20.79%, and the devices still maintain >80% of initial PCE after 4500 bending cycles with a bend radius of 5 mm. This study provides a low-cost, facile, and efficient strategy for achieving high efficiency and stability in PSCs.     

Review on the Application of SnO2 in Perovskite Solar Cells

SnO₂ has been well investigated in many successful state‐of‐the‐art perovskite solar cells (PSCs) due to its favorable attributes such as high mobility, wide bandgap, and deep conduction band and valence band. Several independent studies show the performances of PSCs with SnO₂ are higher than that with TiO₂, especially in device stability. In 2015, the first planar PSCs were reported with a power conversion efficiency over 17% using a low temperature sol‐derived SnO₂ nanocrystal electron transport layer (ETL). Since then, many other groups have also reported high performance PSCs based on SnO₂ ETLs. SnO₂ planar PSCs show currently the highest performance in planar configuration devices (21.6%) and are close to the record holder of TiO₂ mesoporous PSCs, suggesting their high potential as ETLs in PSCs. The main concerns with the application of SnO₂ as ETL are that it suffers from degradation in high temperature processes and that its much lower conduction band compared to perovskite may result in a voltage loss of PSCs. Here, notable achievements to date are outlined, the unique attributes of SnO₂ as ETLs in PSCs are described, and the challenges facing the successful development of PSCs and approaches to the problems are discussed.     

Bottom-contact passivation for high-performance perovskite solar cells using TaCl5-doped SnO2 as electron-transporting layer

Organic-inorganic hybrid perovskite solar cells (PSCs) possess the promising potential to substitute photovoltaic technologies in the traditional model. The modified SnO₂ as an electron-transporting layer (ETL) has been studied extensively because of its excellent properties. Herein, we implemented the TaCl₅ doped SnO₂ ETL in the n-i-p structure perovskite solar cells. The doped SnO₂ solution was demonstrated the characterization of neutral power of value and hydrophobicity. The conduction band of changed ETLs shifted downward by 0.26 eV resulting in the efficient electron transfer. Furthermore, the doped SnO₂ films affect the perovskite crystallite size with passivated traps and reduced nonradiative recombination loss. After employing TaCl₅-doped SnO₂ ETL, the open-circuit voltage enhances from 0.97 to 1.08 V and a united power conversion efficiency increases from 16.38% to 18.23% achieved when adopted 1.0 wt% doped TaCl₅–SnO₂ TEL. The developed doping method provides an effective method to passivate SnO₂ for fabricating high-performance perovskite solar cells.     

Spidermen Strategy for Stable 24% Efficiency Perovskite Solar Cells

The interface energetics-modification plays an important role in improving the power conversion efficiency (PCE) among the perovskite solar cells (PSCs). Considering the low carrier mobility caused by defects in PSCs, a double-layer modification engineering strategy is adopted to introduce the “spiderman” NOBF₄ (nitrosonium tetrafluoroborate) between tin dioxide (SnO₂ and perovskite layers. NO⁺, as the interfacial bonding layer, can passivate the oxygen vacancy in SnO₂, while BF₄⁻ can optimize the defects in the bulk of perovskite. This conclusion is confirmed by theoretical calculation and transmission electron microscopy (TEM). The synergistic effect of NO⁺ and BF₄⁻ distinctly heightens the carrier extraction efficiency, and the PCE of PSCs is 24.04% with a fill factor (FF) of 82.98% and long-term stability. This study underlines the effectiveness of multifunctional additives in improving interface contact and enhancing PCE of PSCs.     

A Band‐Edge Potential Gradient Heterostructure to Enhance Electron Extraction Efficiency of the Electron Transport Layer in High‐Performance Perovskite Solar Cells

As the key component in efficient perovskite solar cells, the electron transport layer (ETL) can selectively collect photogenerated charge carriers produced in perovskite absorbers and prevent the recombination of carriers at interfaces, thus ensuring a high power conversion efficiency. Compared with the conventional single‐ or dual‐layered ETLs, a gradient heterojunction (GHJ) strategy is more attractive to facilitate charge separation because the potential gradient created at an appropriately structured heterojunction can act as a driving force to regulate the electron transport toward a desired direction. Here, a SnO₂/TiO₂ GHJ interlayer configuration inside the ETL is reported to simultaneously achieve effective extraction and efficient transport of photoelectrons. With such an interlayer configuration, the GHJs formed at the perovskite/ETL interface act collectively to extract photogenerated electrons from the perovskite layer, while GHJs formed at the boundaries of the interconnected SnO₂ and TiO₂ networks throughout the entire ETL layer can extract electron from the slow electron mobility TiO₂ network to the high electron mobility SnO₂ network. Devices based on GHJ ETL exhibit a champion power conversion efficiency of 18.08%, which is significantly higher than that obtained from the compact TiO₂ ETL constructed under the comparable conditions.     

Improving the Extraction of Photogenerated Electrons with SnO2 Nanocolloids for Efficient Planar Perovskite Solar Cells

Great attention to cost‐effective high‐efficiency solar power conversion of trihalide perovskite solar cells (PSCs) has been hovering at high levels in the recent 5 years. Among PSC devices, admittedly, TiO₂ is the most widely used electron transport layer (ETL); however, its low mobility which is even less than that of CH₃NH₃PbI₃ makes it not an ideal material. In principle, SnO₂ with higher electron mobility can be regarded as a positive alternative. Herein, a SnO₂ nanocolloid sol with ≈3 nm in size synthesized at 60 °C was spin‐coated onto the fuorine‐doped tin oxide (FTO) glass as the ETL of planar CH₃NH₃PbI₃ perovskite solar cells. TiCl₄ treatment of SnO₂‐coated FTO is found to improve crystallization and increase the surface coverage of perovskites, which plays a pivotal role in improving the power conversion efficiency (PCE). In this report, a champion efficiency of 14.69% (J_sc = 21.19 mA cm^?2, V_oc = 1023 mV, and FF = 0.678) is obtained with a metal mask at one sun illumination (AM 1.5G, 100 mW cm^?2). Compared to the typical TiO₂, the SnO₂ ETL efficiently facilitates the separation and transportation of photogenerated electrons/holes from the perovskite absorber, which results in a significant enhancement of photocurrent and PCE.     

Stabilizing Bottom Side of Perovskite via Preburying Cesium Formate toward Efficient and Stable Solar Cells

The fragile bottom side of perovskite films is demonstrated to be harmful to the efficiency and stability of perovskite solar cells (PSCs) because the carrier extraction and recombination can be significantly influenced by the easily formed strain, voids, and defects on the bottom side. Nevertheless, the bottom side of perovskite films is usually overlooked because it remains a challenge to directly characterize and modify the bottom side. Herein, a facile and effective strategy is reported to stabilize the bottom side via preburying cesium formate (CsFo) into the SnO₂ electron transport layer (ETL). It is found that the synergistic effect of cesium cation (Cs⁺) and formate anion (HCOO⁻) causes strain relaxation, void elimination, and defects’ reduction, which further facilitate the charge extraction. Consequently, the champion power conversion efficiency (PCE) of formamidinium (FA)-based PSCs is increased from 23.34% to 24.50%. Meanwhile, the ultraviolet (UV), thermal, and operational stability are also enhanced. Finally, formamidinium–cesium (FACs)-based PSCs are investigated to confirm the effectiveness of this preburied CsFo strategy, and the optimal device exhibits a champion PCE of 25.03% and a remarkably high fill factor (FF) of 85.65%.     

Inorganic Electron Transport Materials in Perovskite Solar Cells

In the past decade, the perovskite solar cell (PSC) has attracted tremendous attention thanks to the substantial efforts in improving the power conversion efficiency from 3.8% to 25.5% for single-junction devices and even perovskite-silicon tandems have reached 29.15%. This is a result of improvement in composition, solvent, interface, and dimensionality engineering. Furthermore, the long-term stability of PSCs has also been significantly improved. Such rapid developments have made PSCs a competitive candidate for next-generation photovoltaics. The electron transport layer (ETL) is one of the most important functional layers in PSCs, due to its crucial role in contributing to the overall performance of devices. This review provides an up-to-date summary of the developments in inorganic electron transport materials (ETMs) for PSCs. The three most prevalent inorganic ETMs (TiO₂, SnO_2, and ZnO) are examined with a focus on the effects of synthesis and preparation methods, as well as an introduction to their application in tandem devices. The emerging trends in inorganic ETMs used for PSC research are also reviewed. Finally, strategies to optimize the performance of ETL in PSCs, effects the ETL has on J–V hysteresis phenomenon and long-term stability with an outlook on current challenges and further development are discussed.     

Highly Improved Photocurrent Density and Efficiency of Perovskite Solar Cells via Inclined Fluorine Sputtering Process (Adv. Funct. Mater. 25/2023)

Increase in incident light and surface modification of the charge transport layer are powerful routes to achieve high-performance efficiency of perovskite solar cells (PSCs) by improving the short-circuit current density (J_SC) and charge transport characteristics, respectively. However, few techniques are studied to reduce reflection loss and simultaneously improve the electrical performance of the electron transport layer (ETL). Herein, an inclined fluorine (F) sputtering process to fabricate high-performance PSCs is proposed. The proposed process simultaneously implements the antireflection effect of F coating and the effect of F doping on a TiO₂ ETL, which increases the amount of light transmitted into the PSC due to the extremely low refractive index (≈1.39) and drastically improves the electrical properties of TiO₂. Consequently, the J_SC of the F coating and doping perovskite solar cell (F-PSC) increased from 25.05 to 26.01 mA cm⁻², and the power conversion efficiency increased from 24.17% to 25.30%. The unencapsulated F-PSC exhibits enhanced air stability after 900 h of exposure to ambient environment atmosphere (30% relative humidity, 25 °C under dark condition). The inclined F sputtering process in this study can become a universal method for PSCs from the development stage to commercialization in the future.     

Tailoring the Interface in FAPbI3 Planar Perovskite Solar Cells by Imidazole-Graphene-Quantum-Dots

Organic–inorganic hybrid perovskites have reached an unprecedented high efficiency in photovoltaic applications, which makes the commercialization of perovskite solar cells (PSCs) possible. In the past several years, particular attention has been paid to the stability of PSC devices, which is a critical issue for becoming a practical photovoltaic technology. In particular, the interface-induced degradation of perovskites should be the dominant factor causing poor stability. Here, imidazole bromide functionalized graphene quantum dots (I-GQDs) are demonstrated to regulate the interface between the electron transport layer (ETL) and formamidinium lead iodide (FAPbI₃) perovskite layer. The incorporation of I-GQDs not only reduces the interface defects for achieving a better energy level alignment between ETL and perovskite, but also improves the film quality of FAPbI₃ perovskite including enlarged grain size, lower trap density, and a longer carrier lifetime. Consequently, the planar FAPbI₃ PSCs with I-GQDs regulation achieve a high efficiency of 22.37% with enhanced long-term stability.     

Scalable Fabrication of Stable High Efficiency Perovskite Solar Cells and Modules Utilizing Room Temperature Sputtered SnO2 Electron Transport Layer

Stability and scalability have become the two main challenges for perovskite solar cells (PSCs) with the research focus in the field advancing toward commercialization. One of the prerequisites to solve these challenges is to develop a cost‐effective, uniform, and high quality electron transport layer that is compatible with stable PSCs. Sputtering deposition is widely employed for large area deposition of high quality thin films in the industry. Here the composition, structure, and electronic properties of room temperature sputtered SnO₂ are systematically studied. Ar and O₂ are used as the sputtering and reactive gas, respectively, and it is found that a highly oxidizing environment is essential for the formation of high quality SnO₂ films. With the optimized structure, SnO₂ films with high quality have been prepared. It is demonstrated that PSCs based on the sputtered SnO₂ electron transport layer show an efficiency up to 20.2% (stabilized power output of 19.8%) and a T₈₀ operational lifetime of 625 h. Furthermore, the uniform and thin sputtered SnO₂ film with high conductivity is promising for large area solar modules, which show efficiencies over 12% with an aperture area of 22.8 cm² fabricated on 5 × 5 cm² substrates (geometry fill factor = 91%), and a T₈₀ operational lifetime of 515 h.     

Fully High‐Temperature‐Processed SnO2 as Blocking Layer and Scaffold for Efficient,Stable, and Hysteresis‐Free Mesoporous Perovskite Solar Cells

Planar perovskite solar cells (PSCs) based on low‐temperature‐processed (LTP) SnO₂ have demonstrated excellent photovoltaic properties duo to the high electron mobility, wide bandgap, and suitable band energy alignment of LTP SnO₂. However, planar PSCs or mesoporous (mp) PSCs based on high‐temperature‐processed (HTP) SnO₂ show much degraded performance. Here, a new strategy with fully HTP Mg‐doped quantum dot SnO₂ as blocking layer (bl) and a quite thin SnO₂ nanoparticle as mp layer are developed. The performances of both planar and mp PSCs has been greatly improved. The use of Mg‐SnO₂ in planar PSCs yields a high‐stabilized power conversion efficiency (PCE) of close to 17%. The champion of mp cells exhibits hysteresis free and stable performance with a high‐stabilized PCE of 19.12%. The inclusion of thin mp SnO₂ in PSCs not only plays a role of an energy bridge, facilitating electrons transfer from perovskite to SnO₂ bl, but also enhances the contact area of SnO₂ with perovskite absorber. Impedance analysis suggests that the thin mp layer is an “active scaffold” selectively collecting electrons from perovskite and can eliminate hysteresis and effectively suppress recombination. This is an inspiring advance toward high‐performance PSCs with HTP mp SnO₂.     

Porous Organic Cage Induced Spontaneous Restructuring of Buried Interface Toward High-Performance Perovskite Photovoltaic

In perovskite solar cells (PSCs), the buried interface containing high concentrations of defects is critical for efficient charge extraction toward high-performance device. Herein, porous organic cage (POC) is introduced between tin dioxide and perovskite to spontaneously reconstitute the buried interface. Through the chemical linkage formed by polydentate chelation of POC with SnO₂ and perovskite, the buried interface achieves greatly reduced defect density and enhanced carrier extraction. More importantly, it is found that iodide ions in aged devices to migrate down to the electron transport layer and even invade the ITO electrode, changing the work function of ITO. This detrimental effect can be well resolved by POC since the host-guest interaction of POC can effectively suppress the iodide ions trying to migrate downward. As a result, the PSC fabricated by POC-restructured strategy yields a superior PCE of 24.13%. Moreover, the unencapsulated PSCs exhibit conspicuous improved long-term stability and retain 93% of its initial efficiency after 5000 h in ambient condition.     

Dual Interfacial Modification Engineering with 2D MXene Quantum Dots and Copper Sulphide Nanocrystals Enabled High‐Performance Perovskite Solar Cells

The performance of perovskite solar cells (PSCs) strongly depends on the electron transport layer (ETL), perovskite absorber, hole transport layer (HTL), and their interfaces. Herein, the first approach to utilize ultrathin 2D titanium‐carbide MXenes (Ti₃C₂T_x quantum dots, TQD) by engineering the perovskite/TiO₂ ETL interface and perovskite absorber and introducing Cu_1.8S nanocrystals to perfect the Spiro‐OMeTAD HTL is represented. A significant hysteresis‐free power conversion efficiency improvement from 18.31% to 21.64% of PSCs is achieved after modifications with the enhanced short‐circuit current density, open‐circuit voltages, and fill factor. Various advanced characterizations, including femtosecond transient absorption spectroscopy, electrochemical impedance spectroscopy, and ultraviolet photoelectron spectroscopy, elucidate that the TQD/Cu_1.8S significantly contribute to the improved crystalline quality of the perovskite film with its large grain size and improved electron/holes extraction efficiencies at perovskite/ETL and perovskite/HTL interfaces. Furthermore, the long‐time ambient and light stability of PSCs are largely boosted through the TQD and/or Cu_1.8S nanocrystals doping, originating from the better crystallization of perovskite, suppressing the film aggregation and crystallization of HTL, and inhibiting the ultraviolet‐induced photocatalysis of the ETL. The findings highlight the TQD and Cu_1.8S can act as a superfast electrons and holes tunnel for the optoelectronic devices.     

Carbon Nanotube Based Inverted Flexible Perovskite Solar Cells with All‐Inorganic Charge Contacts

Organolead halide perovskite solar cells (PSC) are arising as promising candidates for next‐generation renewable energy conversion devices. Currently, inverted PSCs typically employ expensive organic semiconductor as electron transport material and thermally deposited metal as cathode (such as Ag, Au, or Al), which are incompatible with their large‐scale production. Moreover, the use of metal cathode also limits the long‐term device stability under normal operation conditions. Herein, a novel inverted PSC employs a SnO₂‐coated carbon nanotube (SnO₂@CSCNT) film as cathode in both rigid and flexible substrates (substrate/NiO‐perovskite/Al₂O₃‐perovskite/SnO₂@CSCNT‐perovskite). Inverted PSCs with SnO₂@CSCNT cathode exhibit considerable enhancement in photovoltaic performance in comparison with the devices without SnO₂ coating owing to the significantly reduced charge recombination. As a result, a power conversion efficiency of 14.3% can be obtained on rigid substrates while the flexible ones achieve 10.5% efficiency. More importantly, SnO₂@CSCNT‐based inverted PSCs exhibit significantly improved stability compared to the standard inverted devices made with silver cathode, retaining over 88% of their original efficiencies after 550 h of full light soaking or thermal stress. The results indicate that SnO₂@CSCNT is a promising cathode material for long‐term device operation and pave the way toward realistic commercialization of flexible PSCs.     

Synergistic Passivation and Down-Conversion by Imidazole-Modified Graphene Quantum Dots for High Performance and UV-Resistant Perovskite Solar Cells

Organic–inorganic hybrid perovskite solar cells (PVSCs) have achieved stunning progress during the past decade, which has inspired great potential for future commercialization. However, tin dioxide (SnO₂) as a commonly used electron transport layer with varied defects and energy level mismatch with perovskite contributes to the energy loss and limitation of charge extraction. Herein, imidazole-modified graphene quantum dots (IGQDs) are introduced as the interlayer, which plays a significant role in three aspects: 1) dually passivating the defects of SnO₂ and buried interface of perovskite by first-principles calculations; 2) accelerating the carrier extraction and transfer owing to ideal band alignment; and 3) improving light utilization through down-conversion proved by light intensity measurement. Consequently, the devices based on IGQDs/SnO₂ not only exhibit the champion power conversion efficiency (PCE) of 24.11%, but display a significantly enhanced ultraviolet (UV) stability retaining about 81% of their initial PCEs after continuous UV irradiation (365 nm, 20 mW cm⁻²) for 300 h. Moreover, the unencapsulated modified device remains 82% after storing for 1650 h in air (20–30 °C, RH 45–55%). This work furnishes a novel method for the combination of interfacial passivation and photon management, which holds out for the prospect of employment in other optoelectronic applications.     

Engineering of the Electron Transport Layer/Perovskite Interface in Solar Cells Designed on TiO2 Rutile Nanorods

The engineering of the electron transport layer (ETL)/light absorber interface is explored in perovskite solar cells. Single‐crystalline TiO₂ nanorod (NR) arrays are used as ETL and methylammonium lead iodide (MAPI) as light absorber. A dual ETL surface modification is investigated, namely by a TiCl₄ treatment combined with a subsequent PC₆₁BM monolayer deposition, and the effects on the device photovoltaic performance were evaluated with respect to single modifications. Under optimized conditions, for the combined treatment synergistic effects are observed that lead to remarkable enhancements in cell efficiency, from 14.2% to 19.5%, and to suppression of hysteresis. The devices show J_SC, V_OC, and fill factor as high as 23.2 mA cm^?2, 1.1 V, and 77%, respectively. These results are ascribed to a more efficient charge transfer across the ETL/perovskite interface, which originates from the passivation of defects and trap states at the ETL surface. To the best of our knowledge, this is the highest cell performance ever reported for TiO₂ NR‐based solar cells fabricated with conventional MAPI light absorber. Perspective wise, this ETL surface functionalization approach combined with more recently developed and better performing light absorbers, such as mixed cation/anion hybrid perovskite materials, is expected to provide further performance enhancements.     

Enhanced Stability of Perovskite Solar Cells with Low‐Temperature Hydrothermally Grown SnO2 Electron Transport Layers

Perovskite solar cells (PSCs) may offer huge potential in photovoltaic conversion, yet their practical applications face one major obstacle: their low stability, or quick degradation of their initial efficiencies. Here, a new design scheme is presented to enhance the PSC stability by using low‐temperature hydrothermally grown hierarchical nano‐SnO₂ electron transport layers (ETLs). The ETL contains a thin compact SnO₂ layer underneath a mesoporous layer of SnO₂ nanosheets. The mesoporous layer plays multiple roles of enhancing photon collection, preventing moisture penetration and improving the long‐term stability. Through such simple approaches, PSCs with power conversion efficiencies of ≈13% can be readily obtained, with the highest efficiency to be 16.17%. A prototypical PSC preserves 90% of its initial efficiency even after storage in air at room temperature for 130 d without encapsulation. This study demonstrates that hierarchical SnO₂ is a potential ETL for fabricating low‐cost and efficient PSCs with long‐term stability.